Build a Garden Bench Strona 1 z 5
Find this article online:
http://www.lowes.com/lowes/lkn?action=howTo&p=Build/GardenBench
Build a Garden Bench
Skill Level: Intermediate
Enjoy the beauty of your garden from
the comfort of a bench you build
yourself. There's just something about a
natural cedar garden bench that seems
to say "come on and sit a spell." This
bench is great for lounging on a relaxing
afternoon, reading or adding entries to
your garden journal. Lowe's is happy to
provide this information as a service to
you.
Beauty and comfort all in one place.
Article Content
Bench Building Alternatives
Tools & Materials
Make the Side Frames
Install the Seat Rails and Center Seat Supports
Install the Seat Slats
Install the Backrest
Attach the Armrests
Bench Building Alternatives
This bench can also make a great addition to your indoor décor. For different looks, simply
substitute oak, poplar or pine for the cedar boards in the materials list.
An oak bench with a clear top coat of varnish or water-based polyurethane brings to mind a
simpler time and the popularity of mission or arts and crafts styles.
A properly conditioned poplar bench takes stain evenly and the neutral grain pattern of the
poplar allows you to mimic many wood species.
A pine bench is an excellent choice for painting to match any color scheme.
Tools & Materials
Click a text link below to shop for that item.
Click the information icon for a product buying guide.
Tools Materials
Circular saw or table saw 1"x4"x8' boards
Router 12 pcs
Combination square Wood glue
Drill/driver with bits Finish nails
Jig saw 1 1/4" galvanized screws
Level Sandpaper
http://www.lowes.com/lowes/lkn?action=howTo&p=Build/GardenBench&print=true 2008-12-27
Build a Garden Bench Strona 2 z 5
Palm sander
Clamps
Tape measure
Dust mask
Goggles
Hearing protection
See the Cut List.
Make the Side Frames
1. Face glue the seat assembly supports to the inside faces of one front side frame upright and
one back side frame upright. Use 3d finish nails to hold the boards together while the glue
dries.
2. Measure and mark 2 1/2" in from each end of one of
the upright connectors and draw a seat contour on it
that connects the marks. (The contour's exact shape
is a personal preference.) Use a jigsaw or band saw
to cut along the contour line. Use the connector as a
pattern to mark the remaining upright connector
and the center seat supports. Mark the front end of
each piece for future reference. Face-clamp the
pieces together and gang sand them so their
The upright connector with seat slats
contours match.
already installed.
3. Lay the uprights on your workbench with the inside faces up. Lay an upright connector across
a set of front and back uprights so that its bottom edge abuts the top ends of each seat
assembly support. Leave 3/4" between the upright connector's ends and the outside edge of
each upright. Remember to orient the connector so that the end marked front is toward the
front upright.
4. Square the uprights and connector. Predrill holes through the connector and secure it to the
uprights with glue and screws.
5. Use the remaining uprights and connector to assemble the second side frame as a mirror
image of the first.
Install the Seat Rails and Center Seat Supports
1. Predrill countersink holes near the ends of the seat rails so you can screw through the rails
into the ends of the upright connectors.
2. Secure the rails to the side frames with glue and
screws. Check the assembly for square and adjust
as needed.
3. Measure in 15 1/4" from the ends of each rail and
mark the inside face of the rail.
4. Screw and glue each of the four, 6" long 3/4"x3/4"
support blocks flush with the bottom of the rails
centered on the 15 1/4" marks.
5. Cut a 3/4"x3/4" notch in the bottom of each end of
each center seat support. Position the center seat
supports centered on the 15 1/4" marks. Bore
countersink holes in the front and back seat rails
centered on the 15 1/4" marks and secure the
center seat supports with glue and screws.
Secure the rails to the side frames with
glue and screws.
http://www.lowes.com/lowes/lkn?action=howTo&p=Build/GardenBench&print=true 2008-12-27
Build a Garden Bench Strona 3 z 5
Install the Seat Slats
1. Use a router and a 1/4" round over bit to round over the 1 1/2" seat slats and the 3 1/2" seat
slats.
2. Position the front 3 1/2" slat on the bench so it overhangs the front seat rail by 3/8". Secure
the slat with finish nails and glue.
3. Lay a piece of 1x4 on edge so its back face abuts
the front edge of each back upright. This piece is a
spacer. Position a 1 1/2" slat so its back edge abuts
the front face of the spacer. Secure the second slat
with finish nails and glue. Remove the spacer.
