{Change Comments ***********************************************************}
{9/23/88
Copied & modified: Okuma OSP 3000-LC20 L049.51
For: Shultz
Machine: Okuma
Control: OSP 5000 LB15
Machine only has one Turret, no need to call for or see Tool# for 2nd Turret.
Deleted ToolOver20? stuff, added conventional OpToolID stuff.
Changed FORMATs to 4-place non-decimal trailing Zero's.
Added spaces between Codes.
JR}
{9/29/88
Modified: Okuma OSP 3000-LB20 L067.51
Worked on Canned Cycles.
BG,JR}
{5/9/89
Copied & modified: Okuma OSP 3000-LB20 L067.56
For: Petes Workshop
Machine: Okuma
Control: OSP 5000 LB15
New 1st line of program with End of Record code.
Changed FORMATs to decimal.
Modified Canned Cycles.
JR}
{9/27/89, updated & added PostScript to Okuma OSP 5000 LB15 L103.55, JR}
{3/15/90, Updated: Okuma OSP 5000 LB15 L103.61 to .69.3 format, JR}
{7/24/90, Added InitProg globally to posts with this remark, DWB}
{9/5/91, Updated Okuma OSP 5000 LB15 L103.70 to .82 format, JR}
{5/14/93
Modified: Okuma OSP 5000 LB15 L103.82
For: Gibbs & Associates
Updated to Version 4.1 per Fanuc 10T MS [-] L001.82.1 Format.
DWB}
{6/2/93
Modified: Okuma OSP 5000 LB15 L103.82.1
For: Gibbs & Associates/Cigraph PTY
Changes made per E-Mail from Maurizio at Cigraph PTY.
Change CutDepth to XCutDepth#/ZCutDepth# at CannedCycle RoughContour.
DWB}
{10/6/94
Updated: Okuma OSP 5000 LB15 L103.82.2
For: Gibbs & Associates/Cigraph PTY/MD Research
Versions: ncCad 4.33/ncCAM 4.33/ncPost 4.33.03/Compost 4.21.22
Updated to Version 4.1 per Fanuc 10T MS [-] L001.82.1a Format.
Added SetAbs at setup and initializations.
Added StandardXZArcs at setup and initializations.
Changed MoveType$ to literal 'ABSOLUTE' at FirstOperation.
Added AND NOT Threading? condition at AutoFinish.
Moved Post command in front of EOR EOL at end of Prog.
DWB}
{
Format: Okuma OSP 5000 LB15 L331.82.4
4/25/95
Removed .MIN from the program name
TH}
{Prog Numeric Format Definitions *******************************************}
#1 = '#.00'
#2 = '+####.####;0'
#3 = '#######0'
#4 = '###.##;0'
#5 = '####.####;0'
#6 = '###0'
#7 = '#'
FORMAT(FileFeet#,1)
FORMAT(FileMeters#,1)
FORMAT(XCutDepth#,2)
FORMAT(ZCutDepth#,2)
FORMAT(Program#,3) {.72}
FORMAT(Operation#,3) {.72}
FORMAT(Tool#,3) {.72}
FORMAT(Dwell#,4) {.72}
FORMAT(Peck#,5)
FORMAT(CalcEPRPM#,6)
FORMAT(RapidF#,7)
{Prog Subroutines **********************************************************}
RestoreScale:
IF Metric? {CAM file is in Metric, tools and tool path}
SetScale('.03937007874') { change to English, this is an English post}
END
RETURN
DoOpComments:
IF UseComments?
SetScale('1')
IF OperationIDComment?
'( OPERATION ' Operation# ': ' OperationType$ ' )' EOL
END
IF OperationComment?
'( ' OperationComment$ ' )' EOL
END
IF WorkGroupComment?
'( ' WorkGroupComment$ ' )' EOL
END
IF ToolTypeComment?
'( TOOL ' Tool# ': ' ToolSize$ ' ' ToolType$ ' )' EOL
END
IF ToolComment?
'( ' ToolComment$ ' )' EOL
END
RestoreScale
END
RETURN
PSInit: {reset flags from last Op, .70}
RETURN
PSStuff:
RETURN
DoPostScript:
PSInit
EachPS
SeqLabC PostScript EOL {literals}
PSStuff {commands}
NextPS
RETURN
DoEndOpPS:
PSInit
EachEOPS
SeqLabC EndOpPS EOL {literals}
PSStuff {commands}
NextPS
RETURN
StockOnNoCan:
IF NOT CannedCycle?
