Fadal 1 [SP] PM886 17 8


{
MILL=T
LATHE=F
SIMPLE_ROT_POS=T
ROTARY_MILL=F
ADV_MILL=F
SUBS=T
MILLTURN_Y-AXIS=F
METRIC=F
}

{added CRCOffC to rapid up and repeats, same as all other Fadal posts, 9/26/88 WFG}
{Changed max rpm from 10000 to 15000 JR 6/5/89}

{1/26/90, Updated: Fadal M003.58, to .69 format, JR}
{2/90/90, Updated: Fadal M003.69, to .70 format, JR}
{3/23/90, 15000 max RPM, JR}

{4/6/90
Added '01' literal for looping once on CallLab line at ZonlyRepAutoCycle & ZonlyRep subs.
DWB}

{7/24/90, Added InitProg globally to posts with this remark, DWB}
{7/24/90, Replaced all occurances of SetSRXYZero with SetSRXYtoSP, DWB}
{8/10/90, Updated: Fadal M003.71 to .74 format, JR}

{8/10/90
Copied & modified: Fadal M003.74
For: Admiral
Add CRCOffsetC & ResetCRCNum.
Change to First Tool Not In Spindle.
OpToolID & ToolChng on same line.
WFO's output for MultipleParts & NewWFO only.
Added 'Z0H0' for offset cancel (full up) with CoolOff on same line.
Remove StrtPos from drill cycle line.
CoolOn on same line as OfstOn.
Combine M codes on 1 line.
Jim Radcliffe}

{4/03/91
Modified: Fadal (AEM) M332.74
For: Gibbs & Associates
Updated to Version 4.0 per Fanuc 6M M001.80 Format.
DWB}

{7/2/92
Copied & modified from Fadal (AEM) M332.79
New designation Fadal Format 1 (AC) M509.81.2
For Amcraft
Add WFO to move to StrtPos.
Add StrtPos to WFO's at multi parts.
Change 'Z0H0' to 'G0G49Z0' for offset cancel and remove CoolOff except at end.
Add 'X0Y10.E0' to bring table to operator for loading. Works with VMC 4020 only. Y value would differ
for other models. Not ideal way to handle but consistent with customers current method.
Add 'M0' before 'M2' at end of program so that table stops at modified E0 position.
Add StrtPos to drill cycle line.
Move Rapid StrtPos lines ahead of IF Multiparts? lines.
KC}

{8/19/92
Added "SetProgNum" to reset subroutine numbers to one "1" regardless of program number
KC}

{4/6/93
Added G8 at each tool. Remove BYE from program end.
KC}

{09/07/93
Removed 'DrillCP' and 'RapidC ZCP3C' from the 'IF Drilling?' commands.
Changed #6 format to add trailing 0's.
KC}

{4/15/94
Uncheck 'Allow R-Format Arcs' boolean. (Caused mixed output in programs input in metric).
KC}

{7/10/95
Minor correction to 'E' offset output @ mutiple parts.
KC}

{10/19/95
Initial: Fadal Format 1 [AC] M509.85
Created: Fadal Format 1 [SP] Mxxx.85
ForUser: Star Products
Control: Fadal
Machine: Fadal 3060 with 15000 RPM spindle
Develop: ComPost 4.21.33, Catalyst68K v2.30.14
Comment: New Processor per edited ouput.
Added G code initialization block after tool change.
the commands Plane AbsOrInc Rapid were moved to this line from the StrtPos line.
Deleted literal 'E1's
Combined StrtPos and Spindle lines.
Modified WFOStuff sub to output WFO per standard set up.
Added WFOStuff call to StrtPos line at beginning of operation.
Added G43 to MacSpec to be output with OfstOn.
Suppressed output of 1st WFO for MultipleParts Work Offsets OneToolAllParts.
Changed 'G0G49Z0' to Rapid OfstOff, same output.
Added AbsOrInc and 'H0' to OfstOff lines.
Added SpinOff to OfstOff at NewTool.
Deleted CoolOff, except for SameTool coolant control.
Changed Y10 to Y15 at end of program.
Deleted literal G8
Added CRCOffsetC
Added FromCP command.
Jim Radcliffe}

{1/18/96
Initial: Fadal Format 1 [SP] 886.85
Changed to : Fadal Format 1 [SP] 886.85.1
Added Tool Change to Tool #1 before program end, MPK}

