{Change Comments ***********************************************************}
{
10/24/94 [cwh]
B001.81.4 ( from B001.81.3 )
Made changes to ZOnlyRep and FinishSub1 subs to properly handle
Feed connects and clearance moves.
}
{11/8/94
Modified: Fanuc 6M (FW) B001.81.4
For: Gibbs & Associates
Versions: Catalyst v2.14.12C/Compost 4.21.23
Changes made per Pete Jackson
Charles reported a problem involving operations that do not change coordinate systems from
previous operations.
Added ClearCSOffset at NotSameToolWFO and SameToolWFO subs.
DWB}
{
12/01/94
B001.81.6
Changed FirstOp3 to call out A0B0 to move to the first CS.
When possible, this should be changed to check the MDD and only call out the axes that
make sense.
Added RecallWFO sub-routine to NotSameToolWFO and SameToolWFO to ouput the current fixture offset
and A0B0. Added for easier restarts at the machine. Both are only called from NoMPs.
When possible, this should be changed to check the MDD and only call out the axes that
make sense.
}
{
12/02/94
Changed version number to .00 from .81
TH}
{
Format: Fanuc 6M (FW) B001.00.01
12/08/94
Added AAxisAvail? and BAxisAvail? checks to CSAngleA and CSAngleB subs
Added WFO1 and A0B0 if AxisAvail to End2:
TH}
{
Format: Fanuc 6M (FW) B001.00.01
12/09/94
Fixed RecalWFO to check AAxisAvail? and BAxisAvail?
Cleaned up FirstOp3 to use new checks placed in CSAngleA and CSAngleB
TH}
{
Format: Fanuc 6M (FW) B001.00.03
12/19/94
Added ClearCSOffset to OpenMP: CloseMP: and SubCSMP:
Added if AChange? OR BChange? to home postition call-out in SameToolOp1
Started using Flag('3') to determine toggle between incrementing through MPs and decrementing through MPs
Changed CloseMP to check Flag('3'). If true, the WFOs will increment from first to last. If false, the WFOs will
decrement from last to first.
Example:
TRUE for 4 parts: G54P1, G54P2, G54P3, G54P4
FALSE for 4 parts: G54P4, G54P3, G54P2, G54P1
This is most useful for tombstone machining on rotary tables. With this method, the code will machine part1, rotate, part2,
rotate, part3, rotate, part4, tool change, part4, part3, part2, part1, toolchange, etc. It minimizes the rotation and also
stops the machine from "winding up".
To do this a new sub was created called ToggleIncDecWFO. The flag is set to true in ProgStart and toggled inside CloseMP
after running through the parts
Replaced SetZRepInc and RestoreAbsOrInc with one sub called DoAbsOrInc. Any line with SetZRepInc now
has DoAbsOrInc as the first command after the SeqC.
TH}
{
Format: Fanuc 6M (FW) B001.00.04
1/10/95
NewToolOp3 now has an AbsOrInc on the line that calls out the Plane 'G80' CRCOff
NewToolOp5 no longer has the AbsOrInc command
NewToolOp5b has been created and has the AbsOrInc command
Changed MP1ToollAllPfu to call NewToolOp5b
Added AbsOrInc and Rapid to the FirstOperation? section of MP1ToollAllPXcp
Added Rapid to the NewTool? section of MP1ToollAllPXcp
Started using Flag ('4') to turn on Inc/Dec WFO's (See above). True means use Inc/Dec WFO's.
MP1ToollAllPXcp, MP1ToollAllPFU, and MPallTools1P now output WFO if NOT WorkFixtureOffsets?
TH}
{
Format: Fanuc 6M (FW) B001.00.05
1/13/95
Replaced TrackZNO# ZDepth# with TrackZNO# FIRST SPZ# in the drilling section
Formatted TrackZNO# to #4
}
{
Format: Fanuc 6M (FW) B001.00.06
2/15/95
Fixed RecallWFO: to output correct WFO# if WFOCS
TH}
{ Added ClearCSOffset to SubCSMP TH}
{
Format: Fanuc 6M (FW) B001.10
7/27/95
Added G52 style output for too many coordinate systems
Updated to .10 format
TH}
{1/17/96, Updated .10 to .11 version, MPK}
{2/26/96
Initial: Fanuc 6M (FW) B001.11
Created: Fanuc 6M (FW) B001.11.01
Develop: ComPost 4.21.34, Catalyst68K v3.02.02C
Comment: Corrections to Processor.
