Introduction to
Microprocessors
and
Microcontrollers
This Page Intentionally Left Blank
Introduction to
Microprocessors
and
Microcontrollers
Second edition
John Crisp
Newnes
An imprint of Elsevier
Linacre House, Jordan Hill, Oxford OX2 8DP
200 Wheeler Road, Burlington MA 01803
First published 1998 as Introduction to Microprocessors
Reprinted 2000, 2001
Second Edition 2004
� 1998, 2004, John Crisp. All rights reserved
The right of John Crisp to be identified as the author of this work
has been asserted in accordance with the Copyright, Designs and
Patents Act 1988
No part of this publication may be reproduced in any material form (including
photocopying or storing in any medium by electronic means and whether
or not transiently or incidentally to some other use of this publication) without
the written permission of the copyright holder except in accordance with the
provisions of the Copyright, Designs and Patents Act 1988 or under the terms of
a licence issued by the Copyright Licensing Agency Ltd, 90 Tottenham Court Road,
London, England W1T 4LP. Applications for the copyright holder s written
permission to reproduce any part of this publication should be addressed
to the publisher. Permissions may be sought directly from Elsevier s Science and
Technology Rights Department in Oxford, UK: phone: (+44) (0) 1865 843830;
fax: (+44) (0) 1865 853333; e-mail: permissions@elsevier.co.uk. You may also
complete your request on-line via the Elsevier Science homepage
(www.elsevier.com), by selecting  Customer Support and then
 Obtaining Permissions .
British Library Cataloguing in Publication Data
A catalogue record for this book is available from the British Library
ISBN 0 7506 5989 0
For information on all Newnes publications
visit our website at: www.newnespress.com
Composition by Genesis Typesetting Limited, Rochester, Kent
Printed and bound in Great Britain
Contents
Preface vii
1 Basic microprocessor systems 1
2 Binary  the way micros count 8
3 Hexadecimal  the way we communicate with micros 25
4 How micros calculate 38
5 An introduction to logic gates and their uses 49
6 Registers and memories 62
7 A microprocessor-based system 85
8 A typical 8-bit microprocessor 99
9 Programming  using machine code and assembly
language 121
10 High-level languages 132
11 The development of microprocessors and microcontrollers 151
12 The Pentium family 173
13 The PowerPC 184
14 The Athlon XP 194
15 Microcontrollers and how to use them 199
16 Using a PIC microcontroller for a real project 219
17 Interfacing 234
18 Test equipment and fault-finding 255
Appendix A: Special function register file 267
Appendix B: PIC 16CXXX instruction set 268
Further reading 271
Quiz time answers 273
Index 275
This Page Intentionally Left Blank
Preface
The first edition of this book started with the words:  A modern society
could no longer function without the microprocessor.
This is certainly still true but it is even truer if we include the
microcontroller. While the microprocessor is at the heart of our
computers, with a great deal of publicity, the microcontroller is quietly
running the rest of our world. They share our homes, our vehicles and
our workplace, and sing to us from our greetings cards.
They are our constant, unseen companions and billions are being
installed every year with little or no publicity.
The purpose of this book is to give a worry-free introduction to
microprocessors and microcontrollers. It starts at the beginning and
does not assume any previous knowledge of microprocessors or
microcontrollers and, in gentle steps, introduces the knowledge
necessary to take those vital first steps into the world of the micro.
John Crisp
This Page Intentionally Left Blank
1
Basic microprocessor
systems
The microprocessor was born
In 1971 two companies, both in the USA, introduced the world to its
future by producing microprocessors. They were a young company
called Intel and their rival, Texas Instruments.
The microprocessor and its offspring, the microcontroller, were
destined to infiltrate every country, every means of production, and
almost every home in the world. There is now hardly a person on the
planet that does not own or know of something that is dependent on
one of these devices. Yet curiously, so few people can give any sort of
answer to the simple question  What is a microprocessor? This, and
 How does it work? form two of the starting points for this book.
Let s start by looking at a system
The word  system is used to describe any organization or device that
includes three features.
A system must have at least one input, one output and must do
something, i.e. it must contain a process. Often there are many inputs
and outputs. Some of the outputs are required and some are waste
products. To a greater or lesser extent, all processes generate some
waste heat. Figure 1.1 shows these requirements.
1
Introduction to Microprocessors and Microcontrollers
Figure 1.1
The essential
requirements of
a system
A wide range of different devices meets these simple requirements. For
example, a motor car will usually require fuel, water for cooling
purposes and a battery to start the engine and provide for the lights and
instruments. Its process it to burn the fuel and extract the energy to
provide transportation for people and goods. The outputs are the
wanted movement and the unwanted pollutants such as gases, heat,
water vapour and noise.
The motor car contains other systems within it. In Figure 1.2, we added
electricity as a required input to start the engine and provide the lights
Figure 1.2
An everyday
system
Figure 1.3
Recharging the
battery
2
Basic microprocessor systems
and the instruments but thereafter the battery is recharged by the
engine. There must, then, be an electrical system at work, as in Figure
1.3, so it is quite possible for systems to have smaller systems inside or
embedded within them. In a similar way, a motor car is just a part of
the transport system.
A microprocessor system
Like any other system, a microprocessor has inputs, outputs and a
process as shown in Figure 1.4. The inputs and outputs of a
microprocessor are a series of voltages that can be used to control
external devices. The process involves analysing the input voltages
and using them to  decide on the required output voltages. The
decision is based on previously entered instructions that are followed
quite blindly, sensible or not.
Figure 1.4
The microprocessor
system
His and hers garage door opener
Here is a little task that a simple microprocessor can solve for us.
When the woman arrives in her car, a light signal is flashed at the
sensor and only her garage door opens. When the man arrives home,
his car flashes a light signal at the same sensor but this time his garage
door opens but hers remains closed.
The cars are sending a different sequence of light flashes to the light
sensor. The light sensor converts the incoming light to electrical
voltage pulses that are recognized by the microprocessor. The output
voltage now operates the electrical motor attached to the appropriate
door. The overall scheme is shown in Figure 1.5.
In the unlikely event of it being needed, a modern microprocessor
would find it an easy task to increase the number of cars and garages
to include every car and every garage that has ever been manu-
factured. Connecting all the wires, however, would be an altogether
different problem!
3
Introduction to Microprocessors and Microcontrollers
Figure 1.5
Opening the right
garage door
The physical appearance of a microprocessor
1
A microprocessor is a very small electronic circuit typically D 2 inch
(12 mm) across. It is easily damaged by moisture or abrasion so to offer
it some protection it is encapsulated in plastic or ceramic. To provide
electrical connections directly to the circuit would be impractical
owing to the size and consequent fragility, so connecting pins are
moulded into the case and the microprocessor then plugs into a socket
Figure 1.6
Typical
microprocessors
4
Basic microprocessor systems
on the main circuit board. The size, shape and number of pins on the
microprocessor depend on the amount of data that it is designed to
handle. The trend, as in many fields, is forever upward. Typical
microprocessors are shown in Figure 1.6.
Terminology
Integrated circuits
An electronic circuit fabricated out of a solid block of semiconductor
material. This design of circuit, often called a solid state circuit, allows
for very complex circuits to be constructed in a small volume. An
integrated circuit is also called a  chip .
Microprocessor ( p)
This is the device that you buy: just an integrated circuit as in Figure 1.6.
On its own, without a surrounding circuit and applied voltages it is quite
useless. It will just lie on your workbench staring back at you.
Microprocessor-based system
This is any system that contains a microprocessor, and does not
necessarily have anything to do with computing. In fact, despite all the
hype, computers use only a small proportion of all the micro-
processors manufactured. Our garage door opening system is a
microprocessor-based system or is sometimes called a microprocessor-
controlled system.
Microcomputer
The particular microprocessor-based systems that happen to be used
as a computer are called microcomputers. The additional circuits
required for a computer can be built into the same integrated circuit
giving rise to a single chip microcomputer.
Microcontroller
This is a complete microprocessor-based control system built onto a
single chip. It is small and convenient but doesn t do anything that
could not be done with a microprocessor and a few additional
components. We ll have a detailed look at these in a later chapter.
MPU and CPU
An MPU is a MicroProcessor Unit or microprocessor. A CPU is a
Central Processing Unit. This is the central  brain of a computer and
5
Introduction to Microprocessors and Microcontrollers
can be (usually is) made from one or more microprocessors. The IBM
design for the  Blue Gene supercomputer includes a million
processors!
Remember:
MPU is the thing
CPU is the job.
Micro
The word micro is used in electronics and in science generally, to
mean  one-millionth or 1 10 6. It has also entered general language
to mean something very small like a very small processor or
microprocessor. It has also become an abbreviation for micro-
processor, microcomputer, microprocessor-based system or a micro
controller  indeed almost anything that has  micro in its name. In the
scientific sense, the word micro is represented by the Greek letter
(mu). It was only a small step for microprocessor to become
abbreviated to P.
Some confusion can arise unless we make sure that everyone
concerned is referring to the same thing.
Quiz time 1
In each case, choose the best option.
1 A microprocessor:
(a) requires fuel, water and electricity.
(b) is abbreviated to c.
(c) is often encapsulated in plastic.
(d) is never used in a CPU but can be used in an MPU.
2 A system must include:
(a) an input, an output and a process.
(b) something to do with a form of transport.
(c) a microprocessor.
(d) fuel, water and electricity.
3 All systems generate:
(a) movement.
(b) chips.
(c) waste heat.
(d) waste gases.
6
Basic microprocessor systems
4 An MPU:
(a) is the same as a P.
(b) can be made from more than one Central Processing Unit.
(c) is a small, single chip computer.
(d) is an abbreviation for Main Processing Unit.
5 Integrated circuits are not:
(a) called chips.
(b) used to construct a microprocessor-based system.
(c) solid state circuits.
(d) an essential part of an engine.
7
2
Binary  the way micros
count
Unlike us, microprocessors have not grown up with the idea that 10 is
a convenient number of digits to use. We have taken it so much for
granted that we have even used the word digit to mean both a finger
and a number.
Microprocessors and other digital circuits use only two digits  0 and
1  but why? Ideally, we would like our microprocessors to do
everything at infinite speed and never make a mistake. Error free or
high speed  which would you feel is the more important?
It s your choice but I would go for error free every time, particularly
when driving my car with its engine management computer or when
coming in to land in a fly-by-wire aircraft. I think most people would
agree.
So let s start by having a look at one effect of persuading micro-
processors to count in our way.
The noise problem
If the input of a microprocessor is held at a constant voltage, say 4 V,
this would appear as in Figure 2.1.
If we try to do this in practice, then careful measurements would show
that the voltage is not of constant value but is continuously wandering
8
Binary  the way micros count
Figure 2.1
A constant voltage
above and below the mean level. These random fluctuations are called
electrical noise and degrade the performance of every electronic
circuit. We can take steps to reduce the effects but preventing it
altogether is, so far, totally impossible. We can see the effect by
disconnecting the antenna of our television. The noise causes random
speckles on the screen which we call snow. The same effect causes an
audible hiss from the loudspeaker. The effect of noise is shown in
Figure 2.2.
Figure 2.2
A  noisy voltage
Most microprocessors use a power supply of 5 V or 3.3 V. To keep the
arithmetic easy, we will assume a 5 V system.
If we are going to persuade the microprocessor to count from 0 to 9,
as we do, using voltages available on a 5 V supply would give 0.5 V
per digit:
0 = 0 V
1 = 0.5 V
2 = 1 V
3 = 1.5 V
4 = 2 V
5 = 2.5 V
6 = 3 V
7 = 3.5 V
8 = 4 V
9 = 4.5 V
9
Introduction to Microprocessors and Microcontrollers
If we were to instruct our microprocessor to perform the task 4 + 4
= 8, by pressing the  4 key we could generate a 2 V signal which is
then remembered by the microprocessor. The + key would tell it to
add and pressing the  4 key again would then generate another 2 V
signal.
So, inside the microprocessor we would see it add the 2 V and then
another 2 V and, hence, get a total of 4 V. The microprocessor could
then use the list shown to convert the total voltage to the required
numerical result of 8. This simple addition is shown in Figure 2.3.
This seemed to work nicely  but we ignored the effect of noise. Figure
2.4 shows what could happen. The exact voltage memorized by the
microprocessor would be a matter of chance. The first time we pressed
Figure 2.3
It works! 4 + 4
does equal 8
Figure 2.4
Noise can cause
problems
10
Binary  the way micros count
key 4, the voltage just happened to be at 1.5 V but the second time we
were luckier and the voltage was at the correct value of 2 V.
Inside the microprocessor:
1.5 V + 2 V = 3.5 V
and using the table, the 3.5 V is then converted to the number 7. So our
microprocessor reckons that 4 + 4 = 7.5!
Since the noise is random, it is possible, of course, to get a final result
that is too low, too high or even correct.
A complete cure for electrical noise
Sorry, just dreaming. There isn t one. The small particle-like compo-
nents of electricity, called electrons, vibrate in a random fashion
powered by the surrounding heat energy. In conductors, electrons are
very mobile and carry a type of electrical charge that we have termed
negative. The resulting negative charge is balanced out by an equal
number of fixed particles called protons, which carry a positive charge
(see Figure 2.5).
The overall effect of the electron mobility is similar to the random
surges that occur in a large crowd of people jostling around waiting to
enter the stadium for the Big Match. If, at a particular time, there
happens to be more electrons or negative charges moving towards the
Figure 2.5
Equal charges result in
no overall voltage
11
Introduction to Microprocessors and Microcontrollers
Figure 2.6
A random voltage has
been generated
left-hand end of a piece of material then that end would become more
negative, as shown in Figure 2.6. A moment later, the opposite result
may occur and the end would become more positive (Figure 2.7).
These effects give rise to small random voltages in any conductor, as
we have seen.
Figure 2.7
The opposite effect is
equally likely
12
Binary  the way micros count
Thermal noise
The higher the temperature, the more mobile the electrons, the greater
the random voltages and the more electrical noise is present.
A solution:
High temperature = high noise
so:
Low temperature = low noise.
Put the whole system into a very cold environment by dropping it in
liquid nitrogen (about  200�C) or taking it into space where the
 shade temperature is about  269�C. The cold of space has created
very pleasant low noise conditions for the circuits in space like the
Hubble telescope. On Earth most microprocessors operate at room
temperature. It would be inconvenient, not to mention expensive, to
surround all our microprocessor circuits by liquid nitrogen. And even
if we did, there is another problem queuing up to take its place.
Partition noise
Let s return to the Big Match. Two doors finally open and the fans pour
through the turnstiles. Now we may expect an equal number of people
to pass through the two entrances as shown in Figure 2.8 but in reality
this will not happen. Someone will have trouble finding their ticket;
friends will wait for each other; cash will be offered instead of a ticket;
someone will try to get back out through the gate to reach another
section of the stadium. As we can imagine, the streams of people may
be equal over an hour but second by second random fluctuations will
occur.
Electrons don t lose their tickets but random effects like temperature,
voltage and interactions between adjacent electrons have a very
similar effect.
Figure 2.8
The fans enter
the stadium
13
Introduction to Microprocessors and Microcontrollers
A single current of, say, 1 A can be split into two currents of 0.5 A when
measured over the long-term, but when examined carefully, each will
contain random fluctuations. This type of electrical noise is called
partition noise or partition effect. The overall effect is similar to the
thermal noise and, between them, would cause too much noise and
hence would rule out the use of a 10-digit system.
How much noise can we put up with?
The 10-finger system that we use is called a  denary or  decimal
system. We have seen that a 5 V supply would accommodate a
10-digit counting system if each digit was separated by 0.5 V or, using
the more modern choice of 3.3 V, the digits would be separated by
only 0.33 V.
Question: Using a 5 V supply and a denary system, what is the highest
noise voltage that can be tolerated?
Answer: Each digit is separated by only 5 V/10 = 0.5 V.
The number 6 for example would have a value of 3 V and the number
7 would be represented by 3.5 V. If the noise voltage were to increase
the 3 V to over 3.25 V, the number is likely to be misread as 7. The
highest acceptable noise level would therefore be 0.25 V. This is not
very high and errors would be common. If we used a supply voltage of
3.3 V, the situation would get even worse.
So why don t we just increase the operating voltage to say, 10 V, or
100 V? The higher the supply voltage the less likely it is that electrical
noise would be a problem. This is true but the effect of increasing the
supply would be to require thicker insulation and would increase the
physical size of the microprocessor and reduce its speed. More about
this in Chapter 11.
Using just two digits
If we reduce the number of digits then a wider voltage range can be
used for each value and the errors due to noise are likely to occur less
often.
We have chosen to use only two digits, 0 and 1, to provide the
maximum degree of reliability. A further improvement is to provide a
safety zone between each voltage. Instead of taking our supply voltage
of 3.3 V and simply using the lower half to represent the digit 0 and the
top half for 1, we allocate only the lower third to 0 and the upper third
to 1 as shown in Figure 2.9. This means that the noise level will have
to be at least 1.1 V (one-third of 3.3 V) to push a level 0 digit up to the
minimum value for a level 1.
14
Binary  the way micros count
Figure 2.9
A better choice of
voltages
How do we count?
Normally, we count in the system we call  denary . We start with 0
then go to 1 then to a new symbol that we write as 2 and call  two .
This continues until we run out of symbols. So far, it looks like this:
0
1
2
3
4
5
6
7
8
9
At this point we have used all the symbols once and, to show this, we
put a  1 to the left of the numbers as we re-use them. This gives us:
10
11
12
13
14
. . . and so on up to 19 when we put a 2 on the left-hand side and start
again 20, 21, 22 etc.
When we reach 99, we again add a  1 on the left-hand side and put
the other digits back to zero to give 100. After we reach 999, we go to
1000 and so on.
Counting is not easy. We often take it for granted but if we think back
to our early days at school, it took the teacher over a year before we
were happy and reasonably competent. So counting is more difficult
than microprocessors  you ve mastered the difficult part already!
