{Change Comments ****************}

{9/23/88
Copied & modified: Okuma OSP 3000-LC20 L049.51
For: Shultz
Machine: Okuma
Control: OSP 5000 LB15
Machine only has one Turret, no need to call for or see Tool# for 2nd Turret.
Deleted ToolOver20? stuff, added conventional OpToolID stuff.
Changed FORMATs to 4-place non-decimal trailing Zero's.
Added spaces between Codes.
JR}

{9/29/88
Modified: Okuma OSP 3000-LB20 L067.51
Worked on Canned Cycles.
BG,JR}

{5/9/89
Copied & modified: Okuma OSP 3000-LB20 L067.56
For: Petes Workshop
Machine: Okuma
Control: OSP 5000 LB15
New 1st line of program with End of Record code.
Changed FORMATs to decimal.
Modified Canned Cycles.
JR}

{9/27/89, updated & added PostScript to Okuma OSP 5000 LB15 L103.55, JR}
{3/15/90, Updated: Okuma OSP 5000 LB15 L103.61 to .69.3 format, JR}
{7/24/90, Added InitProg globally to posts with this remark, DWB}
{9/5/91, Updated Okuma OSP 5000 LB15 L103.70 to .82 format, JR}


{5/14/93
Modified: Okuma OSP 5000 LB15 L103.82
For: Gibbs & Associates
Updated to Version 4.1 per Fanuc 10T MS [-] L001.82.1 Format.
DWB}

{5/14/93
Modified: Okuma OSP 5000 LB15 L103.82.1
For: Gibbs & Associates
Created Metric version.
DWB}

{6/2/93
Modified: Okuma OSP 5000 LB15 L103.82.1m
For: Gibbs & Associates/Cigraph PTY
Changes made per E-Mail from Maurizio at Cigraph PTY.
Change CutDepth to XCutDepth#/ZCutDepth# at CannedCycle RoughContour.
DWB}

{10/6/94
Updated: Okuma OSP 5000 LB15 L103.82.2m
For: Gibbs & Associates/Cigraph PTY/MD Research
Versions: ncCad 4.33/ncCAM 4.33/ncPost 4.33.03/Compost 4.21.22
Updated to Version 4.1 per Fanuc 10T MS [-] L001.82.1a Format.
Added SetAbs at setup and initializations.
Added StandardXZArcs at setup and initializations.
Changed MoveType$ to literal 'ABSOLUTE' at FirstOperation.
Added AND NOT Threading? condition at AutoFinish.
Moved Post command in front of EOR EOL at end of Prog.
DWB}

{10/6/94
Copied: Okuma OSP 5000 LB15 L103.82.3m
Created: Okuma 5000 LB15 [MD] L310.82.3m
For: Gibbs & Associates/Cigraph PTY
Versions: ncCad 4.33/ncCAM 4.33/ncPost 4.33.03/Compost 4.21.22
Changes made per E-Mail from Maurizio at Cigraph PTY.
Added Rapid Home at FirstOperation.
Added ProgStop command to CheckOffset sub.
Maurizio reported that cut depth in rough turning operation is being output as a radius value and
should be output as a diameter value.
Added MUL# to FORMAT#2.
Changed ' D' XCutDepth# to ' D' MUL# XCutDepth# NumSc#('2') at CannedCycle RoughContour.
Added LOfstOff '00' to NewHome block at NewTool.
Added OpToolID '00' to FirstHome block at end of Prog.
Added condition to output SpinOff when Spindle direction changes at NewTool.
Added SpinOff at end of Prog.
Changed ' M32' to ' M33' at CannedCycle Threading.
Changed ' M75' to ' M73' at CannedCycle Threading.
Moved DoOpComments from SameTool to CheckOffset sub.
Maurizio requested that G74 FI-RO Canned Drilling Cycle contain a dummy Peck value by outputting the
incremental distance from CycleStartZ to ZDepth.
Added condition to only output Peck Retract for Peck Cycles at CannedCycle Drilling.
Added dummy Peck formula for Non-Peck Cycles at CannedCycle Drilling.
Added SUB# to FORMAT#2.
NOTE: Problem exists with ZDepth# which does not get scaled correctly for INCH>Metric and
Metric>INCH conversions.
For Metric ncCam files:
Added ' D' SUB# ZDepth# CycleStartZ#.
For INCH ncCam files:
Temporarily re-FORMATting MUL# to FORMAT#5
Added ' D' SUB# MUL# ZDepth# NumSc#('2.54') CycleStartZ#.
Added TrackZNO# CycleStartZ# for Non-Peck Cycles at CannedCycle Drilling.
DWB}

