Extending Tux Paint
version
0.9.18
Extending Tux Paint
Copyright 2002-2007 by Bill Kendrick and others
New Breed Software
bill@newbreedsoftware.com
http://www.tuxpaint.org/
June 14, 2002 - August 2, 2007
If you wish to add or change things like Brushes and Rubber Stamps
used by Tux Paint, you can do it fairly easily by simply putting
or removing files on your hard disk.
Note: You'll need to restart Tux Paint for the changes to take
effect.
Where Files Go
Standard Files
Tux Paint looks for its various data files in its
'data' directory.
Linux and Unix
Where this directory goes depends on what value was set for
"DATA_PREFIX" when Tux Paint was built. See
INSTALL.txt for details.
By default, though, the directory is:
/usr/local/share/tuxpaint/
If you installed from a package, it is more likely to be:
/usr/share/tuxpaint/
Windows
Tux Paint looks for a directory called 'data' in the same
directory as the executable. This is the directory that the
installer used when installing Tux Paint e.g.:
C:\Program Files\TuxPaint\data
Mac OS X
Tux Paint stores its data files inside the "Tux Paint"
icon (which is actually a special kind of folder on
Mac OS X). The following steps explain how to get to
the folders within:
Bring up a 'context' menu by holding the [Control] key and clicking
the Tux Paint icon the in Finder. (If you have a mouse with more
than one button, you can simply right-click the icon.)
Select "Show Contents" from the menu that appears.
A new Finder window will appear with a folder inside called
"Contents."
Open the "Contents" folder and open the "Resources" folder found
inside.
There, you will find the "starters", "stamps" and "brushes"
folders. Adding new content to these folders will make the content
available to any user that launches this copy (icon) of
Tux Paint.
Note: If you install a newer version of Tux Paint
(by replacing its icon), you will lose changes made by following
the instructions above, so keep backups of your new content
(stamps, brushes, etc.).
Tux Paint also looks for files in a "TuxPaint" folder
that you can place in your system's "Application Support" folder
(found under "Library" at the root of your hard disk):
/Library/Application Support/TuxPaint/
It also looks for files in the user's "Preferences" folder,
e.g.:
/Users/(user name)/Library/Preferences/TuxPaint/brushes/
Personal Files
You can also create brushes, stamps, fonts and 'starters' in your
own directory (folder) for Tux Paint to find.
Windows
Your personal Tux Paint folder is stored in your
"Application Data". For example, on newer Windows (set up
for an English-speaking user):
C:\Documents and Settings\(user name)\Application
Data\TuxPaint\
Mac OS X
Your personal Tux Paint folder is stored in your
"Library" folder:
/Users/(user name)/Library/Application Support/
Tux Paint/
Linux and Unix
Your personal Tux Paint directory is
"$(HOME)/.tuxpaint/" (also known as
"~/.tuxpaint/".
That is, if your home directory is "/home/karl", then
your Tux Paint directory is
"/home/karl/.tuxpaint/".
Don't forget the period (".") before the
'tuxpaint'!
To add brushes, stamps fonts, and 'starters,' create subdirectories
under your personal Tux Paint directory named
"brushes", "stamps",
"fonts" and
"starters" respectively.
(For example, if you created a brush named "flower.png",
you would put it in "~/.tuxpaint/brushes/" under Linux or
Unix.)
Brushes
The brushes used for drawing with the 'Brush' and 'Lines' tools in
Tux Paint are simply PNG image files.
The alpha (transparency) of the PNG image is used to determine the shape
of the brush, which means that the shape can be 'anti-aliased' and even
partially-transparent!
Greyscale pixels in the brush PNG will be drawn using the
currently-selected color in Tux Paint. Color pixels will be
tinted.
Brush images should be no wider than 40 pixels across and
no taller than 40 pixels high. (i.e., the maximum size
can be 40 x 40.)
Brush Options
Aside from a graphical shape, brushes can also be given other
attributes. To do this, you need to create a 'data file'
for the brush.
A brush data file is simply a text file containing the options.
The file has the same name as the PNG image, but a ".dat"
extension. (e.g., "brush.png"'s data file is the text
file "brush.dat" in the same directory.)
Brush Spacing
As of Tux Paint version 0.9.16, you can now specify the spacing
for brushes (that is, how often they are drawn). By default, the
spacing will be the brush's height, divided by 4.
Add a line containing the line "spacing=N"
to the brush's data file, where N is the spacing you want
for the brush. (The lower the number, the more often the brush is
drawn.)
