SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
PETROL
VOLVO S 80 04 DIESEL
MAKE MOD. YEAR
X
ALARM/SIREN Position the compact alarms and the sirens on the wheelhouse, passenger s side.
POSITION
The modular systems and the modules should be positioned under the dashboard, driver s
CENTRAL UNIT POSITION
side.
POWER SUPPLY +30: connect to the 4 mm2 RED/WHITE wire located in the wiring harness coming out of the
multiway connector, at the entrance of the fuse box.
- 31: connect to one of the original ground cable located behind the left lateral bulkhead,
driver s side.
IGNITION WIRE +15/54: connect to the BLUE/RED wire located in the wiring harness coming out of the
central placed under the driver s side dashboard.
DIRECTION INDICATORS Connect to the GREEN wire (one of the two), at the position marked SH1 and to the
GREEN/WHITE wire (one of the two), at the position marked SH2 , behind the central
placed under the driver s side dashboard.
ELECTRIC WINDOWS Positive control signal
Front window, drivers side:
cut the RED/BLACK wire on the serial push button, inside the driver s side door.
Front window, passengers side:
cut the RED/BLACK wire, on the serial push button, inside the driver s side door.
Rear window, drivers side:
cut the GREEN/BROWN wire, at the position M11 coming out of the windows central unit
located under the dashboard, driver s side.
Rear window, passengers side:
cut the GREEN/BROWN wire, at the position M12 coming out of the windows central unit
located under the dashboard, driver s side.
CENTRAL DOORS LOCKING Negative control signal
Connect to the BLUE/WHITE wire (unlock) and to the VIOLET/WHITE wire (lock) in the
wiring harness coming out of the green connector of the push-button panel, directly inside
the driver s side door.
IMMOBILISATION POINT Gasoil pump
Cut the GREY wire in the wiring harness coming out of the green connector coming out of
the original locking device central located on the left of the ignition key.
STARTER +50: cut the YELLOW/WHITE wire located in the wiring harness coming out of the ignition
key.
BONNET SWITCH Install an additional switch on the front headlamp support plate, driver s side.
DOORS SWITCH Connect to the WHITE wire located in the wiring harness coming out of the lamp placed
under the driver s side dashboard.
BOOT SWITCH Connect to the WHITE wire located in the wiring harness coming out of the lamp placed in
the boot.
vos8004gbd.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
Wyszukiwarka
Podobne podstrony:
Schematy Podłączeń Alarmow VOLVO (6)Schematy Podłączeń Alarmow VOLVO (7)Schematy Podłączeń Alarmow VOLVO (11)Schematy Podłączeń Alarmow VOLVO (18)Schematy Podłączeń Alarmow VOLVO (1)Schematy Podłączeń Alarmow VOLVO (10)Schematy Podłączeń Alarmow VOLVO (4)Schematy Podłączeń Alarmow VOLVO (2)Schematy Podłączeń Alarmow VOLVO (17)Schematy Podłączeń Alarmow VOLVO (15)Schematy Podłączeń Alarmow VOLVO (12)Schematy Podłączeń Alarmow VOLVO (13)Schematy Podłączeń Alarmow VOLVO (19)Schematy Podłączeń Alarmow VOLVO (16)Schematy Podłączeń Alarmow VOLVO (9)Schematy Podłączeń Alarmow VOLVO (20)Schematy Podłączeń Alarmow VOLVO (8)Schematy Podłączeń Alarmow VOLVO (14)więcej podobnych podstron