SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS
www.cobra.it
PETROL X
ALFA ROMEO 156 97 DIESEL
MAKE MOD. YEAR
ALARM/SIREN Position the compact alarms and the sirens behind the left or right lateral
headlamp, it depends on the vehicle version.
POSITION
CENTRAL UNIT POSITION The modular systems and the modules should be positioned under the
dashboard, drivers side.
POWER SUPPLY +30: connect to the general supply wiring at the entrance of the fuse box.
-31: connect directly to the car body.
IGNITION WIRE Connect to the RED/ORANGE wire located in the 20 way white connector in the
front part of the fuse box. Alternatively, in the wiring harness located under the sill
cover, drivers side.
DIRECTION INDICATORS Connect to the 1 mm2 LIGHT BLUE wire in the 20 way white connector and
LIGHT BLUE/BLACK in the 12 way connector. These connectors are located in
the front part of the fuse box, under the dashboard, drivers side. Alternatively in
the wiring harness under the sill cover, drivers side.
ELECTRIC WINDOWS Positive control signal
Front window, driver s side:
cut the BROWN/WHITE wire.
Front window, passenger s side:
cut the VIOLET/WHITE wire.
CENTRAL DOORS LOCKING Negative control signal
Connect to the 1 mm2 WHITE wire (lock) and LIGHT BLUE (unlock). These wires
are in the wiring harness and coming out of the right connector of the central door
locking unit located at the rear right side of the glove box.
IMMOBILISATION POINT 1 Fuel pump
Cut the 1 mm2 BROWN/WHITE wire located in the 20 way white connector in the
fuse box. Alternatively, in the wiring harness located under the sill cover, drivers
side.
IMMOBILISATION POINT 2 Cut the GREY/ORANGE wire coming out of the relay located in the relay holder
between the left former headlamp and the battery.
STARTER +50: Cut the 2 mm2 RED/BLACK wire located in the wiring harness coming out of
the connector of the ignition key.
BONNET SWITCH Install an additional switch on the front headlamp support grill, driver s side.
DOORS SWITCH Connect to the WHITE/BLUE wire located in the black connector under the left
side of the dashboard near the handle of the bonnet. Alternatively, in the wiring
harness under the sill cover, drivers side.
BOOT SWITCH Connect to the 1 mm2 RED wire located in the connector mentioned above.
al15697gbb.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
Wyszukiwarka
Podobne podstrony:
145 1997 petrol NO166 T S 1998 petrol NOGT 2004 petrol NOPT CRUISER 2001 petrol NOA4 2001 petrol NOX 5 2001 petrol NOA2 2004 2°sem 1 petrol NO530 2003 petrol NOA3 1998 petrol NOGTV 1999 petrol NOA6 1998 petrol NONEON 1996 petrol NOT T 2000 petrol NOwięcej podobnych podstron