Animated Brushes
As of Tux Paint version 0.9.16, you may now create animated
brushes. As the brush is used, each frame of the animation is
drawn.
Lay each frame out across a wide PNG image. For example,
if your brush is 30x30 and you have 5 frames, the image should
be 150x30.
Add a line containing the line "frames=N"
to the brush's data file, where N is the number of frames
in the brush.
Note: If you'd rather the frames be flipped through
randomly, rather than sequentially, also add a line containing
"random" to the brush's data file.
Directional Brushes
As of Tux Paint version 0.9.16, you may now create directional
brushes. As the brush is used, different shapes are drawn, depending
on the direction the brush is going.
The directional shapes are divided into a 3x3 square in a PNG image.
For example, if your brush is 30x30, the image should be 90x90, and
each of the direction's shapes placed in a 3x3 grid. The center
region is used for no motion. The top right is used for motion that's
both up, and to the right. And so on.
Add a line containing the line "directional"
to the brush's data file.
Animated Directional Brushes
You may mix both animated and directional features into one
brush. Use both options ("frames=N" and
"directional"), in separate lines in the
brush's "".dat" file.
Lay the brush out so that each 3x3 set of directional shapes are
laid out across a wide PNG image. For example, if the brush is 30x30
and there are 5 frames, it would be 450x90. (The leftmost 150x90 pixels
of the image represent the 9 direction shapes for the first frame,
for example.)
Place the brush image PNGs (and any data text files) in the
"brushes" directory.
Note: If your new brushes all come out as solid squares or rectangles,
it's because you forgot to use alpha transparency! See the documentation
file "PNG.txt" for more information and tips.
Stamps
All stamp-related files go in the "stamps" directory.
It's useful to create subdirectories and sub-subdirectories
there to organize the stamps. (For example, you can have a
"holidays" folder with "halloween" and
"christmas" sub-folders.)
Images
Rubber Stamps in Tux Paint can be made up of a number of separate
files. The one file that is required is, of course, the picture
itself.
As of Tux Paint version 0.9.17, Stamps may be either PNG
bitmap images or SVG vector images. They can be full-color or greyscale.
The alpha (transparency) channel of PNGs is used to determine the actual
shape of the picture (otherwise you'll stamp a large rectangle on your
drawings).
PNGs can be any size, and Tux Paint (by default) provides
a set of sizing buttons to let the user scale the stamp up (larger)
and down (smaller).
SVGs are vector-based, and will be scaled appropriately for the
canvas being used in Tux Paint.
Note: If your new PNG stamps all have solid rectangular-shaped outlines
of a solid color (e.g., white or black), it's because you forgot to use
alpha transparency! See the documentation file
"PNG.txt" for more information and tips.
Note: If your new SVG stamps seem to have a lot of whitespace,
make sure the SVG 'document' is no larger than the shape(s) within.
If they are being clipped, make sure the 'document' is large enough
to contain the shape(s). See the documentation file
"SVG.txt" for more information and tips.
Advanced Users: The
Advanced Stamps HOWTO describes,
in detail, how to make PNG images which will scale perfectly when used as
stamps in Tux Paint.
Description Text
Text (".TXT") files with the same name as the PNG or SVG.
(e.g., "picture.png"'s description is stored in
"picture.txt" in the same directory.)
The first line of the text file will be used as the US English
description of the stamp's image. It must be encoded in UTF-8.
Language Support
Additional lines can be added to the text file to provide
translations of the description, to be displayed when Tux Paint
is running in a different locale (like French or Spanish).
The beginning of the line should correspond to the language code
of the language in question (e.g., "fr" for French, and
"zh_tw" for Traditional Chinese), followed by
".utf8=" and the translated description (encoded
in UTF-8).
There are scripts in the "po" directory for converting
the text files to PO format (and back) for easy translation to
different languages. Therefore you should never add or change translations
in the .txt files directly.
If no translation is available for the language Tux Paint
is currently running in, the US English text is used.
Windows Users
Use NotePad or WordPad to edit/create these files.
Be sure to save them as Plain Text, and make sure they have
".txt" at the end of the filename...
Sound Effects
WAVE (".wav") or OGG Vorbis (".ogg")
files with the same name as the PNG or SVG.
(e.g., "picture.svg"'s sound effect is the sound file
"picture.wav" in the same directory.)