StockOn {need stock for SP positioning, if not a canned cycle}
END
RETURN
FeedNoCan:
IF NOT CannedCycle?
FeedC
END
RETURN
FeedRateNoCan:
IF NOT CannedCycle?
FeedRateC
END
RETURN
ODApproachSP:
SeqLabC StockOnNoCan ZSPC EOL
SeqLabC StockOff XOpCDC EOL
StockOnNoCan
IF NotEqual? CycleStartX# XOpCD#
SeqLabC FeedNoCan XSPC FeedRateNoCan EOL
END
RETURN
IDApproachSP:
SeqLabC StockOnNoCan ZSPC EOL
SeqLabC StockOff XOpCDC EOL { for SameTool ApproachID }
StockOnNoCan
IF NotEqual? CycleStartX# XOpCD#
SeqLabC FeedNoCan XSPC FeedRateNoCan EOL
END
RETURN
FaceApproachSP:
SeqLabC StockOnNoCan XSPC EOL { for SameTool ApproachFace }
SeqLabC StockOff ZOpCPC EOL
StockOnNoCan
IF NotEqual? CycleStartZ# ZOpCP#
SeqLabC FeedNoCan ZSPC FeedRateNoCan EOL
END
RETURN
AppMove:
StockOff ZCP
RETURN
Approach: { NOT FOR TAILSTOCK, .82 }
RapidF# { RapidF# Forces FeedRate }
IF ApproachOD?
SeqLabC StockOff XCP AppMove EOL
ODApproachSP
ELSE
IF ApproachID?
SeqLabC StockOff XOpCD AppMove EOL
IDApproachSP
ELSE {ApproachFace}
SeqLabC StockOnNoCan XSP AppMove EOL
FaceApproachSP
END
END
RETURN
CheckOffset:
DoEndOpPS
IF LAST ProgStop?
SeqLabC ' M0' EOL
ELSE
IF CoolOff? AND LAST NOT CoolOff?
SeqLabC CoolOff EOL
END
END
IF NewToolOffset?
SeqLabC LOfstOff '00' EOL
SeqLabC OpToolID LatheOffset EOL
END
IF ConstantSurfaceFeed?
IF LAST ConstantSurfaceFeed?
IF NotEqual? MaxRPM# LAST MaxRPM#
SeqLabC Preset MaxRPM EOL
END
ELSE
SeqLabC Preset MaxRPM EOL
SeqLabC CSSOn ' G96' Speed
END
ELSE
IF LAST ConstantSurfaceFeed?
SeqLabC CSSOff ' G97' Speed
END
END
IF LAST ProgStop?
SeqLabC SpeedC SpinOn EOL
SeqLabC CoolOn EOL
ELSE
SeqLabC SpeedC EOL
IF NOT CoolOff? AND LAST CoolOff?
SeqLabC CoolOn EOL
END
END
DoPostScript
RETURN
FormatArc:
IF ArcCW?
CWArcC
ELSE
CCWArcC
END
MoveXC MoveZC
IF ArcIJFormat?
ArcIJC
ELSE
ArcRC
END
RETURN
ToolPath:
EACHFeat
GetToolTip
IF LastFeat?
IF Drilling?
IF Tap?
SeqLabC SpinOff EOL
SeqLabC ' G4 P2000' EOL
SeqLabC Speed InverseSpinOn EOL
ELSE
IF Dwell?
SeqLabC ' G4 P' Dwell# EOL
END
END
END
END
IF PointFeat?
SeqLabC MoveSXYC EOL
ELSE
IF RapidFeat?
SeqLabC RapidC MoveXC MoveZC EOL
ELSE
IF LineFeat?
SeqLabC FeedC MoveXC MoveZC FeedRateC EOL
ELSE
IF ArcFeat?
EACHQuadrant { Do not use NOT, LAST, FIRST or NEXT modifiers in this loop }
SeqLabC FormatArc FeedRateC EOL
NEXTQuadrant
ELSE
IF ThreadFeat?
SeqLabC ' G33' MoveXC MoveZC ThrdLead EOL
Rapid
END
END
END
END
END
NEXTFeat
RETURN
{Start of executable Prog **************************************************}
{setup and initializations}
InitProg
SetAbs
PosSideLathe
StandardXZArcs
SetMaxRPM('10000')
SetMaxFeed('500')
IF PSComment? AND UseComments?