{3/22/96, Tested ZOnlyRepAutoCycle, Changed version # to .89, MPK}

{1/29/99
Initial: Fadal Format 1 [SP] M886.89
Created: Fadal 1 [SP] PM886.17.5
For: Star Products
Made 4tha xis simple positioning post per CNCVIS1 PM611.17.5
MPK}

{2/9/99
Initial: Fadal 1 [SP] PM886.17.5
Created: Fadal 1 [SP] PM886.17.6
changed 4th axis output to M21 instaead of A angle.
MPK}

{2/9/99
Initial: Fadal 1 [SP] PM886.17.6
Created: Fadal 1 [SP] PM886.17.7
eliminated output of ) angle at program end,
changed literal Y15 to Y10 at program end
MPK}

{Prog Numeric Format Definitions ****}

#1 = '#.00'
#2 = '#####.###;0.'
#3 = '*#####.###;0.'
#4 = '####.####;0.'
#5 = '#######0'
#6 = '00'
#7 = '#'

FORMAT(FileFeet#,1)
FORMAT(FileMeters#,1)
FORMAT(UnitAngle#,2)
FORMAT(TrackCNO#,2)
FORMAT(TrackC#,2)
FORMAT(MoveC#,2)
FORMAT(Dwell#,2)
FORMAT(Recall#,4)
FORMAT(ADD#,4)
FORMAT(SpeedRPM#,4)
FORMAT(ToolDiameter#,4)
FORMAT(TrackXNO#,4)
FORMAT(TrackYNO#,4)
FORMAT(TrackZNO#,4)
FORMAT(Program#,5)
FORMAT(Operation#,5)
FORMAT(Tool#,5)
FORMAT(NewWFO#,5)
FORMAT(Parts#,5)
FORMAT(TRUNC#,6)
FORMAT(Program2#,6)
FORMAT(CallMasterNum#,6)
FORMAT(RapidF#,7)

{Added Subroutines ****}

spReset: {update to the correct StartPos}
TrackXNO# SPX#
TrackYNO# SPY#
RETURN

resetSP: {update to the correct StartPos}
IF Rotations? OR Repeats? OR AutoCycle?
IF AbsValue?
spReset
ELSE
SetAbs
spReset
SetInc
END
END
RETURN

saveEP: {save the correct EndPos}
IF PointFeat?
IF AutoCycle?
SetACSPCompF
Save# Num#('1') ADD# Recall# Num#('1') SPX# { xOpEP }
Save# Num#('2') ADD# Recall# Num#('2') SPY# { yOpEP }
SetACSPComp
ELSE
Save# Num#('1') SPX# { xOpEP }
Save# Num#('2') SPY# { yOpEP }
END
ELSE
Save# Num#('1') EPX# { xOpEP }
Save# Num#('2') EPY# { yOpEP }
END
RETURN

getEP: {save the correct EndPos}
IF Rotations? OR Repeats? OR AutoCycle?
IF AbsValue?
saveEP
ELSE
SetAbs
saveEP
SetInc
END
END
RETURN

setSRXYtoACEP:
TrackXNO# Recall# Num#('1') { xOpEP }
TrackYNO# Recall# Num#('2') { yOpEP }
RETURN

{Prog Subroutines ****}

doMoveC:
IF CMove?
TrackCNO# MoveC#
'M21' {call Haas Indexer}
END
RETURN

restoreScale:
IF Metric? {CAM file is in Metric, tools and tool path}
SetScale('.03937007874') { change to English, this is an English post}
END
RETURN

wfo:
'E' NewWFO#
RETURN

wfoStuff:
IF NewWFO?
IF MultipleParts? AND WorkFixtureOffsets?
EOL
'*** WARNING *** DO NOT USE NEWWFO() WITH MULTIPLE PARTS AND WORK FIXTURE OFFSETS' EOL
ELSE
wfo
END
ELSE
IF Flag?('2') { Need to output wfoStuff twice for MP-ESO-OTAP-ECP, once for all others }
IF NOT SameTool?
IF MultipleParts?
IF WorkFixtureOffsets?
WFO1
ELSE
wfo
END
ELSE
wfo
END
END
END
END
SetFlagF('2') { Do not output WFO second time wfoStuff is called for MP-WFO-OTAP-ECP }
RETURN

doSubComment:
IF UseComments? AND SubComment?
SeqLab '* SUB NUMBER: ' Program# EOL
END
RETURN