Language Support
For sounds for different locales (e.g., if the sound is someone
saying a word, and you want translated versions of the word said),
also create WAV or OGG files with the locale's label in the filename, in
the form: "STAMP_LOCALE.EXT"
"picture.png"'s sound effect, when Tux Paint is run
in Spanish mode, would be "picture_es.wav".
In French mode, "picture_fr.wav". And so on...
If no localized sound effect can be loaded, Tux Paint will
attempt to load the 'default' sound file.
(e.g., "picture.wav")
Note: For descriptive sounds (not sound effects, like a bang or
a bird chirping), consider using the Descriptive Sounds,
described below.
Descriptive Sound
WAVE (".wav") or OGG Vorbis (".ogg")
files with the same name as the PNG or SVG, followed by
"_desc" (e.g., "picture.svg"'s descriptive
sound is the sound file "picture_desc.ogg" in the same
directory.)
Language Support
For descriptions in different languages,
also create WAV or OGG files with both "_desc" and
the locale's label in the filename, in
the form: "STAMP_desc_LOCALE.EXT"
"picture.png"'s descriptive sound, when Tux Paint
is run in Spanish mode, would be "picture_desc_es.wav".
In French mode, "picture_desc_fr.wav". And so on...
If no localized descriptive sound can be loaded, Tux Paint will
attempt to load the 'default' descriptive sound file.
(e.g., "picture_desc.wav")
Stamp Options
Aside from a graphical shape, a textual description, and a sound
effect, stamps can also be given other attributes. To do this, you need
to create a 'data file' for the stamp.
A stamp data file is simply a text file containing the options.
The file has the same name as the PNG or SVG image, but a
".dat" extension. (e.g., "picture.png"'s
data file is the text file "picture.dat" in the same
directory.)
Colored Stamps
Stamps can be made to be either "colorable" or "tintable."
Colorable
"Colorable" stamps they work much like brushes - you pick the stamp
to get the shape, and then pick the color you want it to be.
(Symbol stamps, like the mathematical and musical ones, are an
example.)
Nothing about the original image is used except the transparency
(from "alpha" channel). The color of the stamp comes out solid.
Add a line containing the word "colorable"
to the stamp's data file.
Tinted
"Tinted" stamps are similar to "colorable" ones, except the
details of the original image are kept. (To put it technically,
the original image is used, but its hue is changed, based on the
currently-selected color.)
Add a line containing the word "tintable"
to the stamp's data file.
Tinting Options:
Depending on the contents of your stamp, you might want to
have Tux Paint use one of a numer of methods when tinting it.
Add one of the following lines to the stamp's data file:
"tinter=normal" (default)
This is the normal tinting mode. (Hue range is
+/- 18 degrees, 27 replace.)
"tinter=anyhue"
This remaps all hues in the stamp. (Hue range is
+/- 180 degrees.)
"tinter=narrow"
This like 'anyhue', but a narrower hue angle.
(Hue range is +/- 6 degrees, 9 replace.)
"tinter=vector"
This is map 'black through white' to
'black through destination'.
Unalterable Stamps
By default, a stamp can be flipped upside down, shown as a mirror
image, or both. This is done using the control buttons below the
stamp selector, at the lower right side of the screen in
Tux Paint.
Sometimes, it doesn't make sense for a stamp to be flippable or
mirrored; for example, stamps of letters or numbers.
Sometimes stamps are symmetrical, so letting the user flip or mirror
them isn't useful.
To make a stamp un-flippable, add the option
"noflip" to the stamp's data file.
To keep a stamp from being mirrored, add a line containing the word
"nomirror" to the stamp's data file.
Initial Stamp Size
By default, Tux Paint assumes that your stamp is sized
appropriately for unscaled display on a 608x472 canvas. This is
the original Tux Paint canvas size, provided by a 640x480 screen.
Tux Paint will then adjust the stamp according to the current
canvas size and, if enabled, the user's stamp size controls.
If your stamp would be too big or too small, you can specify
a scale factor. If your stamp would be 2.5 times as wide (or tall)
as it should be, add the option "scale 40%" or
"scale 5/2" or "scale 2.5"
or "scale 2:5" to your image. You may include
an "=" if you wish, as in
"scale=40%".
Windows Users
You can use NotePad or WordPad to create these file.
Be sure to save it as Plain Text, and make sure the filename
has ".dat" at the end, and not ".txt"...