Corrected format of CSOffsetA# and CSOffsetB#.
To correct multiple parts output:
Added "OR Flag?('2')" to "IF WFOCS?" in "SubCSMP:".
To Simplify prog subs and correct errors in MP1ToollAllPXcp:
Changed FirstOp3a/NewToolOp5a to FirstOp4/NewToolOp6
Deleted NewToolOp5b sub and changed call to NewToolOp5 (they were identical!)
Deleted OfstOn and Cool On from FirstOp3/NewToolOp5
Added calls to FirstOp4/NewToolOp6 after calls to FirstOp3/NewToolOp5.
Changed StrtPos in MP1ToollAllPXcp to FirstOp3/NewToolOp5.
To correct a literal number 2 from being output when processing multiple parts:
Changed order of booleans from:
IF WFOCS? OR Flag?('2')
to:
IF Flag?('2') OR WFOCS?
Modified WFO Handling:
Changes:
Deleted RecallWFO sub. It was not used!
Deleted NotSameToolWFO & SameToolWFO subs.
Added WFOStuff sub.
Changed all WFO calls in main loops to WFOStuff.
Results:
Changes do not effect Multiple Parts output.
Correct WFO is output by default at the beginning of each tool.
G52, if used, is output by default at the beginning of each tool.
G52, without WFO, is output at SameTool only if there is a change.
Jim Radcliffe}
{3/1/96
Initial: Fanuc 6M (FW) B001.11.01
Created: Fanuc 6M MS [PW] Dxxx.11.01
ForUser: Petroline Wireling
Control: Fanuc 15M ?? / Moric-M6Y ??
Machine: Mori Seiki MV65/50 with Niken 4th&5th axis
Develop: ComPost 4.21.34, Catalyst68K v3.02.02C
Comment: New Processor per example readout and instructions.
This should be a good rough first draft to get a marked up readout to fine tune!
Jim Radcliffe}
{3/25/96, Tested ZOnlyRepAutoCycle, Changed version # to .12, MPK}
{Prog Numeric Format Definitions ****}
#1 = '#.00'
#2 = '#####.###;0'
#3 = '*#####.###;0'
#4 = '####.####;0'
#5 = '#######0'
#6 = '####^##0'
FORMAT(FileFeet#,1)
FORMAT(FileMeters#,1)
FORMAT(CSOffsetA#,3)
FORMAT(CSOffsetB#,3)
FORMAT(ToolDiameter#,4)
FORMAT(CSOffsetX#,4)
FORMAT(CSOffsetY#,4)
FORMAT(CSOffsetZ#,4)
FORMAT(TrackZNO#,4)
FORMAT(Program#,5)
FORMAT(Operation#,5)
FORMAT(Tool#,5)
FORMAT(NewWFO#,5)
FORMAT(ADD#,5)
FORMAT(CS#,5)
FORMAT(Parts#,5)
FORMAT(CallMasterNum#,5)
FORMAT(Dwell#,6)
{Prog Subroutines ****}
RestoreScale:
IF Metric? {CAM file is in Metric, tools and tool path}
SetScale('.03937007874') { change to English, this is an English post}
END
RETURN
DoSubComment:
IF UseComments? AND SubComment?
'( SUB NUMBER: ' Program# ' )' EOL
END
RETURN
DoOpComments:
IF UseComments?
SetScale('1')
IF OperationIDComment?
'( OPERATION ' Operation# ': ' OperationType$ ' )' EOL
END
IF OperationComment?
'( ' OperationComment$ ' )' EOL
END
IF WorkGroupComment?
'( ' WorkGroupComment$ ' )' EOL
END
RestoreScale
END
RETURN
CSWFO:
'G' ADD# CS# SUB# NewWFO# Num#('1')
RETURN
CalcCSWFO: {(iPart-1)*NumOfCS#)}
'G' ADD# MUL# NumOfCS# SUB# PartNum# Num#('1') ADD# CS# SUB# NewWFO# Num#('1')
RETURN
CSAngleA:
IF AAxisAvail?
SeqC 'M11' EOL
SeqC 'A' CSOffsetA# EOL
SeqC 'M10' EOL
END
RETURN
CSAngleAC:
IF AChange?
CSAngleA
END
RETURN
CSAngleB:
IF BAxisAvail?
SeqC 'M69' EOL
SeqC 'B' CSOffsetB# EOL
SeqC 'M68' EOL
END
RETURN
CSAngleBC:
IF BChange?