doOpComments:
IF UseComments?
SetScale('1') {restore scale for comments}
IF OperationIDComment?
SeqLab '* OPERATION ' Operation# ': ' OperationType$ EOL
END
IF OperationComment?
SeqLab '* ' OperationComment$ EOL
END
IF WorkGroupComment?
SeqLab '* ' WorkGroupComment$ EOL
END
IF ToolTypeComment?
SeqLab '* TOOL ' Tool# ': ' ToolDiameter# ' ' ToolType$ EOL
END
IF ToolComment?
SeqLab '* ' ToolComment$ EOL
END
restoreScale
END
RETURN

psInit:
NewWFOF
FourthCWF
FourthCCWF
RotateF
OptCyc1F
MasterOpF
CallMasterOpF
RETURN

psStuff:
IF FifthCW?
FORMAT(FifthDegree#,2)
SeqLab 'B' FifthDegree# EOL
FifthCWF
END
IF FifthCCW?
FORMAT(FifthDegree#,3)
SeqLab 'B' FifthDegree# EOL
FifthCCWF
END
RETURN

doPostScript:
psInit
EachPS
SeqLab PostScript EOL
psStuff
NextPS
RETURN

doEndOpPS:
psInit
EachEOPS
SeqLab EndOpPS EOL
psStuff
NextPS
RETURN

absValueC:
IF NOT AbsValue?
AbsValue
END
RETURN

incValueC:
IF AbsValue?
IncValue
END
RETURN

absOrIncC:
IF AbsoluteMoves?
absValueC
ELSE
incValueC
END
RETURN

setAngleUnder360: {sets status register and machine to current rotary position between -360 and 360 deg}
{Fanuc yes, Fadal no.}
RETURN

doStartPos:
StrtPos
IF AAxisAvail?
CalcSCAng doMoveC
ELSE
TrackCNO# Num#('0')
END
RETURN

entryMove:
IF FirstOperation? OR NewTool?
RapidF# { Forces FeedEnt/FeedRate }
ELSE
IF LAST Rotations? OR LAST Repeats?
RapidF# { Forces FeedEnt/FeedRate }
END
END
IF FeedEntry?
SeqLab Feed ZIn FeedEntC EOL
ELSE
SeqLab RapidC ZIn EOL
END
RETURN

startSub:
OpenSub
SeqLab SubIDF EOL
doSubComment
RETURN

subWarning:
IF NOT FeedConnect?
IF AnyZshift?
' ' EOL
SeqLab '* WARNING Z CLEARANCE WILL CHANGE WITH EACH CYCLE OF SUB REPEAT' EOL
' ' EOL
END
END
RETURN

StdSub:
SeqLab CallLab RepCycs EOL
StartSub
RETURN

finishSub1: {part 1}
IF NOT FeedConnect?
SeqLab RapidC ZCP3C EOL
END
RETURN

finishSubG92: {part 2}
SeqLab Preset ShiftR EOL
SeqLab EndSub EOL
CloseSub
SeqLab Preset UnshiftR EOL
RETURN

doWFOOps:
IF Flag?('5')
SetFlagF('5') { Suppress Redundant WFO for MP-WFO-OTAP-ECP }
ELSE
SeqLab Rapid doStartPos SetWFO EOL
END
SeqLab CallLab OnePart EOL
RETURN

openMP:
NewProg
IF WorkFixtureOffsets?
IF OneToolAllParts? AND ExitClearancePlane?
SetFlag('5') { Suppress Redundant WFO for MP-WFO-OTAP-ECP }
END
NewWFO
EachWFO {simple eachPart}
doWFOOps
IncWFO
NextWFO {simple NextPart}
startSub
ELSE
SeqLab CallLab Parts EOL
END
RETURN

closeMP:
IF WorkFixtureOffsets?
SeqLab EndSub EOL
CloseSub
ELSE
SeqLab Preset ShiftP EOL
SeqLab EndSub EOL
CloseSub
SeqLab Preset UnshiftP EOL
END
RETURN

doAbsOrInc:
IF Flag?('1') { Milling ZShiftOnly SepSubs/DrillSubs activated }
IF ZMove?
incValueC
ELSE
absOrIncC
END
END
RETURN

doDrillAbsOrInc:
IF Flag?('1') { DrillSubs activated }
IF SPZMove?
incValueC
ELSE
absOrIncC
END
END
RETURN

restoreAbsOrInc:
IF Flag?('1') { Milling ZShiftOnly SepSubs/DrillSubs activated }
SeqLab absOrIncC EOL
END
RETURN