{12/9/95
Copied: Okuma 5000 LB15 L310.82.3m
Created: ?
For: Fortier
Changes made per Dan Pilone.
Changed to English format.
Updated for Catalyst v2.20 per Fanuc 10T MS [-] L001.85 format;
(Added cutter compensation capability and support of Auto Clearance).
Joe Cusimano}

{11/17/97
Initial: Okuma OSP 5020-L [JF] L409.85
Created: Okuma OSP 7000-L LB25 Lxxx.85
ForUser: Lincoln Machine
Control: Okuma OSP 7000-L
Machine: Okuma LB25-2
Develop: ComPost2 1.1b3, Virtual 4.21.14
Comment: New processor per fax from Gary Bruestle
Moved Preset line at beginning of program to before Rapid Home line.
Moved SpinOff to same line as EOP at end of program.
Changed G33 to G34 for ThreadFeat.
Jim Radcliffe}

{12/2/97
Initial: Okuma OSP 7000L [LM] L671.85
Created: Okuma OSP 7000L [LM] L671.85.1
Develop: ComPost2 1.1b3, Virtual 4.21.21
Comment: Modified format of ThrdLead per fax from Gary Bruestle
Jim Radcliffe}

{02/23/98,
Initial: Okuma OSP 7000L [LM] L671.85.1
Created: Okuma OSP 7000L [JDHW] L707.85m
For: John Deere Harvester Works
Changed to Metric post.
Changed from I's & J's to "L" format arcs. Customer wanted "L"s instead of "R"s.
CDH}

{03/14/98,
Initial: Okuma OSP 7000L [JDHW] L707.85m
Created: Okuma OSP 7000L [JDHW] L707.85m.1
For: John Deere Harvester Works

In Form:
Arcs no longer stop on quadrants.
CDH}

{Prog Numeric Format Definitions ********************}

#1 = '#.00'
#2 = '+####.###;0'
#3 = '#######0'
#4 = '###.##;0'
#5 = '####.###;0'
#6 = '###0'
#7 = '#'

FORMAT(FileFeet#,1)
FORMAT(FileMeters#,1)
FORMAT(SUB#,2)
FORMAT(MUL#,2)
FORMAT(XCutDepth#,2)
FORMAT(ZCutDepth#,2)
FORMAT(Program#,3) {.72}
FORMAT(Operation#,3) {.72}
FORMAT(Tool#,3) {.72}
FORMAT(Dwell#,4) {.72}
FORMAT(Peck#,5)
FORMAT(CalcEPRPM#,6)
FORMAT(RapidF#,7)

{Prog Subroutines ******************}

RestoreScale:
IF NOT Metric? {CAM file is in English, tools and tool path}
SetScale('25.4') { change to Metric, this is an Metric post}
END
RETURN

DoOpComments:
IF UseComments?
SetScale('1')
IF OperationIDComment?
'( OPERATION ' Operation# ': ' OperationType$ ' )' EOL
END
IF OperationComment?
'( ' OperationComment$ ' )' EOL
END
IF WorkGroupComment?
'( ' WorkGroupComment$ ' )' EOL
END
IF ToolTypeComment?
'( TOOL ' Tool# ': ' ToolSize$ ' ' ToolType$ ' )' EOL
END
IF ToolComment?
'( ' ToolComment$ ' )' EOL
END
RestoreScale
END
RETURN

PSInit: {reset flags from last Op, .70}
RETURN

PSStuff:
RETURN

DoPostScript:
PSInit
EachPS
SeqLabC PostScript EOL {literals}
PSStuff {commands}
NextPS
RETURN

DoEndOpPS:
PSInit
EachEOPS
SeqLabC EndOpPS EOL {literals}
PSStuff {commands}
NextPS
RETURN

StockOnNoCan:
IF NOT CannedCycle?
StockOn {need stock for SP positioning, if not a canned cycle}
END
RETURN

FeedNoCan:
IF NOT CannedCycle?
FeedC
END
RETURN

FeedRateNoCan:
IF NOT CannedCycle?
FeedRateC
END
RETURN

ApproachSP:
IF ApproachFace?
SeqLabC StockOnNoCan XSPC EOL
SeqLabC StockOff ZOpCPC EOL
StockOnNoCan
IF NotEqual? CycleStartZ# ZOpCP#
SeqLabC FeedNoCan ZSPC FeedRateNoCan EOL
END
ELSE { ODApproach/IDApproach }
SeqLabC StockOnNoCan ZSPC EOL
SeqLabC StockOff XOpCDC EOL
StockOnNoCan
IF NotEqual? CycleStartX# XOpCD#
SeqLabC FeedNoCan XSPC FeedRateNoCan EOL
END
END
RETURN