Pre-Mirrored and Flipped Images
In some cases, you may wish to provide a pre-drawn version of
a stamp's mirror-image, flipped image, or even both. For example,
imagine a picture of a fire truck with the words
"Fire Department" written across the side. You probably
do not want that text to appear backwards when the image is flipped!
To create a mirrored version of a stamp that you want Tux Paint
to use, rather than mirroring one on its own, simply create a second
".png" or ".svg" graphics file with the
same name, except with "_mirror" before the filename
extension.
For example, for the stamp "truck.png" you would
create another file named "truck_mirror.png", which
will be used when the stamp is mirrored (rather than using a
backwards version of 'truck.png').
As of Tux Paint 0.9.18, you may similarly provide a pre-flipped
image with "_flip" in the name, and/or an image that
is both mirrored and flipped, by naming it
"_mirror_flip".
Note: If the user flips and mirrors an image, and a pre-drawn
"_mirror_flip" doesn't exist, but either "_flip"
or "_mirror" does, it will be used, and mirrored or flipped,
respectively.
Fonts
The fonts used by Tux Paint are TrueType Fonts (TTF).
Simply place them in the "fonts" directory.
Tux Paint will load the font and provide four different sizes
in the 'Letters' selector when using the 'Text' tool.
'Starters'
'Starter' images appear in the 'Open' dialog, along with pictures
you've created. They have a green button background, instead of blue.
Unlike your saved pictures, however, when you select and open a
'starter,' you're actually creating a new drawing. Instead of being
blank, though, the new drawing contains the contents of the 'starter.'
Additionally, as you edit your new picture, the contents of the
original 'starter' affect it.
Coloring-Book Style
The most basic kind of 'starter' is similar to a picture in a coloring
book. It's an outline of a shape which you can then color in and
add details to. In Tux Paint, as you draw, type text, or stamp
stamps, the outline remains 'above' what you draw. You can erase the
parts of the drawing you made, but you can't erase the outline.
To create this kind of 'starter' image, simply draw an outlined
picture in a paint program, make the rest of the graphic transparent
(that will come out as white in Tux Paint), and save it as a
PNG format file.
Scene-Style
Along with the 'coloring-book' style overlay, you can also provide
a separate background image as part of a 'starter' picture. The
overlay acts the same: it can't be drawn over, erased, or affected by
'Magic' tools. However, the background can be!
When the 'Eraser' tool is used on a picture based on this kind of
'starter' image, rather than turning the canvas white, it returns that
part of the canvas to the original background picture.
By creating both an overlay and a background, you can create a
'starter' which simulates depth. Imagine a background that shows
the ocean, and an overlay that's a picture of a reef. You can then
draw (or stamp) fish in the picture. They'll appear in the ocean,
but never 'in front of' the reef.
To create this kind of 'starter' picture, simply create an overlay
(with alpha transparency) as described above, and save it as a PNG.
Then create another image (without transparency), and save it with
the same filename, but with "-back" appended to the
name. (e.g., "reef-back.png" would be the background
ocean picture that corresponds to the "reef.png"
overlay, or foreground.)
The 'starter' images should be the same size as Tux Paint's
canvas. In the default 640x480 mode, that is 448x376 pixels.
If you're using 800x600 mode, it should be 608x496. (It should be
192 pixels less wide, and 104 pixels less tall than the resolution.)
Place them in the "starters" directory.
When the 'Open' dialog is accessed in Tux Paint, the 'starter'
images will appear at the beginning of the list with a green background.
Note: 'Starters' can't be saved over from within Tux Paint,
since loading a 'starter' is really like creating a new image.
(Instead of being blank, though there's already something there to work
with.) The 'Save' command simply creates a new picture, like it would
if the 'New' command had been used.
Note: 'Starters' are 'attached' to saved pictures, via a
small text file that has the same name as the saved file, but with
".dat" as the extension. This allows the overlay and
background, if any, to continue to affect the drawing even after
Tux Paint has been quit, or another picture loaded or started.
(In other words, if you base a drawing on a 'starter' image, it will
always be affected by it.)
Translations
Tux Paint supports numerous languages, thanks to use of the
"gettext" localization library. (See OPTIONS
for how to change locales in Tux Paint.)
To translate Tux Paint to a new language, copy the translation
template file, "tuxpaint.pot" (found in Tux Paint's
source code, in the folder "src/po/"). Rename the copy as a
".po" file, with an appropriate name for the locale you're
translating to (e.g., "es.po" for Spanish; or
"pt_br.po" for Brazilian Portuguese, versus
"pt.po" or "pt_pt.po" for Portuguese spoken in
Portugal.)