FormatArc:
DoAbsOrInc
IF ArcCW?
CWArcC
ELSE
CCWArcC
END
MoveXYZC
IF ArcIJFormat?
ArcIJC
ELSE
ArcRC
END
RETURN

ckCRC:
IF LastFeat?
CRCOffC
ELSE
CRCOnC
END
RETURN

ckCRCNum:
IF NOT LastFeat?
CRCOffsetC
END
RETURN

tpPointFeat:
IF AutoCycle?
SeqLab MoveSXYC EOL
IF Repeats? AND ZshiftOnly?
SeqLab CallLabB TRUNC# SUB# Program# Num#('1') '01' EOL
ELSE
SeqLab CallLab '01' EOL
END
CalcACSRXY {calc tool position after sub call, CalcAutoCycleStatusRecordXY}
ELSE
IF FirstFeat?
SetFlagF('9') { For valid Drill Rotation Sub }
IF Rotations?
IF NOT LastFeat?
IF NOT MasterOp?
SetFlag('9') { valid Drill Rotation Sub }
NewProg
StartSub
END
END
END
ELSE
SeqLab doDrillAbsOrInc MoveSXYZC EOL
END
IF LastFeat?
IF Flag?('9') { valid Drill Rotation Sub }
restoreAbsOrInc
IF NOT MasterOp?
SeqLab EndSub EOL
CloseSub
END
END
END
END
RETURN

tpRapidFeat:
IF XMove? OR YMove? OR ZMove?
SeqLab doAbsOrInc ckCRC RapidC MoveXYZC ckCRCNum EOL
END
RETURN

tpLineFeat:
IF XMove? OR YMove? OR ZMove?
SeqLab doAbsOrInc ckCRC FeedC MoveXYZC FeedRateC ckCRCNum EOL
END
RETURN

tpArcFeat:
EACHQuadrant { Do not use NOT, FIRST, LAST or NEXT modifiers in this loop }
SeqLab doAbsOrInc ckCRC
IF ArcCW?
CWArcC
ELSE
CCWArcC
END
MoveXYZC
IF ArcIJFormat?
ArcIJC
ELSE
ArcRC
END
ArcFeedC ckCRCNum EOL
NEXTQuadrant
RETURN

toolPath:
ResetCRCNum
EACHFeat
IF FirstFeat?
resetSP
END
IF PointFeat?
tpPointFeat
ELSE
IF RapidFeat?
tpRapidFeat
ELSE
IF LineFeat?
tpLineFeat
ELSE
IF ArcFeat?
tpArcFeat
END
END
END
END
IF LastFeat?
getEP
END
NEXTFeat
SeqLab CRCOffC EOL
restoreAbsOrInc
RETURN

autoCycCutSub1: {part 1}
SaveSubStatus {save tool position}
SetPass1 {element cut moves}
startSub
SetSRXYtoSP
SeqLab incValueC EOL
RETURN

autoCycCutSub2: {part 2}
toolPath
SeqLab absOrIncC
IF Repeats? AND FeedConnect? AND ZshiftOnly?
ELSE
RapidC ZCP2
END
EOL
SeqLab EndSub EOL
CloseSub
SetSRSubXY {restore SR to 1st position value}
SetSRSubMove
RETURN

autoCycPat:
SetPass2 {position pattern}
toolPath {call after NewProg for correct sub calls}
SetPass1 {reset}
RETURN

milling:
IF AutoCycle?
NewProg
autoCycCutSub1
entryMove
autoCycCutSub2
autoCycPat
ELSE
entryMove
toolPath
END
RETURN

g92Sub:
subWarning
stdSub
SeqLab absOrIncC Connect doStartPos EOL
milling
finishSub1
finishSubG92
RETURN

doSepSubContour:
SetPass1
TrackZNO# SPZ#
startSub
RapidF#
IF AutoCycle?
NewProg
autoCycCutSub1 {build element sub}
TrackZNO# SPZ#
autoCycCutSub2
ELSE
toolPath
finishSub1
SeqLab EndSub EOL
CloseSub
END
SetPass1
SetStatusRapid
RapidF#
SetSRXYtoEP
TrackZNO# ClearancePlane2#
RETURN

doSepSubFeedConnect:
IF FeedConnect?
FeedEntC
END
RETURN

doSepSubSPMove:
SetStatusOff
IF SPXMove? OR SPYMove?
IF AutoCycle?
incValueC
END
SeqLab Connect StrtPosC doSepSubFeedConnect EOL
absOrIncC
ELSE
Connect
END
SetStatusOn
RETURN