CSAngleB
END
RETURN
DoCSWFOComment:
'( CS#' CS# ' - ' CSComment$ ' )' EOL
'( ' CalcCSWFO '= X' CSOffsetX# ' Y' CSOffsetY# ' Z' CSOffsetZ# ' )' EOL
RETURN
DoCSG52Comment:
'( CS#' CS# ' - ' CSComment$ ' )' EOL
RETURN
PSInit:
MasterOpF
CallMasterOpF
RETURN
PSStuff:
RETURN
DoPostScript:
PSInit
EachPS
SeqC PostScript EOL
PSStuff
NextPS
RETURN
DoEndOpPS:
PSInit
EachEOPS
SeqC EndOpPS EOL
PSStuff
NextPS
RETURN
EntryMove:
IF FeedEntry?
SeqC Feed ZIn FeedEnt EOL
ELSE
SeqC RapidC ZIn EOL
END
RETURN
StartSub:
OpenSub
SubID EOL
DoSubComment
RETURN
SubWarning:
IF NOT FeedConnect?
IF AnyZshift?
' ' EOL
'( WARNING Z CLEARANCE WILL CHANGE WITH EACH CYCLE OF SUB REPEAT )' EOL
' ' EOL
END
END
RETURN
StdSub:
SeqC SubCall CallLab RepLab RepCycs EOL
StartSub
RETURN
FinishSub1: {part 1}
SeqC CRCOffC
IF NOT FeedConnect?
IF AutoCycle?
ZCP3C
ELSE
IF FIFO?
FeedC ZCP3C FeedEntC
ELSE
RapidC ZCP3C
END
END
END
EOL
RETURN
FinishSubG92: {part 2}
SeqC Preset ShiftRC EOL
SeqC EndSub EOL
CloseSub
SeqC Preset UnshftRC EOL
RETURN
ToggleIncDecWFO:
IF Flag?('3')
SetFlagF('3')
ELSE
SetFlag('3')
END
RETURN
OpenMP:
IF Flag?('2') OR WFOCS?
NewProg
StartSub
SaveCSProg
SaveCSOpStart
ClearCSOffset
ELSE
NewProg
IF WorkFixtureOffsets?
NewWFO
EachWFO {simple eachPart}
SeqC SetWFO EOL
SeqC SubCall CallLab RepLab OnePart EOL
IncWFO
NextWFO {simple NextPart}
ELSE
SeqC SubCall CallLab RepLab Parts EOL
END
StartSub
END
RETURN
CloseMP:
IF Flag?('2') OR WFOCS?
SeqC EndSub EOL
CloseSub
IF Flag?('3')
NewWFO
EachWFO {simple eachPart}
IF Flag?('2')
SeqC SetWFO EOL
EachCSOp
DoCSG52Comment
ClearCSOffset
SeqC 'G52X' CSOffsetX# 'Y' CSOffsetY# 'Z' CSOffsetZ# EOL
SeqC SubCall CallLabB CSSubID# RepLab OnePart EOL
NextCSOp
ELSE
EachCSOp
DoCSWFOComment
ClearCSOffset
SeqC CalcCSWFO EOL
SeqC SubCall CallLabB CSSubID# RepLab OnePart EOL
NextCSOp
END
ClearCSOffset
IncWFO
NextWFO {simple NextPart}
ELSE
LastWFO
EachWFO {simple eachPart}
IF Flag?('2')
SeqC SetWFO EOL
EachCSOp
DoCSG52Comment
ClearCSOffset
SeqC 'G52X' CSOffsetX# 'Y' CSOffsetY# 'Z' CSOffsetZ# EOL
SeqC SubCall CallLabB CSSubID# RepLab OnePart EOL
NextCSOp
ELSE
EachCSOp
DoCSWFOComment
ClearCSOffset
SeqC CalcCSWFO EOL
SeqC SubCall CallLabB CSSubID# RepLab OnePart EOL
NextCSOp
END
ClearCSOffset
DecWFO
NextPrevWFO {simple NextPart}
END
IF Flag?('4')
ToggleIncDecWFO
END
ELSE
IF WorkFixtureOffsets?
SeqC EndSub EOL
CloseSub
SeqC WFO1 EOL
ELSE
SeqC Preset ShiftPC EOL
SeqC EndSub EOL
CloseSub
SeqC Preset UnshftPC EOL
END
END
RETURN
SubCSMP:
IF Flag?('2') OR WFOCS?
IF ChangeCS?
