Ch 04 summary


CHAPTER 4 BONDING
(IB TOPICS 4 AND 14) SUMMARY
A chemical bond is the interaction between atoms within a molecule, between molecules or
between ions of opposite charges. Bond formation is an exothermic process; it gives out
energy and leads to a more energetically stable state.
Bonding in liquids and solids
1. Covalent bonding results from electron sharing between non-metals or a non-metal and
a metal of higher electronegativity. The electron pair is attracted by both nuclei leading
to a bond that is directional in nature.
(i) van der Waals Forces: For a non-polar molecule, only weak, temporary, instantaneous
dipole-dipole interaction called van der Waals forces exist between molecules. These
molecules are low melting point solids and low boiling point liquids and gases. Larger the
molecule, stronger the van der Waals forces, higher its boiling and melting points.
(ii) Dipole-dipole Interaction: In a polar molecule, besides weak van der Waals forces,
the molecules experience stronger permanent dipole-dipole interaction.
(iii)Hydrogen Bonding: Elements of high electronegativity (F, O, N), bonded to a (tiny)
hydrogen atom give rise to a special case of dipole-dipole interaction called H-bonding.
This is important in determining solubility, melting and boiling points, and stability of
crystal structures. Hydrogen bonding also plays an important role in biological systems.
Hydrogen bonded molecules experience stronger hydrogen bonding in addition to van der
Waals forces and dipole-dipole interaction.
Strength of bonding: van der Waals < dipole-dipole < H-bond << covalent bond H" ionic
bond. However, van der Waals forces can become extensive depending on the size of the
molecules, e.g., in polymers and long chain hydrocarbon molecules.
2. Ionic bonding occurs as a result of electron transfer from active metals of Groups 1, 2,
3 to active non-metals of Groups 6, 7, leading to electrostatic attraction between ions of
opposite charges. Ionic crystals are regular repeating arrays of positive and negative
ions, packed so that each positive ion is surrounded by negative ions and vice versa in a
3 dimensional lattice structure. Ionic crystals have high melting and boiling points, are
water soluble (water solubility varies considerably) and conduct electricity when molten
or in aqueous solution, but not in the solid state, as ions are not free to move about in a
solid ionic crystal.
3. Metals are good conductors of electricity and heat, ductile and malleable. Metals have
low ionization energies and vacant valence orbitals. Metals consist of regular, repeating
arrangements of metal ions (cations) in which the bonding electrons are mobile or
delocalized and can move rapidly through the metal, since an electron is much smaller
than the spaces between the cations. This explains high conductivity of elements.
Electrons can acquire large amounts of kinetic energy and rapidly transfer it to cooler
parts of the metal: this explains thermal conductivity. The movement of cations between
layers can take place with no change in metallic bonding. This explains ductility and
malleability.
4. Allotropes of carbon: Diamond, Graphite and C60 Fullerene form covalent bonds and
network solids. In diamond, each carbon is covalently bonded to four other carbon atoms
in a three dimensional tetrahedral arrangement. Diamond is very hard, stable with a very
high melting point and does not conduct electricity as all its valence electrons are involved
in covalent bonding (sp3 hybridized). Graphite has a layered structure; each layer has
carbon atoms covalently bonded to three other carbon atoms (sp2 hybridized) in a
hexagonal arrangement but with only weak van der Waals forces between layers.
Graphite is easy to break, and soft with lubricating qualities. Graphite is a good conductor
due to mobility of electrons in pi orbitals that are delocalized. C60 fullerene contains 60
carbon atoms (20 hexagons and 12 pentagons). It is a highly symmetrical, closed-
carbon-caged molecule. Within each molecule, each carbon atom is covalently bonded
to three other carbon atoms (sp2 hybridized). C60 molecules contain two bond lengths 
© IBID Press 2007 1
CHAPTER 4 BONDING
(IB TOPICS 4 AND 14) SUMMARY
the hexagons can be considered "double bonds" and are shorter; the longer bonds in the
pentagonal rings suggest that electron delocalization is poor.
" Lewis Electron-Dot Structures: Structures showing covalent bonds by using symbols of
element(s) involved, and indicating all the valence electrons by using dots, crosses, a
