CHAPTER 3 PERIODICITY
(IB TOPICS 3 AND 13) SUMMARY
Basic concepts
" Periodic Table is arranged according to increasing atomic number and consists of
horizontal rows called periods, and vertical columns called groups (or families). The
arrangement is such that elements with similar chemical properties fall directly
beneath each other in the same group.
" A period is a series of elements arranged according to increasing atomic number,
which begins with the first element having one electron in a new main energy level.
" A group is a vertical column consisting of elements with the same electron
arrangement in their outer energy levels, which gives the group similar chemical
properties.
" Modern Periodic Law states that chemical and physical properties of elements vary
periodically if elements are arranged in order of increasing atomic numbers.
" Periodicity is the regular repeating of properties according to arrangement of elements
in the periodic table (i.e., after regular intervals) such as atomic radius, ionisation
energy, etc. arising from the systematic filling of successive energy level.
" Valence electrons are electrons in the outermost energy level (the highest energy level)
of an atom and are usually the electrons that take part in a chemical reaction.
" Properties of elements are chiefly due to the number and arrangement of electrons in the
outer energy level of atoms.
" The number of valence electrons is the same for a group, but increases across a period.
" The transition metals are the large d-block elements in the middle of the Periodic
Table from Sc to Zn etc. (includes three transition series).
" Ionization Energy (IE) is the minimum energy required to form a mole of 1+ ions (by
removing an electron from each atom) in the gaseous state: M (g) M+ (g) + e
(units: kJ mol 1)
" Electronegativity is a measure of how strongly the atom attracts the electrons in a
covalent bond.
© IBID Press 2007 1
CHAPTER 3 PERIODICITY
(IB TOPICS 3 AND 13) SUMMARY
Alkali metals
are extremely reactive, electropositive metals. They react vigorously with O2 in the air and
oxidize fast to form ionic oxides.
contain one valence electron that is very easily lost due to low ionization energy; thus they
are very good reducing agents: Na (s) Na+ (aq) + e .
In compounds, these exist as +1 cations with noble gas electron configuration.
Since a valence e further away from the nucleus down a group is more easily removed,
reactivity increases from Li to Cs.
Reaction with Water: Reactivity increases down the group:
2 Li (s) + 2 H2O (l) 2 LiOH (aq) + H2 (g) + heat
" Reaction with Halogens: form ionic salts (e.g. Na+Cl ); the reaction is highly exothermic.
The alkali halides are ionic, neutral, water-soluble, white crystalline compounds.
2 Na (s) + Cl2 (g) 2 NaCl (s) + heat
Halogens
Are non-metallic; metallic character increases down the group (I2 is a shiny solid).
Higher ionization energies indicate little tendency to lose electrons.
Have 7 valence electrons and achieve noble gas configuration by gaining an electron to
form an anion (e.g. Cl ), or by sharing an e pair with another atom (e.g., Cl2).
Are diatomic (F2, Cl2, Br2, I2), non-polar molecules. They are simple molecular
substances with only weak van der Waal s between molecules (Bonding, Ch. 4).
Higher electronegativities mean that halogens have a tendency to accept an electron, and
act as oxidizing agents: X2 +2 e 2 X .
Oxidizing strength decreases down the group, since the atom gets larger and attraction for
the electrons decreases.
Reactions of halogens X2 with halide ions X : Halogen Displacement Reactions: Weaker
halogens are displaced from their salts by more powerful oxidizing agents. Thus Cl2 can
displace Br2 from Br and I2 from I (as it is a stronger oxidizing agent than both Br and I),
but it cannot displace F2 from F .
Identification of Halide Ions Reaction with silver ions, Ag+: Silver halides, with
different colored precipiates can be used to identify a halide ion:
1. AgNO3 (aq) + NaF (aq) No precipitate formed.
2. AgNO3 (aq) + NaCl (aq) AgCl (s) + NaNO3 (aq), a white precipitate.
3. Ag+ (aq) + Br (aq) AgBr (s), a cream precipitate.
4. Ag+ (aq) + I (aq) AgI (s), a yellow precipitate.
© IBID Press 2007 2
CHAPTER 3 PERIODICITY
(IB TOPICS 3 AND 13) SUMMARY
Period 3 elements
Ionization energy and electronegativity increase across the period; thus elements do not
lose electrons as easily and metallic character decreases across the period. Bonding
changes from metallic to covalent.
" Na, Mg and Al are metallic, good conductors of heat and electricity, with low to medium
melting points, and lower electronegativities.
" Si is a semi-conductor / metalloid. It forms a network covalent solid of very high melting
point.
" P, S and Cl are elements of higher electronegativity and are non-metallic. These form
simple molecular substances (see bonding) with lower boiling points; the bonding between
atoms is covalent and the bonding between molecules is weak van der Waal s forces.
Period 3 oxides and chlorides
Period 3 Bonding in Electrical Acid/base Acid/base pH of
oxides and oxides and conductivityof properties of properties of chlorides in
chlorides chlorides molten oxides oxides chlorides water
and chlorides
s block Ionic solids with Ions present, e.g. Oxides form Chlorides
elements: high melting basic solutions (NaCl, MgCl2)
Na+ + Cl-
NaCl : pH =7
points; bonding form neutral
Na and Mg Na2O + H2O
Mg2+ + O2-;
between active solutions.
2NaOH;
conduct
metals of low IE MgCl2 is
MgCl2: pH <" 7
electricity in the
and active non- actually very
molten state (and
metals of high slightly acidic.
MgO + H2O
in aqueous sol)
electronegativity
Mg(OH)2
p block Al2O3 is ionic; No mobile ions Oxides are Chlorides are
elements SiO2 is a giant present; non- acidic except acidic;
Al, Si; covalent structure conductors Al2O3 which is undergo
(with very high amphoteric hydrolysis Al2Cl6: pH <" 3
melting point). (can act as an reaction to
SiCl4, PCl5,
P, S, Cl
acid or a base) produce HCl
Others: covalent
S2Cl2 : pH <" 2
vapor
bonding; form
simple molecular
substances
© IBID Press 2007 3
CHAPTER 3 PERIODICITY
(IB TOPICS 3 AND 13) SUMMARY
d-block elements
" d-block elements with characteristic properties form at least one ion with a partially filled
d sub-level (with 1 to 9 electrons); Sc and Zn are not typical of d-block elements.
" Characteristic properties are: presence of variable oxidation states, formation of complex
ions, colored complexes, and catalytic activity.
" 4s is lower in energy (but further from the nucleus) than 3d sub-level; 4s electrons are lost
before 3d; both 4s and 3d can behave as valence electrons because these are close in
energy.
" Multiple oxidation states are due to 4s and 3d being close in energy. All d-block elements
(except Sc) show an oxidation state of +2. All d-block elements except Zn show an
oxidation state of +3.
" Complexes are formed when a central metal ion is bonded to ligands; ligands contain (at
least one) lone e- pair that form coordinate bonds with the central transition metal ion.
" Color is due to d-d electron transitions between split d orbitals.
" Transition metals behave as surface catalysts and their compounds more often as
intermediate catalysts, which are important for industrial and biological reactions.
(N.B. Shading indicates Topic 13 (AHL) material.)
© IBID Press 2007 4
Wyszukiwarka
Podobne podstrony:
Ch 10 summaryCh 06 summaryCh 08 summaryCh 12 summaryCh 14 summarych 03Ch 05 summaryCh 15 summaryCh 09 summaryCh 07 summaryCh 02 summaryCh 17 summaryCh 04 summaryCh 11 summaryCh 18 summaryCh 01 summaryCh 16 summaryCh 13 summarywięcej podobnych podstron