'PostScript:' EOL
' Literals: put between single or double quotes.' EOL
' Separate commands and literals with at least one space.' EOL
' A CR ( RETURN key ) will start a new line.' EOL
' Commands: must be all capital letters when typed in.' EOL
' ENDOP -' EOL
' all literals and commands before an ENDOP command' EOL
' will appear at the beginning of the operation. All ' EOL
' literals and commands after an ENDOP command will appear' EOL
' at the end of the operation. ' EOL
END
EachOp {Start of post processing *********************}
GetLCycle
IF FirstOperation?
'$' ProgramName$ EOR EOL
IF UseComments?
IF ProgramNameComment?
'( PROGRAM: ' ProgramName$ ' )' EOL
END
IF ProgramComment?
'( ' ProgramComment$ ' )' EOL
END
IF FormatNameComment?
'( FORMAT: ' FormatName$ ' )' EOL
END
IF TimeComment?
'( ' Date$ ' AT ' Time$ ' )' EOL
END
IF MovesComment?
'( OUTPUT IN ABSOLUTE INCHES )' EOL
END
END
RestoreScale
OpenSub
StockOff {.71.2}
SetHome
DoOpComments
DoPostScript
Plane
IF ConstantSurfaceFeed?
SeqLab Preset MaxRPM EOL
SeqLabC Rapid CSSOff ' G97' CalcRPM1
ELSE
SeqLab Rapid CSSOff ' G97' Speed
END
OpToolID LatheOffset SpinOn CoolOn ' M42' EOL
Approach
ELSE
IF NewTool?
{Finish off last Operation}
StockOff {.62}
Rapid
IF LAST ApproachOD?
SeqLabC XCPC EOL
ELSE
IF LAST ApproachID?
SeqLabC LAST XOpECDC EOL
END
END
SeqLabC ZCPC EOL
DoEndOpPS
IF LAST ConstantSurfaceFeed?
SeqLabC CSSOff ' G97' CalcRPM2 EOL
END
SeqLabC NewHome
IF LAST ProgStop?
' M0' EOL
ELSE
ProgStop EOL
END
{Start new Operation}
DoOpComments
DoPostScript
IF ConstantSurfaceFeed?
SeqLab Preset MaxRPM EOL
SeqLabC Rapid CSSOff ' G97' CalcRPM1
ELSE
SeqLab Rapid CSSOff ' G97' Speed
END
OpToolID LatheOffset SpinOn CoolOn ' M42' EOL
Approach
ELSE
IF SameTool? {.62}
{Start new Operation}
StockOff
DoOpComments
IF LAST StraightConnect?
CheckOffset
Rapid
SeqLabC StockOnNoCan XSPC ZSPC EOL
ELSE
Rapid
IF ApproachOD?
IF LAST ApproachOD?
SeqLabC LAST XOpECDC EOL
ELSE {around}
IF LAST ApproachID?
SeqLabC LAST XOpECDC EOL
END
SeqLabC ZCPC EOL
SeqLabC XCPC EOL
END
CheckOffset
ODApproachSP
ELSE
IF ApproachID?
IF LAST ApproachID?
SeqLabC LAST XOpECDC EOL
ELSE
IF LAST ApproachOD? {around}
SeqLabC XCPC EOL
END
SeqLabC ZCPC EOL
SeqLabC XOpCDC EOL
END
CheckOffset
IDApproachSP
ELSE {ApproachFace}
IF LAST ApproachFace?
SeqLabC LAST ZOpECPC EOL
ELSE
IF LAST ApproachOD? {around}
SeqLabC XCPC EOL
ELSE {LAST ApproachID}
SeqLabC LAST XOpECDC EOL
END
SeqLabC ZCPC EOL
END
CheckOffset
FaceApproachSP
END
END
END
END
END
END {common point for all operations}
IF ConstantSurfaceFeed? AND NOT SameTool?
SeqLabC CSSOn ' G96' Speed EOL
END
IF CannedCycle?
StockOff
IF Roughing?
IF NOT RoughSimple?
TagInc
SetPass2
IF RoughContour?
SeqLabC ' G85 Nł' Tag#
IF ApproachFace?
' D' ZCutDepth#
ELSE
' D' XCutDepth#
END
FeedRate XStkLeft ZStkLeft EOL
'>' Tag# EOL
IF ApproachFace?
SeqLab ' G82' EOL
ELSE
SeqLab ' G81' EOL
END
ELSE
IF RoughPatternShift?