SeqC EndSub EOL
CloseSub
NewProg
StartSub
SaveCSProg
END
ClearCSOffset
END
RETURN
DoAbsOrInc:
IF Flag?('1') AND AbsoluteMoves?
IF ZMove? AND AbsValue?
IncValue
ELSE
IF NOT ZMove? AND NOT AbsValue?
AbsValue
END
END
END
RETURN
DoDrillAbsOrInc:
IF Flag?('1') AND AbsoluteMoves?
IF SPZMove? AND AbsValue?
IncValue
ELSE
IF NOT SPZMove? AND NOT AbsValue?
AbsValue
END
END
END
RETURN
RestoreAbsOrInc:
IF Flag?('1') AND AbsoluteMoves? AND NOT AbsValue?
SeqC AbsValue EOL
END
RETURN
FormatArc:
DoAbsOrInc
IF ArcCW?
CWArcC
ELSE
CCWArcC
END
MoveXYZC
IF ArcIJFormat?
ArcIJC
ELSE
ArcRC
END
RETURN
CkCRC: { 4.2 }
IF XMove? OR YMove? { Approach Length Feature and Multiple Pockets }
IF NOT ZMove?
CRCOnC
IF NOT EmptyLine?
ResetCRCNum
END
END
END
IF LastFeat? AND EmptyLine? { Exit Length Feature }
CRCOffC
END
RETURN
StdLine: {enables CRC on first call}
IF Decelerate?
IF RoomToDecel?
DecelMove1
SeqC DoAbsOrInc CkCRC FeedC MoveXYZC FeedRateC CRCOffsetC EOL
DecelMove2
END
SeqC DoAbsOrInc CkCRC FeedC MoveXYZC DecelFeed CRCOffsetC EOL
ELSE
IF XMove? OR YMove? OR ZMove?
SeqC DoAbsOrInc CkCRC FeedC MoveXYZC FeedRateC CRCOffsetC EOL
END
END
RETURN
ToolPath:
EACHFeat
IF PointFeat?
IF AutoCycle?
SeqC MoveSXYC EOL
SeqC SubCall CallLab EOL
CalcACSRXY {calc tool position after sub call, CalcAutoCycleStatusRecordXY}
ELSE
SeqC DoDrillAbsOrInc MoveSXYZC EOL
END
ELSE
IF RapidFeat?
IF AutoCycle?
SeqC DoAbsOrInc
IF LastFeat?
CRCOffC
END
RapidC MoveXYZC EOL
ELSE
IF XMove? OR YMove? OR ZMove?
SeqC DoAbsOrInc
IF ZMove? AND NOT XMove? AND NOT YMove?
CRCOffC
END
RapidC MoveXYZC EOL
END
END
ELSE
IF LineFeat?
IF AutoCycle?
IF LastFeat?
SeqC DoAbsOrInc CRCOffC FeedC MoveXYZC FeedRateC EOL
ELSE
IF ZMove? {skip CRCOn until first non-Z move line, skipping ramps}
SeqC DoAbsOrInc FeedC MoveXYZC FeedRateC EOL
ELSE
StdLine {enables CRC on first call}
END
END
ELSE
StdLine
END
ELSE
IF ArcFeat?
EACHQuadrant { Do not use NOT, FIRST, LAST or NEXT modifiers in this loop }
IF LastQuadrant? AND Decelerate?
IF RoomToDecel?
DecelMove1
SeqC FormatArc ArcFeedC EOL
DecelMove2
END
SeqC FormatArc DecelFeed EOL
ELSE
SeqC FormatArc ArcFeedC EOL
END
NEXTQuadrant
END
END
END
END
NEXTFeat
RestoreAbsOrInc
RETURN
AutoCycCutSub1: {part 1}
SaveSubStatus {save tool position}
SetPass1 {element cut moves}
StartSub
SetSRXYtoSP
Seq IncValue EOL
RETURN
AutoCycCutSub2: {part 2}
ToolPath
SeqC AbsOrInc
IF Repeats? AND FeedConnect? AND ZshiftOnly?
ELSE
IF FIFO?
FeedC ZCP2 FeedEntC
ELSE
RapidC ZCP2
END
END
EOL
SeqC EndSub EOL
CloseSub
SetSRSubXY {restore SR to 1st position value}
SetSRSubMove
RETURN
AutoCycPat:
SetPass2 {position pattern}
ToolPath {call after NewProg for correct sub calls}
SetPass1 {reset}
RETURN
Milling:
IF AutoCycle?