15
Introduction to Microprocessors and Microcontrollers
The basic basis of bases
The base of a number system is the number of different symbols used
in it. In the case of the denary system, we use 10 different symbols, 0
. . . 9, other numbers, like 28 657, are simply combinations of the 10
basic symbols.
Since the denary system uses 10 digits, the system is said to have a
base of 10. The base is therefore just the technical word for the number
of digits used in any counting system.
Counting with only two figures
We can count using any base that we like. In the denary or decimal
system, we used a base of 10 but we have seen that microprocessors
use a base of 2  just the two digits 0 and 1. This is called the binary
system.
We usually abbreviate the words BInary digiT to bit.
Counting follows the same pattern as we have seen in the denary
system: we use up the digits then start again.
Let s give it a try. Start by listing all the digits:
0
1
and that s it!
We now put a  1 in the next column and start again:
10
11
It is convenient at this stage to keep the number of binary columns
the same and so we add a 0 at the start of the first two digits. These
extra zeros do not alter the value at all. For example, the denary
number 25 is not affected by writing it as 025 or 0025 or even
000 000 000 000 025.
The binary and decimal equivalents are:
Binary Denary
00 0
01 1
10 2
11 3
16
Binary  the way micros count
We do the same again  put a  1 in the next column and repeat the
pattern to give:
Binary Denary
100 4
101 5
110 6
111 7
and once more:
Binary Denary
1000 8
1001 9
1010 10
1011 11
Confusion and the cure
Here is a number: 1000. But what number is it? Is it a thousand in
denary or is it eight written in binary?
I don t know. I could take a guess but the difference between flying an
aircraft at eight feet and a thousand feet is a serious matter. The only
way to be certain is to say so at the time. This is done by showing the
base of the number system being used to make the meaning quite
clear. The base of the number system is shown as a subscript after the
number.
If the 1000 were a binary number, it is written as 10002 and if it were
a denary number it would be shown as 100010.
It would be easy to advise that the base of the number system in use
is always shown against every number but this would be totally
unrealistic. No one is going to write a base after their telephone
number or a price in a shop. Use a base when it would be useful to
avoid confusion, such as by writing statements like 1000 = 8 (a
thousand = eight???). Write it as 10002 = 810 and make life a little
easier.
Converting denary to binary
Of course, if someone were to ask us for the binary equivalent of nine
we could just start from zero and count up until we reach nine. This is
a boring way to do it and with larger numbers like 1 000 00010 it would
be very tedious indeed. Here is a better way. The method will be
explained using the conversion of 5210 to binary as an example.
17
Introduction to Microprocessors and Microcontrollers
A worked example
Convert 5210 to binary
Step 1: Write down the number to be converted
52
Step 2: Divide it by 2 (because 2 is the base of the binary system), write the
whole number part of the answer underneath and the remainder 0 or 1
alongside
52
26 0
Step 3: Divide the answer (26) by 2 and record the remainder (0) as before
52
26 0
13 0
Step 4: Divide the 13 by 2 and write down the answer (6) and the remainder (1)
52
26 0
13 0
6 1
Step 5: 2 into 6 goes 3 remainder 0
52
26 0
13 0
6 1
3 0
Step 6: Dividing 3 gives an answer of 1 and a remainder of 1
52
26 0
13 0
6 1
3 0
1 1
Step 7: Finally, dividing the 1 by 2 will give 0 and a remainder of 1
52
26 0
13 0
6 1
3 0
1 1
0 1
18
Binary  the way micros count
Step 8: We cannot go any further with the divisions because all the answers will
be zero from now on. The binary number now appears in the remainder
column. To get the answer read the remainder column from the bottom
UPWARDS
52
26 0 = 1101002
13 0 ę!
6 1 ćł
3 0 ćł
1 1
0 1
Method
1 Divide the denary number by 2  write the whole number result underneath
and the remainder in a column to the right.
2 Repeat the process until the number is reduced to zero.
3 The binary number is found by reading the remainder column from the
bottom upwards.
Another example
Here is one for you to try. If you get stuck, the solution is given below.
Convert 218710 to a binary number
2187
1093 1 = 1000100010112
546 1 ę!
273 0 ćł
136 1 ćł
68 0 ćł
34 0 ćł
17 0
8 1
4 0
2 0
1 0
0 1
Doing it by calculator: Many scientific calculators can do the conver-
sion of denary to binary for us. Unfortunately, they are limited to quite
low numbers by the number of digits able to be seen on the screen.
To do a conversion, we need:
1 A scientific calculator that can handle different number bases.
2 The instruction booklet.
19
Introduction to Microprocessors and Microcontrollers
3 About half an hour to spare  or a week if you have lost the
instructions.
The exact method varies but on my elderly Casio it goes something
like this:
To tell the calculator that the answer has to be in binary I have to
press mode mode 3 then the  binary key.
It now has to be told that the input number is decimal. This is the
exciting key sequence logic logic logic 1 now just put in our number
52 and press the = key and out will pop the answer 110100.
Converting binary to denary
If we look at a denary number like 8328, we see that it contains
two eights. Now these two figures look identical however closely
we examine them, but we know that they are different. The 8 on the
right-hand end is really 8 but the other one is actually 8000 because
it is in the thousands column.
The real value of a digit is dependent on two things: the digit used and
the column in which it is placed.
In the denary system, the columns, starting from the right, are units, tens,
hundreds, thousands etc. Rather than use these words, we could express
them in powers of ten. A thousand is 10 10 10 = 103 and in a similar
way, a hundred is 102, ten is 101 and a unit is 100. Each column simply
increases the power applied to the base of the number system.
Columns in a binary world also use the base raised to increasing
powers as we move across the columns towards the left.
So we have:
23 22 21 20
The denary equivalent can be found by multiplying out the powers of
two. So 23 is 2 2 2 = 8 and 22 = 4, 21 = 2 and finally 20 = 1. Starting
from the right-hand side, the column values would be 1, 2, 4, 8 etc. Let s
use this to convert the binary number 1001 into denary.
Method
Step 1: Write down the values of the columns
8 4 2 1
Step 2: Write the binary number underneath
8 4 2 1
1 0 0 1
20
Binary  the way micros count
Step 3: Evaluate the values of the columns
8 1 = 8
4 0 = 0
2 0 = 0
1 1 = 1
Step 4: Add up the values
8 + 1 = 9
As we have seen, all the columns containing a binary 0 can be ignored
because they always come out to 0 so a quicker way is to simply add
up all the column values where the binary digit is 1.
Method
1 Write down the column values for the binary system using the same number
of columns as are shown in the binary number.
2 Enter the binary number, one bit under each column heading.
3 Add the values of each column where a 1 appears in the binary number.
Calculator note: This is much the same as we saw the previous conversion.
To tell the calculator that the answer has to be in decimal I have to press
mode mode 3 then the  decimal key.
It now has to be told that the input number is binary. This is done by the key
sequence logic logic logic 3 now just put in our binary number 1001 and
press the = key and out will pop the answer 9.
Another example
Once again, here is one for you to try. If you have problems, the
answer follows.
Convert 1011001012 to a denary number
Step 1: Write down the column values by starting with a 1 on the right-hand side
then just keep doubling as necessary
28 27 26 25 24 23 22 21 20
256 128 64 32 16 8 4 2 1
Step 2: Enter the binary number under the column headings
256 128 64 32 16 8 4 2 1
1 0 1 1 0 0 1 0 1
Step 3: Add up all the column values where the binary digit is 1
256 + 64 + 32 + 4 + 1 = 357
So, 1011001012 = 35710 or just 357 since denary can be assumed in
this case.
21
Introduction to Microprocessors and Microcontrollers
Bits, bytes and other things
All the information entering or leaving a microprocessor is in the form of
a binary signal, a voltage switching between the two bit levels 0 and 1.
Bits are passed through the microprocessor at very high speed and in
large numbers and we find it easier to group them together.
Nibble
A group of four bits handled as a single lump. It is half a byte.
Byte
A byte is simply a collection of 8 bits. Whether they are ones or zeros
or what their purpose is does not matter.
Word
A number of bits can be collected together to form a  word . Unlike a
byte, a word does not have a fixed number of bits in it. The length of
the word or the number of bits in the word depends on the
microprocessor being used.
If the microprocessor accepts binary data in groups of 32 at a time then
the word in this context would include 32 bits. If a different
microprocessor used data in smaller handfuls, say 16 at a time, then
the word would have a value of 16 bits. The word is unusual in this
context in as much as its size or length will vary according to the
situations in which it is discussed. The most likely values are 8, 16, 32
and 64 bits but no value is excluded.
Long word
In some microprocessors where a word is taken to mean say 16 bits,
a long word would mean a group of twice the normal length, in this
case 32 bits.
Kilobyte (Kb or KB or kbyte)
A kilobyte is 1024 or 210 bytes. In normal use, kilo means 1000 so a
kilovolt or kV is exactly 1000 volts. In the binary system, the nearest
column value to 1000 is 1024 since 29 = 512 and 210 = 1024.
The difference between 1000 and 1024 is fairly slight when we have
only 1 or 2 Kb and the difference is easily ignored. However, as the
numbers increase, so does the difference. The actual number of bytes
in 42 Kb is actually 43 008 bytes (42 1024).
The move in the computing world to use an upper case K to mean 1024
rather than k for meaning 1000 is trying to address this problem.
22
Binary  the way micros count
Unfortunately, even the upper or lower case b is not standardized so
tread warily and look for clues to discover which value is being used. If
in doubt use 1024 if it is to do with microprocessors or computers.
Bits often help to confuse the situation even further. 1000 bits is a
kilobit or kb. Sometimes 1024 bits is a Kb. One way to solve the bit/
byte problem is to use kbit (or Kbit) and kbyte (or Kbyte).
Megabyte (MB or Mb)
This is a kilokilobyte or 1024 1024 bytes. Numerically this is 220 or
1 048 576 bytes. Be careful not to confuse this with mega as in
megavolts (MV) which is exactly one million (106).
Gigabyte (Gb)
This is 1024 megabytes which is 230 or 1 073 741 824 bytes. In general
engineering, giga means one thousand million (109).
Terabyte (TB or Tb)
Terabyte is a megamegabyte or 240 or 1 099 511 600 000 bytes (Tera =
1012).
Petabyte (PB or Pb)
This is a thousand (or 1024) times larger than the Terabyte so it is 1015
in round numbers or 240 which is pretty big. If you are really
interested, you can multiply it out yourself by multiplying the TB figure
by 1024.
Quiz time 2
In each case, choose the best option.
1 Typical operating voltages of microprocessors are:
(a) 0 V and 1 V.
(b) 3.3 V and 5 V.
(c) 220 V
(d) 1024 V.
2 The most mobile electrical charge is called:
(a) a proton and has a positive charge.
(b) a voltage and is always at one end of a conductor.
(c) an electron and has a negative charge.
(d) an electron and has a positive charge.
23
Introduction to Microprocessors and Microcontrollers
3 The denary number 600 is equivalent to the binary
number:
(a) 1001011000.
(b) 011000000000.
(c) 1101001.
(d) 1010110000.
4 When converted to a denary number, the binary
number 110101110:
(a) will end with a 0.
(b) must be greater than 256 but less than 512.
(c) will have a base of 2.
(d) will equal 656.
5 A byte:
(a) is either 1024 or 1000 bits.
(b) is simply a collection of 16 bits.
(c) can vary in length according to the microprocessor used.
(d) can have the same number of bits as a word.
24
3
Hexadecimal  the way
we communicate with
micros
The only problem with binary
The only problem with binary is that we find it so difficult and make
too many errors. There is little point in designing microprocessors to
handle binary numbers at high speed and with almost 100% accuracy
if we are going to make loads of mistakes putting the numbers in and
reading the answers.
From our point of view, binary has two drawbacks: the numbers are
too long and secondly they are too tedious. If we have streams and
streams of ones and zeros we get bored, we lose our place and do
sections twice and miss bits out.
The speed of light in m/s can be written in denary as 29979245910 or
in binary as 100011101111001111000010010112. Try writing these
numbers on a sheet of paper and we can be sure that the denary
number will be found infinitely easier to handle. Incidentally, this
binary number is less than half the length that a modern micro-
processor can handle several millions of times a second with (almost)
total accuracy.
25
Introduction to Microprocessors and Microcontrollers
In trying to make a denary number even easier, we tend to split it up
into groups and would write or read it as 299 792 459. In this way, we
are dealing with bite-sized portions and the 10 different digits ensure
that there is enough variety to keep us interested.
We can perform a similar trick with binary and split the number into
groups of four bits starting from the right-hand end as we do with
denary numbers.
1 0001 1101 1110 0111 1000 0100 1011
Already it looks more digestible.
Now, if we take a group of four bits, the lowest possible value is 00002
and the highest is 11112. If these binary numbers are converted to
denary, the possibilities range from 0 to 15.
Hexadecimal, or  hex to its friends
Counting from 0 to 15 will mean 16 different digits and so has a base
of 16. What the digits look like really doesn t matter. Nevertheless, we
may as well make it as simple as possible.
The first 10 are easy, we can just use 0123456789 as in denary. For the
last six we have decided to use the first six letters of the alphabet:
ABCDEF or abcdef.
The hex system starts as:
Hex Denary
00
11
22
33
44
55
66
77
88
99
A 10
B 11
C 12
D 13
E 14
F 15
When we run out of digits, we just put a 1 in the second column and
reset the first column to zero just as we always do.
26
Hexadecimal  the way we communicate with micros
So the count will continue:
10 16
11 17
12 18
13 19
14 20
15 21
16 22
17 23
18 24
19 25
1A 26
1B 27
1C 28
1D 29
1E 30
1F 31
20 32
. . . and so on.
It takes a moment or two to get used to the idea of having numbers that
include letters but it soon passes. We must be careful to include the
base whenever necessary to avoid confusion. The base is usually
written as H, though h or 16 would still be acceptable.
 One eight in hex is equal to twenty-four in denary. Notice how I
avoided quoting the hex number as eighteen. Eighteen is a denary
number and does not exist in hex. If you read it in this manner it
reinforces the fact that it is not a denary value.
Here are the main options in order of popularity:
16H = 2410
16H = 2410
16h = 2410
16h = 2410
1616 = 2410
The advantages of hex
1 It is very compact. Using a base of 16 means that the number of
digits used to represent a given number is usually fewer than in
binary or denary.
2 It is easy to convert between hex and binary and fairly easy to go
between hex and denary. Remember that the microprocessor only
works in binary, all the conversions between hex and binary are
carried out in other circuits (Figure 3.1).
27
Introduction to Microprocessors and Microcontrollers
Figure 3.1
Hex is a good
compromise
Converting denary to hex
The process follows the same pattern as we saw in the denary to binary
conversion.
Method
1 Write down the denary number.
2 Divide it by 1610, put the whole number part of the answer underneath and
the remainder in the column to the right.
3 Keep going until the number being divided reaches zero.
4 Read the answer from the bottom to top of the remainders column.
REMEMBER TO WRITE THE REMAINDERS IN HEX.
A worked example
Convert the denary number 23 823 to hex
1 Write down the number to be converted
23 823
(OK so far).
2 Divide by 16. You will need a calculator. The answer is 1488.9375.
The 1488 can be placed under the number being converted
23 823
1488
28
Hexadecimal  the way we communicate with micros
but there is the problem of the decimal part. It is 0.9375 and this is
actually 0.9375 of 16. Multiply 0.9375 by 16 and the result is 15.
Remember that this 15 needs to be written as a hex number  in this
case F. When completed, this step looks like:
23 823
1488 F
3 Repeat the process by dividing the 1488 by 16 to give 93.0 There is
no remainder so we can just enter the result as 93 with a zero in the
remainder column.
23 823
1488 F
93 0
4 And once again, 93 divided by 16 is 5.8125. We enter the 5 under
the 93 and then multiply the 0.8125 by 16 to give 13 or D in hex
23 823
1488 F
93 0
5 D
5 This one is easy. Divide the 5 by 16 to get 0.3125. The answer has
now reached zero and 0.3125 16 = 5. Enter the values in the
normal columns to give:
23 823
1488 F = 5D0F
93
0
ę!
ćł
5
D
0
5
6 Read the hex number from the bottom upwards: 5D0FH (remember
that the  H just means a hex number).
Example
Convert 44 25610 into hex
44 256
2766 0 = ACE0H
172 E
ę!
ćł
10 C
0 A
29
Introduction to Microprocessors and Microcontrollers
A further example
Convert 540 70910 to hex
540 709
33 794 5 = 84025H
2112 2
ę!
ćł
132 0
8 4
0 8
So 540 70910 = 84025H but, especially when the hex number does not
contain any letters, be careful to include the base of the numbers
otherwise life can become really confusing.
Converting hex to denary
To do this, we can use a similar method to the one we used to change
binary to denary.
Example
Convert A40E5H to denary
1 Each column increases by 16 times as we move towards the right-
hand side so the column values are:
164 163 162 161 160
65536 4096 256 16 1
2 Simply enter the hex number using the columns
65536 4096 256 16 1
A 4 0 E 5
3 Use your calculator to find the denary value of each column
65536 4096 256 16 1
A 4 0 E 5
655360 16384 0 224 5
The left-hand column has a hex value of 1010 (A = 10) so the
column value is 65536 10 = 655360. The next column is 4
4096 = 16384. The next column value is zero (256 0). The fourth
column has a total value of 16 14 = 224 (E = 14). The last column
is easy. It is just 1 5 = 5 no calculator needed!
4 Add up all the denary values:
655 360 + 16 384 + 0 + 224 + 5 = 671 97310
30
Hexadecimal  the way we communicate with micros
Method
1 Write down the column values using a calculator. Starting on with 160 (=1)
on the right-hand side and increasing by 16 times in each column towards
the left.
2 Enter the hex numbers in the appropriate column, converting them into
denary numbers as necessary. This means, for example, that we should write
10 to replace an  A in the original number.
3 Multiply these denary numbers by the number at the column header to
provide a column total.