combination of dots and crosses or by using a line to represent a pair of electrons.
" Valence Shell Electron Pair Repulsion (VSEPR) Theory: Electron pairs in the valence shell
of the central atom are arranged as far apart as possible due to mutual repulsion. This minimizes
the forces of repulsion between the electron pairs. The species therefore has minimum energy
and maximum stability.
SHAPES WITH ONLY BONDED ELECTRON PAIRS ON THE CENTRAL ATOM:
#of Bonded e Pairs Structure Angle Examples
2 (and no lone e- pairs) Linear 180o BeCl2, CO2, C2H2
3 (and no lone e- pairs) Trigonal planar 120 o BCl3, CO32 , NO3
4 (and no lone e- pairs) Regular Tetrahedral 109.5o CH4, BF4 , NH4+
5 (and no lone e- pairs) Trigonal bipyramidal 90o, 120 o, 180 o PCl5
6 (and no lone e- pairs) Octahedral or square 90 o and 180 o SF6
bipyramidal
SHAPES WITH 3 ELECTRON PAIRS (BONDED + LONE PAIRS) ON CENTRAL ATOM
Number of Number of
Structure Angle Examples
bonded e pairs lone e pairs
3 0 Trigonal planar 120o BCl3, CO32 , NO3
Bent, V-Shaped, less than 120o
2 1 O3, SO2, NO2
or angular (or H"120o)
SHAPES WITH 4 ELECTRON PAIRS (BONDED + LONE PAIRS) ON CENTRAL ATOM
Number of Number of
Structure Angle Examples
bonded e pairs lone e pairs
Regular Tetrahedral
Regular CH4, BF4 ,
4 0
Tetrahedral 109½o NH4+
Trigonal " H"107o or less than NH3, PCl3,
3 1
pyramidal 109o SO32
Bent, V-shaped " H"105o or less than
2 2 H2O
or Angular 109o
© IBID Press 2007 2
CHAPTER 4 BONDING
(IB TOPICS 4 AND 14) SUMMARY
SHAPES WITH 5 ELECTRON PAIRS (BONDED + LONE PAIRS) ON CENTRAL ATOM
Number of Number of
Structure Angle Examples
bonded e pairs lone e pairs
Trigonal 90o, 120 o, 180 o PCl5
5 0
bipyramidal
Unsymmetrical SF4
4 1 H" 90o, 120 o, 180 o
tetrahedral
3 2 T-shaped 90o, 180 o ClF3
2 3 Linear 180 o I3
SHAPES WITH 6 ELECTRON PAIRS (BONDED + LONE PAIRS) ON CENTRAL ATOM
Number of Number of
Structure Angle Examples
bonded e pairs lone e pairs
Octahedral or 90 o and 180 o SF6
6 0
square bipyramidal
5 1 Square pyramidal H"90 o and 180 o BrF5
4 2 Square planar 90 o XeF4
" Note that it is important to specify the angle as both O3 and H2O are bent molecules, but
with different angles around the central atoms.
" A lone e pair is spread out over a larger volume than a shared e pair, causing a distortion
from regular geometry, and causing the angle to be slightly reduced.
" A Resonance structure is one of two or more Lewis structures for a species that cannot be
described adequately by a single structure. Resonance structures have the same sigma bonds
but differ in the arrangement of the pi bonds. The actual bonding is a mixture of the various
possible arrangements, and will have a lower energy than any of the individual forms. The
phenomenon is called delocalization because the valence electrons provided by individual
atoms are no longer held in the vicinity of that atom, but are mobile and shared by a number
of atoms. It is this spreading out of the electrons that gives the structure its lower potential
energy than it would have if double and single bonds were arranged in such a way that
orbital overlap could not take place. Thus, delocalization stabilizes a structure.
" Bonds have electron distribution with axial symmetry around the axis joining the two
nuclei (from combination of two s orbitals or an s and a p or hybridized orbitals); Ä„ bonds
result from the sideways overlap of parallel p orbitals with electron distribution above and
below the nuclei.
" Hybridization involves mixing of atomic orbitals to give new hybrid orbitals of equivalent
energy, i.e., it is the redistribution of energy in different orbitals (in the valence shell) of
an atom.
© IBID Press 2007 3
CHAPTER 4 BONDING
(IB TOPICS 4 AND 14) SUMMARY
Type of Examples Bonds Shape Angle
Hybridization
4 Ã bonds
CH4 Tetrahedral
sp3 (combination = 109.5°
3 Ã; 1 lone e- pair
of: one s and
NH3 Trigonal
<109.5°
2 Ã; 2 lone e- pairs
three p orbtals)
pyramidal
H2O (H"107°)
Bent/angular/ V
<109.5°
(H"105°)
Each C has 3 Ã; 1 Ä„
C2H4 Planar
sp2(combination 120°
C=C has 1 Ã; 1 Ä„
of: one s and two
B has 3 Ã bonds
p orbtals)
BCl3 Planar
120°
Each C has 3 Ã; 1 Ä„
C6H6 Planar
120°
sp(combination C2H2 Each C has 2 Ã; 2 Ä„ Linear
180°
of: one s and one
Ca"C has 1 Ã; 2 Ä„
p orbtal)
Be has 2 Ã bonds
BeCl2 Linear
180°
(N.B. Shading indicates Topic 14 (AHL) material.)
© IBID Press 2007 4


Wyszukiwarka

Podobne podstrony:
Ch 10 summary
Ch 06 summary
Ch 08 summary
Ch 12 summary
Ch 14 summary
Ch 05 summary
Ch 15 summary
Ch 09 summary
Ch 07 summary
ch 04
Ch 02 summary
Ch 17 summary
Ch 11 summary
Ch 18 summary
Ethics ch 04
Ch 01 summary
Ch 16 summary

więcej podobnych podstron