SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
MAKE
RENAULT
MOD.
KANGOO
YEAR
03 âÄ…Å‚ PETROL
DIESEL
X
ALARM/SIREN
Position the compact alarms and the sirens in the engine compartment, near the battery.
POSITION
Use the original core hitch located in the windshield wiper.
CENTRAL UNIT POSITION
Position the modular systems and the modules under the dashboard, driver’s side.
POWER SUPPLY
+30: connect to the RED wire in the 15 way P202 white connector, on the central behind the instrument board on the left.
- 31: connect to a ground terminal behind the driver’s side bulkhead.
IGNITION WIRE
+15/54: connect to the YELLOW wire, in the 15 way P202 white connector, behind the instrument board on the left.
DIRECTION INDICATORS
Connect to the ORANGE wire at the position nr.3 and to the ORANGE wire at the position nr.4, in the 15 way P202 white connector, on the central behind the instrument board, on the left.
ELECTRIC WINDOWS
Positive control signal
Front window, driver’s side: cut the WHITE wire, at the position nr.1, in the green connector on the serial push button inside the driver’s side door.
Front window, passenger’s side: cut the BROWN wire in the wiring harness coming out of the driver’s side door.
CENTRAL DOORS LOCKING
Negative control
Connect to the BROWN wire at the position nr.14 (lock) and to the ORANGE wire at the position nr.13 (unlock), in the 40 way black connector on the central behind the instrument board on the left.
IMMOBILISATION POINT
Inertial switch
Cut the WHITE wire, in the 2 way black connector on the inertial switch fixed to the driver’s side shock absorber, near the positive pole of the battery.
STARTER
+50: Cut the WHITE wire in the 4 way white connector behind the instrument board, on the left.
BONNET SWITCH
Install an additional switch on the front headlamp support plate, driver’s side.
DOORS AND BOOT
Connect to the VIOLET wire, at the position nr.27, in the 40 way P201 white connector, in SWITCHES
the central behind the instrument board, on the left.
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed rekan03gbd.doc
as per the instructions given on the product installation manual.