SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
PETROL X
ALFA 166* 98 DIESEL
MAKE MOD. YEAR.
* Models with original equipment keyless entry system.
ALARM/SIREN Position the compact alarms and the sirens in the engine compartment, between
the ABS system and the headlamp, drivers side.
POSITION
CENTRAL UNIT POSITION Position the modular system and the modules under the sill cover, passengers
side. Alternatively under the dashboard, drivers side.
POWER SUPPLY +30: Connect to the 5 mm2 RED wire located in the general supply wiring of the
fuse box.
-31: Connect with a terminal directly to the car body.
IGNITION WIRE + 15/54: connect to the 0,5 mm2 LIGHT BLUE wire in the bundle of cables located
under the sill cover, drivers side.
DIRECTION INDICATORS Connect to the 1 mm2 LIGHT BLUE and LIGHT BLUE/BLACK wires located in the
bundle of cables under the sill cover, drivers side.
ELECTRIC WINDOWS Positive control signal
Front window, driver s side: cut the 1,5 mm2 LIGHT BLUE/RED wire.
Front window, passenger s side: cut the 1,5 mm2 GREY wire.
The wires are in the connector coming out of the green modular system of the
windows unit under the central tunnel. You will come in removing the left lateral
bulkhead, passengers side.
Rear window, driver s side: cut the 1,5 mm2 GREY/RED wire.
Rear window, passenger s side: cut the 1,5 mm2 BROWN wire.
The wires are in the connector coming out of the black modular system of the
windows unit behind the right lateral bulkhead of the boot, passengers side.
ALARM CONTROLS For trigger box art. 0144
Connect directly to the ends of the doors motor. The wires have a negative polarity
at rest.
IMMOBILISATION POINT 1 Fuel pump
Cut the 1,5 mm2 PINK/WHITE wire located in the bundle of cables under the left
sill cover, drivers side.
STARTER +50: Cut the BLACK wire located in the wiring harness that comes out of the 3
way black connector on the right of the steering column.
BONNET SWITCH Install an additional switch on the headlamp support plate, near the rubber trim of
the bonnet.
DOORS SWITCH Connect to the WHITE/BLACK wire located in the wiring harness that comes out
of the 10 way white connector behind the left lateral bulkhead, drivers side.
BOOT SWITCH Connect to the 1 mm2 VIOLET/WHITE wire located in the wiring harness coming
out of the 20 way white connector behind the right lateral bulkhead, passengers
side.
al16698gbbt.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
Wyszukiwarka
Podobne podstrony:
166 T S 1998 petrol NO166 2001 petrol YESserie 5 2001 petrol YESX3 2004 petrol YESA4 1998 diesel YES530 2004 petrol YESPT CRUISER 2001 petrol YESA3 1998 petrol NOwięcej podobnych podstron