doSepSubZMoves:
IF FeedConnect?
SeqLab FeedC ZInPlusInc FeedEnt EOL
ELSE
IF FeedEntry?
IF NOT FirstCycle?
SeqLab RapidC ZCP2PlusInc EOL
END
SeqLab Feed ZInPlusInc FeedEnt EOL
ELSE
IF FirstCycle? AND AutoCycle?
Rapid
END
SeqLab RapidC ZInPlusInc EOL
END
END
SeqLab CallLab '01' EOL
IF NOT FeedConnect? AND NOT AbsValue?
TrackZNO# ZCP2PlusInc#
SeqLab ZCP2C EOL
IF NOT AutoCycle?
TrackZNO# ClearancePlane3#
END
END
RETURN

setSepSubZ:
SetAbs
TrackZNO# ADD# SPZ# MUL# RepsLess1# RepeatZ#
SetInc
RETURN

doSepSubExit:
IF NOT AbsValue?
setSepSubZ
END
IF AutoCycle?
SeqLab Rapid ZCP2 EOL
ELSE
Rapid { Will be output at millingOp ZCP3 }
END
RETURN

resetSepSubSR:
SetPass1
SetStatusRapid
RapidF#
TrackXNO# Recall# Num#('1') { xOpEP }
TrackYNO# Recall# Num#('2') { yOpEP }
RETURN

zonlyRepAutoCycle:
doSepSubContour
EachCycle
IF NOT FirstCycle?
doSepSubSPMove
END
doSepSubZMoves
NextCycle
IF FeedConnect?
doSepSubExit
END
SeqLab EndSub EOL
CloseSub
{Element shift, not pattern}
autoCycPat {write pattern moves and main calls}
resetSepSubSR
TrackZNO# ClearancePlane2#
RETURN

zonlyRep:
doSepSubContour
EachCycle
IF NOT FirstCycle?
doSepSubSPMove
END
doSepSubZMoves
NextCycle
resetSepSubSR
IF FeedConnect?
doSepSubExit
ELSE
TrackZNO# ClearancePlane3#
END
RETURN

millingOp:
SeqLab ZCP2C EOL
IF Repeats?
NewProg
IF ZshiftOnly?
IF AutoCycle? {incremental Autocycle sub can have Z moves}
zonlyRepAutoCycle
ELSE {Z shift only, NOT Auto Cycle}
SetFlag('1') { Milling ZShiftOnly SepSubs activated }
zonlyRep
SetFlagF('1') { Milling ZShiftOnly SepSubs deactivated }
END {end Auto Cycle IF}
ELSE {not Z only}
g92Sub
END {end Z only IF}
ELSE {no repeat OPs}
milling
END
IF AutoCycle?
SeqLab ZCP3C EOL
setSRXYtoACEP
ELSE
SeqLab RapidC ZCP3C EOL
END
RETURN

skipToLastFeat:
EachFeat
IF LastFeat?
TrackXNO# SPX#
TrackYNO# SPY#
END
NextFeat
RETURN

setDrillEndOpZ:
IF RetractToCP1?
TrackZNO# ClearancePlane1#
ELSE
TrackZNO# ClearancePlane2#
END
RETURN

drillingOp:
IF NOT Rotations?
IF PosApproach? { Positive Approach On }
SeqLab 'M46' EOL
END
END
SeqLab DrillCP EOL
GetCycle
SeqLab
IF RigidTap?
'G84.1'
ELSE
Cycle
END
FromCP doStartPos ZDepth RLevel Dwell Peck Retract
IF Tap?
'F' SpeedRPM# FadalTapQ
ELSE
FeedEnt
END
EOL
IF CallMasterOp?
SeqLab CallLabB CallMasterNum# '01' EOL
skipToLastFeat
ELSE
TrackZNO# SPZ#
IF MasterOp?
SetFlag('1') { DrillSubs activated }
NewMasterProg
SeqLab CallLab '01' EOL
startSub
toolPath
SeqLab EndSub EOL
CloseSub
SetFlagF('1') { DrillSubs deactivated }
ELSE
toolPath
END
END
setDrillEndOpZ
IF NOT Rotations?
IF PosApproach? { Positive Approach Off }
SeqLab 'M47' EOL
END
SeqLab DrillOff Rapid ZCP3 EOL
END
RETURN