NewProg
AutoCycCutSub1
EntryMove
AutoCycCutSub2
AutoCycPat
ELSE
EntryMove
ToolPath
END
RETURN
G92Sub:
SubWarning
StdSub
SeqC AbsOrInc Connect StrtPos EOL
Milling
FinishSub1
FinishSubG92
RETURN
ZonlyRepAutoCycle:
AutoCycPat {write pattern moves and main calls}
StartSub
NewProg
EachCycle
SetSRXYtoEP
IF FeedConnect?
IF NOT FirstCycle?
IF SPXMove? OR SPYMove?
SeqC Feed IncValue StrtPosC EOL
SeqC AbsOrInc
ELSE
SeqC Feed
END
ELSE
SeqC Feed
END
ZInPlusInc FeedEnt EOL
ELSE
IF NOT FirstCycle?
IF SPXMove? OR SPYMove?
SeqC Rapid IncValue StrtPosC EOL
IF FeedEntry?
SeqC AbsOrInc ZCP2PlusInc EOL
SeqC Feed ZInPlusInc FeedEnt EOL
ELSE
SeqC AbsOrInc ZInPlusInc EOL
END
ELSE
IF FeedEntry?
SeqC Rapid ZCP2PlusInc EOL
SeqC Feed ZInPlusInc FeedEnt EOL
ELSE
SeqC Rapid ZInPlusInc EOL
END
END
ELSE
IF FeedEntry?
SeqC Feed ZInPlusInc FeedEnt EOL
ELSE
SeqC Rapid ZInPlusInc EOL
END
END
END
IF FirstCycle?
SetStatusOff {protect Z position for incremental sub}
END
SeqC SubCall CallLab EOL
NextCycle
SetStatusOn
AutoCycCutSub1 {build element sub}
AutoCycCutSub2
IF FeedConnect? {there is no Z up in the sub}
IF FIFO?
SeqC Feed ZCP2 FeedEnt EOL
ELSE
SeqC Rapid ZCP2 EOL
END
END
SeqC EndSub EOL
CloseSub
{Element shift, not pattern}
RETURN
ZonlyRep:
EachCycle
IF NOT FirstCycle?
SeqC Connect StrtPos EOL {added Connect}
END
IF FeedConnect?
SeqC FeedC ZInPlusInc FeedEnt EOL {changed to FeedC}
ELSE {Entry/Exit Connect}
IF FeedEntry?
IF NOT FirstCycle?
SeqC RapidC ZCP2PlusIncC EOL {can't call for cycle =1} {added Rapid, reads better} {.71.2, changed to RapidC, reads better}
END
SeqC Feed ZInPlusInc FeedEnt EOL
ELSE
SeqC RapidC ZInPlusInc EOL {added Rapid, reads better} {changed to RapidC, reads better}
END
END
SeqC SubCall CallLab EOL
NextCycle
StartSub
TrackZNO# FIRST SPZ#
ToolPath
FinishSub1
SeqC EndSub EOL
CloseSub
RETURN
CheckPass:
IF AutoCycle? {use the correct StrtPos}
SetPass2
ELSE
SetPass1
END
RETURN
ProgStart:
InitProg
ReverseXZArcs
InitWFONum
SetFlood
SetFlagF('1') {not std sep sub Zreps in effect} {rep change 2}
SetFlagF('2') {not using G52's for multiple parts }
SetFlag('3') {True = incrementing WFO numbers for MP. False = decrementing WFO numebrs for MP}
SetFlag('4') {True = toggle between incrementing/decrementing WFO's }
UseSeparateSubCalls
SetMaxSeparateSubCalls('50')
SetMaxRPM('6000')
SetMaxFeed('196')
IF PSComment? AND UseComments?
'PostScript:' EOL
' Literals: put between single or double quotes.' EOL
' Separate commands and literals with at least one space.' EOL
' A CR ( RETURN key ) will start a new line.' EOL
' Commands: may be capital and/or lower case letters. Separate commands with a space.' EOL
' EndOP -' EOL
' all literals and commands before an ENDOP command' EOL
' will appear at the beginning of the operation. All ' EOL
' literals and commands after an ENDOP command will appear' EOL
' at the end of the operation. ' EOL
END
IF MultipleParts?
IF WorkFixtureOffsets?
IF LTEqual? MUL# Parts# NumOfCS# Num#('0')
SetWFOCS { use WFO for CS changes }
ELSE
SetFlag('2')
END
END
ELSE
IF LTEqual? NumOfCS# Num#('0') {****}
SetWFOCS { use WFO for CS changes }
END
END
RETURN
SkipToLastFeat:
EachFeat
IF LastFeat?