AppMove:
StockOff ThisOpEntryZCP
RETURN

Approach: { NOT FOR TAILSTOCK, .82 }
RapidF# { RapidF# Forces FeedRate }
IF ApproachOD?
SeqLabC ThisOpEntryXCP AppMove EOL
ELSE
IF ApproachID?
SeqLabC XOpCD AppMove EOL
ELSE {ApproachFace}
SeqLabC StockOnNoCan XSP AppMove EOL
END
END
ApproachSP
RETURN

CheckOffset:
DoEndOpPS
IF LAST ProgStop?
SeqLabC ' M0' EOL
ELSE
SeqLabC ProgStop EOL
IF CoolOff? AND LAST NOT CoolOff?
SeqLabC CoolOff EOL
END
END
DoOpComments
IF NewToolOffset?
SeqLabC LOfstOff '00' EOL
SeqLabC OpToolID LatheOffset EOL
END
IF ConstantSurfaceFeed?
IF LAST ConstantSurfaceFeed?
IF NotEqual? MaxRPM# LAST MaxRPM#
SeqLabC Preset MaxRPM EOL
END
ELSE
SeqLabC Preset MaxRPM EOL
SeqLabC CSSOn ' G96' Speed
END
ELSE
IF LAST ConstantSurfaceFeed?
SeqLabC CSSOff ' G97' Speed
END
END
IF LAST ProgStop?
SeqLabC SpeedC SpinOn EOL
SeqLabC CoolOn EOL
ELSE
SeqLabC SpeedC EOL
IF NOT CoolOff? AND LAST CoolOff?
SeqLabC CoolOn EOL
END
END
DoPostScript
RETURN

FormatArc:
IF ArcCW?
CWArcC
ELSE
CCWArcC
END
MoveXC MoveZC
IF ArcIJFormat?
ArcIJC
ELSE
ArcRC
END
RETURN

CkCRC: { 4.2 }
IF XMove? OR ZMove? { Approach Length Feature and Multiple Pockets }
IF NOT LastFeat?
CRCOnC
END
END
IF LastFeat? AND EmptyLine? { Exit Length Feature }
CRCOffC
END
RETURN

ToolPath:
EACHFeat
GetToolTip
IF LastFeat?
IF Drilling?
IF Tap?
SeqLabC SpinOff EOL
SeqLabC ' G4 P2000' EOL
SeqLabC Speed InverseSpinOn EOL
ELSE
IF Dwell?
SeqLabC ' G4 P' Dwell# EOL
END
END
END
END
IF PointFeat?
SeqLabC MoveSXYC EOL
ELSE
IF RapidFeat?
SeqLabC
IF LAST ThreadFeat?
Rapid
ELSE
RapidC
END
MoveXC MoveZC EOL
ELSE
IF LineFeat?
SeqLabC CkCRC FeedC MoveXC MoveZC FeedRateC EOL
ELSE
IF ArcFeat?
EACHQuadrant { Do not use NOT, LAST, FIRST or NEXT modifiers in this loop }
SeqLabC FormatArc FeedRateC EOL
NEXTQuadrant
ELSE
IF ThreadFeat?
SeqLabC ' G34' MoveXC MoveZC ThrdLead EOL
END
END
END
END
END
NEXTFeat
RETURN