4 Add all the column totals to obtain the denary equivalent.
Another example
Convert 4BF0H to denary
163 162 161 160 column values
4096 256 16 1 column values
4 11 15 0 hex values
16 384 2816 240 0 denary column totals
Total = 16 384 + 2816 + 240 + 0 = 19 44010
Converting binary to hex
This is very easy. Four binary bits can have minimum and maximum
values of 00002 up to 11112. Converting this into denary by putting in
the column headers of: 8, 4, 2 and 1 results in a minimum value of 0
and a maximum value of 1510. Doesn t this fit into hex perfectly!
This means that any group of four bits can be translated directly into a
single hex digit. Just put 8, 4, 2 and 1 over the group of bits and add
up the values wherever a 1 appears in the binary group.
Example
Convert 1000000101010112 to hex
Step 1 Starting from the right-hand end, chop the binary number into groups of
four.
100/ 0000/ 1010/ 1011/
Step 2 Treat each group of four bits as a separate entity. The right-hand group is
1011 so this will convert to:
8 4 2 1 column headers
1 0 1 1 binary number
8 0 2 1 column values
31
Introduction to Microprocessors and Microcontrollers
The total will then be 8 + 0 + 2 + 1 = 1110 or in hex, B.
The right-hand side binary group can now be replaced by the hex
value B.
100/ 0000/ 1010/ 1011/
B
Step 3 The second group can be treated in the same manner. The bits are 1010
and by comparing them with the 8, 4, 2, 1 header values this means the
total value is (8 1) + (4 0) + (2 1) + (1 1) = 8 + 0 + 2 + 0 =
1010 or in hex, A.
We have now completed two of the groups.
100/ 0000/ 1010/ 1011/
A B
Step 4 The next group consists of all zeros so we can go straight to an answer
of zero. The result so far will be:
100/ 0000/ 1010/ 1011/
0 A B
Step 5 The last group is incomplete so only the column headings of 4, 2, and 1
are used. In this case, the 4 is counted but the 2 and the 1 are ignored
because of the zeros. This gives a final result of:
100/ 0000/ 1010/ 1011/
4 0 A B
So, 1000000101010112 = 40ABH.
Having chopped up the binary number into groups of four the process
is the same regardless of the length of the number. Always remember
to start chopping from the right-hand side.
Example
Convert the number 11000111110012 to hex
Split it into groups of four starting from the right-hand side
1/ 1000/ 1111/ 1001/
Add column headers of 8 4 2 1 to each group
1 8421 8421 8421 column headings
1/ 1000/ 1111/ 1001 binary number
1 8 8421 81 column values
1 8 15 9 group value in denary
Now just convert group values to hex as necessary. In this example
only the second group 15, will need changing to F.
Final result is 11000111110012 = 18F9H.
32
Hexadecimal  the way we communicate with micros
Converting hex to binary
This is just the reverse of the last process. Simply take each hex
number and express it as a four bit binary number.
As we saw in the last section, a four-bit number has column header
values of 8, 4, 2 and 1, so conversion is just a matter of using these
values to build up the required value. All columns used are given a
value of 1 in binary and all unused columns are left as zero.
When you are converting small numbers like 3H we must remember
to add zeros on the left-hand side to make sure that each hex digit
becomes a group of four bits.
Imagine that we would like to convert 5H to binary. Looking at the
column header values of 8, 4, 2 and 1, how can we make the value 5?
The answer is to add a 4 and a 1. Taking each column in turn: we do
not need to use an 8 so the first column is a 0. We do want a 4 so this
is selected by putting a 1 in this column, no 2 so make this 0 and
finally put a 1 in the last column to select the value of 1. The 5H is
converted to 01012. All values between 0 and FH are converted in a
similar way.
Example
Convert 2F6CH to binary
Step 1 Write the whole hex number out with enough space to be able to put the
binary figures underneath
2 F 6 C
Step 2 Put the column header values below each hex digit
2 F 6 C
8421 8421 8421 8421
Step 3 The hex C is 1210 that can be made of 8 + 4 so we put a binary 1 in the
8 and the 4 columns. The four-bit number is now 11002
2 F 6 C
8421 8421 8421 8421
1100
Step 4 Now do the same for the next column. The hex number is 6, which is
made of 4 + 2, which are the middle two columns. This will result in the
binary group 01102
2 F 6 C
8421 8421 8421 8421
0110 1100
33
Introduction to Microprocessors and Microcontrollers
Step 5 Since 8 + 4 + 2 + 1 = 15, the hex F will become 11112
2 F 6 C
8421 8421 8421 8421
1111 0110 1100
Step 6 Finally, the last digit is 2 and since this corresponds to the value of the
second column it will be written as 00102
2 F 6 C
8421 8421 8421 8421
0010 1111 0110 1100
The final result is 2F6CH = 00101111011011002.
But do we include the two leading zeros? There are two answers,  yes
and  no but that s not very helpful. We need to ask another question:
why did we do the conversion? were we doing math or micro-
processors? If we were working on a microprocessor system then the
resulting 16 bits would represent 16 voltages being carried on 16
wires. As the numbers change, all the wires must be able to switch
between 0 V and 3.3 V for binary levels 0 and 1. This means, of course,
that all 16 wires must present so we should include the binary levels
on all of them.
If the conversion was purely mathematical, then since leading (left-
hand end) zeros have no mathematical value there is no point in
including them in the answer.
Method
1 Write down the hex number but make it well spaced.
2 Using the column header values of 8, 4, 2 and 1, convert each hex number
to a four bit binary number.
3 Add leading zeros to ensure that every hex digit is represented by four
bits.
Example
Convert 1E08BH to binary
Step 1
1 E 0 8 B
8421 8421 8421 8421 8421
Step 2
0001 1110 0000 1000 1011
So, 1E08BH = 000111100000100010112.
34
Hexadecimal  the way we communicate with micros
Using stepping stones
It is fairly easy to convert binary to hex and hex to binary. I find it much
easier to multiply and divide by 2 rather than by 16, so when faced
with changing hex into denary and denary into hex I often change
them into binary first. It is a longer route but at least I can do it without
my calculator (see Figure 3.2).
Figure 3.2
A longer route may
prove easier
Obsolete octal  probably not worth reading
Octal is another number system which has no advantages over hex but
is still met from time to time. Only a brief look will be offered here just
to make sure that we have at least mentioned it.
In hex, we used binary bits in groups of four because 11112 adds up to
15 which is the value of the highest digit (F) in hex. In octal, we use
groups of three bits. The highest value is now 1112 which is 7. Octal
therefore has eight digits and counts from 0 to 7. The count
proceeds:
0
1
2
3
4
5
6
7
There is no 8th digit so reset the count to 0 and put a 1 in the next
column.
35
Introduction to Microprocessors and Microcontrollers
10
11
12
13
14
15
16
17
Now go straight to 20
20
etc.
No letters are involved and it is often not recognized as octal until we
realize that none of the numbers involve the digits 8 or 9.
Conversions follow the same patterns as we have seen for hex.
Octal to denary: the column heading values are 84, 83, 82, 81, 80.
Denary to octal: divide by 8 and write down the remainder then read
remainders from the bottom upwards. Use the subscript 8 to indicate
an octal number, e.g. 6410 = 1008.
Octal to binary: write each octal digit down as a three digit binary
group.
Binary to octal: start from the right-hand side and chop the binary
numbers into groups of three, then evaluate each group.
I think that is enough for octal. It s (fairly) unlikely you will meet it
again so we can say  goodbye Octal .
Quiz time 3
In each case, choose the best option.
1 Which of these represents the largest number?
(a) 10008
(b) 100010
(c) 10002
(d) 1000H
2 The number CD02H is equal to:
(a) 5248210
(b) 5422810
(c) 5632210
(d) 5284210
36
Hexadecimal  the way we communicate with micros
3 The base of a number system is:
(a) always the same as the highest digit used in the system.
(b) usually +5 or +3.3.
(c) equal to the number of different digits used in the system.
(d) one less than the highest single digit number in the system.
4 Which of these numbers is the same as
101101110102:
(a) 164610
(b) 5BA16
(c) AB5H
(d) B72h
5 The number of digits in a denary number is often:
(a) more than the number of digits in the equivalent binary
number.
(b) less than or equal to the number of digits in the equivalent hex
number.
(c) more than the number of digits in the equivalent hex
number.
(d) more than the number of digits in the equivalent decimal
number.
37
4
How micros calculate
How the microprocessor handles numbers (and letters)
In the last chapter, we saw how numbers could be represented in
binary and hex forms. Whether we think of a number as hex or binary
or indeed denary, inside the microprocessor it is only binary. The
whole concept of hex is just to make life easier for us.
We may sit at a keyboard and enter a hex (or denary) number but the
first job of any microprocessor-based system is to convert it to binary.
All the arithmetic is done in binary and its last job is to convert it back
to hex (or denary) just to keep us smiling.
There was a time when we had to enter binary and get raw binary
answers but thankfully, those times have gone. Everything was
definitely NOT better in the  good old days .
The form binary numbers take inside of the microprocessor depends
on the system design and the work of the software programmers. We
will take a look at the alternatives, starting with negative numbers.
In real life, it is easy, we just put a  symbol in front of the number and
it is negative so +4 becomes  4. Easy, but we don t have any way of
putting a minus sign inside the microprocessor. We have tried several
ways round the problem.
38
How micros calculate
Signed magnitude numbers
The first attempt seemed easy but it was false optimism. All we had to
do was to use the first bit (msb) of the number to indicate the sign 1 =
minus, 0 = plus.
This had two drawbacks.
1 It used up one of the bits so an 8-bit word could now only hold
seven bits to represent numbers and one bit to say  plus or  minus .
The seven bits can now only count up to 11111112 = 127 whereas
the eight bits should count to 255.
2 If we added two binary numbers like +127 and +2, we would
get:
01111111
00000010
10000001
The msb means the
number is negative This part is the
number 1
The msb (most significant bit) of 1 means it is a minus number and the
actual number is 0000001 = 1. So the final result of +127 + 2 is not
129 but minus 1.
When we use a microprocessor to handle arithmetic with these
problems, we can ensure that the microprocessor can recognize this
type of accidental negative number. We can arrange for the micro-
processor to compensate for it but it is rather complicated and slow.
Luckily, a better system came along which has stood the test of time,
having been used for many years.
Complementary numbers
This has two significant advantages:
1 It allows the full number of bits to be used for a number so an 8-bit
word can count from 0 to 111111112 or 255.
2 It is easy to implement with addition and subtraction using
substantially the same circuitry.
So, how do we manage to use all eight bits for numbers yet still be able
to designate a number positive or negative?
That s clever. We will start by looking at positive numbers first because
it is so easy. All positive numbers from 0 to 255 are the same as we get
by simply converting denary to binary numbers. So that s done.
39

ę!
ćł
ćł
ćł
ę!
ćł
ćł
ćł
Introduction to Microprocessors and Microcontrollers
Addition
Example
Add 01011010 + 00011011.
The steps are just the same as in  normal denary arithmetic.
Step 1 Lay them out and start from the lsb (least significant bit) or right-hand bit
0 1 0 1 1 0 1 0 +
0 0 0 1 1 0 1 1
Add the right-hand column and we have 0 + 1 = 1.
So we have
0 1 0 1 1 0 1 0 +
0 0 0 1 1 0 1 1
1
Step 2 Next we add the two 1s in the next column. This results in 2, or 10 in
binary. Put the 0 in the answer box and carry the 1 forward to the next
column
0 1 0 1 1 0 1 0 +
0 0 0 1 1 0 1 1
0 1
1
Step 3 The next column is easy 0 + 0 + 1 = 1
0 1 0 1 1 0 1 0 +
0 0 0 1 1 0 1 1
1 0 1
1
Step 4 The next line is like the second column, 1 + 1 = 10. This is written as an
answer of 0 and the 1 is carried forward to the next column
0 1 0 1 1 0 1 0 +
0 0 0 1 1 0 1 1
0 1 0 1
1 1
Step 5 We now have 1 in each row and a 1 carried forward so the next column
is 1 + 1 + 1 = 3 or 11 in binary. This is an answer of 1 and a 1 carried
forward to the next column
0 1 0 1 1 0 1 0 +
0 0 0 1 1 0 1 1
1 0 1 0 1
1 1 1
40
How micros calculate
Step 6 The next column is 0 + 0 + 1 = 1, and the next is 1 + 0 = 1 and the final
bit or msb is 0 + 0 = 0, so we can complete the sum
0 1 0 1 1 0 1 0 +
0 0 0 1 1 0 1 1
0 1 1 1 0 1 0 1 90 + 27 = 117
1 1 1
Subtraction
Here is a question to think about: What number could we add to 50 to
give an answer of 27? In mathematical terms this would be written as
50 + x = 27.
What number could x represent? Surely, anything we add to 50 must
make the number larger unless it is a negative number like  23:
50 + ( 23) = 27
The amazing thing is that there is a number that can have the same
effect as a negative number, even though it has no minus sign in front
of it. It is called a  two s complement number.
Our sum now becomes:
50 + (the two s complement of 23) = 27
This magic number is the two s complement of 23 and finding it is very
simple.
How to find the two s complement of any binary number
Invert each bit, then add 1 to the answer
All we have to do is to take the number we want to subtract (in its
binary form) and invert each bit so every one becomes a zero and each
zero becomes a one. Note: technically the result of this inversion is
called the  one s complement of 23. The mechanics of doing it will be
discussed in the next chapter but it is very simple and the facility is
built into all microprocessors at virtually zero cost.
Converting the 23 into a binary number gives the result of 000101112
(using eight bits). Then invert each bit to give the number 111010002
then add 1. The resulting number is then referred to as the  two s
complement of 23.
1 1 1 0 1 0 0 0 The one s complement
1 +
1 1 1 0 1 0 0 1 The two s complement
41
Introduction to Microprocessors and Microcontrollers
In this example, we used 8-bit numbers but the arithmetic would be
exactly the same with 16 bits or indeed 32 or 64 bits or any other
number.
Doing the sum
We now simply add the 50 and the two s complement of 23:
50 + (the two s complement of 23) = 27
1 1 1 0 1 0 0 1 50
0 0 1 1 0 0 1 0 + The two s complement of 23
1 0 0 0 1 1 0 1 1 Answer is 27
1
The answer is 100011011.
Count the bits. There are nine! We have had a carry in the last column
that has created a ninth column. Inside the microprocessor, there is
only space for eight bits so the ninth one is not used. If we were to ask
the microprocessor for the answer to this addition, it would only give
us the 8-bit answer: 000110112 or in denary, 27. We ve done it! We ve
got the right answer!
It was quite a struggle so let s make a quick summary of what we
did.
1 Convert both numbers to binary.
2 Find the two s complement of the number you are taking away.
3 Add the two numbers.
4 Delete the msb of the answer.
Done.
A few reminders
1 Only find the two s complement of the number you are taking away
 NOT both numbers.
2 If you have done the arithmetic correctly, the answer will always
have an extra column to be deleted.
3 If the numbers do not have the same number of bits, add leading
zeros as necessary as a first job. Don t leave until later. Both of the
numbers must have the same number of bits. They can be 8-bit
numbers as we used, or 16, or 32 or anything else so long as they
are equal.
A quick way to find the two s complement of a binary number
Start from the left-hand end and invert each bit until you come to the
last figure 1. Don t invert this figure and don t invert anything after
it.
42
How micros calculate
Example 1
What is  2410 expressed as an 8-bit two s complement binary
number?
1 Change the 2410 into binary. This will be 11000.
2 Add leading zeros to make it an 8-bit number. This is now
00011000.
3 Now start inverting each bit, working from the left until we come to
the last figure  1 . Don t invert it, and don t invert the three zeros that
follow it.
Don t
invert
these
0 0 0 1 1 0 0 0
Invert
Result is 1 1 1 0 1 0 0 0
these
Example 2
What is  10010 expressed as a 16-bit two s complement binary
number?
1 Convert the 10010 into binary. This gives 11001002.
2 Add nine leading zeros to make the result the 16-bit number
0000000001100100.
3 Now, using the quick method, find the two s complement:
Stop
inverting
here
0000000001100100
The result is 1111 1111 1001 1100
Example 3
Find the value of 1011 01112  00 10112 using two s complement
addition.
1 The second number has only six bits so add two zeros on the left-
hand end to give 1011 0111  0000 1011.
2 Invert each bit in the number to be subtracted to find the one s
complement. This changes the 00001011 to 11110100.
3 Add 1 to give the two s complement: 11110100 + 1 = 11110101 (or
do it the quick way).
43


Introduction to Microprocessors and Microcontrollers
4 Add the first number to the two s complement of the second number:
1 0 1 1 0 1 1 1
1 1 1 1 0 1 0 1 +
1 1 0 1 0 1 1 0 0
1 1 1 1 1 1 1
5 The result so far is 110101100 which includes that extra carry so we
cross off the msb to give the final answer of 101011002.
Floating point numbers
Eight-bit numbers are limited to a maximum value of 111111112 or
25510. So, 0  255 means a total of 256 different numbers. Not very
many. 32-bit numbers can manage about 41D 4 billion. This is quite
enough for everyday work, though Bill Gates bank manager may still
find it limiting. The problem is that scientific studies involve extremely
large numbers as found in astronomy and very small distances as in
nuclear physics.
So how do we cater for these? We could wait around for a 128-bit
microprocessor, and then wait for a 256-bit microprocessor and so on.
No, really, the favourite option is to have a look at alternative ways of
handling a wide range of numbers. Rather than write a number like 100
we could write it as 1 102. Written this way it indicates that the
number is 1 followed by two zeros and so a billion would be written
as 1 109. In a similar way, 0.001 is a 1 preceded by two zeros would
be written as 1 10 3 and a billionth, 0.000000001, would be 1
10 9. The negative power of ten is one greater than the number of zeros.
By using floating point numbers, we can easily go up to 1 1099 or
down to 1 10 99 without greatly increasing the number of digits.
Fancy names
Normalizing
Changing a number from the everyday version like 275 to 2.75 102
is called normalizing the number. The first number always starts with
a single digit between 1 and 9 followed by a power of ten.