checkPass: {use the correct StrtPos}
IF AutoCycle?
SetPass2
ELSE
SetPass1
END
RETURN

rotateStartPosC:
TrackXNO# Recall# Num#('1') { xOpEP }
MoveSXC
TrackYNO# Recall# Num#('2') { yOpEP }
MoveSYC
CalcSCAng doMoveC
RETURN

rotaryReps: {use the correct EndPos}
EachRotation
IF Milling?
IF FirstRotation?
NewProg
SaveProgNum2
StartSub
millingOp
SeqLab EndSub EOL
CloseSub
checkPass
ELSE
SeqLab rotateStartPosC EOL
END
SeqLab CallLabB Program2# '01' EOL
ELSE
IF Drilling?
IF FirstRotation?
IF PosApproach? { Positive Approach On }
SeqLab 'M46' EOL
END
drillingOp
checkPass
ELSE
IF RetractToCP1? AND Equal? ClearancePlane1# ClearancePlane3#
SeqLab rotateStartPosC EOL
ELSE
IF NOT RetractToCP1? AND Equal? ClearancePlane2# ClearancePlane3#
SeqLab rotateStartPosC EOL
ELSE { Need to cancel Drill Cycle between Rotations }
SeqLab DrillOff Rapid ZCP3 EOL
SeqLab rotateStartPosC EOL
SeqLab DrillCP EOL
SeqLab
IF RigidTap?
'G84.1'
ELSE
Cycle
END
FromCP rotateStartPosC ZDepth RLevel Dwell Peck Retract
IF Tap?
'F' SpeedRPM# FadalTapQ
ELSE
FeedEnt
END
EOL
END
END
END
IF CallMasterOp?
IF NOT FirstRotation?
SeqLab CallLabB CallMasterNum# '01' EOL
END
ELSE
IF MasterOp?
IF NOT FirstRotation?
SeqLab CallLab '01' EOL
END
ELSE
IF Flag?('9') { valid Drill Rotation Sub }
SeqLab CallLab '01' EOL
END
END
END
IF LastRotation?
IF PosApproach? { Positive Approach Off }
SeqLab 'M47' EOL
END
SeqLab DrillOff Rapid ZCP3 EOL
END
END
END
NextRotation
TrackXNO# Recall# Num#('1') { xOpEP }
TrackYNO# Recall# Num#('2') { yOpEP }
TrackZNO# ClearancePlane3#
RETURN

opGuts:
IF Rotations?
rotaryReps
ELSE
IF Milling?
millingOp
ELSE
IF Drilling?
drillingOp
END
END
END
RETURN

progStart:
InitProg
ReverseXZArcs
InitWFONum
SetFlood
SetMaxRPM('15000')
IF Metric?
SetMaxFeed('12700')
ELSE
SetMaxFeed('500')
END
Save# Num#('1') Num#('0') { Status Register Variable for X Axis }
Save# Num#('2') Num#('0') { Status Register Variable for Y Axis }
Save# Num#('10') Num#('0') { FORMATting for Number of Subroutine Loops }
SetFlagF('1') { Milling ZShiftOnly SepSubs/DrillSubs deactivated }
SetFlagF('2') { Need to output wfoStuff twice for MP-ESO-OTAP-ECP, once for all others }
SetFlagF('5') { Suppress Redundant WFO for MP-WFO-OTAP-ECP }
SetFlagF('9') { For valid Drill Rotation Sub }
IF PSComment? AND UseComments?
'Utility Data:' EOL
' At Op Start: All literals and commands will appear at the beginning of the operation.' EOL
' At Op End: All literals and commands will appear at the end of the operation.' EOL
' Literals: put between single or double quotes.' EOL
' Separate commands and literals with at least one space.' EOL
' A CR ( RETURN key ) will start a new line.' EOL
' Commands: may be capital and/or lower case letters. Separate commands with a space.' EOL
' NewWFO(56), NWFO(56) -' EOL
' The Work Fixture Offset # you specify will be used for all following operations.' EOL
' Do not use with the ncPost multiple part option.' EOL
' 5thAxisCW(30), 5ACW(30) -' EOL
' generates a + B move of the value you specify' EOL
' 5thAxisCCW(22.5), 5ACCW(22.5) -' EOL
' generates a - B move of the value you specify' EOL
END
RETURN