TrackXNO# SPX#
TrackYNO# SPY#
END
NextFeat
RETURN
SetDrillEndOpZ:
IF RetractToCP1?
TrackZNO# ClearancePlane1#
ELSE
TrackZNO# ClearancePlane2#
END
RETURN
OpGuts:
IF Milling?
SeqC ZCP2C EOL
IF Repeats?
NewProg
IF ZshiftOnly?
IF AutoCycle? {incremental Autocycle sub can have Z moves}
ZonlyRepAutoCycle
ELSE {Z shift only, NOT Auto Cycle}
IF UseSeparateSubCalls? AND CyclesLessThanMaxSubCalls?
SetFlag('1') {std sep sub Zreps are in effect} {rep change 2}
ZonlyRep {rep change 1}
SetFlagF('1') {not std sep sub Zreps in effect} {rep change 3}
ELSE {no sep subs desired}
G92Sub
END
END {end Auto Cycle IF}
ELSE {not Z only}
G92Sub
END {end Z only IF}
ELSE {no repeat OPs}
Milling
END
IF AutoCycle?
SeqC ZCP3C EOL
ELSE
IF FIFO?
SeqC FeedC CRCOffC ZCP3C FeedEntC EOL
ELSE
SeqC RapidC CRCOffC ZCP3C EOL
END
END
ELSE
IF Drilling?
IF Repeats?
NewProg
StdSub
SeqC AbsOrInc Rapid StrtPos EOL
END
SeqC DrillCP EOL
GetCycle
SeqC Cycle FromCP StrtPos ZDepth RLevel Dwell Peck Retract FeedEnt EOL
IF CallMasterOp?
SeqC SubCall 'P' CallMasterNum# EOL
SkipToLastFeat
ELSE
TrackZNO# FIRST SPZ#
IF MasterOp?
SetFlag('1') {std sep sub Zreps in effect}
NewMasterProg
SeqC SubCall CallLab EOL
StartSub
ToolPath
SeqC EndSub EOL
CloseSub
SetFlagF('1') {not std sep sub Zreps in effect}
ELSE
ToolPath
END
END
SetDrillEndOpZ
SeqC Rapid DrillOff ZCP3 EOL
IF Repeats?
FinishSubG92
END
END
END
RETURN
DefaultWFO:
IF NOT SameTool?
IF NeedWFO1?
SeqC WFO1 EOL
END
END
RETURN
DoCSG52:
DoCSG52Comment
DefaultWFO
SeqC 'G52X' CSOffsetX# 'Y' CSOffsetY# 'Z' CSOffsetZ# EOL
RETURN
DefaultCSG52:
IF NOT SameTool?
DoCSG52
END
RETURN
DefaultCSWFO:
IF NOT SameTool?
SeqC CSWFO EOL
END
RETURN
WFOStuff:
IF MultipleParts?
IF NOT WorkFixtureOffsets?
DefaultWFO
END
ELSE
IF WFOCS?
IF ChangeCS?
DoCSWFOComment
SeqC CSWFO EOL
ELSE
DefaultCSWFO
END
ELSE
IF ChangeCS?
DoCSG52
ELSE
DefaultCSG52
END
END
ClearCSOffset
END
RETURN
InitOp:
EOR EOL
ProgID1
IF UseComments? AND ProgramNameComment?
'( PROGRAM: ' ProgramName$ ' )'
END
EOL
IF ToolChangeAtHome?
SetHome
END
IF UseComments?
IF ProgramComment?
'( ' ProgramComment$ ' )' EOL
END
IF FormatNameComment?
'( FORMAT: ' FormatName$ ' )' EOL
END
IF TimeComment?
'( ' Date$ ' AT ' Time$ ' )' EOL
END
IF MovesComment?
'( OUTPUT IN ' MoveType$ ' INCHES )' EOL
END
IF PartsComment?
'( PARTS PROGRAMMED: ' Parts# ' )' EOL
END
IF StartToolComment?
'( FIRST TOOL NOT IN SPINDLE )' EOL
END
END
OpenSub
RestoreScale
ASCII('13') EOL
RETURN
FirstOp1:
Seq '( T' Tool# ' ' ToolDiameter# ' ' ToolType$ ' H' ToolOffset# ' D' CRCOffset# ' )' EOL
IF UseComments? AND ToolComment?