In binary we do the same thing except the decimal point is now called
a binary point and the first number is always 1 followed by a power of
two as necessary.
Three examples
1 Using the same figure of 275, this could be converted to 100010011
in binary. This number is normalized to 1.00010011 28.
2 A number like 0.00010012 will have its binary point moved four
places to the right to put the binary point just after the first figure 1
so the normalized number can be written as 1.001 2 4.
44
How micros calculate
3 The number 1.1012 is already normalized so the binary point does
not need to be moved so, in a formal way, it would be written as
1.101 20.
A useless fact
Anything with a power of zero is equal to 1. So 20 = 1, 100 = 1. It is
tempting but total nonsense to use this fact to argue that since 20 = 1
and 100 = 1 then 2 must equal 10!
Terminology
There are some more fancy names given to the parts of the number to
make them really scary.
Exponent
A normalized number: 8.0245 109
Radix
Mantissa
The exponent is the power of ten, in this example, 9. The mantissa, or
magnitude, is the number, in this case 8.0245. The radix is the base of
the number system being used, 2 for binary, 16 for hex, 10 for
decimal.
Storing floating point numbers
In a microprocessor, the floating point is a binary number. Now, in the
case of a binary number, the mantissa always starts with 1 followed by
the binary point. For example, a five digit binary mantissa would be
between 1.0000 and 1.1111.
Since all mantissas in a binary system start with the number 1 and the
binary point, we can save storage space by missing them out and just
assuming their presence. The range above would now be stored as
0000 to 1111.
It is usual to use a 32-bit storage area for a floating point number. How
these 32 bits are organized is not standardized so be careful to check
before making any assumptions. Within those 32 bits, we have to
include the exponent and the mantissa which can both be positive or
negative. One of the more popular methods is outlined below.
45

�!�ł�ł�ł�ł
�!�ł
�ł
Introduction to Microprocessors and Microcontrollers
Exponent Mantissa S
Bit 31 24 23 1 0
Bit 0 is used to hold the sign-bit for the mantissa using the normal
convention of 0 = positive and 1 = negative.
Bits 1 23 hold the mantissa in normal binary.
Bits 24 31 hold the exponent. The eight digits are used to represent
numbers from  127 to +128 using either two s complement numbers
or excess-127 notation.
We have already met two s complement numbers earlier in this
chapter so we will look at excess-127 notation now.
Excess-127 notation
This is very simple, despite its impressive name. To find the exponent
just add 127 to its value then convert the result to binary. This addition
will ensure that all exponents have values between 0 and 255, i.e. all
positive values.
Example
If the exponent is  35 then we add 127 to give the result 92, which we
can then convert to binary (01011100).
When the value is to be taken out of storage and converted back to a
binary number, the above process is reversed by subtracting the 127
from the exponent.
Size, accuracy and speed
The mantissa can go as high as 1.1111 1111 1111 1111 1111 1112. To
the right of the binary point the decimal equivalents are values of 1.5
+ 0.25 + 0.125 + 0.0625 etc. Adding these up gives a total that is
virtually 2  but not quite. The larger the number of bits in the
mantissa, the more accuracy we can expect in the result. The exponent
has eight bits so it can range from  127 to +128 giving a maximum
number of 1 2128 which is approximately 3.4 1038. The accuracy
is limited by the number of bits that can be stored in the mantissa,
which in this case is 23 bits.
If we want to keep to a total of 32 bits, then we have a trade-off to
consider. Any increase in the size of the exponent, to give us larger
numbers, must be matched by reducing the number of bits in the
mantissa that would have the effect of reducing the accuracy. Floating
point operations per second (FLOPS) is one of the choices for
measuring speed.
46
How micros calculate
IBM are building (2002) a new super computer employing a
million microprocessors. The Blue Gene project will result in a
computer running at a speed of over a thousand million million
operations per second (1 petaflop). This is a thousand times faster
that the Intel 1998 world speed record or about two million times
faster than the current top-of-the-range desktop computers.
Single and double precision
If we need more accuracy, an alternative method is to increase the
number of bits that can be used to store the number from 32 (single-
precision) to 64 (double-precision). If this extra storage space is
devoted to increasing the mantissa bits, then the accuracy is increased
significantly.
Binary coded decimal (BCD)
Binary coded decimal numbers are very simple. Each decimal digit is
converted to binary and written as a 4-bit or 8-bit binary number. The
number 5 would be written as 01012 or 000001012. So far, this is the
same as  ordinary binary but the change occurs when we have more
digits.
Consider the number 2510. In regular binary this would convert to
110012. Alternatively, we could convert each digit separately to 4-bit
or 8-bit numbers:
2 = 00102 or 0000 00102
5 = 01012 or 0000 01012
Putting these together, 2510 could be written using the 4-bit numbers
as 0010 01012. This uses one byte and is called Packed BCD.
Alternatively, we could use the 8-bit formats and express 2510 as 0000
0010 0000 01012 and would now use two bytes. This is called
Unpacked BCD.
There are two disadvantages. Firstly, many numbers are of increased
length after converting to BCD, particularly so if we use unpacked
BCD or the numbers are very large like 25 1075. In addition,
arithmetic is much more difficult although, generally, microprocessors
do have the ability to handle them.
The advantage becomes apparent when the microprocessor is
controlling an external device like digits on displays at a filling station
or accepting inputs from a keyboard. The coding is simple and does
not involve the conversion of the numbers to binary.
47
Introduction to Microprocessors and Microcontrollers
Overall
Arithmetic use binary
Inputting and outputting numbers use BCD
Quiz time 4
In each case, choose the best option.
1 The number  3510, when expressed as an 8-bit
binary number in two s complement form, is:
(a) 00100011.
(b) 1111011101.
(c) 11011101.
(d) 00110101.
2 The number 710 converted to an unpacked BCD
format would be written as:
(a) 1110 0000.
(b) 7H.
(c) 0000 0111.
(d) 0111.
3 The signed magnitude number 110011002 is
equivalent to:
(a)  7610.
(b) 20410.
(c) CCH.
(d) 121210.
4 In the number 0.5 1024 the number:
(a) 10 is the mantissa.
(b) 24 is the exponent.
(c) 0 is the sign bit.
(d) 5 is the radix.
5 A signed magnitude number that has a figure:
(a) zero as the msb is a negative number.
(b) one as the lsb is a negative number.
(c) one as the msb is a negative number.
(d) zero as the lsb is a negative number.
48
5
An introduction to logic
gates and their uses
Opening and closing gates
In the last chapter the binary values zero and one are represented by
two different voltages. Binary zero is a voltage close to 0 V and binary
one by a voltage close to +5 V (some logic circuits use other voltage
levels but this is a popular value and will serve as an example).
A gate is a simple electronic circuit that has a single output voltage that
corresponds to one of the two binary values. These gates are often
referred to as  logic gates and the output voltages as  logic 0 or  logic
1 instead of binary 0 and 1. The distinction is just in the name. If you
were to ask a mathematician or a computer programmer, they will
refer to the outputs as binary values but an electronics engineer will
call them logic levels. It really doesn t matter.
What decides the output voltage?
We connect one or more voltages to the input of the gate. These input
voltages are either logic 0 or logic 1 levels. The logic gate looks at the
input voltages and  decides , depending on its design, what voltage to
produce at the output of the circuit.
There are only four basic designs of gate. They are called the NOT gate,
the AND gate, the OR gate and the XOR gate. Notice how we use capital
letters for the names of the gates otherwise we can finish up with some
almost indecipherable sentences. Not not or and not and or not . . .
49
Introduction to Microprocessors and Microcontrollers
A little reminder before we start. Logic gates are clever little chaps but
they are not magic. Just like any other electronic circuit, they need
power supplies to make them work. Now, because all gates and
microprocessors need power supplies, we tend to assume that
everyone knows that. You will notice that power supplies are not
shown in any of the diagrams in this chapter but that doesn t mean that
they are not there!
We will explore these gates now, starting from the simplest.
The NOT gate
It has only one input and performs a very simple function. It simply
reverses the binary value. If we put a logic 1 into it, we get a logic 0 at the
output. Similarly, a 0 at the input gives a 1 at the output. On a diagram,
we represent a NOT gate by a symbol as shown in Figure 5.1.
Figure 5.1
Symbols for a NOT gate
A truth table
This is an alternative to the wordy description of how a gate works. It
simply lists all the possible inputs to the gate together with the
corresponding outputs. The truth table for a NOT gate is really easy.
There are only two possible inputs: 0 and 1 as we can see in Figure
5.2.
So, how is it used in the microprocessor?
The truth table only shows what happens to a single bit but in the
microprocessor we may want to use a NOT gate to invert a hex
number like A4H. In this case the hex number is first converted to
an 8-bit binary number. This process is not performed by the
50
An introduction to logic gates and their uses
Figure 5.2
The truth table for
a NOT gate
microprocessor but by other external circuits. By the time it reaches
the microprocessor it has been converted to the binary equivalent of
101001002.
The NOT gate has only one input so, to handle an 8-bit binary word,
we will need eight NOT gates. Now it becomes much easier. Each
NOT gate inverts just one of the bits and all the outputs are grouped
together to form a new hex number. See how it works in Figure 5.3.
The result was the hex number 5BH. This is curious. If we add A4H to
this result of 5BH we get FFH or all  ones in binary, 111111112. There
was nothing special about the number A4H. It happens with any pair
of numbers generated by NOT gates. Why is this? Figure 5.3 gives a
clue.
Figure 5.3
Inverting a hex
number
51
Introduction to Microprocessors and Microcontrollers
A little extra bit
We can show an inversion by drawing a line over the top. In Figure 5.2
the input was given the letter A and the output was shown as X. We
could say: X = A.
AND gate
Unlike the NOT gate, an AND gate has more than one input. In fact we
can have as many inputs as we like but the good news is that in
microprocessors only two inputs are used. This simplifies the symbols
and the truth tables considerably.
An AND gate is any circuit that gives a logic (or binary) 1 if (and
only if) every input to the circuit is at logic 1. So in microprocessors,
with only two inputs, it is easier to say that it gives a 1 out if both of
the inputs is at logic 1. The symbols for the AND gate are shown in
Figure 5.4.
Figure 5.4
Symbols for an AND gate
The truth table in Figure 5.5 has four rows to cover all the possible
combinations of inputs.
What is the point of an AND gate?
We often meet an AND gate without realizing it. When we climb into
an elevator the door must be closed AND the floor button pressed
before the motor will start. This is an AND gate in action.
In a microprocessor, groups of AND gates are used to handle pairs
of inputs at the same time just like we did with the NOT gates. For
convenience we usually use hex numbers to describe groups of
52
An introduction to logic gates and their uses
Figure 5.5
The truth table for an
AND gate
inputs and outputs but remember it s all really happening in
binary.
Unless we appreciate that the hex numbers are really just groups of
ones and zeros, it may seem odd to talk about putting numbers
through AND gates. Figure 5.6 may make it (a little) clearer. In this
figure, we have used hex inputs of 37H and 5BH giving a result of
13H. Note that the AND gate does not add numbers.
A little extra bit
In data books and manuals, the AND function is abbreviated to a dot
like a period (full-stop). So, if an AND gate had two inputs called A and
B and an output called X, then we could write X = A.B
Sometimes it is further simplified to X = AB
Very occasionally we come across a symbol so we can write
X = A B.
Figure 5.6
An AND gate in
action
53
Introduction to Microprocessors and Microcontrollers
The NAND gate
The word NAND is just a fancy contraction of NOT and AND. The
NAND gate is just an AND gate followed by a NOT gate so all the
outputs shown in the AND truth table are just inverted by the NOT
gate.
On a diagram, this combination is indicated by putting a small circle
on the end of the symbol. The symbol and truth table are shown in
Figure 5.7.
Figure 5.7
The truth table
for a NAND
gate
It is better not to make a big effort to learn the NAND gate. Just
remember that it s the same as the AND gate except the output has
been inverted by the NOT gate that has been added internally.
The symbol has a line over the top to indicate the added NOT
function. A two input NAND could be written as X = A.B or X = AB or
very occasionally X = A B.
The OR gate
This follows on nicely from the AND gate. The OR gate gives a
logic one at its output if either (or both) of the inputs is at a logic
one. Just like the AND gate, the OR gate can have as many inputs
as we wish but in a microprocessor, we only use two input
versions. Its symbols and truth table are shown in Figures 5.8 and
5.9.
54
An introduction to logic gates and their uses
Figure 5.8
Symbols for an OR gate
Figure 5.9
The truth table for an
OR gate
Another extra bit
The OR function can be written as + or sometimes . So, if an OR gate
had two inputs called A and B and an output called X, then we could
write X = A + B or X = A B. Don t mistake this + sign as  plus as in
addition 3 + 4 = 7.
The NOR gate
As we would expect, this is just the same as the OR gate except for the
NOT gate added to the output. The symbol has the inversion line over
it to give X = A + B or A B (see Figure 5.10).
55
Introduction to Microprocessors and Microcontrollers
Figure 5.10
The NOR gate
The XOR gate
This is called the Exclusive-OR gate, which is abbreviated to XOR or
EOR. Here are two examples of everyday English, both using the word
 or .
We get into an elevator and the operator says to us  Do you want to go
up or down? We have a choice, we can decide to go up or we can go
down. We have two possible answers   up or  down .
On the way home we buy a burger. We are asked  Do you want
ketchup or mustard? This time we could answer  ketchup or
 mustard or we could say  both .
Figure 5.11
The XOR or
difference gate
56
An introduction to logic gates and their uses
This is a fine example of how we can make something which is really
easy appear difficult. The word  or in English has two different
meanings which can be referred to as exclusive and inclusive. The first
example used the exclusive  or because we could have one or the
other but not both. The second situation uses the inclusive  or because
we could have one or the other or both. We use both meanings
everyday and understand them so well that we know automatically
which one is meant.
In the XOR gate the output is a logic one if either input is a logic 1 but
not both. Only two-input XOR gates are manufactured, whether for
use in a microprocessor or not (see Figure 5.11).
To look at it in another way, the output from an XOR is a logic one if
the two inputs are different. For this reason, it is often called a
 Difference gate.
The electronic padlock
When we want to take some money out of our bank account we can
go to the money machine and pop our card in. It then asks us to key
in our code number which is usually a four-digit number. If the number
is correct, we have access to our account.
In the background is a microprocessor with two useful attributes:
1 Microprocessors are very good at spotting whether a number is zero
or not.
2 They contain a series of XOR gates.
So how can it check my number? One easy method is to compare our
keyed-in number with the number read from the magnetic strip on the
back of the card. Each of our code numbers is treated as a hex number
and converted to a four-bit binary number. This results in one 16-bit
binary number from the keyboard and another from the magnetic strip
on the card, which now have to be compared.
Inside the microprocessor are 16 XOR gates each with two inputs 
one from the card and one from the keyboard. Every time the bits
coincide, whether they are both zeros or both ones, the output will be
a zero.
The 16 results are quickly scanned looking for any output which is not
zero. This would indicate an incorrect number. The process is shown
in Figure 5.12 but for clarity, only four of the XOR gates have been
shown. In real life, there will be 16 of them, of course.
The extra bit
The XOR function can be written as . So, if an XOR gate had inputs
called A and B and an output called X, then it would be abbreviated
as X = A B.
57
Introduction to Microprocessors and Microcontrollers
Figure 5.12
Using an XOR
gate to compare
numbers
The XNOR (or ENOR) gate
This is the inverted version of the XOR gate. These result in the output
being at logic 1 only when the two inputs have the same value or are
equivalent. For this reason, it is often referred to as the Equivalence
gate (see Figure 5.13).
Figure 5.13
The truth table for
an XNOR or
equivalence gate
58
An introduction to logic gates and their uses
The tri-state buffer
This looks like a logic gate but behaves more like a switch. In Figure
5.14 we can see that it is quite simple having only an input, an output
and another connection called an  enable . The purpose of the enable
line is to switch the buffer on or off. When the buffer is switched on, any
signal applied to the input appears at the output and when it is switched
off, the buffer is disconnected so that there is no output signal present.
Figure 5.14
A tri-state buffer is
like a switch
So, why not just use a switch?
The problem with a switch is that, once closed, the input and output
are physically joined so that input and output circuits are connected
together. The buffer is a one-way device for signals so that the output
is isolated from the input to prevent any changes in the next circuit
from interfering with the input circuits.
Look for the circles
In the NOT, NAND NOR and XNOR gates a small circle was shown
at the output to indicate that the output has been inverted. The same
Figure 5.15
An active-low tri-state
buffer
59
Introduction to Microprocessors and Microcontrollers
Figure 5.16
The four types of tri-
state buffer
thing occurs with the buffer. If a circle is shown, the output is an
inverted copy of the input.
We apply a similar convention to the enable input. If the input has to
be a logic 1 level to switch it on, then it is as shown in Figure 5.15. If,
however, the enable input has to be a logic 0 to enable it a small circle
is shown at the point where the enable line connects with the buffer.
When the buffer is switched off, it is said to be disabled. This would
give us four possible buffers as in Figure 5.16.
Quiz time 5
In each case, choose the best option.
1 Which of the gates shown in Figure 5.17 would have
an output of logic zero?
(a) A, B, C.
(b) A and D.
(c) B and D.
(d) None of them.
Figure 5.17
Which outputs are
at logic 0?
60
An introduction to logic gates and their uses
2 If the hex number 4C is applied to eight NOT gates,
the output would have the value of:
(a) B3.
(b) 4C.
(c) FF.
(d) CD.
3 Which two-input gate has an output of logic 0 when
both inputs are at logic 1:
(a) OR.
(b) AND.
(c) NOT.
(d) XOR.
4 A gate is:
(a) necessary to keep the cattle in the field.
(b) always operated from a supply of +5 V.
(c) an electronic circuit with three connecting wires.
(d) an electronic switching circuit whose output voltage depends
on the inputs.
5 Adding the input and output binary values of a NOT
gate:
(a) can be 0, 1 or 2 depending on the inputs.
(b) will give a voltage around 2.5 V.
(c) always results in 1.
(d) is not possible.