CheckRapid:
CRCOffC Rapid
RETURN

{Start of executable Prog ***************************}

{setup and initializations}
InitProg
SetAbs
PosSideLathe
StandardXZArcs
SetMaxRPM('10000')
IF Metric?
SetMaxFeed('12700')
ELSE
SetMaxFeed('500')
END
IF PSComment? AND UseComments?
'PostScript:' EOL
' Literals: put between single or double quotes.' EOL
' Separate commands and literals with at least one space.' EOL
' A CR ( RETURN key ) will start a new line.' EOL
' Commands: must be all capital letters when typed in.' EOL
' ENDOP -' EOL
' all literals and commands before an ENDOP command' EOL
' will appear at the beginning of the operation. All ' EOL
' literals and commands after an ENDOP command will appear' EOL
' at the end of the operation. ' EOL
END
EachOp {Start of post processing *********************}
GetLCycle
IF FirstOperation?
'$' ProgramName$ '.MIN' EOR EOL
IF UseComments?
IF ProgramNameComment?
'( PROGRAM: ' ProgramName$ ' )' EOL
END
IF ProgramComment?
'( ' ProgramComment$ ' )' EOL
END
IF FormatNameComment?
'( FORMAT: ' FormatName$ ' )' EOL
END
IF TimeComment?
'( ' Date$ ' AT ' Time$ ' )' EOL
END
IF MovesComment?
'( OUTPUT IN ABSOLUTE MILLIMETERS )' EOL
END
END
RestoreScale
OpenSub
StockOff {.71.2}
SetHome
DoOpComments
DoPostScript
Plane
IF ConstantSurfaceFeed?
SeqLab Preset MaxRPM EOL
SeqLabC Rapid Home EOL
SeqLabC Rapid CSSOff ' G97' CalcRPM1
ELSE
SeqLab Rapid Home EOL
SeqLabC Rapid CSSOff ' G97' Speed
END
OpToolID LatheOffset SpinOn CoolOn ' M42' EOL
Approach
ELSE
IF NewTool?

{Finish off last Operation}

StockOff {.62}
CheckRapid
IF LAST ApproachOD?
SeqLabC LAST OpExitXCPC EOL
ELSE
IF LAST ApproachID?
SeqLabC LAST XOpECDC EOL
END
END
SeqLabC LAST OpExitZCPC EOL
DoEndOpPS
IF LAST ConstantSurfaceFeed?
SeqLabC CSSOff ' G97' CalcRPM2 EOL
END
SeqLabC NewHome LOfstOff '00'
IF LAST ProgStop?
' M0' EOL
ELSE
ProgStop EOL
END
IF CWSpindle? AND LAST NOT CWSpindle?
SeqLabC SpinOff EOL
ELSE
IF NOT CWSpindle? AND LAST CWSpindle?
SeqLabC SpinOff EOL
END
END

{Start new Operation}

DoOpComments
DoPostScript
IF ConstantSurfaceFeed?
SeqLab Preset MaxRPM EOL
SeqLabC Rapid CSSOff ' G97' CalcRPM1
ELSE
SeqLab Rapid CSSOff ' G97' Speed
END
OpToolID LatheOffset SpinOn CoolOn ' M42' EOL
Approach
ELSE
IF SameTool? {.62}

{Start new Operation}

StockOff
IF LAST StraightConnect?
CheckOffset
CheckRapid
SeqLabC StockOnNoCan XSPC ZSPC EOL
ELSE
CheckRapid
IF ApproachOD?
IF LAST ApproachOD?
SeqLabC LAST XOpECDC EOL
ELSE {around}
IF LAST ApproachID?
SeqLabC LAST XOpECDC EOL
END
SeqLabC LAST OpExitZCPC EOL
SeqLabC LAST OpExitXCPC EOL
END
ELSE
IF ApproachID?
IF LAST ApproachID?
SeqLabC LAST XOpECDC EOL
ELSE
IF LAST ApproachOD? {around}
SeqLabC LAST OpExitXCPC EOL
END
SeqLabC LAST OpExitZCPC EOL
SeqLabC XOpCDC EOL
END
ELSE {ApproachFace}
IF LAST ApproachFace?
SeqLabC LAST ZOpECPC EOL
ELSE
IF LAST ApproachOD? {around}
SeqLabC LAST OpExitXCPC EOL
ELSE {LAST ApproachID}
SeqLabC LAST XOpECDC EOL
END
SeqLabC LAST OpExitZCPC EOL
END
END
END
CheckOffset
ApproachSP
END
END
END
END {common point for all operations}
IF ConstantSurfaceFeed? AND NOT SameTool?
SeqLabC CSSOn ' G96' Speed EOL
END
IF CannedCycle?
StockOff
IF Roughing?
IF NOT RoughSimple?
TagInc
SetPass2
IF RoughContour?
SeqLabC ' G85 Nł' Tag#
IF ApproachFace?
' D' ZCutDepth#
ELSE
' D' MUL# XCutDepth# NumSc#('2')
END
FeedRate XStkLeft ZStkLeft EOL
'>' Tag# EOL
IF ApproachFace?
SeqLab ' G82' EOL
ELSE
SeqLab ' G81' EOL
END
ELSE
IF RoughPatternShift?
SeqLabC ' G86 Nł' Tag#
IF ApproachFace?
' D' ZCutDepth#
ELSE
' D' XCutDepth#
END
FeedRate XStkLeft ZStkLeft EOL
'>' Tag# EOL
IF ApproachFace?
SeqLab ' G82' EOL
ELSE
SeqLab ' G81' EOL
END
END
END
SeqLabC StepMove StrtPos EOL
ToolPath
SeqLabC ' G80' EOL
IF AutoFinish?
SeqLabC ' G87 Nł' Tag# EOL
END
SetPass1
TrackXNO# CycleStartX#
TrackZNO# CycleStartZ#
END
ELSE
IF Threading?

