Hand Wrought Earrings We have a simple and elequent way for you to make a new pair of earrings this month. Materials " 2 8 pieces or 20g Gold Craft Wire " 6 4mm Gold Colored Jump Rings " 1pr Gold Colored Earwire " 2 Fairy Charms Tools " Round Nose Pliers " Chain Nose Pliers " Wire Cutters Step One Bend wire to a right angle 1.5 inches from the end of one side of each piece of wire. Step Two Using your round nose pliers place a loop 2 inches from the opposite end of each piece of wire. Step Three Bring the right angle up to meet the loop. The loop should located inside the circle/oval you are forming. If your crafting doesn't look like this photo you most likely just need to twist the right angle 180 degrees so the right angle is facing the opposite direction. Step Four Gently twist the right angle around the wire directly above the loop twice. Cut off the excess wire from this twist. Step Five Create a wire wrapped loop above the loop. Step Six Attach a 4mm jumpring to the loop in the center of the finding you just crafted. Attach a 4mm jumpring to the charm. Attach both of those jumprings together with a third 4mm jumpring. Step Seven Repeat steps 1 through 6 for the second earring and then attach your earwires. www.beadstudio.com 266 E Main St, Ashland OR 97520 (541) 488-3037