G94 End Taper Face Turning Cycle

{\rtf1\ansi\deff0{\fonttbl{\f0\fnil MS Sans Serif;}}
{\colortbl ;\red255\green0\blue0;\red0\green0\blue0;}
\viewkind4\uc1\pard\qc\cf1\lang2057\b\f0\fs24 G94 End_Taper Face Turning Cycle
\par
\par \pard\cf2\b0\fs20 The G94 command performs a one pass face cutting cycle, where the cut is applied in the Z axis.
\par Also, by using the word R __ within a G94 command, tapers can be generated.
\par If a repartition of the move is required, only the values that change need to be entered into the next block.
\par
\par A G94 command for a face cutting cycle is written in the following format:
\par G94 X (U) __ Z (W) __ F __ ;
\par where,
\par F __ is the feedrate.\cf1\b\fs24
\par
\par
\par }

Wyszukiwarka

Podobne podstrony:
G94 End Taper Face Turning Cycle
G74 End Face Peck Drilling Cycle
G90 canned cycle taper cutting
G90 canned cycle taper cutting
function mcal event set end
2002 09 Creating Virtual Worlds with Pov Ray and the Right Front End
LOTOS END
Bee Gees End Of My Song
25 The Nine Worlds Their Shaping and End
G86 Grooving Cycle
Hotel at The end of The Road
function printer end doc
G88 Chip Cutting Drill Cycle with Redraw
function mcal event set end
At Witt s End

więcej podobnych podstron