4. Install the rest of the
1 1/2" slats equally spaced to fill in the area
between the front 3 1/2" slat and the rear 1 1/2"
slat.
1.) Back upright
2.) Spacer
3.) rear 1 1/2" slat
Install the Backrest
1. Rout or cut a 1/4" wide by 3/4" deep groove centered on one
edge of the backrest top rail. Use a router and a 1/4" round
over bit to round over the rail's edge on the opposite edge
from the groove. The edge with the groove is the bottom and
the rounded edge is the top.
2. Position the rail so the top corner is 5/8" in from the back edge of the back uprights and the
bottom corner is 1 1/8" in from the back edge of the back uprights. Bore countersink holes in
the back uprights so you can drive screws into the ends of the rail. Secure the rail in place
with screws and glue.
3. Mill 3/4" long by 1/4" thick tenons into one end of each backrest slat. The tenoned end of the
slat is the top.
4. Use a router and a 1/4" round over bit to round over the edges of the 1 1/2" backrest slats.
5. Place a slat at each end of the top rail 1 1/2" in from
the end of the rail. Secure the slats by gluing the
tenons into the rail's groove and driving 4d finish
nails through the slat into the rear 1 1/2" seat slat.
6. Install the remaining seat slats, evenly spaced
across the back rest.
7. Position the back 3 1/2" seat slat in place so its front
edge abuts the back faces of the backrest slats.
Secure the slat in place with finish nails and glue.
Install the backrest slats.
Attach the Armrests
1. Attach two 3 1/2" long 3/4"x3/4" cleats to each
front upright with 4d finish nails and glue. The top
edges of the cleats should be flush with the ends of
the uprights.
http://www.lowes.com/lowes/lkn?action=howTo&p=Build/GardenBench&print=true 2008-12-27
Build a Garden Bench Strona 4 z 5
2. Attach one 3 1/2" long 3/4"x3/4" cleat to the
outside face of each back upright level with the
cleats on the front uprights.
3. Bore a 3/16" diameter hole vertically in the center of
each cleat.
4. Measure in from the back end of one armrest 3 1/2"
and use a square to make a line across the armrest.
Measure in from the inside edge of the armrest and
mark it at 1" and 1 3/4". Use a square to mark lines
from the back edge of the board to the line you've
already drawn across the board. Use a band saw or
jigsaw to cut out the 3 1/2" by 3/4" notch made by
the lines.
Attach cleats to both sides of each front
upright.
5. Test fit the
armrest.
The notch
should fit
around the
back rail
with the
wide tail
over the
back cleat.
The front of
the armrest
should
overhang
the front
rail by 3/4"
to 1".
Test fit the armrest.
6. Make the second armrest as a mirror of the first.
7. Secure the armrests in place with glue and screws driven through the cleats into the bottom
faces of the armrests.
8. Lay the 2" by 3/4" backrest stiffener across
the tops of the narrow armrest tails. Glue and
nail the stiffener in place with 4d finish nails.
9. Once the bench is built, sand and finish it as
you like or leave uncoated and allow it to
weather to a beautiful silver-gray.
The finished garden bench.
Was this information helpful? Please let us know your do-it-yourself experiences. We'd love to hear from you!
These How-To's are provided as a service from Lowe's, the Original Home Improvement Warehouse of How-
To information for the World Wide Web. The information in Lowe's "How-To" clinics is intended to simplify
jobs around the house. Tools, products, materials, techniques, building codes and local regulations change;
therefore, Lowe's assumes no liability for omissions, errors or the outcome of any project. The reader must
always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to
consult with a licensed professional if in doubt about any procedures. Please read our terms of use.
http://www.lowes.com/lowes/lkn?action=howTo&p=Build/GardenBench&print=true 2008-12-27
Build a Garden Bench Strona 5 z 5
http://www.lowes.com/lowes/lkn?action=howTo&p=Build/GardenBench&print=true 2008-12-27
Wyszukiwarka
Podobne podstrony:
Classic Cedar Garden BenchWoodworking Plans Garden Bench(1)Gardening BenchBench garden bench 2Bench Gardening BenchBuild a Tree Bench lawkaClassic Cedar Garden Bench(1)Bench garden sofaBench Garden seat 3 seaterBench Garden Redwood Bench PlansHow to Build a Walk Through Garden PergolaBuild Tribot (2)childs bench toyboxbuild logiwięcej podobnych podstron