SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
PETROL X
VOLKSWAGEN GOLF 4* 98 DIESEL
MAKE MOD. YEAR
* models with original equipment keyless entry system.
ALARM/SIREN Position the compact alarms and the sirens on the right of the engine compartment.
Alternatively, on the support panel of the battery using the original holes. Install the
POSITION
modular systems and the modules under the cover panel of the control pedals, under the
dashboard, driver s side.
POWER SUPPLY + 30: connect to the pin marked +30 directly on the terminal strip near the relay box,
under the dashboard, driver s side. Alternatively to the RED/GREEN wire coming out of
the direction indicators switch.
- 31: connect to one ground terminal on the final part of the central unit support.
IGNITION WIRE + 15/54: connect to the 1 mm2 BLACK/GREEN wire at the position nr. 2 of the LIGHT
BROWN connector marked T6.
DIRECTION INDICATORS Connect to the 1 mm2 WHITE/BLACK and GREEN/BLACK wires located at the positions
nr. 13 and nr. 14 of the 23 way black connector of the central unit of the vehicle.
ELECTRIC WINDOWS Comfort closing
It is necessary to temporize the YELLOW/BLUE doors closing wire (negative).
ALARM CONTROLS Negative control signal
Connect to the YELLOW/GREEN wire at the position nr. 4 (unlock) and to the
YELLOW/BLUE wire at the position nr. 24 (lock) located in the 29 way connector marked
T29 of the central unit, inside the driver s door.
ALARM CONTROLS For antitheft art. 0144 - boot alarm control
Connect to the 0,5 mm2 BLUE wire at the positionT23/20 (set on) and to the green wire
at the position T23/19 (set off) located in the connector coming out of the central doors
locking unit marked J393.
In this way the alarm system receives the open/close signals of the central doors locking
unit. Therefore it is suggested to make the doors closure pressing 2 times the radio
control switch in order to activate the safety lock.
IMMOBILISATION POINT 1 Fuel pump
Cut the VIOLET/WHITE wire located at the position nr. 6 of the red connector marked
S3 , located behind the relay plate, on the left of the steering column.
IMMOBILISATION POINT 2 + 50: Cut the RED/BLACK wire located at the position nr. 3 of the 6 way light brown
connector, marked T6 , located under the left side of the dashboard.
BONNET SWITCH Install an additional switch on the headlamp support plate. As this plate is plastic made,
it is necessary to make a ground connection of the body switch.
DOORS SWITCH Connect to the BLUE/GREY wire located at the position nr. 16 of the 23 way black
connector of the central doors locking unit.
BOOT SWITCH Connect to the BROWN/BLACK wire at the position nr. 15 of the 23 way black connector
of the central doors locking unit.
vogol98gbbt.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
Wyszukiwarka
Podobne podstrony:
VOGOL98GBD id 2134837 NieznanyVOGOL98GBDTVOGOL98GBDVOGOL98GBBVOGOL98GBDT id 2134838 Nieznanywięcej podobnych podstron