61
6
Registers and memories
The logic gates that we met in the last chapter occur in their millions
in microprocessors and in the surrounding circuitry. They are to be
found in all microprocessors from the oldest and simplest, to this years
 Ultimate Wonder Child and even next year s  New and Improved
Ultimate Wonder Child MkII .
When logic gates are used in a microprocessor, they are usually
grouped together into circuits, called flip-flops, each one being able to
store a single binary digit.
A flip-flop or bistable
A flip-flop or bistable is a circuit that can store a single binary bit 
either 0 or 1. One useful characteristic of the flip-flop is that it can only
have an output of 0 or 1. It cannot hover somewhere in between. The
flip-flop is shown in Figure 6.1. The purpose of the clock input is to tell
the flip-flop when to accept the new input level.
The sequence of the events is:
1 Apply the binary level to be stored.
2 Wait a short time (a few nanoseconds) until the voltage is properly
established.
3 Apply a signal to the clock input to tell the flip-flop to memorize the
signal present at the input.
62
Registers and memories
Figure 6.1
A flip-flop  the
basic building
block of a
microprocessor
Why do we have to wait?
When we apply a voltage to a length of wire, we would hope that the
voltage changes as in Figure 6.2. Unfortunately, it takes a few
nanoseconds to settle down. The rise of voltage travels along the
connecting wire and is reflected from the end causing another voltage
to be reflected towards the input. This reflection is itself reflected and
after repeated reflections, the voltage slowly settles down to its new
level as in Figure 6.3. This occurs if we suddenly tip a bucket of water
into a half-filled bath. The added water sets up a wave that is reflected
Figure 6.2
A voltage is
switched on  how
we would like it to
change
Figure 6.3
A voltage is
switched on  what
really happens?
63
Introduction to Microprocessors and Microcontrollers
backwards and forwards along the bath as the new level is established.
If we didn t wait for the voltage to settle down, we could accidentally
store an incorrect value.
And what about the clock signal?
This is just an input to tell the flip-flop that it is time to read the input
level. All microprocessor operations are carefully timed by clock
pulses to ensure that the system operates in the correct sequence.
The clock signal is usually a positive-going voltage pulse. This pulse
can be used to switch two circuits at different times by designing one
circuit to respond to an increasing voltage and the other to use a
decreasing voltage. If, for example, the pulse in Figure 6.4 were to be
10 ns wide then this could create the required delay for the voltage to
settle. The circuit supplying the input voltage is kicked into action by
the positive-going edge and then 10 ns later the negative-going edge
instructs the flip-flop to save the data present at that time.
Figure 6.4
Using a clock
pulse to control
timing of a
circuit
A register
A register is just a collection of flip-flops. A flip-flop can only store one
bit so to handle 32 bits at a time we would need 32 flip-flops and
would refer to this as a 32-bit register. To save space, Figure 6.5 shows
an 8-bit register.
The register has two distinct groups of connections: the data bits 0 to
7 and the control signals. The data connections or data lines carry the
64
Registers and memories
Figure 6.5
An 8-bit register
binary levels in or out of the register. The number of data lines
determines the size of the register so a 64-bit register would have 64
data connections.
The three control signals include two new ones
1 Enable. This is a simple on/off switch for the register. We met this in
Chapter 5 with the tri-state buffer. The line over the top of the word
indicates that it is  on when this line is  low or at logic zero. We
tend to say the line is  active low in this situation. Therefore, it
follows that the register is disabled or switched  off when the enable
line is at logic 1 or  high . Nearly all control lines are active low. The
benefit of having the enable line is that we are able to disconnect a
register without doing any physical uncoupling of links etc.
2 Read/write. The terms  read and  write are used to describe the
direction of data movement. We  write data into a register then
 read the data to recover it.
You may remember that the flip-flop in Figure 6.1 included a separate
line for reading the data and another for writing. Now, while this was
OK with a single flip-flop, a 64-bit register would require 128 lines just
to carry the data in and out. By using the tri-state buffer from Chapter
5, we can use each line to read and write data as required. The tri-state
buffers are all controlled by the logic level applied to the read/write
line. The normal convention applies  the line over the  write means
that this line is taken low to write data and, of course, high to read
data.
It may be interesting to look inside the register to see how the tri-
state buffer is used to achieve this two-way traffic on a single wire.
Have a look at Figure 6.6. Two tri-state buffers are connected back-
to-back. In the first example, logic 1 input will enable the top buffer.
The control voltage is inverted to a logic 0, which then disables the
65
Introduction to Microprocessors and Microcontrollers
Figure 6.6
Two-way
data flow
lower buffer. Data can now flow from left to right. When the control
signal changes to a logic 0, the top buffer is disabled and the lower
one is enabled and the reverse direction of data flow is possible.
Note how two buffers and an inverter are used for each line to be
controlled. A single control line is used to switch all the data lines at
the same time.
What are registers for?
Registers are storage areas inside the microprocessor. Almost the
whole of the microprocessor is made of registers. They store the data
that is going to be used, they store the instructions that are to be used
and they store the results obtained. Nearly all registers involve tri-state
buffers to control the direction of data flow.
In most cases, the data to be stored is applied to the inputs of the
register and, after a short pause to let the voltages stabilize, the register
is enabled by the voltage on the enable control. The information is
then safely stored until it is next required.
66
Registers and memories
The sequence is:
1 The read/write line is taken to logic 0 to allow the register to receive
data from an external source.
2 The enable control switches ON the tri-state buffers at the input to
each flip-flop.
3 The data is written to each flip-flop and then the enable control puts
the register to sleep until the next time it is needed.
How long can it be stored?
It will be stored until the power supplies are removed  either by an
equipment fault or, more usually, by the system being switched off.
The data does not deteriorate in storage.
Shift registers
These are a variation on the register theme. They still consist of group
of flip-flops but the interconnections have been changed. Have a look
at the arrangement in Figure 6.7 and see if you can guess the likely
outcome.
Figure 6.7
A shift-left register
This is called a shift register because the data is shifted from one flip-
flop to the next each time the clock pulse occurs. Specifically, the one
shown is a shift left register because each bit moves one place to the
left on each clock pulse. All the bits move at the same time. The last
one in bit 7 drops off the end and is lost while at the other end, a new
bit is entered into bit 0.
In Figure 6.8, the register has been loaded with the binary equivalent
of 3610 or 24H and a series of zeros has been chosen to be loaded at
the bit 0 end.
67
Introduction to Microprocessors and Microcontrollers
Figure 6.8
A shift-left
register in
action
Follow the sequence through and in particular note what happens to
the numbers stored:
1 After one clock pulse, all the bits will have moved one place to the
left. A new  0 will have entered bit 0 and the last, which was in bit
7, will have fallen off the end of the world. The bits stored at this
time are 01001000 and the numerical value is 48H or, in denary,
7210. Notice how shifting the bits to the left has multiplied the value
by 2.
2 After eight clock pulses, all the existing data in the register will have
been flushed out and refilled with zeros. The register will hold the
number zero so there is a limit to how many times we can multiply
by shifting the register.
3 After 5000 clock pulses, it is still full of zeros. Admittedly, they will
be new zeros that have replaced the others but that will not make
any difference.
What happens if we don t apply any input data to enter bit 0?
If the input connection is simply left unconnected, there will be no
voltage information coming in to the first flip-flop. The input is said to
be  floating and will assume some voltage which may be low or high.
As the clock pulses are applied this may well result in random data
68
Registers and memories
entering the register. Random data is of no help to anyone so we
normally overcome this problem by building in a bias in the design of
the register to make it have a tendency to move towards one logic level
rather than the other. It is up to the manufacturer but most floating
inputs will float high and enter ones.
The shift register considered has been a shift-left register, which means
that the information is fed in at the right-hand end and moves
progressively towards the left along the register until it drops off the
end.
By re-arranging the register, it is easy to produce a shift-right register as
in Figure 6.9. This has all the same properties except it shifts data
towards the right and divides the number by two each time the clock
pulse is entered. Compare Figures 6.7 and 6.9.
Figure 6.9
A shift-right
register
A real world use for a shift register
It is interesting that a shift register can perform simple multiplication
and division but it can do many jobs that are more interesting.
One example would be automatic checking of inputs. In Figure 6.10
it is controlling an automatic ticket dispenser. The customer inserts
some money and presses any button of the eight available to obtain the
ticket required  but which button was pressed?
As a button is pressed the voltage output can be designed to change
from logic 0 to logic 1 so to start with, we can assume no buttons are
pressed and the response from each button is zero. Along comes a
customer who, having read the instructions, inserted some money and
re-read the instructions and stared at the buttons, eventually decides to
press a button.
Pressing a button generates a burst of eight clock pulses and the value
of each button is loaded into the shift register. Once the button has
been pressed the zeros and ones corresponding to each of the buttons
69
Introduction to Microprocessors and Microcontrollers
Figure 6.10
Using a shift register
is loaded into the shift register. The output from each button is made
available to external circuits and one such circuit will be activated and
a ticket will drop down the chute.
For how long would the customer have to press the button?
The microprocessor is amazingly fast compared with us. If we feel the
temperature of a piece of metal and it is too hot, we immediately take
our hand off. But how long did this take? For most people the time to
think and then respond would be about one-tenth of a second. In
sport, it means that the person at the receiving end must use body
movement or magic to predict what is going to happen. Waiting to
respond to the flight of the ball will make them too late.
Most people would therefore press a button for at least 0.1 s. So what
can the microprocessor do in the same 0.1 s? A modern micro-
processor can check a button in about 0.25 �s or 0.25 millionths of a
second. In other words, it can check about 4 000 000 buttons in a
second.
We have a best response time of 0.1 s. The microprocessor has a
response time of about 0.25 s. This means than the microprocessor
lives at a speed of about 400 000 times faster than us. Can you imagine
how we would feel faced with a creature called a  Waitabit that
moves 400 000 times slower than us? It would take 11 hours to press
the button. After all that effort, it may run off at 3 cm/h (1.2 in/h) to
spend 11 years having a cup of coffee. By way of compensation, it may
well live for 28 million years!
Rotate registers
These are modified versions of the shift registers. There are only two
simple changes necessary. The first is that the data is loaded in parallel.
70
Registers and memories
This means that the data is loaded into each flip-flop in the register at
the same time. This requires a separate connection to carry each bit
but the good news is all the data is loaded under the control of a single
clock pulse so it is very much faster. Once loaded, subsequent clock
pulses cause the data to be moved along the register as before. The last
bit of data is connected back to the other end of the register instead of
dropping off the end into our bin. Have a look at Figures 6.11 and
6.12.
Figure 6.11
A rotate-left register
Figure 6.12
Data
movement in
a rotate-left
register
As with shift registers, rotate registers can be made in rotate right as
well as left versions. In microprocessors, the same register can be used
to rotate or shift in either direction.
The benefit of using a rotate rather than a shift register is that the data
is not destroyed. We have seen that a shift register is progressively
emptied as bits fall into the bin at the end. With a rotate register, the
data is not changed. If we rotate left say, six times, we only have to
rotate right six times to recover all the original data.
71
Introduction to Microprocessors and Microcontrollers
Memories
The function of a memory is to store information  almost the same as
we said for the register. Generally, a register lives within the
microprocessor and stores small quantities of data for immediate use
and it can do useful little tricks like shift and rotate. A memory is
designed for bulk storage of data but that is all it can do  no tricks this
time.
Well, almost no tricks  some types can remember the data even when
the power is switched off. The ability to remember data after the power
is switched off is the dividing line between the two main types of
memory. If it loses its data when the power is switched off, then we call
the memory RAM or volatile memory. If it can hold on to the data
without power, we call it ROM or non-volatile memory (volatile means
 able to evaporate ). This is seen in Figure 6.13.
Figure 6.13
The two classes of
memory
RAM
The letters RAM stands for Random Access Memory which is a silly,
out-of-date, name. It should be called read/write memory or RWM but
it is so difficult to get something to change once it is established.
Anyway, let s leave the name for the moment and look at the
memory.
The memory comes in an integrated circuit looking like a small
microprocessor and is usually called a memory chip. Inside, there are
a large number of registers, hundreds, thousands, millions depending
on the size of the memory. Incidentally, when we are referring to
memories, we use the word  cell instead of register even though they
are the same thing.
So, each of the internal cells may have 4, 8, 16, 32, or 64 bits stored
in flip-flops. Figure 6.14 shows the register layout in a very small
memory containing only 16 cells or locations, each of which can hold
4 bits and is given a memory number or address.
72
Registers and memories
Figure 6.14
The layout of cells in
a memory
This RAM word
In prehistoric computing days, the memory would be loaded in order.
The first group of bits would go into location 0, the next would go into
location 2, then location 3 and so on rather like a shift register. This
meant that the time to load or recover the information would increase
as we started to fill the memory and have to move further down the
memory. This was called sequential access memory (or serial access
memory), abbreviated to SAM. This was OK when a large computer
may hold 256 bits of information but would be impossibly slow if we
tried this trick with a gigabyte.
To overcome this problem, we developed a way to access any memory
location in the same amount of time regardless of where in the
memory it happens to be stored. This system was called random
access memory or RAM.
All memory, whether volatile or non-volatile is now designed as
random access memory so it would be much better to divide the two
types of memory into read/write and read only memory. But it won t
happen, RAM is too firmly entrenched.
Accessing memory
Each location in a memory is given a number, called an address. In
Figure 6.14, the 16 locations of memory would be numbered from
0 to 15, or in binary 0000 11112. The cells are formed into a
rectangular layout, in this case a 4 4 square with four columns
and four rows.
73
Introduction to Microprocessors and Microcontrollers
To use a cell, the row containing the cell must be selected and the
column containing the cell must also be activated. The shaded cell in
Figure 6.15 has the address 0110 which means that it is in row 01 and
in column 10.
To access this cell we need to apply the binary address to the row and
column decoders. When the address 0110 is applied, the first half of
the address, 01, is applied to the row decoder and the second half of
the address is applied to the column decoder. A decoder circuit is a
small logic circuit that, when fed with the address of the location, is
able to switch on the appropriate row and column.
Figure 6.15
Selecting a memory
location
The maximum number of locations that can be addressed will depend
on the number of bits in the address. We have already seen that a 4-bit
address can access 16 locations. This was because 24 = 16, so,
generally 2n = number of locations where n is the number of bits in the
address. To take a more realistic example, if we had 20 address lines
we would have 220 = 1 048 576 or 1 Meg locations.
Two types of RAM
Ram chips can be designed in two different forms which we call static
RAM (SRAM) and dynamic RAM (DRAM), as seen in Figure 6.16.
Static RAM
These are constructed of flip-flops. The problem with the flip-flop is
that it draws current all the time. Therefore, it tends to get rather warm
74
Registers and memories
Figure 6.16
The two types of
RAM
and, on a single chip, the components cannot be packed together very
tightly. The benefit is that they are very fast and are used where speed
of access is important. Static RAM is often called SRAM.
Dynamic RAM
These store the information in capacitors, which are small components
that store an electrical charge in the form of static electricity. They are
called  dynamic owing to one of its drawbacks. In use, the electricity
stored in each capacitor leaks away because of the imperfect
insulation. So, after a little while the charge has to be replaced
otherwise the DRAM will be empty and all the stored information will
be lost. This replacing is called  refreshing and has to be performed at
intervals of about 2 ms by a DRAM control circuit. To prevent any
interference with the operation of the microprocessor system, the
refreshing is done in the background whenever the DRAM is not being
used.
Once the static charge is stored, no further current is required (except
for refreshing), therefore less heat is being generated internally and we
can pack more memory into a given space. We say it has a high
packing density.
Memory organization
A memory contains a number of cells or registers that, themselves store
a number of bits. In Figure 6.14, we saw a really simple memory with
16 locations, each of which could store between 1, 4 or 8 bits. The
memory organization is always quoted as  number of locations x bits
stored in each so this memory would have an organization of
anywhere between 16 1, 16 4 or 16 8.
Static RAMs usually store 8 bits in each location so a typical chip size
would be 131 072 8 giving a total storage capacity of 1 048 576 bits.
This is often referred to as 128 K 8.
75
Introduction to Microprocessors and Microcontrollers
Dynamic RAMs store either 1 or 4 bits in each location. One bit in
each is very popular, so a typical chip organization would be
1 048 576 1 which, as we can see, would actually hold the same
total number of bits as the example SRAM  it s just the organization
that has been changed.
Three types of ROM
All ROMs are used to store information on a more-or-less permanent
basis. In use, the ROM can be read but new information cannot be
stored in it. In other words, we cannot write to it (see Figure 6.17).
Figure 6.17
Three types of
ROM
Masked ROM
A masked ROM is manufactured to our specification and cannot be
changed. We must be very sure that the information is correct before
it is made otherwise it all goes in the waste bin and the person
responsible is looking for a new job. The initial cost is necessarily high
due to the expense of the tooling required. It is only worthwhile if at
least a few thousand identical chips are required (see Figure 6.18).
Figure 6.18
The economics
of ROM choice
76
Registers and memories
Programmable ROM (PROM)
This chip is supplied with all the data held at zero by means of small
internal fuses. When one of the fuses is blown, the associated bit
changes from 0 to 1. To blow the fuses a piece of programming
equipment is needed. This equipment can be purchased quite cheaply
if only one PROM is to be programmed at a time. If a larger throughput
is needed then this will inevitably increase the cost of the equipment.
Once the fuse is blown, it cannot be repaired so if you make a mistake,
the chip is wasted.
The ROM is useful for low volume production because the initial costs
are much lower than the masked ROM but you do have to program
them yourself.
Erasable programmable ROM (EPROM)
As the name would suggest, this chip allows us to program it, then
change our mind and try again. To erase the data there are two
methods  ultraviolet light or electrical voltage pulses.
EPROMs are ideal for prototyping since it is so easy to change the data
to make modifications.
The UVEPROM
The chip is bombarded with ultraviolet light via a transparent window
on the chip. A specially constructed EPROM eraser provides the light.