'( ' ToolComment$ ' )' EOL
END
SeqC OpToolID EOL
SeqC SpinOff EOL
SeqC IncValue OfstOff EOL
SeqC 'G30X0Y0' EOL
SeqC ToolChng EOL
DoOpComments
SeqC Plane 'G20' CRCOff DrillOff EOL
DoPostScript
RETURN
FirstOp2:
SeqC Speed SpinOn EOL
RETURN
FirstOp3:
CheckPass
SeqC AbsOrInc Rapid StrtPos EOL
CSAngleA
CSAngleB
RETURN
FirstOp4:
SeqC OfstOn EOL
SeqC CoolOn EOL
RETURN
NewToolOp1:
SeqC CoolOff EOL
IF AbsoluteMoves?
SeqC IncValue OfstOff EOL
SeqC AbsValue EOL
ELSE
SeqC OfstOff EOL
END
RETURN
NewToolOp2:
DoEndOpPS
IF ToolChangeAtHome?
SeqC Rapid Home SpinOff EOL
ELSE
SeqC SpinOff EOL
END
SeqC
IF LAST ProgStop?
'M0'
ELSE
ProgStop
END
ASCII('13') EOL
RETURN
NewToolOp3: {Start new Operation}
Seq '( T' Tool# ' ' ToolDiameter# ' ' ToolType$ ' H' ToolOffset# ' D' CRCOffset# ' )' EOL
IF UseComments? AND ToolComment?
'( ' ToolComment$ ' )' EOL
END
SeqC OpToolID EOL
SeqC SpinOff EOL
SeqC IncValue OfstOff EOL
SeqC 'G30X0Y0' EOL
SeqC ToolChng EOL
DoOpComments
SeqC Plane 'G20' CRCOff DrillOff EOL
DoPostScript
RETURN
NewToolOp4:
SeqC Speed SpinOn EOL
RETURN
NewToolOp5:
CheckPass
SeqC AbsOrInc Rapid StrtPos EOL
CSAngleA
CSAngleB
RETURN
NewToolOp6:
SeqC OfstOn EOL
SeqC CoolOn EOL
RETURN
SameToolOp1:
DoEndOpPS
IF LAST ProgStop?
SeqC CoolOff EOL
IF AbsoluteMoves?
SeqC IncValue OfstOff EOL
SeqC AbsValue EOL
ELSE
SeqC OfstOff EOL
END
SeqC SpinOff EOL
SeqC 'M0' EOL
ELSE
IF CoolOff? AND LAST NOT CoolOff?
SeqC CoolOff EOL
END
IF NewToolOffset? or ChangeCS?
IF AbsoluteMoves?
SeqC IncValue OfstOff EOL
SeqC AbsValue EOL
ELSE
SeqC OfstOff EOL
END
END
END
RETURN
SameToolOp2: {Start new Operation}
DoOpComments
DoPostScript
CheckPass
RETURN
SameToolOp3: {Start new Operation}
IF LAST ProgStop?
SeqC PlaneC AbsOrInc Rapid StrtPos SpeedC SpinOn EOL
CSAngleA
CSAngleB
SeqC OfstOn EOL
SeqC CoolOn EOL
ELSE
SeqC PlaneC AbsOrInc Rapid StrtPos SpeedC EOL
CSAngleAC
CSAngleBC
IF NewToolOffset? OR ChangeCS?
SeqC OfstOn EOL
END
IF NOT CoolOff? AND LAST CoolOff?
SeqC CoolOn EOL
END
END
RETURN
End1:
SeqC CoolOff EOL
IF AbsoluteMoves?
SeqC IncValue OfstOff EOL
ELSE
SeqC OfstOff EOL
END
RETURN
End2:
DoEndOpPS
IF FIRST ToolChangeAtHome? {added FIRST modifier}
SeqC AbsOrInc Rapid FirstHome SpinOff EOL
ELSE
SeqC SpinOff EOL
END
IF ProgStop?
SeqC 'M0' EOL
END
RETURN
End3:
SeqC IncValue 'G30X0Y0' EOL
IF AAxisAvail?
SeqC 'M11' EOL
SeqC IncValue 'G28A0' EOL
SeqC 'M10' EOL
END
IF BAxisAvail?
SeqC 'M69' EOL
SeqC IncValue 'G28B0' EOL
SeqC 'M68' EOL
END
SeqC EOP EOL
CloseSub
Post2 {organize Subs into one program}
EOR EOL
Close
IF UseComments?
SetScale('1') {restore scale for comments}
Reopen
IF FileBytesComment?
