SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
X
MAKE
RENAULT
MOD.
CLIO*
YEAR.
01 �ął PETROL
DIESEL
* Models with original equipment keyless entry system.
ALARM/SIREN
Position the compact alarms and the sirens on the wheel house, passenger’s side.
POSITION
CENTRAL UNIT POSITION
Position the modular systems and the modules under the dashboard, driver’s side.
POWER SUPPLY
+ 30: connect to the RED wire, at the position A3, in the P202 connector, under the dashboard, driver’s side.
- 31: connect to the BLACK wire, at the position A4, in the P202 connector, under the dashboard, driver’s side.
IGNITION WIRE
+ 15/54: connect to the YELLOW /VIOLET wire, at the position A4, in the 15 way P202 white connector located in the central under the dashboard, driver’s side.
DIRECTION INDICATORS
Connect to the WHITE/BROWN wire, at the position A3 and to the LIGHT VIOLET/BROWN
wire, at the position A2, in the 15 way P203 black connector, in the central placed under the dashboard, driver’s side.
ELECTRIC WINDOWS
Positive control signal
Front window, driver’s side: cut the LIGHT VIOLET wire, at the position B5, in a 15 way white connector, in the central placed under the dashboad, driver’s side.
Front window, passenger’s side: cut the WHITE/ORANGE wire in the bundle of cables coming out of the driver’s side door.
ACTIVAT./DEACTIVATION
Connections antitheft/vehicle CONTROLS
Art.38XX Vehicle Position GREY/BLACK WHITE Position B8 black connector.
YELLOW/BLACK GREEN Position B4 black connector.
ORANGE/WHITE +30 In the fuse box.
ORANGE +30 In the fuse box.
VIOLET PINK Position B1 serial switch.
VIOLET/WHITE Ground Car body.
The above mentioned black connector is located behind the left lateral bulkhead, near the switch lever.
Refer to the B diagram specified in the dedicated installation manual enclosed in the kit of the antitheft.
IMMOBILISATION POINT
Fuel pump
Cut the LIGHT BROWN wire, at the position A2, in the 26 way black connector, fixed behind the driver’s side bulkhead.
STARTER
+50: Cut the ORANGE wire located on the ignition key.
BONNET SWITCH
Install an additional switch on the front headlamp support plate, driver’s side.
FRONT DOORS
Connect to the GREEN wire, at the position nr. 40, in the 40 way black connector, in the SWITCH
central under the dashboard driver’s side.
REAR DOORS
Connect to the GREY wire, at the position nr. 30, in the 40 way black connector, in the central SWITCH
under the dashboard driver’s side.
BOOT SWITCH
Connect to the GREEN wire, at the position nr. 39, in the 40 way black connector, in the central under the dashboard driver’s side.
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed recli01gbbt.doc
as per the instructions given on the product installation manual.
Wyszukiwarka
Podobne podstrony:
RECLI01GBB id 2219571 NieznanyRECLI98GBBT id 2219575 NieznanyRECLI98GBB id 2219574 NieznanyRECLI97GBB id 2219573 NieznanyRECLI00GBB id 2491207 NieznanyREESP98GBDT id 2219579 NieznanyREESP01GBB id 2219576 NieznanyCISAX01GBD id 2064757 NieznanySGH 2200 id 2230801 Nieznany111003105109 stress id 2048457 NieznanyCIXS201GBD id 2064760 NieznanyTOCEL96GBB id 2491297 Nieznany1078 2 FEA209544 128UEN A id 22 NieznanyMcRib(r) Sandwich id 2201097 NieznanyBD V600 L3 C A3 V1[1] 1 id 2157 NieznanyDOC0534 id 2032985 Nieznany8 17 id 2009842 NieznanyREKAN02GBBT id 2491218 Nieznanywięcej podobnych podstron