We pop the chip in, close the lid and switch on the timer. After a few
minutes, the data is erased. When erased, all the data output is set to
1. We then put the chip into an EPROM programmer, usually the same
piece of gear that was used to program the PROM. We can feed in the
new data and within a couple of minutes, we have finished the
process.
They can be erased and reprogrammed about 700 times before they
become increasingly reluctant to erase and their life is over. Once
programmed, the data is safe for about seven years. For long term
storage, it is best to reload them or, better still, use a masked ROM if
available.
A safety note: be extremely careful not to expose your eyes to the
ultraviolet light from the eraser. The wavelength of 253.7 nm is very
dangerous.
Electrically erasable programmable ROM (EEPROM)
This chip uses electrical voltage pulses as inputs to clear the previous
data and is then reprogrammed in the same way as the UVEPROM. It
has the added advantage that individual parts of the data can be
77
Introduction to Microprocessors and Microcontrollers
reprogrammed without deleting everything first as is the case with the
ultraviolet version. EEPROM can be found as serial access (SAM), as
well as the more usual random access.
The reprogramming can be done while installed in the micro-
processor-based system. It does not need a separate programmer. Their
disadvantage is that they are slow to program and have a limited
number of reprogramming cycles.
Pin layout of an EPROM
Figure 6.19 shows the pin-out diagram for a 1 Mb (1 048 576 bits)
EPROM with an organization of 131 072 8 bits.
Figure 6.19
Pin out diagram of
an EPROM
Power supplies
The main power supplies to operate the chip are the +5 V applied to
the V+ pin and 0 V on the GND (ground) pin.
To program the memory, the programming voltage is applied to Vpp.
When not being programmed, it should be held at +5 V. Be careful to
read the data book  the value of Vpp differs widely.
Address pins
Address pins are always numbered starting from A0. We have seen that
the number of location is given by 2n so with 17 address lines (A0 to
A16) the number of locations would be 217 = 131 072.
78
Registers and memories
Data pins
Like the addresses, these pins always start counting from zero. In the
EPROM shown in Figure 6.19, they are abbreviated to D for data and
go from D0 to D7  eight in all. Some manufacturers call them output
pins and number them O0, O1, O2 etc. The output from these pins is
either 0 V or +5 V or near to these values.
Control pins
1 Chip enable (CE), sometimes called chip select (CS), is the main on/
off switch for the chip. It is usually active low, which means that the
chip needs a logic 0 voltage to be applied to switch the chip on. This
is indicated by a line over the CE. When the chip is switched off, it
goes to sleep and the power drops with a reduction of about 150
times.
2 Output enable (OE) leaves the chip fired up but with its output
disconnected from the data pins. This is done by disabling a series of
tri-state buffers immediately before the data pins. Disconnecting the
output pins is very much faster than switching the chip off. Watch out
for the line over the name to indicate the polarities required.
Unconnected pins
These are shown as NC and are not used. They are physically separate
from the internal chip and therefore have no effect of anything. They
should be left unconnected.
Pin layout of a SRAM
Have a look at the SRAM in Figure 6.20. Many of these pins will be
recognized as being the same as we saw with the EPROM.
Figure 6.20
Pin out diagrams
of RAM chips
79
Introduction to Microprocessors and Microcontrollers
Data pins
Since the SRAM is a read/write memory, the data pins are used to read
data into the chip and to write data out to the microprocessor system.
With this in mind, they have been called input/output pins (I/O) and,
as usual, are numbered from zero.
Control pins
1 Write enable (WE) controls internal tri-state buffers to control the
flow of data to write or read on the data pins. The line over the WE
indicates that, to write data, the pin must be held low.
2 There are two chip selects, one shown as active low and one as
active high. To enable the chip, both must have the correct voltage
present. This provides a degree of flexibility to the system designer.
If either is not required, it can simply be held down permanently to
its appropriate voltage and then the other can then be used to
control the operation of the chip.
Pin layout of a DRAM
Row address strobe (RAS) and Column address strobe (CAS)
At first glance, there does not seem to be enough address pins for the
number of locations to be addressed. A0 to A9 is only 10 pins, which
would suggest a total of 210 or 1024 locations. The trick here is to use
the same pins twice and hence load in a total 220 or 1 048 576
addresses.
The sequence of events dictates that the RAS line is taken low and the
bottom half of the address is loaded into the Rows  RAS then returns
high. Then the CAS is taken low while the remainder of the address is
fed into the columns. After this, the state of the write line (same as R/W)
determines whether data is entering or leaving the DRAM.
There is only a single bit stored in each address, the data entering via
the data in (Din) pin and leaving via the data out (Dout) pin.
Some more memories that don t fit into the general
pattern
SIMMs
Single in-line memory modules are a collection of separate RAM chips
that are mounted on a piece of board to make installation quicker and
easier. They are not actually a different type of memory.
80
Registers and memories
RAM Cards
The problem with RAM memory is that it is volatile. The information
is lost as soon as the system is switched off. RAM cards overcome this
by providing the RAM chips with their own on-board battery. In this
way, the RAM card can be removed from the system without losing the
data. It is really a RAM pretending to be ROM. This provides full speed
operation and permanence during the 10-year life of the battery.
Flash memory
This is non-volatile RAM (NVRAM). In fact, it is really a form of RAM
with a battery installed to provide power during shutdown periods.
Rather like a single chip version of a RAM card.
Memory maps
A microprocessor has a number of address lines that can be used to
access RAM or ROM or other devices within the system. As we saw in
the memory chips, the total memory addressable by a microprocessor
is found by the formula 2n where n is the number of address lines. For
example, an 8-bit microprocessor generally has 16 address lines and
can access 216 or would have 65 536 or 64 bytes of memory. The
Digital Alpha 21064 has 34-bit address lines giving 234 or a little over
17 Gbytes. This memory is shared between the RAMs, ROMs and
other devices, including some for the microprocessor itself to use.
The system designer has to decide in what way the available memory
is to be used. Using the memory map of the 8-bit microprocessor as a
simple example, we start off with a blank space as in Figure 6.21.
When the microprocessor is first supplied with power it will
immediately start following the first program provided. How does it
Figure 6.21
The starting point for a
memory map
81
Introduction to Microprocessors and Microcontrollers
Figure 6.22
A typical small system
memory map
know what program is first? The answer to this is that it goes to a pre-
determined address, which has been built into the microprocessor
during manufacture.
If we assume the startup address is FFFAH, then we must put some
useful information at that address for it to follow. This implies that
some ROM memory must be at the top end of the memory map. Most
provide some extra fast programming ability and this usually requires
that some RAM to be available at the bottom end of the memory
map.
There is nothing else that is allocated to any particular address so any
other RAM and ROM memories can be placed at any position on
the map. The map does not have to be full, indeed it seldom is. The
balance between RAM and ROM depends on the purpose to which the
system is to be put. A control system running a piece of manufacturing
machinery is likely to be predominately ROM whereas a computer
would need significant RAM. A simple memory map is shown in
Figure 6.22.
Sorting out the addresses
This is just an exercise in hex numbers in which a  hex calculator will
prove invaluable. Now, 1 kbyte of memory occupies 210 or 1024
locations, which is 400H in hex. The first section of RAM extends
from: start address + highest RAM address = 0000H to 03FFH so the
highest address in the  Fast instructions section is 03FFH. The User
RAM extends from 0400H to 3FFFH. How many kilobytes of memory
is this?
This is 15 kbytes of memory. This was found by subtracting 0400H
from 4000H to give 3C00H and then dividing this result by 400H, the
82
Registers and memories
hex equivalent of 1 kbyte. The division is best done by calculator.
Remember that the fact that the user-RAM ended at 3FFFH means that
the total number of locations, including the first one in 4000H so it
was more convenient to use the figure of 4000H straight from the
memory map. This is sometimes a little difficult to fully come to terms
with, but a cup of coffee and a slump in an armchair often helps.
In a similar way, the video RAM that holds the information to be
displayed on a monitor can be found by subtracting the lower address
D800H from the higher address E000H to give 800H. Dividing by
400H indicates 2 kbytes of video RAM.
Example
If a 12 kbytes block of ROM started at the address 8000H, what is the
highest address in the ROM?
Since 1 kbyte = 1024, it follows that 12 kbytes = 12 1024 or 12 288
in denary. Converting this to hex gives 3000H. Now, we have to be a
bit careful. If the ROM includes 3000H addresses, they will run from
0 to 2FFFH. Adding the start address of 8000H to the highest address
will give 8000 + 2FFF = AFFFH, which is the highest address in the
ROM.
Quiz time 6
In each case, choose the best option.
1 An SRAM with 12 address pins and 8 data pins
would have:
(a) an organization of 12 8 bits.
(b) approximately 163D 4 M locations.
(c) an organization of 12 8 bits.
(d) a storage capacity of 32 768 bits.
2 A bistable:
(a) can store two bits of information.
(b) is another name for flop-flip.
(c) has a floating output.
(d) is made from several registers.
3 The pin that is most similar to one marked as CS may
be labelled as:
(a) OE.
(b) CAS.
(c) CE.
(d) Vcc.
83
Introduction to Microprocessors and Microcontrollers
4 If, in a memory map, the lowest address of an
8kbyte RAM is 1000H the highest address
would be:
(a) 8192H.
(b) 2FFFH.
(c) 7FFFH.
(d) 3000H.
5 A UVEPROM:
(a) is programmed by ultraviolet light.
(b) loses the data if the power supplies are disconnected.
(c) is a form of non-volatile memory.
(d) is used in a SIMM.
84
7
A microprocessor-based
system
How simple can a microprocessor-based system actually be? It must
obviously contain a microprocessor otherwise it is simply another
electronic circuit. A microprocessor must be programmed. This means
that it must be provided with a series of instructions to be followed.
However we program the microprocessor, the result is a series of
binary numbers that represent the simple step by step instructions to be
followed. These instructions must be stored in some memory. But do
the instructions have to be stored in RAM or ROM? It must be in ROM.
Remember that RAM will hold random data when first switched on
and if our microprocessor was controlling the operation of a dynamite
factory, the last thing that we would want is for it to start following
random instructions at the rate of a million a second!
What determines how fast the microprocessor carries out the
instructions? For the moment we will say that regular pulses of voltage
applied to the microprocessor determine its speed. This voltage pulse
is called a clock pulse.
The clock
A clock circuit controls the operation of the microprocessor. This
produces a series of voltage pulses like a ticking clock. The whole
system runs sequentially, doing the required jobs one after the other.
One step completed for each tick of the clock system.
85
Introduction to Microprocessors and Microcontrollers
The clock circuit can be mostly internal to the microprocessor or it can
be entirely external. It is unlike a normal watch or clock in that the
exact speed is not important. It may be running at a nominal rate of
200 MHz but if it actually ran at 199 MHz or 201 MHz there would be
no great panic. With a modern watch, the equivalent error of seven
minutes a day would mean a trip back to the supplier. In Figure 7.1 a
typical clock pulse is shown.
Figure 7.1
A 200 MHz
clock pulse
The shape of the clock pulse is stipulated in detail in the micro-
processor specification. If it does not stay within the limits stated,
serious problems can occur. Let s assume that two circuits have to
switch at the same time but they operate at slightly different voltages.
In Figure 7.2 the two operating voltages occur at virtually the same
moment due to the very fast rise time. In Figure 7.3 the clock pulse has
a very slow rise and fall time and Circuit 1 will switch before Circuit
2. In this example, the difference is about 2 ns. Whether or not a 2 ns
difference is significant will depend on the circuit being considered.
Figure 7.2
An almost vertical
leading edge
means zero rise
time
86
A microprocessor-based system
Figure 7.3
The rise time is
about 2 ns
All microprocessor technical data will stipulate the maximum rise time
and fall time and between which voltages it is being measured. For
example, the Intel 80386 has a supply voltage of 0 5 V and must have
a rise time (and fall time) of less than 2 ns when measured between
0.8 V and 4.2 V.
If the rise time (written as tr or trise) is not shown, it is normally
measured between 10 and 90% values of the supply voltage. Each
microprocessor has a maximum frequency for the clock pulses and a
minimum value.
Why is there a minimum speed?
Microprocessors have internal registers and storage areas called
capacitors that are like dynamic RAM and need refreshing at intervals.
As the clock speed is reduced, the interval between refreshing gets
longer until the register or capacitor can no longer hang on to the
information and the whole operation collapses. Typically, the mini-
mum clock speed is about a quarter of the maximum speed. The Intel
80386 will run down to 800 kHz.
The first microprocessor, in 1971, was the Intel 4004. It ran at a clock
speed of 0.108 MHz and handled 4 bits at a time. In 1998, the 64-bit
Alpha 21164 runs at 600 MHz, king for a day but will, no doubt, soon
take its place on the museum shelf. (It is 700 MHz now and the ink is
barely dry!)
The most basic system is therefore going to include a microprocessor,
clock and a ROM chip to provide the built-in sequence of instructions.
The only other essential is to have wires or other conductors to
connect the circuit. Figure 7.4 shows the most basic microprocessor-
87
Introduction to Microprocessors and Microcontrollers
Figure 7.4
The most basic
microprocessor-
based system
based system with just the bare essentials. As usual, the power supplies
are not shown.
All microprocessors are connected internally and to the rest of the
system by collections of conductors called buses.
Buses
These conductors are in groups, since many will be going to the same
place for much the same purpose. For example, an 8-bit micro-
processor normally uses 8 connectors to carry the data between the
microprocessor and the memory. It would make diagrams very
complicated if each wire were to be shown separately so we group
them together and refer to them as the data bus. A bus is therefore a
collection of conductors providing a similar function.
In a microprocessor-based system we have three main buses: the data
bus, the address bus and a control bus. The data bus is a two-way bus
carrying data around the system. Information going into the micro-
processor and results coming out. The address bus carries addresses
and is a one-way bus from the microprocessor to the memory or other
devices. The control bus is rather different from the other two. It is a
somewhat looser collection of conductors. If we look at a micro-
processor-based system we can easily see the data and address buses
since they consist of many parallel connections. However, the control
bus is just an association of all the other necessary connections such
as those to the chip select and read/write pins.
Address information, data and control signals have to be carried
around inside the microprocessor as well as in the external system. We
will therefore meet internal as well as external buses.
88
A microprocessor-based system
Input/output circuits
The signal on the data bus has only a very low power level and to be
of use it must be amplified.
The first response was to put a series of amplifiers; one on the end of
each of the connections on the data bus but this was soon
superseded by a more sophisticated chip with more facilities. For
example, if we wanted to send a signal to a printer at 1 ms intervals
it would not be sensible to tie up the main processor with counting
out these time intervals. It would be much better to tell the output
chip to do its own timing and thus release the microprocessor for
more important jobs.
The output devices have become quite complex and now go under a
variety of names:
I/O controller  input/output controller
PIA  programmable interface adapter
VIA  versatile interface adapter
PIO  programmable input/output
PPI  programmable peripheral interface
. . . and many others.
Whatever name is given to the device, they are basically the same and
are essential to any microprocessor-based system. An improved basic
system is shown in Figure 7.5.
Figure 7.5
An input/output chip
has been added
89
Introduction to Microprocessors and Microcontrollers
A practical microprocessor system
Apart from in the most minimal of circuits, some RAM is needed. Even
if the microprocessor-based system is controlling an oven, we still
need the facility to vary the instructions to change the temperature, the
time cycle, the fan speed etc., so some RAM must be added. Some
microprocessors have a small amount of RAM included internally,
enough for this sort of system to work but still quite limited.
If we add some external RAM, the microprocessor is controlling the
operation of three chips: ROM, RAM and I/O. To control the flow of
information it needs to send chip select and read/write information
along the control bus.
Read/write signals tell the RAM and the I/O chip whether they have to
read, i.e. accept information from the data bus or to write information
onto the data bus.
Chip select is the on/off switch for each of the chips and we have to be
very careful to ensure that only one set of information is being
connected to the data bus at one time.
If a ROM chip were to be putting a binary 0 onto one of the data bus
connections and, at the same time, another ROM or a RAM chip was
applying a binary 1, there would be a disagreement between the two
chips. What would happen? It is sad but the likely outcome is a fight
to the finish with one or other of the chips being condemned to the
waste bin.
To prevent this from happening, an address decoder circuit samples
the address bus and selects the appropriate chip. If the microprocessor
wishes to send some data to the RAM chip, it applies a suitable address
to the address bus that is applied to the ROM, RAM and the I/O
controller but there are no problems at the moment since all these
chips are switched off. The address decoder applies the inputs from the
address bus to an array of logic gates that have been organized to
comply with the memory map of the system. The output from the
address decoder then switches the RAM chip on and the ROM and I/O
chips off. The design of the address decoder can be modified to control
any number of external chips in the system. An upgraded system is
shown in Figure 7.6.
How it all works
To demonstrate its operation we can ask it to perform a simple task.
Instruction: Send the number 25H which is in the ROM and store it in
the RAM at address 2500H. This is what happens  follow the action
on Figure 7.6.
1 The microprocessor has to collect the instruction from an address in
ROM. It does this by putting the address onto the address bus.
90
A microprocessor-based system
Figure 7.6
A complete
microprocessor
system
2 The address is applied to the ROM and the RAM as well as the
address decoder. This will not cause any problems because all the
chip selects will be switched off at the moment. When the logic
gates within the address decoder responds to the input from the
address bus the result will be that the ROM is switched on and the
other two are kept off.
3 Switching on the ROM will mean that it takes in the address from
the address bus. Inside the ROM chip, the row and column
decoders activate one of the memory locations and the binary
number stored at that location is placed on the data bus by
switching on the tri-state buffers. As soon as the information is read,
the chip select will switch the ROM chip off.
4 The information which is now on the data bus is read by the
microprocessor. It is an instruction which can be interpreted as  go
to address F600H and read the number that is stored in that
address .
5 In response to this instruction, the microprocessor puts the address
F600H onto the address bus.
91
Introduction to Microprocessors and Microcontrollers
6 The address decoder applies this number to its logic gates and this
results in the chip select of the ROM chip being switched on again.
The ROM chip accepts the address F600H into its row and column
decoders and then puts the number 25H onto the data bus.