'( FILE LENGTH: ' FileBytes# ' CHARACTERS )' EOL
END
IF FileFeetComment?
'( FILE LENGTH: ' FileFeet# ' FEET )' EOL
END
IF FileMetersComment?
'( FILE LENGTH: ' FileMeters# ' METERS )' EOL
END
Close
END
RETURN
MPallTools1P: {Multiple Parts, All Tools 1 Part}
EachOp {Start of post processing}
IF FirstOperation?
InitOp
OpenMP
FirstOp1
WFOStuff
FirstOp2
FirstOp3
FirstOp4
ELSE
IF NewTool?
NewToolOp1
NewToolOp2 {to tool change, CS problem}
SubCSMP
NewToolOp3
WFOStuff
NewToolOp4
NewToolOp5
NewToolOp6
ELSE {implied SameTool?}
SameToolOp1
SubCSMP
SameToolOp2
SameToolOp3
END
END {common point for all operations}
OpGuts
NextOp {loops back to EachOP until last Operation}
End1 {End of program}
End2
CloseMP
End3
RETURN
MP1ToollAllPfu: {Multiple Parts, 1 Tool all Parts, full up}
EachOp {Start of post processing}
IF FirstOperation?
InitOp
FirstOp1
WFOStuff
FirstOp2
OpenMP
FirstOp3
FirstOp4
ELSE
IF NewTool?
NewToolOp1
CloseMP
NewToolOp2 {to tool change, CS problem}
NewToolOp3
WFOStuff
NewToolOp4
OpenMP
NewToolOp5
NewToolOp6
ELSE {implied SameTool?}
SameToolOp1
SubCSMP
SameToolOp2
SameToolOp3
END
END {common point for all operations}
OpGuts
NextOp {loops back to EachOP until last Operation}
End1 {End of program}
CloseMP
End2
End3
RETURN
MP1ToollAllPXcp: {Multiple Parts, 1 Tool all Parts, exit Clearance plane}
EachOp {Start of post processing}
IF FirstOperation?
InitOp
FirstOp1
WFOStuff
FirstOp2
FirstOp4
OpenMP
FirstOp3 {can't XY position before WFO}
ELSE
IF NewTool?
CloseMP
NewToolOp1
NewToolOp2 {to tool change, CS problem}
NewToolOp3
WFOStuff
NewToolOp4
NewToolOp6
OpenMP
NewToolOp5 {can't XY position before WFO}
ELSE {implied SameTool?}
SameToolOp1
SubCSMP
SameToolOp2
SameToolOp3
END
END {common point for all operations}
OpGuts
NextOp {loops back to EachOP until last Operation}
CloseMP {End of program}
End1
End2
End3
RETURN
NoMPs: {no multiple parts}
EachOp {Start of post processing}
IF FirstOperation?
InitOp
FirstOp1
WFOStuff
FirstOp2
FirstOp3
FirstOp4
ELSE
IF NewTool?
NewToolOp1
NewToolOp2
NewToolOp3
WFOStuff
NewToolOp4
NewToolOp5
NewToolOp6
ELSE {implied SameTool?}
SameToolOp1
SameToolOp2
WFOStuff
SameToolOp3
END
END {common point for all operations}
OpGuts
NextOp {loops back to EachOP until last Operation}
End1 {End of program}
End2
End3
RETURN
{Start of executable Prog, top level ****}
ProgStart {setup and initializations}
IF MultipleParts?
IF AllToolsOnePart?
MPallTools1P
ELSE {implied OneToolAllParts?}
IF FullUp?
MP1ToollAllPfu
ELSE {implied ExitClearancePlane?}
MP1ToollAllPXcp
END
END
ELSE
NoMPs
END
Wyszukiwarka
Podobne podstrony:
Fanuc 6M MS [PW] D953 12mFanuc 6M MS [MM] CT49 12Fanuc 6M MS [PW] D118 12mFanuc 6M MS C002 12Fanuc 6M Mat [ST] DU89 12 2Fanuc 6M MS (AE) M213 79 1Fanuc 6M MTS [GT] D717 12Fanuc 6T MS [PW] L465 85 1mFanuc 6M MS M002 87Fanuc 15M MS [TC] C861 12 1Fanuc 6M Varnsd [GT] D894 12 1Fanuc 6M MS [FN] M539 81 2Fanuc 6M MS (MM) M185 81 2Fanuc 6M MS [FN] M539 81 2mwięcej podobnych podstron