initOp:
EOR EOL
SeqLab ProgID1
IF UseComments? AND ProgramNameComment?
'*' ProgramName$
END
EOL
SetProgNum('0')
IF UseComments?
IF ProgramComment?
SeqLab '* ' ProgramComment$ EOL
END
IF FormatNameComment?
SeqLab '* FORMAT: ' FormatName$ EOL
END
IF TimeComment?
SeqLab '* ' Date$ ' AT ' Time$ EOL
END
IF MovesComment?
SeqLab '* OUTPUT IN ' MoveType$ ' INCHES' EOL
END
IF PartsComment?
SeqLab '* PARTS PROGRAMMED: ' Parts# EOL
END
IF StartToolComment?
SeqLab '* FIRST TOOL NOT IN SPINDLE' EOL
END
END
OpenSub
restoreScale
RETURN

firstOp1:
IF ToolChangeAtHome?
SetHome
END
SeqLab OpToolID ToolChng EOL
SeqLab Rapid Plane CRCOff DrillOff AbsOrInc 'G98' EOL
doOpComments
doPostScript
RETURN

firstOp2:
checkPass
IF Drilling? AND Tap? AND OptCyc1?
SeqLab wfoStuff 'G84.2' doStartPos EOL
ELSE
SeqLab wfoStuff doStartPos Speed SpinOn EOL
END
RETURN

firstOp3:
SeqLab OfstOn CoolOn EOL
RETURN

newToolOp1:
SeqLab Rapid absOrIncC OfstOff 'H0' SpinOff EOL
setAngleUnder360
RETURN

newToolOp2:
doEndOpPS
IF ToolChangeAtHome?
SeqLab absOrIncC Rapid Home
END
IF LAST ProgStop?
SeqLab 'M0' EOL
ELSE
SeqLab ProgStop EOL
END
RETURN

newToolOp3: {Start new Operation}
SeqLab OpToolID ToolChng EOL
SeqLab Rapid Plane CRCOff DrillOff AbsOrInc 'G98' EOL
doOpComments
doPostScript
RETURN

newToolOp4:
CheckPass
IF Drilling? AND Tap? AND OptCyc1?
SeqLab wfoStuff 'G84.2' doStartPos EOL
ELSE
SeqLab wfoStuff doStartPos Speed SpinOn EOL
END
RETURN

newToolOp5:
SeqLab OfstOn CoolOn EOL
RETURN

sameToolOp1:
doEndOpPS
IF LAST ProgStop?
SeqLab Rapid absOrIncC OfstOff 'H0' SpinOff 'M0' EOL
SeqLab Rapid Plane CRCOff DrillOff AbsOrInc 'G98' EOL
ELSE
IF CoolOff? AND LAST NOT CoolOff?
SeqLab CoolOff EOL
END
END
setAngleUnder360
RETURN

sameToolOp2: {Start new Operation}
doOpComments
doPostScript
checkPass
RETURN

sameToolOp3: {Start new Operation}
IF LAST ProgStop?
IF Drilling? AND Tap? AND OptCyc1?
SeqLab WFOStuff 'G84.2' doStartPos EOL
ELSE
SeqLab WFOStuff doStartPos SpeedC SpinOn EOL
END
SeqLab OfstOn CoolOn EOL
ELSE
IF NewToolOffset?
SeqLab Rapid AbsOrInc OfstOff 'H0' EOL
SeqLab SpeedC EOL
SeqLab WFOStuff PlaneC AbsOrInc Rapid doStartPos EOL
SeqLab OfstOn EOL
ELSE
SeqLab SpeedC EOL
SeqLab WFOStuff PlaneC AbsOrInc Rapid doStartPos EOL
END
IF LAST CoolOff? AND NOT CoolOff?
SeqLab CoolOn EOL
END
END
RETURN

end1:
SeqLab Rapid AbsOrInc OfstOff 'H0' SpinOff EOL
TrackCNO# Num#('0')
RETURN

end2:
doEndOpPS
IF FIRST ToolChangeAtHome?
SeqLab absOrIncC Rapid FirstHome EOL
END
IF ProgStop?
SeqLab 'M0' EOL
END
RETURN

end3:
SeqLab WFOOff 'X0Y10.' EOL
SeqLab 'T1' ToolChng EOL
SeqLab 'M0' EOL
SeqLab EOP EOL
EndSubs
Post
EOR EOL
Close
Retag
IF UseComments?
SetScale('1') {restore scale for comments}
Reopen
IF FileBytesComment?
'* FILE LENGTH: ' FileBytes# ' CHARACTERS' EOL
END
IF FileFeetComment?
'* FILE LENGTH: ' FileFeet# ' FEET' EOL
END
IF FileMetersComment?
'* FILE LENGTH: ' FileMeters# ' METERS' EOL
END
Close
END
RETURN