7 This number is stored temporarily in the microprocessor.
8 The microprocessor then puts the number 2500H onto the address
bus and the address decoder puts a signal on the chip select of the
RAM chip to switch it on. It then sends a logic 1 on the read/write
line. The RAM is switched on and it is told to read the data on the
data bus. The read/write line goes to the I/O chip as well but again,
this causes no problem because its chip select line is keeping it
switched off.
The number 25 is now safely stored in the RAM chip and will remain
there until it is over-written with new information or the power is
switched off.
Another look at the address decoder
We have seen in Chapter 6 that the number of locations that can be
addressed is 2n where n is the number of address lines. By feeding the
numbers into our calculators we can see that the relationship between
lines and locations is as shown in Table 7.1.
We can also use this table to identify the number of lines needed to
access a known number of address locations. For example, if we
wanted to access 700 locations, we can see that 9 lines could access
512 locations which is too few. Therefore, we would have to go to 10
Table 7.1 Larger memories need more address lines
Number of Number of Number of Number of Number of Number of
address locations address locations address locations
lines lines lines
1 2 13 8k 25 32M
2 4 14 16k 26 64M
3 8 15 32k 27 128M
4 16 16 64k 28 256M
5 32 17 128k 29 512M
6 64 18 256k 30 1024M=1G
7 128 19 512k 31 2G
8 256 20 1024k=1M 32 4G
9 512 21 2M 33 8G
10 1024 = 1k 22 4M 34 16G
11 2k 23 8M 35 32G
12 4k 24 16M 36 64G
92
A microprocessor-based system
lines which would actually give access to 1024 locations. The  real
answer of 9.45 is not sensible because we cannot have 0.45 of a
connecting wire so if 9 is not enough, it will have to be 10.
For those who like to see the calculations, the mathematical result is
given by:
log10 (number of locations)
number of address lines =
log10(2)
Designing a decoding circuit
Let s imagine that we have a microprocessor-based system using eight
memory chips, ROM or RAM it doesn t matter. Each of the chips holds
8 kbytes of memory. From Table 7.1 we can see that an 8 kbytes chip
will require 13 address lines in order to access each of their internal
locations. Assume too, that the microprocessor that we are using has a
16-bit address bus so we have the situation shown in Figure 7.7. The
address lines are numbered from A0 (address line number 0) to A15.
The 13 bits A0 A12 are heading off towards the ROM and RAM chips.
The remaining three address lines, A13 A15, are used by the address
decoder.
Figure 7.7
There are three
 spare address lines
The decoding chip
The decoder circuit can be made from separate logic gates or can be
bought ready-built in a single integrated circuit. For ease of construc-
tion, most designers opt for this choice for the result is smaller,
dissipates less heat and is less expensive (and it works first time). There
is very little to be said for the build-it-yourself approach.
The basic requirements are three input address lines and eight output
lines each connected to one of the chip select pins on a memory chip.
To switch the chips on, the chip select must be taken to a logic 0 voltage.
A logic 1 voltage level will switch the chip off. It is vital, of course, that
only one chip can be switched on at the same time otherwise they will
load competing data onto the data bus and are likely to be destroyed.
The three addresses can result in 23 = 8 different inputs to the logic gates
93
Introduction to Microprocessors and Microcontrollers
Figure 7.8
The operation of
the address
decoder
built into the decoder chip. The internal design ensures that when the
address pins are all at zero, the first output goes to a logic 0 and all the
others remain high. The memory chip to which this first output is
connected is switched on and all the others are on. When the next
combination of inputs 0, 0, 1 is applied, the second memory chip is
switched on and the others are off. The next combination switches on
the next memory chip and so on until the three input wires have
switched on each of the memory chips with a single combination of
addresses (see Figure 7.8). With three inputs and eight outputs, it is
referred to, reasonably enough, as a 3 to 8 decoder.
Table 7.2 looks a lot worse than it really is. It is really just a
summary of the decoder chip outputs. If the microprocessor put
the address C2F1H on the address bus, then in binary it would be:
1100 0010 1111 0001. It has been broken up into groups of four
Table 7.2 The 3 8 decoder can control eight memory chips
Inputs Outputs Results
C B A 0 1 2 3 4 5 6 7
0 0 0 0 1 1 1 1 1 1 1 Chip 0 selected
0 0 1 1 0 1 1 1 1 1 1 Chip 1 selected
0 1 0 1 1 0 1 1 1 1 1 Chip 2 selected
0 1 1 1 1 1 0 1 1 1 1 Chip 3 selected
1 0 0 1 1 1 1 0 1 1 1 Chip 4 selected
1 0 1 1 1 1 1 1 0 1 1 Chip 5 selected
1 1 0 1 1 1 1 1 1 0 1 Chip 6 selected
1 1 1 1 1 1 1 1 1 1 0 Chip 7 selected
94
A microprocessor-based system
Table 7.3 In full decoding, every address line is used
A A A A A A A A A A A A A A A A
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
1 1 0 0 0 0 1 0 1 1 1 1 0 0 0 1
�!�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł
�!�ł�ł�ł�ł�ł
This address is internally decoded
This selects within the memory chip and points
chip 6 to a single memory location
just to make it a little easier to read. The most significant bit, A15, is
on the left-hand end.
In Table 7.3, we can see that 13 out of the 16 address lines go to the
memory chip and the other three are fed to the decoder chip. The three
lines going to the decoder chip carry the data 1 1 0. We can see that
the values C = 1, B = 1 and A = 0 occur near the bottom of the table.
These values result in Chip 6 receiving a logic 0 value and thus being
selected for use. All other chips are deselected by the logic 1.
Full and partial decoding
Full decoding
In the above example, the 8 kbyte memory chips used 13 address lines
and the decoder used three. This makes a total of 16 lines used out of
a 16-bit address bus. There are no unused lines and this is referred to
as  full decoding .
Partial decoding
Now let s make a small change. The memory chips used are 4 kbyte
each rather than 8 kbyte. What effect would this have?
The first result would be that the number of address lines going to the
chips would be reduced to 12. There are still only eight chips to be
selected so a 3 8 decoder is enough. So what have we got now?
Twelve address lines to the chips and three to the decoder and one left
over and unused. If nothing is connected to this line, then it cannot
matter what voltage it carries (see Table 7.4).
We will look at our previous address C2F1H. If it happened to go to a
value of 1, the address would change from:
1 1 0 0 0 0 1 0 1 1 1 1 0 0 0 1 (C2F1H)
to
1 1 0 1 0 0 1 0 1 1 1 1 0 0 0 1 (D2F1H).
95
Introduction to Microprocessors and Microcontrollers
Table 7.4 One address line is unused
A A A A A A A A A A A A A A A A
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
1 1 0 X 0 0 1 0 1 1 1 1 0 0 0 1
�!�ł�ł�ł�ł�ł �!�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł
3 lines for 12 lines to the memory
decoding
This line is unused so it
can have a value of
0 or 1
We now have two numbers that can be placed on the address bus
which will result in access to the same memory location since all the
bits that are actually used are identical. If we instructed the
microprocessor to store some information in the address C2F1H and
then to recover the information from address D2F1H, we would get
the same information again. The address D2F1H is referred to as a
ghost address or an image address. It is important to appreciate that
ghost or image addresses have no effect at all on the operation of the
microprocessor system. They are merely alternative names for a single
address. Incomplete or partial decoding always gives rise to image
addresses, their number and their addresses are easily worked out. In
technospeak, we say that partial decoding results in more than one
software addresses pointing to the same hardware address.
A worked example
The eight memory chips were now changed to 1 kbyte chips. Some
data is stored in the address 4000H. Find (a) how many image
addresses will occur and (b) the image addresses.
(a) A 1 kbyte memory chip would have 10 address lines. This was
taken from Table 7.1 and the decoder chip still needs three inputs.
The 16-bit address we were given, 4000H would result in three
unused lines as in Table 7.5. These three binary digits can take on
the values 000, 001, 010, 011, 100, 101, 110 and 111 which results
in eight different values. This could have been done the slick way
by saying 23 = 8. Putting these eight numbers into the address will
result in eight different addresses.
One real address and seven ghosts or images. But which is the
ghost and which is the real one? It doesn t matter. We can assume
96
A microprocessor-based system
Table 7.5 There are now three unused address lines
A A A A A A A A A A A A A A A A
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0 1 0 1 1 0 0 0 1 0 1 0 0 1 0 1
�!�ł�ł�ł�ł�ł ę! ę! ę! �!�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł�ł
To the decoder ćł ćł ćł To the 1 kbye memory chip
ćł ćł ćł
Three
unused
lines
anything we like since they all point to the same physical memory.
Having said this, most people seem to opt for the lowest address as
the  real one.
(b) Now, to find the actual ghost addresses, all we have to do is to feed
in all the binary options, 000, 001 etc. into the  real address to
generate each of the ghost addresses. This is shown in Table 7.6.
The resulting addresses are 4000H, 4400H, 4800H, 4C00H,
5000H, 5400H, 5800H and 5C00H. Strictly speaking, we should,
perhaps, only give the last seven addresses since the question
asked for the image addresses and the first one is actually the real
address. Notice how the addresses increase in a definite pattern. It
always works out this way.
Image addresses and the memory map
You may remember the memory maps that we looked at in the last
chapter. They showed the addresses taken by the various memory
Table 7.6 Generating the image addresses
A A A A A A A A A A A A A A A A Address
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 4000
0 1 0 0 0 1 0 0 0 0 0 0 0 0 0 0 4400
0 1 0 0 1 0 0 0 0 0 0 0 0 0 0 0 4800
0 1 0 0 1 1 0 0 0 0 0 0 0 0 0 0 4C00
0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 5000
0 1 0 1 0 1 0 0 0 0 0 0 0 0 0 0 5400
0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0 5800
0 1 0 1 1 1 0 0 0 0 0 0 0 0 0 0 5C00
97
Introduction to Microprocessors and Microcontrollers
devices and the unused addresses in between them. When we have
partial decoding, it gives rise to image addresses. Now, if we put these
image addresses on the memory map a curious thing occurs. Every
image address always falls in one of the unused areas on the map so they
will never cause problems by clashing with an existing memory chip.
Quiz time 7
In each case, choose the best option.
1 The Digital Alpha 21064 microprocessor has a 34-bit
address bus which can access a memory of:
(a) 64 Gbytes.
(b) 64 Mbytes.
(c) 16 Gbytes.
(d) 160 Mbytes.
2 The data bus:
(a) is bi-directional.
(b) consists of eight conductors.
(c) can be used to carry data to RAM and ROM memory chips.
(d) is connected to the chip select pins.
3 A 16-bit address bus is carrying the address 4567H
and is partially decoded with lines A15 and A13
being unused. Which one of these addresses would
access a different hardware location:
(a) E567H.
(b) 4567H.
(c) 6567H.
(d) 8567H.
4 Which one of the following is NOT essential in a
microprocessor-based system:
(a) an address bus.
(b) ROM.
(c) a clock signal.
(d) RAM.
5 Image addresses are:
(a) also called ghost addresses.
(b) due to several hardware addresses pointing to the same
software address.
(c) the same as partial addresses.
(d) caused by full decoding.
98
8
A typical 8-bit
microprocessor
The 8-bit microprocessor is described in some detail to provide a
foundation upon which others can be built since the story of
microprocessors is one of evolution rather than  bolts out of the
blue .
An 8-bit microprocessor  the Z80180
This microprocessor is the modern version of an old favorite called the
Z80 which was developed in 1978 which was itself just an improved
version of the Intel 8080. There are many similarities since some of the
engineers that designed the 8080 left Intel and went to work for Zilog
to build the Z80 which proved to be one of the most popular and
longest living microprocessors  it is still widely used even in mobile
phones.
When Zilog developed the Z80180, they were naturally anxious to
hold on to their previous customers by making the new version
compatible with the earlier Z80. This allows customers an easy and
inexpensive way of updating their system without the high design costs
of starting afresh with a completely different device.
99
Introduction to Microprocessors and Microcontrollers
The Z80180 can run any programs that were written for the Z80 as
well as adding some new features. Technically, this is referred to as
providing full backwards compatibility.
The X in Z8X180
If we were to go to a Ford dealer to buy a truck, they will offer us a
whole series of them, all of which are basically the same but with a
choice of engine sizes, gearboxes, seating arrangements and many
other options. In this way, they can please the maximum number of
customers without incurring significant redesign costs.
Microprocessors are much the same. They start with a basic design
and similar versions are indicated by a slight change in the type
number. So far, Zilog have produced the Z80180, Z8S180, and the
Z8L180. By comparing the type numbers, we can see that they only
differ in the third number or letter and by replacing this letter by X we
can refer to a generalized type as the Z8X180. This use of X is in
general use throughout the industry. The group of microprocessors are
referred to as a family.
Despite the push from the computer industry for faster and faster
microprocessors, there are many purposes for which small, slow and
simple microprocessors is ideal. Billions of 4- and 8-bit micro-
processors and microcontrollers are whirring away embedded inside
things like microwave ovens, printers and instruments. Most of us
share our homes with about fifty of these devices without being aware
of their existence. They massively outnumber the well publicized
high-speed computer microprocessors.
Inside of the central processing unit (CPU)
Figure 8.1 shows the main parts of the Z80180 CPU. It consists of a
number of different registers which store or make use of the data when
Figure 8.1
The central
processing unit
(CPU)
100
A typical 8-bit microprocessor
carrying out the instructions in the program. In order to maintain
backward compatibility, most of the registers use the same system of
labelling with letters to keep it familiar to anyone who has used the
Z80.
Instruction register
The instruction register is just a small memory able to store 8 bits, or 1
byte of information. This information is an instruction for the
microprocessor to carry out. The information is latched into the
instruction register to release the internal data bus for other purposes. It
doesn t do anything with the binary input  it just remembers what it is.
Instruction decoder
The instruction decoder is the part of the microprocessor that is able to
actually carry out an instruction. Its first step is to identify which
instruction that has been entered. It does this by comparing its binary
code with an internally stored list. Once it has located the instruction
it follows a built-in program called a microprogram. This micropro-
gram is designed into the microprocessor by the manufacturer and
details all the necessary steps to complete any instruction of which it
is capable. This is the commercially sensitive and critical part of the
microprocessor.
When the Z80180 is given a job to do, it must be given an instruction.
An instruction is in the form of an 8-bit binary number. We will be
coming back to this in a little while.
Arithmetic and logic unit (ALU)
This is a simple pocket calculator. It can add, subtract, multiply, divide,
and do various tricks with logic gates AND, OR, XOR etc. Compared
with the average scientific calculator, it is pretty poor.
CPU register banks
Technical information about a microprocessor will always include a
diagram or listing of the internal registers. Registers are small
memories, of between 8 and 128 bits each, depending on the
microprocessor being considered. In the Z80180, they are all 8 or 16
bits in size.
Each microprocessor has its own collection of registers so it is essential
to read the technical information carefully to see what they do.
There are  general purpose registers that are under the control of the
user and can be used for a variety of temporary storage purposes.
101
Introduction to Microprocessors and Microcontrollers
There are also special purpose registers that are dedicated to particular
functions, like the instruction register, for instance.
The Z80180 has sixteen general-purpose registers, and six for special
purposes. Figure 8.2 shows the registers.
Figure 8.2
Z80X80
internal
registers
We will concentrate on the upper two registers for the moment. The
Main register set and the alternate register set are identical except for
the small  against the letters. This  is called  prime so D would be
read as  dee prime . The prime is only there to distinguish between the
two sets of registers.
Why have two sets? Having two sets allows the programmer to use the
main set of registers while the prime registers can be loaded with other
information ready for immediate use when required.
Imagine the microprocessor is busily controlling a printing machine
when the fire alarm is activated. When the fire alarm signal reaches the
microprocessor, it immediately abandons the printing program and
starts to run the  Fire Alarm program alerting the fire fighters,
evaluating the building etc. Some of the information for running this
program could be stored in the spare set of registers. When the alarm
program has been completed, the microprocessor calmly switches
back to its main register set, and continues its printing work until it
melts in the fire.
102
A typical 8-bit microprocessor
The accumulator
The programmer can use it at any time to store an 8-bit binary number.
It can also store numbers to be used in arithmetic operations or for
logic operations like AND, OR etc. The results of such calculations are
put back into the accumulator after completion. Being only an 8-bit
register, it can only hold one byte at a time so any previous data stored
in this register will be overwritten as soon as anything else is stored.
The flag register
This is an 8-bit register but it is unusual in that each bit stored is quite
independent of all the others. In all other registers, each bit is just part
of a single binary value so each bit has a numerical value.
A status register or flag register is like a window for us to see into the
workings of the microprocessor. It s rather like a simple communica-
tion system. For example, it allows us to say to the microprocessor,  if
you see a negative number during your calculation, just let me
know .
We do not have to take any notice of the flags, they are just indicators
that we may take note of or ignore, just as we wish  rather like a
thermometer on the wall.
Each flag is identified by a letter and these are shown in Figure 8.3. You
will see that two of the bits, 3 and 5, are marked with an X to show that
they are not used. These bits were left spare for later development
(which has never happened).
Figure 8.3
The Z80180 flag
register
A note: In microprocessors, computers and electronics generally,
something that is marked with an X is not used, and so we don t care
what the voltage or binary value is.
Another note: a flag is said to be  set when its value is 1 and is
 cleared to 0.
103
Introduction to Microprocessors and Microcontrollers
Sign flag (S)
The S flag is just a copy of the bit 7 of the accumulator. A negative
number has a 1 in bit 7 and a positive number has a 0 in bit 7 so this
flag indicates the sign of the number. You may remember that signed
magnitude numbers use a 1 to indicate a negative number and 0 to
indicate a positive number. Likewise a negative number expressed in
two s complement form will have its left-hand bit as a 1. The number
zero is treated as a positive number so we cannot use the S flag to spot
a zero result. We do this by employing a special  zero flag as we will
see in a moment.
Zero flag (Z)
The Z flag spends all its time watching for a result of zero.
