Photography Understanding Exposure


PHOTOGRAPHY: UNDERSTANDING EXPOSURE
A tutorial by
Jean-Sébastien Monzani - www.simplemoment.com
© 2003  do not print or copy this in another article or book
There are multiple ways of measuring exposure on a camera:
 Center weighted average (from older cameras) and matrix decomposition of the luminosity
(newer cams) tend to average the lightning conditions and set a mean exposure. If you want to
control exposure, you canÄ…t rely on them.
 Spot or partial metering with meter the light only on a specific area (the center of the focus
screen).
Imagine youÄ…re metering an object. How can the camera know whether itÄ…s black or white? Well
the answer is simple: CAMERA CANÄ…T DETERMINE THIS BY THEMSELVES. They
consequently assume that the brightness of the subject is somewhat between black and white. All
cameras are calibrated to give exposure for a middle grey called: 18% GREY.
This grey is normalized; however, you can safely assume that itÄ…s a not too dark grey. Kodak sells
special grey cards if youÄ…re interested. Otherwise, create a grey with 80% of black on your
computer screen. The 18% grey looks almost like that.
Remember that this 18% grey is a convention.
In order to precisely determine exposure, you will need to meter your subject and compensate
the recorded value. Imagine that youÄ…re measuring snow. With spot meter, the camera assumes
that snow is 18% grey. It is obviously not. So, overexpose the read value by, say, +3 EV so that it
is closer to white. Similarly, measuring a very dark thing might require a  1 or  2 EV
compensation. Be careful, what IÄ…m writing here is relevant for digital and slide. Negative offers
alternative measurements (this is explained below).
SO, RULE NUMBER 1: SWITCH TO SPOT METER (or use center weighted and fill the
viewfinder with the area that you wish to meter).
The media is important. There are two categories:
 Slide and digital sensors are very picky on recording information. Anything below  2 Ev will be
black, and above +3 Ev will be white. (Ev = Exposure Value)
 Negative film can record information from  2 EV to +5 EV. But be careful: paper will only print a
~5Ev range (this is a technical limitation). So, during the printing process, you can vary the paper
exposure time so that you print, say, the +0EV to +5EV range of your film.
RULE NUMBER 2: THERE IS NOT A UNIQUE GOOD EXPOSURE IN A CERTAIN
SITUATION.
Exposure depends on what you wish to record. Say youÄ…re shooting someone on a bright day
with the sun at their back. An average metering will try to expose for the whole scene. Since itÄ…s
so bright, it will tend to darken the overall picture. And bang your portrait is too dark to see any
details.
Another example: your subject is in bright sunlight. If it receives directly the sun, then the
measurement of the global scene will be OK because the subject itself is as bright as the scene.
Want another one? Night photography: in this case, most of the scene is dark, with few bright
light spots. The camera in matrix mode will overexpose the scene, assuming that it should be
overall closer to an average grey. Obviously, it is not! The result will be a grey pic with burned
highlights. Since you WANT a black image here, underexpose by  2 or  3 EV.
RULE NUMBER 3: METER FOR YOUR SUBJECT
Using spot metering; you meter only your subject. Remember that I told you the camera will
meter for an 18% grey. Is your subject 18% grey? Uh, not easy to say.
LetÄ…s take snow. ItÄ…s not grey but white. I could assume itÄ…s +3EV. So, I can measure it, and if my
camera says, for instance f/16 1/1000 I can overexpose by 3 EV  > f/16 1/125 (1/1000 >1/500 >1/250
>1/125)
On caucasian skin, you can safely assume a +1EV compensation. Meter for instance the hand of
your subject, and overexpose by one stop (=1EV)
What I gave you is the right GLOBAL exposure. This is the way to operate with slides and digital.
RULE NUMBER 4: WITH NEGATIVE FILM, THE INTERPRETATION IS YOURS
Negative film is much more flexible. A negative is not reality but a reverse of it. During the
printing process (and assuming you can do it manually  otherwise, itÄ…s useless), you can vary the
paper exposure time so that you brighten or darken the overall image as you like.
Say you have shot two images: one at 1/30, one at 1/60, both at the same aperture, which will give
differing exposures. If you print the first one in 2 sec and the second in 1 sec, you will end up
with the same print, because you have compensated for the under/over exposure in the printing
process.
Thus, the interpretation is yours.
WhatÄ…s the good exposure then? Well, itÄ…s the one that gives enough details in your subject. You
can meter an average luminosity zone on your subject and place it at +1EV: youÄ…ll record enough
information in dark and bright areas. These considerations apply to negative scans too.
CONCLUSION: for a portrait, meter the personsÄ… face in spot mode, and set exposure to +1EV
Another example: imagine youÄ…re photographing a person with dark skin.
 with slide and digital, meter the face and use this value. You wonÄ…t need to overexpose by one
stop because youÄ…re recording a darker area.
 with negative, you can still overexpose by +1EV. YouÄ…ll record very rich deep dark tones and
you just have to compensate during printing.


Wyszukiwarka

Podobne podstrony:
Understanding Exposure (Luminous Landscape)
2001 07 Gimp Workshop Photograph Reprocessing
[Photography Ebook] digital photography hacks
understanding peerpoints
understanding switching?sics
Understanding and Managing Polymorphic Viruses
understanding peerpoints
understanding peerpoints
Exploring Digital Photography
understanding garmin online
Fotograf Wojenny War Photographer 2001
understanding computers
Understanding Fan Curves
Depeche Mode Photographic
Top Photography Tips [David Peterson]
Night Photography

więcej podobnych podstron