SeqLabC ' G86 Nł' Tag#
IF ApproachFace?
' D' ZCutDepth#
ELSE
' D' XCutDepth#
END
FeedRate XStkLeft ZStkLeft EOL
'>' Tag# EOL
IF ApproachFace?
SeqLab ' G82' EOL
ELSE
SeqLab ' G81' EOL
END
END
END
SeqLabC StepMove StrtPos EOL
ToolPath
SeqLabC ' G80' EOL
IF AutoFinish?
SeqLabC ' G87 Nł' Tag# EOL
END
SetPass1
TrackXNO# CycleStartX#
TrackZNO# CycleStartZ#
END
ELSE
IF Threading?
{ G72 Face Threads modification would require changes to XTapAtZ command with W Address }
SeqLabC ' G71' XatFinZ FinZ XTapAtZ
IF SingleEdgeCut?
ToolAngle
ELSE
' B0'
END
CutDepth ThrdHeight ThrdLead ' M32'
IF ConstantVolumeCut?
' M75'
ELSE
' M74'
END
IF Chamfer?
' M23'
ELSE
' M22'
END
EOL
IF AutoFinish?
SeqLabC ' G33' XatFinZ FinZ XTapAtZ ThrdLead EOL
SeqLabC Rapid XCSP EOL
SeqLabC ZCSP EOL
END
ELSE
IF Drilling?
SeqLabC
IF Tap? AND NOT CWSpindle?
' G78'
ELSE
LCycle
END
XCSP ZDepth Peck Retract
IF PeckFullRetract?
' L' Peck#
END
FeedRate Dwell EOL
END
END
END
ELSE
StockOn
SetPass1
ToolPath
IF AutoFinish?
IF NOT Drilling? AND NOT Grooving? AND NOT RoughSimple? AND NOT Threading?
StockOff
IF Turning?
SetPass1
RapidC
IF ApproachFace?
SeqLabC ZOpECPC EOL
FaceApproachSP
ELSE
SeqLabC XOpECDC EOL
IF ApproachOD?
ODApproachSP
ELSE {ApproachID}
IDApproachSP
END
END
ELSE
SetPass2
SeqLabC RapidC XSPC ZSPC EOL
END
SeqLabC StockOff StrtPosC EOL
ToolPath
END
END
IF Drilling? AND Tap?
SeqLabC SpinOff EOL
SeqLabC ' G4 P2000' EOL
SeqLabC Speed SpinOn EOL
END
END
NextOp {loops back to EachOP until last Operation}
{End of program ************************************************************}
{finish last operation}
StockOff
Rapid
IF ApproachOD?
SeqLabC XCPC EOL
ELSE
IF ApproachID?
SeqLabC XOpECDC EOL
END
END
SeqLabC ZCPC EOL
DoEndOpPS
SeqLabC CoolOff EOL
IF ConstantSurfaceFeed?
SeqLabC CSSOff ' G97 S' CalcEPRPM# EOL
END
SeqLabC FirstHome
IF ProgStop?
' M0'
ELSE
ProgStop
END
EOL
SeqLabC EOP EOL
Post
EOR EOL
Close
Retag
IF UseComments?
SetScale('1') {restore scale for comments}
Reopen
IF FileBytesComment?
'( FILE LENGTH: ' FileBytes# ' CHARACTERS )' EOL
END
IF FileFeetComment?
'( FILE LENGTH: ' FileFeet# ' FEET )' EOL
END
IF FileMetersComment?
'( FILE LENGTH: ' FileMeters# ' METERS )' EOL
END
Close
END
Wyszukiwarka
Podobne podstrony:
Okuma 5000 LB15 (CE) L171 82 1Okuma OSP 5000 LB15 SM L553 85mOkuma OSP 500L GTR L290 82 2Okuma OSP 5020L [AT] L397 82 3Okuma OSP 2200 LSN10 L089 82Okuma 3000 LB20 [MK] L134 82 1Okuma OSP 3000 LC10 L069 82 1Okuma OSP 3000 LB20 L067 82Okuma OSP5k LB15 [IM] L434 85 1Okuma OSP 2200 LC10 L058 82 1Okuma 2200 LSN10 (CI) L238 82Okuma OSP 5000 LC10 L235 82 2Okuma OSP 5000 LB10 L351 82 2Okuma OSP 5000 [NC] L606 85 1GE 550 Okuma LS N L059 82 1więcej podobnych podstron