mpAllTools1P: {Multiple Parts, All Tools 1 Part}
EachOp {Start of post processing}
IF EquallySpacedOffsets?
SetFlag('2') { Need to output wfoStuff twice for MP-ESO-OTAP-ECP, once for all others }
END
IF FirstOperation?
openMP
firstOp1
firstOp2
firstOp3
ELSE
IF NewTool?
newToolOp1
newToolOp2 {to tool change, CS problem}
newToolOp3
newToolOp4
newToolOp5
ELSE {implied SameTool?}
sameToolOp1
sameToolOp2
sameToolOp3
END
END {common point for all operations}
opGuts
NextOp {loops back to EachOP until last Operation}
end1
end2
closeMP
end3
RETURN

mp1ToollAllPfu: {Multiple Parts, 1 Tool all Parts, full up}
EachOp {Start of post processing}
IF EquallySpacedOffsets?
SetFlag('2') { Need to output wfoStuff twice for MP-ESO-OTAP-ECP, once for all others }
END
IF FirstOperation?
firstOp1
openMP
firstOp2
firstOp3
ELSE
IF NewTool?
newToolOp1
closeMP
newToolOp2 {to tool change, CS problem}
newToolOp3
openMP
newToolOp4
newToolOp5
ELSE {implied SameTool?}
sameToolOp1
sameToolOp2
sameToolOp3
END
END {common point for all operations}
opGuts
NextOp {loops back to EachOP until last Operation}
end1
closeMP
end2
end3
RETURN

mp1ToollAllPXcp: {Multiple Parts, 1 Tool all Parts, exit Clearance plane}
EachOp {Start of post processing}
SetFlag('2') { Need to output wfoStuff twice for MP-ESO-OTAP-ECP, once for all others }
IF FirstOperation?
firstOp1
firstOp2
firstOp3
openMP
firstOp2 {need StrtPos in Sub}
ELSE
IF NewTool?
closeMP
newToolOp1
newToolOp2 {to tool change, CS problem}
newToolOp3
newToolOp4
newToolOp5
openMP
newToolOp4 {need StrtPos in Sub}
ELSE {implied SameTool?}
sameToolOp1
sameToolOp2
sameToolOp3
END
END {common point for all operations}
opGuts
NextOp {loops back to EachOP until last Operation}
closeMP
end1
end2
end3
RETURN

noMPs: {no multiple parts}
EachOp {Start of post processing}
SetFlag('2') { Need to output wfoStuff twice for MP-ESO-OTAP-ECP, once for all others }
IF FirstOperation?
firstOp1
firstOp2
firstOp3
ELSE
IF NewTool?
newToolOp1
newToolOp2
newToolOp3
newToolOp4
newToolOp5
ELSE {implied SameTool?}
sameToolOp1
sameToolOp2
sameToolOp3
END
END {common point for all operations}
opGuts
NextOp {loops back to EachOP until last Operation}
end1
end2
end3
RETURN

{Start of executable Prog, Top Level ****}

progStart {setup and initializations}
initOp

IF MultipleParts?
IF AllToolsOnePart?
mpAllTools1P
ELSE {implied OneToolAllParts?}
IF FullUp?
mp1ToollAllPfu
ELSE {implied ExitClearancePlane?}
mp1ToollAllPXcp
END
END
ELSE
noMPs
END


Wyszukiwarka

Podobne podstrony:
Fadal [EI] RM605 17 5
Fadal [CM] PM992 17 6
Fadal [CM] PM992 17 6
Fadal Format 2 [E] PM585 17 6
Yasnac M5G Mat [SP] PM884 17 5
Fadal [INS] PM452 17 6
Fadal Format 1 [RPB] PMX95 17 6
Fadal Format 1 [MD] PMV25 17 6
Fadal Format 2 [CM] PM235 17 5
Fadal Format 1 [Coh] PM212 17 5
Fadal Format 2 [AC] RM807 17 6
Fadal Format 2 [AM] PMW48 17 6
Fadal Format 1 [CSE] PM917 17 6
Fadal Format 2 [LC] PMT88 17 5
Fadal Format 1 [FS] RMQ11 17 7
Fadal Format 1 [Coh] PM997 17 5
Fadal Format 1 [SM] PMT74 17 6

więcej podobnych podstron