SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
MAKE
CITROEN
MOD.
EVASION
YEAR.
01 âÄ…Ĺ‚ PETROL
DIESEL
X
ALARM/SIREN
Position the compact alarms and the sirens in the engine compartment, passenger’s side.
POSITION
CENTRAL UNIT POSITION
The modular systems and the modules should be positioned under the dashboard, driver’s side.
POWER SUPPLY
+30: connect to the YELLOW wire, at the position nr. 1, in the 15 way black connector coming out of the central doors locking unit located behind the glove compartment, passenger’s side.
-31: connect to the GREEN wire, at the position nr. 13 of the 15 way black connector coming out of the central doors locking unit located behind the glove compartment, passenger’s side.
IGNITION WIRE
+15/54: connect to the VIOLET wire, at the position nr. 5 of the 15 way black connector coming out of the central doors locking unit located behind the glove compartment, passenger’s side.
DIRECTION INDICATORS
Connect to the WHITE wire, at the position nr.10, and to the YELLOW wire, at the position nr.2, of the 15 way black connector, coming out of the central doors locking unit located behind the glove compartment, passenger’s side.
ELECTRIC WINDOWS
Positive control signal
Front window, driver’s side:
cut the WHITE wire located in the wiring harness coming out of the motor of the driver’s side door.
Front window, passenger’s side:
cut the PINK wire.
Rear window, driver’s side:
cut the BLUE wire.
Rear window, passenger’s side: cut the GREEN wire.
These wires are in the wiring harness coming out of the driver’s side door.
Compass rear window, driver’s side: cut the PINK wire located in the wiring harness coming out of the relative motor.
Compass rear window, passenger’s side: cut the PINK wire located in the wiring harness coming out of the relative motor.
The above motors are located behind the plastic cover of the supports of the hatchback.
CENTRAL DOORS LOCKING
Negative control signal
It is necessary to cut the wire at the position nr. 5 located in the wiring harness coming out of the 26 way yellow connector of the central doors locking unit placed behind the glove compartment, passenger’s side. It is suggested to refer to the diagram nr. 71 for antithefts of the Bridge serie or to the diagram nr. 71A for antithefts of the 3100 serie.
IMMOBILISATION POINT
Gasoil pump
Cut the LIGHT BLUE wire, at the position nr. 121, under the BROWN double relay, located in the engine compartment, behind the driver’s side headlamp.
STARTER CUT OFF
+ 50: Cut the WHITE wire located in the wiring harness coming out of the black connector of the ignition key.
BONNET SWITCH
Install an additional switch on the front headlamp support grill, driver’s side.
DOORS SWITCH
Connect to the GREY wire, at the position nr. 15, of the 15 way black connector coming out of the central doors locking unit placed behind the glove compartment, passenger’s side.
BOOT SWITCH
Connect to the wire marked 8616, at the position nr. 16, of the 26 way yellow connector, coming out of the central doors locking unit placed behind the glove compartment, passenger’s side.
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed cieva01gbd.doc
as per the instructions given on the product installation manual.
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
FITTING DIAGRAM N° 71
To make the central doors locking on CITROEN BERLINGO – EVASION – XSARA 2 mod. 2001
(for â€Ĺ›Bridge” car alarms)
VIOLET/ORANGE ORANGE GREY/BLACK VIOLET
Towards the
driver’s side door
M
Connector coming out of the central doors locking unit of the vehicle, located behind the glove compartment, passenger’s side.
Note: The wire indicated in the alarm fitting instructions of Citroen Berlingo, Evasion and Xsara 2 must be interrupted as per the above drawing. Pay attention that the position of the wire that must be interrupted changes as per the vehicle.
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed cieva01gbd.doc
as per the instructions given on the product installation manual.
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
FITTING DIAGRAM N°71A
To make the central doors locking on CITROEN BERLINGO – EVASION – XSARA 2 mod. 2001
(for 3100 serie car alarms)
VIOLET/WHITE ORANGE GREY/BLACK VIOLET
ORANGE/WHITE
Towards the
driver’s side door
M
Connector coming out of the central doors locking unit of the vehicle, located behind the glove compartment, passenger’s side.
Note: The wire indicated in the alarm fitting instructions of Citroen Berlingo, Evasion and Xsara 2 must be interrupted as per the above drawing. Pay attention that the position of the wire that must be interrupted changes as per the vehicle.
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed cieva01gbd.doc
as per the instructions given on the product installation manual.
Wyszukiwarka
Podobne podstrony:
CISAX01GBD id 2064757 NieznanyCIEVA01GBDTR1 id 2491343 NieznanyCIC303GBDT id 2064750 NieznanyCISAX01GBDT id 2064758 NieznanySGH 2200 id 2230801 Nieznany111003105109 stress id 2048457 NieznanyCIXS201GBD id 2064760 NieznanyTOCEL96GBB id 2491297 Nieznany1078 2 FEA209544 128UEN A id 22 NieznanyMcRib(r) Sandwich id 2201097 NieznanyBD V600 L3 C A3 V1[1] 1 id 2157 NieznanyDOC0534 id 2032985 Nieznany8 17 id 2009842 NieznanyREKAN02GBBT id 2491218 Nieznanycialo albatros id 2035175 Nieznanywięcej podobnych podstron