Open the newly-created ".po" file — you can edit
in a plain text edtior, such as Emacs, Pico or VI on Linux, or
NotePad on Windows. The original English text used in Tux Paint
is listed in lines starting with "msgid". Enter your
translations of each of these pieces of text in the empty
"msgstr" lines directly below the corresponding
"msgid" lines. (Note: Do not remove the quotes.)
Example:
msgid "Smudge"
msgstr "Manchar"
msgid "Click and move to draw large bricks."
msgstr "Haz clic y arrastra para dibujar ladrillos grandes."
A graphical tool, called poEdit
(http://www.poedit.net/), is available
for Linux, Windows and Mac OS X.
Note: It is best to always work off of the latest
Tux Paint text catalog template ("tuxpaint.pot"),
since new text is added, and old text is occasionally changed.
The text catalog for the upcoming, unreleased version of Tux Paint
can be found in Tux Paint's CVS repository
(see: http://www.tuxpaint.org/download/source/cvs/),
and on the Tux Paint website at
http://www.tuxpaint.org/help/po/.
To edit an existing translation, download the latest ".po"
file for that language, and edit it as described above.
You may send new or edited translation files to Bill Kendrick,
lead developer of Tux Paint, at:
bill@newbreedsoftware.com,
or post them to the "tuxpaint-i18n" mailing list
(see: http://www.tuxpaint.org/lists/).
Alternatively, if you have an account with
SourceForge.net, you can request
to be added to the "tuxpaint" project and receive write-access
to the CVS source code repository so that you may commit your changes
directly.
Note: Additional locale support also requires additions
to Tux Paint's source code (/src/i18n.h and
/src/i18n.c), and requires updates to the Makefile,
to have the ".po" gettext catalog source files compiled into
".mo" files, and installed, for use at runtime.
Alternative Input Methods
As of version 0.9.17, Tux Paint's "Text" tool can provide
alternative input methods for some languages. For example, when
Tux Paint is running with a Japanese locale, the
right [Alt] key can be pressed to cycle between Latin,
Romanized Hiragana and Romanized Katakana modes.
This allows native characters and words to be entered into the "Text" tool by
typing one or more keys on a keyboard with Latin characters (e.g., a
US QWERTY keyboard).
To create an input method for a new locale, create a text file
with a name based on the locale (e.g., "ja" for Japanese),
with ".im" as the extension (e.g., "ja.im").
The ".im" file can have multiple character mapping sections
for different character mapping modes. For example, on a Japanese typing
system, typing [K] [A] in Hiragana mode generates a
different Unicode character than typing
[K] [A] in Katakana mode.
List the character mappings in this file, one per line. Each line should
contain (separated by whitespace):
the Unicode value of the character, in hexadecimal
(more than one character can be listed, separated by a colon (':'),
this allowing some sequences to map to words)
the keycode sequence (the ASCII characters that must be entered to
generate the Unicode character)
a flag (or "-")
Start additional character mapping sections with a line containign the word
"section".
Example:
# Hiragana
304B ka -
304C ga -
304D ki -
304E gi -
304D:3083 kya -
3063:305F tta -
# Katakana
section
30AB ka -
30AC ga -
30AD ki -
30AE gi -
Note: Blank lines within the ".im" file
will be ignored, as will any text following a "#"
(pound/hash) character — it can be used to denote comments,
as seen in the example above.
Note: Meanings of the flags are locale-specific, and are processed
by the language-specific source code in "src/im.c".
For example, "b" is used in Korean to handle
Batchim, which may carry over to the next character.
Note: Additional input method support also requires additions
to Tux Paint's source code (/src/im.c), and requires
updates to the Makefile,
to have the ".im" files installed, for use at runtime.
Wyszukiwarka
Podobne podstrony:
option extended valid elementskeyword extendsextend relationship?38D814EXTENDINGQ190987 Extended Stored Proceduresusing extended help?818AFEextending fm4$ extendThe Wolverine 2013 EXTENDED 1080p BluRay x264 SPARKSPSTL Extend siec dystrCanon Extender Ef 1 4X Repair ManualHONDA 2006 2007 Ridgeline Bed Extender User s Informationkeyword extendsCD Club Promo Only Extended December (24 12 2014) (9 CD) TracklistaExtendedextendedextending fm1extending fm3więcej podobnych podstron