General Safety Information
Installation of the HG sprockets
11T - 23T
WARNING For each sprocket, the surface that has
the group mark should face outward
" Check that the wheels are fastened securely before riding the bicycle. If the wheels are
and be positioned so that the wide
loose in any way, they may come off the bicycle and serious injury may result.
parts of the gear projections on each
" If using the CS-6600 (14-25T, 15-25T, 16-27T) in combination with a front chainwheel,
sprocket and the A part (where the
use a double chainwheel. If you use it in combination with a triple chainwheel, gear
groove width is wide) of the freewheel
shifting performance will drop, and the bicycle may fall over and serious injury may result.
body are aligned.
" Obtain and read the service instructions carefully prior to installing the parts. Loose,
Spacer Sprocket spacers Lock ring spacer Lock ring
worn, or damaged parts may cause injury to the rider.
We strongly recommend only using genuine Shimano replacement parts. 12T - 23T, 12T - 25T, 12T - 27T
Wide part
" Read these Technical Service Instructions carefully, and keep them in a safe place for A
later reference.
The groove is
Note
wide at one
" Do not use the CS-6600 in any combination other than with the CN-7801 / CN-6600. place only.
Other chains cannot be used as the sizes do not match.
" An 11T and a 12T lock ring are available for use with the CS-6600. Use whichever lock
Spacer Sprocket spacers Lock ring spacer Lock ring
ring matches the sprocket configuration.
" If the wheel becomes stiff and difficult to turn, you should lubricate it with grease.
13T - 25T, 14T - 25T, 15T - 25T, 16T - 27T
" Do not apply any lubricant to the inside of the hub, otherwise the grease will come out.
" You should periodically wash the sprockets in a neutral detergent and then lubricate them
again. In addition, cleaning the chain with neutral detergent and lubricating it can be a
effective way of extending the useful life of the sprockets and the chain.
" If the chain keeps coming off the sprockets during use, replace the sprockets and the
chain.
" Parts are not guaranteed against natural wear or deterioration resulting from normal use.
" For maximum performance we highly recommend Shimano lubricants and maintenance
Lock ring spacer Lock ring
products.
" For installation of the HG sprockets, use the special tool (TL-LR15)
to tighten the lock ring.
" To replace the HG sprockets, use the special tool (TL-LR15) and
Technical Service Instructions SI-3C90C
TL-SR20 to remove the lock ring. Tool
Disassembly
(TL-SR20)
Install the TL-SR20 to the largest sprocket.
Tightening torque: TL-LR15 Lock ring
Freehub
FH-6600
30 - 50 N·m {261 - 434 in. lbs.}
Specifications Replacement of the freewheel body
After removing the hub axle, remove the freewheel body fixing
Freehub
Freewheel Freewheel body
bolt (inside the freewheel body), and then replace the freewheel body fixing bolt
Model No. Gears No. of spoke holes Overlock nut dimensions
body.
Disassembly
FH-6600 9 / 10 24 / 28 / 32 / 36 130 mm
Rubber seal
Install the rubber seal as the last item
after replacing the freewheel body,
Cassette sprocket Sprockets marked by are secured.
and make sure that it does not get
Assembly
Model No. CS-6600
clamped by the waterproof cap.
Freewheel body
washer
11T - 23T 11T, 12T, 13T, 14T, 15T, 16T, 17T, 19T, 21T, 23T
Note:
10 mm Allen key (TL-WR37)
12T - 23T 12T, 13T, 14T, 15T, 16T, 17T, 18T, 19T, 21T, 23T
Do not attempt to disassemble the freewheel body, because it
Tightening torque:
12T - 25T 12T, 13T, 14T, 15T, 16T, 17T, 19T, 21T, 23T, 25T may result in a malfunction.
35 - 50 N·m {305 - 434 in. lbs.}
12T - 27T 12T, 13T, 14T, 15T, 16T, 17T, 19T, 21T, 24T, 27T
Sprocket tooth
configuration These service instructions are printed on recycled paper.
13T - 25T 13T, 14T, 15T, 16T, 17T, 18T, 19T, 21T, 23T, 25T
14T - 25T 14T, 15T, 16T, 17T, 18T, 19T, 20T, 21T, 23T, 25T
15T - 25T 15T, 16T, 17T, 18T, 19T, 20T, 21T, 22T, 23T, 25T
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003 Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222 3-77 Oimatsu-cho, Sakai, Osaka 590-8577, Japan
16T - 27T 16T, 17T, 18T, 19T, 20T, 21T, 22T, 23T, 25T, 27T
Please note: specifications are subject to change for improvement without notice. (English) © Mar. 2005 by Shimano Inc. XBC SZK Printed in Japan
1
c
-
a
4
T
Wyszukiwarka
Podobne podstrony:
SI 1DG0C En v1 m56577569830612168SI 3TA0A 001 ENG v1 m56577569830693997barcelona 6 directory v1 m56577569830521452northwestern tuscany 5 v1 m56577569830519630eastern tuscany 5 v1 m56577569830519628central tuscany 5 v1 m56577569830519627lang rouss 1 montpellier area v1 m56577569830523116mexican spanish food v1 m56577569830491278dubai 5 desert safaris v1 m56577569830512167lang rouss 1 haut languedoc v1 m56577569830523114gambia senegal history music v1 m56577569830500872barcelona 6 excursions v1 m56577569830521455dubai 5 neighbourhoods v1 m56577569830512171barcelona 6 history v1 m56577569830521456mexican spanish tools chapter v1 m56577569830496009gambia senegal language v1 m56577569830500885dubai 5 entertainment v1 m56577569830512170mexican spanish social v1 m56577569830491277lang rouss 1 toulouse area v1 m56577569830523119więcej podobnych podstron