6007 Dress Minna Instructions


PATTERN
CUTTING OUT
1 Front piece 1x
FOLD (    ) means: here is the center of a pattern piece
2 back piece 2x but never a cut edge or a seam. The piece should be cut
double, with the fold line forming the centre line.
3 Bias strap for the armhole 2x Pattern pieces that are outlined with a broken line in the
cutting diagrams are to be placed face down on the fabric.
4 Placket for the body 2x The cutting diagrams on the pattern sheet show how the
pattern pieces should be placed on the fabric.
Paper cut for ANSI A (German DIN A4) prints:
The patterns are printed out on 24 sheets with a thin frame. Cut out the pattern pieces according to your size:
Wait, until all sheets are printed out. Arrange the sheets so
that they fit together (see extra page with the overview of the The cutting diagrams show the placement of the pattern
prints). Cut off the single sheets on the upper and right edge on the fabric
along the thin frame lines. Begin with the left lower sheet and For a single layer of fabric, the pattern pieces are pinned to
then glue the parts in the frame lines together precisely. the right side. For double layers of fabric, the right sides are
Select your size according to the Burda-dimension table: facing and the pattern pieces are pinned to the left side. The
Dresses, blouses, jackets and coats according to the bust pattern pieces that are shown in the cutting diagram,
size, trousers and skirts according to the hip width. Change extending over the fold of the fabric, should be cut last from
the pattern if necessary, to fit your measurements if they a single layer of fabric.
deviate from the Burda-dimension table.
SEAM AND HEMLINE ALLOWANCES are included on an
LENGTHENING OR SHORTENING THE PATTERN average:
PIECES 1 1/2  (4 cm) for the hemline and 5/8 (1.5 cm) for all edges
Our pattern is calculated for a height of 5 6 (168 cm). If you and stitches.
are taller or shorter, you may adjust the pattern to fit your
size. Choose your size at the lines marked "lengthen or
shorten here". Thus the proper fit is preserved. Lace edging
Make sure that you adjust all pieces of one pattern by the Cut the packet (part 4) twice out of the lace edging. Press
same amount at the same lines and smooth out the lace edging according to the pattern
How to lengthen and shorten pattern pieces: piece. Transfer the lines and signs onto the left fabric side
Cut the pattern pieces along the marked lines. using burda copying paper. Instructions you will find in the
To lengthen, slide the two halves of the pattern piece as far packaging.
apart as necessary.
To shorten, overlap the two halves of the pattern piece as
far as necessary. Even out the side edges.
Sewing
While sewing the right fabric sides are facing.
Transfer all lines of the pattern onto the the right fabric side
using basting stitches.
DRESS
Back center seam
1 Position the back pieces on top of each other, the right
sides facing, baste the center seam and stitch. Neaten
allowances and press them apart.
Double stitching the neckline
Neaten the front and back neckline
2 Double stitch along the front and back neckline, each time
from the top to the center, using large stitches. Tigthen the
understhreads but don t knot yet.
Lateral pleats
3 Fold the pleats of the front and back piece in the direction
of the arrows, pin and stitch along the allowances.
Right lateral seam
4 Position the front piece onto the back piece the right sides
are facing, stitch the right lateral seam (seam 1). Neaten
allowances and press apart.
Bias strap for the armpit
Fold the bias straps lengthwise, left side inside. Press.
5 Cut one bias strap for the left front armhole and the back
armhole into two pieces. Trim the allowances of the
armholes to ½ (1 cm).
6 Baste the bias straps onto the armhole, the right sides
facing, the open edges are laying on the allowance. Stitch
the bias straps ½ (1 cm) from the edge. Trim the
allowances, cut in.
7 Fold and baste the bias straps, press. Stitch the edge of
the armholes ź (0.7 cm), thereby stitching the bias strap.
Left lateral seam / zipper (seam covered)
Use an invisible zipper. That zipper is stitched (on) invisibly
from the right. The zipper should be 1 (2 cm) longer than the
slit. It will be applied before the seam under the slit is
stitched. To apply the zipper you need a special foot. Neaten
the allowances.
8 Open the zipper and pin it onto the allowance of a slit
edge, the right side of the zipper is facing the allowance. The
little teeth have to lay exactly on the marked slit edges. Stitch
the zipper, using a special zipper foot, close along the zipper
teeth. Stitch the other strap of the zipper in the same way
onto the other slit edge (8a).
At the top fold the strap end inside. At both slit edges stitch
from the top to the slit sign (arrow). Since the zipper teeth
have the tendency to roll in, the special zipper foot keeps
them flat. Close the zipper.
Left lateral seam
9 Position the front piece onto the back piece the right sides
facing. Stitch the lateral seam from the bottom to the slit sign.
Pull the zipper slightly . Secure the seam ends. Press the
allowances apart.
Placket of the lace edging
10 Pin the right placket onto the left placket at the front edge,
the centers meet. Pin the plackets at the back center in the
same way. Trim the overlapping edges, fold inside narrowly
and stitch onto the lace edging (10a).
Along the neckline edges the underthreads of the double
stitched seam has to be tigthened slightly to the length of the
outer lace edging. Start at the center and tighten to the cross
lines. Knot threads. Distribute the width equally.
11 Pin the lace edging onto the neckline, thereby beginning
and ending at the front and respectively back center. Cross
line 2 meets the front armhole edges, cross line 3 meets the
bacl armhole edges. Stitch the lace edging narrowly. Try the
dress on. If necessary, adjust the lace edging along the
shoulder, and stitch a little dart (11a).
Hemline
12 Neaten hemline, fold inwards and baste, press. Sew the
hemline easily by hand.


Wyszukiwarka

Podobne podstrony:
coffee date dress multisize instructions
jonny dress instructions id 200 Nieznany
Shari dress Instructions
celestina dress instructions
bra dress instructions
Mushroom Dress Instructions
African Dress Instructions
6035 dress Instructions
The AMC Dress by AnaJan Instructions
Minna dress pattern
instrukcja prezentacja2

więcej podobnych podstron