{ G72 Face Threads modification would require changes to XTapAtZ command with W Address }

SeqLabC ' G71' XatFinZ FinZ XTapAtZ
IF SingleEdgeCut?
ToolAngle
ELSE
' B0'
END
CutDepth ThrdHeight ThrdLead ' M33'
IF ConstantVolumeCut?
' M73'
ELSE
' M74'
END
IF Chamfer?
' M23'
ELSE
' M22'
END
EOL
IF AutoFinish?
SeqLabC ' G33' XatFinZ FinZ XTapAtZ ThrdLead EOL
SeqLabC Rapid XCSP EOL
SeqLabC ZCSP EOL
END
ELSE
IF Drilling?
SeqLabC
IF Tap? AND NOT CWSpindle?
' G78'
ELSE
LCycle
END
XCSP ZDepth
IF Peck?
Peck Retract
IF PeckFullRetract?
' L' Peck#
END
ELSE
IF NOT Tap?
IF NOT Metric?
' D' SUB# ZDepth# CycleStartZ#
ELSE
FORMAT(MUL#,5)
' D' SUB# MUL# ZDepth# Num#('.03937007874') CycleStartZ#
FORMAT(MUL#,2)
END
TrackZNO# CycleStartZ#
END
END
FeedRate Dwell EOL
END
END
END
ELSE
StockOn
SetPass1
ToolPath
IF AutoFinish?
IF NOT Drilling? AND NOT Grooving? AND NOT RoughSimple? AND NOT Threading?
StockOff
IF Turning?
SetPass1
RapidC
IF ApproachFace?
SeqLabC ZOpECPC EOL
ELSE
SeqLabC XOpECDC EOL
END
ELSE
SetPass2
SeqLabC RapidC XSPC ZSPC EOL
END
SeqLabC StockOff StrtPosC EOL
ToolPath
END
END
IF Drilling? AND Tap?
SeqLabC SpinOff EOL
SeqLabC ' G4 P2000' EOL
SeqLabC Speed SpinOn EOL
END
END
NextOp {loops back to EachOP until last Operation}

{End of program **********************}

{finish last operation}
StockOff
CRCOffC Rapid
IF ApproachOD?
SeqLabC OpExitXCPC EOL
ELSE
IF ApproachID?
SeqLabC XOpECDC EOL
END
END
SeqLabC OpExitZCPC EOL
DoEndOpPS
SeqLabC CoolOff EOL
IF ConstantSurfaceFeed?
SeqLabC CSSOff ' G97 S' CalcEPRPM# EOL
END
SeqLabC SpinOff EOL
SeqLabC FirstHome OpToolID '00'
IF ProgStop?
' M0'
ELSE
ProgStop
END
EOL
SeqLabC SpinOff EOP EOL
Post
EOR EOL
Close
Retag
IF UseComments?
SetScale('1') {restore scale for comments}
Reopen
IF FileBytesComment?
'( FILE LENGTH: ' FileBytes# ' CHARACTERS )' EOL
END
IF FileFeetComment?
'( FILE LENGTH: ' FileFeet# ' FEET )' EOL
END
IF FileMetersComment?
'( FILE LENGTH: ' FileMeters# ' METERS )' EOL
END
Close
END


Wyszukiwarka

Podobne podstrony:
Okuma OSP 5020L [PB] L604 85 1
Okuma OSP 5000 [NC] L606 85 1
Okuma OSP 5020 [TPM] L572 85
Okuma OSP 5020M MC4V M860 89 1m
Okuma OSP 5020L [CP] L787 85
Okuma OSP 3000 LC20 L049 85
Okuma OSP 5020L [WMC] L676 85 3
Okuma OSP 5500 Cadet L331 85
Okuma OSP 5020L [GCS] L540 85
Okuma OSP 5020L [MP] L626 85
Okuma OSP 5020 [MM] L806 85
Okuma OSP 5020 [IP] L523 85 1

więcej podobnych podstron