You may remember that when we were looking at the uses of an XOR
gate, we used this gate to check the code number in a cash dispenser.
When the entered value and the card number were the same, it
allowed cash to be withdrawn. What actually happened was that the
two numbers were compared and if they were the same, then the result
would be zero and the Z flag would spring into action. It  sets or
changes to a binary 1 if it sees a zero result and stays at binary 0 at all
other times.
Two things to be careful about. The Z flag only goes to a one state if all
bits in the latest result are zero. Also, be careful about the way round:
result 0 makes the Z flag = 1; result not zero, Z flag = 0.
All these results would give a Z flag value of zero:
0100 0000
1111 1111
0000 0001
1001 1010
Only a result of 0000 0000 would make the Z flag go to a binary 1.
Add/subtract flag (N)
The N flag is just there to tell us whether the last arithmetic instruction
was  add or  subtract . N = 0 for add, N = 1 for subtract. Not very
exciting.
Carry flag (C) and the half-carry flag (H)
When addition is carried out, it sometimes results in a bit being carried
over to the next column. The C flag copies the value of the carry from
bit 7 and the H flag records the carry from bit 3 into bit 4 during
additions. It also reflects the value of the  borrow in subtractions.
104
A typical 8-bit microprocessor
Here is an example of an addition showing the C and H flags.
0 1 1 0 1 0 0 1
1 1 0 0 0 0 1 1
0 0 1 0 1 1 0 0
11 1
0 + 1 + the carry = 0
No carry from this
and a carry of 1 so
column so H flag = 0
C flag = 1
Parity/overflow flag (P/V)
This is used for two separate purposes.
The  V in the title refers to oVerflow in arithmetic calculations. Some
combinations of numbers can be misinterpreted and give an appar-
ently incorrect answer, as we will see.
When the flag spots a possible error it is set, when no error is likely, it
is cleared.
Here is an example where we could see a problem.
We are going to add two positive numbers +96 and +66 so even if
we can t guess the result, we do at least know that it is a positive
number.
0 1 1 0 0 0 0 0 = 96
0 1 0 0 0 0 1 0 = 66 +
1 0 1 0 0 0 1 0 =  34??
1
The sign bit indicates a
negative number
In this example, we have added two numbers that start with zero and
are therefore positive and the result starts with a one, which is a
negative number so the P/V flag will be set.
An easy way to check for a possible error is to look at the carry into bit
7 and the carry out of bit 7.
105
Introduction to Microprocessors and Microcontrollers
The rule is:
Carry in and carry out
or = No error so P/V flag = 0
No carry in and no carry out
In our example, there was a 1 carried into bit 7 from the previous
column but there was no bit carried out from bit 7. This does not fit
into the rule above so the P/V flag will be set to 1 indicating a possible
error in the result.
Its second purpose is to operate in its parity mode.
In this mode, it checks a byte of data and counts the number of 1
states, if the total is an even number, the P/V flag is set and if odd, it is
cleared.
So the byte 10110101 would mean P/V = 0 since the number 1 occurs
5 times, which is an odd number. And 10010110 would result in P/V
= 1 because there are four occasions when the number 1 occurs and
4 is an even number.
This flag operates in the P or V mode depending on the instruction
being carried out at the time.
We will look at parity in more detail in Chapter 17.
The general-purpose registers
The general-purpose registers are all 8-bit registers but if we like, we
can use them two at a time as 16-bit registers. When pairing them up,
our choice is restricted to the way suggested by Figure 8.2. We can
combine BC, DE or HL but it s not a free choice, we cannot choose any
two such as B and L. We can use a pair like BC as a 16-bit register and,
at the same time, use D/E/H/L as separate 8-bit registers. As usual, the
alternate register set behaves in exactly the same manner.
They have labelled the first four as B, C, D and E, so it may seem a little
odd to use H and L for the last two.
The reason for this is that these registers are also used to keep track of
memory addresses. The Z8018X has a 16-bit address bus and so
requires a 16-bit register to be able to store a full address. The H and
L stand for High and Low bytes of the address so if we wanted to store
the address 2684H, we would put 84 in the L register and 26 in the H
register, using binary of course. As well as being used to hold an
address, the H and L registers can still be used for any other purpose
that we want, just like B,C, D and E.
106
A typical 8-bit microprocessor
Special-purpose registers
Program counter (PC)
A program is a list of instructions for the microprocessor to carry out.
Before use, they must be stored in some ROM or RAM. Let s assume
that we used addresses starting from 6400H. To run the program we
must tell the microprocessor to  go from 6400H.
What we are actually doing is loading the address 6400H into the
program counter and the microprocessor starts from there. Once it has
completed the instruction in 6400H, it goes to the next address 6401H
and then 6402H etc until it reaches the end of the program.
The purpose of the program counter is to keep track of the address that
is going to be used next.
Stack pointer (SP)
If someone gave us a telephone number to remember, we would be
likely to reach for a scrap of paper and a pencil to write it down. Our
note may look like Figure 8.4.
Figure 8.4
A number to
remember
If we were then given another couple of numbers, we are likely to jot
them down, in order, under the first one as in Figure 8.5.
Figure 8.5
A few more numbers
107
Introduction to Microprocessors and Microcontrollers
We could read them back in order by reading the bottom one first,
then the next and finally the top one. The first one to be entered was
the last one to come out.
The microprocessor could do something similar by storing information
in a series of 16-bit memory locations called a  stack . The stack is
loaded in order and then unloaded starting from the last number stored
and working back to the top of the stack. The first number that was
stored would be retrieved last and for this reason it would be called a
 first-in, last-out method or FILO. For maximum confusion, this can
also be called a LIFO system that, of course, means exactly the same.
Have a think about it.
Inside the microprocessor, a series of RAM locations are reserved to be
used as a stack and an address counter must be employed to keep
track of what address of the stack is to be used next. This counter is
called a stack pointer since it  points at the next address to be used.
The stack is generally used by the microprocessor to store data on a
very temporary basis. We are allowed to use it but the microprocessor
takes priority and doesn t know that we have been fiddling with it. For
example, if the microprocessor had stored three bits of data in order as
in Figure 8.6(a) and we put one piece of our data on the end as in
Figure 8.6(b), there would now be data in four locations. However, the
microprocessor would not be aware of this. When the microprocessor
wished to retrieve its data, it would unload three bytes and
accidentally get the wrong one as in Figure 8.6(c).
Figure 8.6
Using the stack
108
A typical 8-bit microprocessor
The moral of this story is leave the stack alone  or be very careful! The
technical data will always give you sufficient information to be able to
know whether or not the microprocessor will be using the stack but it
still takes a lot of working through to be sure.
Index registers
We have two index registers, one called X and the other called Y. They
both perform the same function.
An index is used in situations in which we wish to perform a sequence
of similar tasks one after the other. Perhaps to use data stored in a series
of memory locations. The 16-bit content of the index register can be
added to the contents of the program counter (PC) to produce a new
address.
As an example, let s assume that we are running a program which
after using address 2600H we would like it to use some data stored in
address 3800H. We could do this by loading the 16-bit number
1200H into the X register and instruct the microprocessor to go to the
address written as PC + IX (program counter and index X). In this
case, the microprocessor goes to address 2600H + 1200H = 3800H
to retrieve the data to be used. This jump from 2600H to 3800H is
called an offset or we may say that the index X register has provided
an offset of 1200H. In this example, index register Y could have been
used equally well.
Index registers are often used to input data previously entered into a
table or from another part of the memory. The user of a program may
be asked to type in a number. This number would be entered in RAM
but the program that is going to use this data is stored in ROM. A
suitable offset in one of the index registers could shift the address
sufficiently to bring it into the RAM area of the memory map.
These registers are also used in situations where the program seeks a
response from the user. The screen may show:
PRINTING
Enter the number of copies
to print
We could implement this by storing the response in one of the index
registers and, as the printer performs each copy, the number stored is
decreased by one (decremented) until it reaches zero. Every time that
the counter is decremented, we instruct the microprocessor to check
109
Introduction to Microprocessors and Microcontrollers
the state of the Z flag. When the count finally reaches zero, the Z flag
will be set and the printer can be stopped.
R counter (R)
This is a simple counter in which the lower seven bits are used to
count the number of instructions that have been carried out by the
microprocessor while it has been running the present program. It is
reset to zero whenever the micro is restarted.
Figure 8.7 shows the remaining parts of a microprocessor. All these
parts are inside the single block marked  microprocessor (�P) in Figure
7.4. These include all the facilities for connecting the device to
external circuits and a few other essentials.
Figure 8.7
The Z80180
microprocessor
Data buffers
The data buffer is an 8-bit register to store the information being
provided by the external data bus. Once the buffer stores the binary
information then tri-state buffers can lock-in the information dis-
connecting the external data bus so it can be used for carrying other
data. This process is called  latching . As a general rule, all inputs to a
chip from a bus are latched in. This is because the buses take time to
set up new voltages on their lines and need to get started on this job
as soon as possible.
110
A typical 8-bit microprocessor
The address and data buses
As with all microprocessors, there are three buses, the address, data
and control. As we saw in the previous chapter, the control bus is a
loose collection of connections that send signals around the system to
make connections and control the operation of each area as necessary.
Here we will concentrate on the address and data buses in the
Z80180.
The Z80180 has a (sort of)16-bit address bus and an 8-bit data bus.
In the smaller microprocessors, it was usual practice to make the
address bus twice the width of the data bus but there is no reason why
this has to be the case. The choice of address bus width will depend
on the anticipated size of the memory that needs to be addressed in the
final designs. Unusually, in this microprocessor there are two
conflicting requirements: it has to remain compatible with the 16-bit
address bus of the Z80 but we would like to be able to address 1 MB
which requires 20 address lines.
These requirements are met by the block shown as MMU or memory
management unit.
Memory management unit (MMU)
This circuit includes an 8-bit register that holds address information
that can be controlled by the software being used. These 8 bits are
combined with the top four address lines, A12 A15, of the address
bus. The lower half of these 8 bits are added to the top 4 bits of the
address bus and the upper 4 bits are used to expand the useable
memory by adding the four extra address lines, A16 A19, to allow a
total of twenty lines to be addressed  see note below. The process is
shown in Figure 8.8.
The Z80180 family is manufactured in three different packages. The
original 40 pins of the old Z80 has increased to 64 pins in the dual-in-
line (d.i.l.) package similar to that shown at the top of Figure 1.6. They
also make a 68 pin plastic leaded chip carrier (PLCC) version which is
just like the square package in Figure 1.6. Finally, there is an 80 pin
surface mount type.
Figure 8.8
Expanding the
address bus
111
Introduction to Microprocessors and Microcontrollers
Surface mount devices do not have pins that go through holes in the
printed circuit board but have connectors that come out horizontally
and then soldered onto the surface of the board. This method allows
significant space savings.
Note
The smaller number of pins on the d.i.l. layout has limited the number
of address pins to nineteen and therefore the maximum memory that
can be accessed is now 219 or 512k (really 524288 since a  k in this
case is taken as 1024 as we met in Chapter 2).
Address buffers
These are tri-state buffers just like the data buffers except they are one-
way devices. The microprocessor sends addresses out along the
address bus but no address information can come in this way. If we
need to send an address into the microprocessor then we are loading
information and all information whatever it is goes into the data bus
which, as we have seen, can send any data out to the external circuits
or accept any data into the microprocessor.
Clock generator
As we saw in Chapter 7, a microprocessor needs a square wave signal
to keep all the internal operations in step otherwise it will all end in
chaos with data and instructions moving at the wrong times and
getting jumbled up.
In this particular microprocessor the clock speed can be set to values
between 6 MHz and 33 MHz. The clock signal originates from either a
crystal or an external signal source  but never at the same time. Using
an external signal can be useful where the microprocessor is used as
part of a larger installation and this would allow the microprocessor
timing to be governed by the surrounding circuitry.
There are three nice things about increasing the frequency of a crystal:
they get smaller, lighter and cheaper. The clock circuitry includes a
divide-by-two circuit to allow the use of a double-frequency crystal
with the above-mentioned benefits.
Interrupts
You may remember our sad little story of our microprocessor-based
system controlling the printer while all around the office was burning.
It stopped its main program and went off to phone the fire services,
alert the maintenance staff, activate sprinklers etc.
112
A typical 8-bit microprocessor
Fire is not the only hazard our little friend can safeguard us from. It
could warn for other things like the paper running out in the printer or
data corruption on the telephone cable.
Now, we would not want it to send for more paper to deal with a
possible problem with the telephone cable so the microprocessor
needs to be told what the problem is and what to do about it.
The different programs for each of these problems are stored in a group
of addresses in a ROM chip. As an example, we could load the
programs at these addresses:
0800 0855H = paper supplies
0870 08A8H = telephone data.
Both of these programs have 08 as the high byte of the address. This
value would be stored in the interrupt vector register. The low bytes 00
and 70 are supplied by the sensing device. As soon as the telephone
data is corrupted it is noticed by a sensor, and it sends a signal to
interrupt the microprocessor together with the 70H.
It then combines the 08H from the I register with the 70H from the
external device and puts it into the program counter. The micro-
processor program then switches to address 0870H and calls the
telephone maintenance engineer.
When the microprocessor is interrupted, it stores information inter-
nally about what it was doing at the time of the interrupt so that when
the interrupt is dealt with it can return to its previous task.
Interrupt priorities
Not all problems are treated equally, by us or by a microprocessor. It
is unlikely that we would ever meet a sentence like:  I have forgotten
to put any sugar in the coffee  I ll go and get some  and I have also
noticed that your house is on fire .
As with all other microprocessor, Z80180 interrupts are partly
generated by external circuits and some result from internal sources.
The external ones can usually be blocked or  masked so we can tell
the microprocessor to ignore them and all interrupts are placed in
order of priority so multiple interrupts are prioritized.
In the case of the Z80180, an unrecognized instruction code is given
top priority to prevent any random operation due to corruption during
programming or transmission. This is called a TRAP.
After this comes a single non-maskable interrupt or NMI. This is used
for critical situations that must interrupt any other program that is
running.
113
Introduction to Microprocessors and Microcontrollers
Then follows three levels of external but preventable (maskable)
interrupts. If we don t want the program interrupted, all we have to do
is to insert a  don t interrupt code into the software. Some documenta-
tion refers to this type of interrupts as INT0, INT1, INT2, where the
figure show the priority whereas as others use IRQ to stand for
Interrupt ReQuest.
The remaining seven levels refer to internal interrupts generated by
interrupt control registers and internal circuitry may need to interrupt
the program for a moment in order to perform some other task.
There will be a little more on interrupts in Chapter 17.
Power saving
The power consumed by a microprocessor is mainly the result of
internal activity so the more we make it do, the more power it uses.
Changing the clock speed from 6 MHz to 33 MHz nearly doubles the
power requirement.
We can add the  sleep instruction to the program and this has the
effect of stopping the CPU clock and the data and address buses are
disconnected. To wake the CPU up, we apply a signal to one of the
interrupt inputs or activate the reset circuit by holding the voltage on
the reset pin low.
We can also switch off the input/output circuitry on the micro-
processor putting it into a  system stop mode.
The Z8X180 family has three members: Z80180, Z8S180 and the
Z8L180. The S version operates with a power supply of 5 volts and the
L version supply is reduced to 3.3 volts.
The effect on the power consumption of switching between normal
operation and  system stop mode is shown in Table 8.1.
Bus state controller
In a system, the microprocessor is connected to all the surrounding
circuits by a series of connections called the system bus. Sometimes
Table 8.1
Normal operation  System Stop mode
Z80180 100 mW 25 mW
Z8S180 90 mW 15 mW
Z8L180 60 mW 6 mW
114
A typical 8-bit microprocessor
these devices may wish to send data along the system bus and the bus
state controller ensures that we don t have multiple devices trying to
send data along the same connections at the same time.
Direct memory access (DMA) controller
As the name may suggest, this circuit provides direct access to the
memory without using the central processing unit. The DMA can
provide high-speed transfer of data from one part of the memory to
another. It can also pass data directly to and from the memory and
external devices. This provides significant improvements in operating
speed of the whole system.
Dynamic memory refresh
Do you remember that the problem with dynamic memories was the
constant refreshing that was needed to keep the RAM data intact?
Well, an internal register is used to handle the refreshing process for
us. It fits in the job between instructions and does not slow the
microprocessor in any way and neither the programmer nor the user is
aware that it is continuing in the background. Some microprocessors
do not have this register and an external chip is added to the system to
perform the refreshing. Either way, it has no obvious effect on the
operation of the system.
Wait states
To make it easier to send information to relatively slow external
devices the microprocessor is able to insert  wait states which can
insert more time into its bus cycle timing. They can be programmed in
by the software being used or internally by a wait state generator.
Serial inputs and outputs
To move data in or out in serial mode in which the stream of data is
applied to a single input connection one bit after another we are given
a choice of two options.
First is a clocked serial input/output (CSIO). This is a simple high-speed
data connection to another microprocessor that is capable of sending
and receiving data, though not at the same time. The transmission is
synchronized to the microprocessor clock.
There are also two asynchronous serial communications interfaces
(ASCI). These provide two other data connections that can be
programmed to select the required speed of transmission and provide
two-way transmission.
115
Introduction to Microprocessors and Microcontrollers
How the system works
In the beginning
After the power supplies are first switched on, there is a short delay
built in to allow the voltages to settle and for the clock to start. This
delay is produced by a circuit similar to that shown in Figure 8.9.
Figure 8.9
The ON/OFF switch
The circuit uses a capacitor. A capacitor is a device designed to store
electricity rather like a bucket can be filled with water.
When the micro system is switched off, the capacitor has a short circuit
across it and the current that is flowing through the resistor bypasses
the capacitor hence there is no electricity stored and hence there is no
voltage across it. The same effect is achieved by holding the reset pin
at zero volts for a time equivalent to at least six clock cycles.
Then we switch on and the current flowing through the resistor now
accumulates in the capacitor and the voltage starts to increase. The
voltage grows in the way shown in Figure 8.10 and after a short period
of time, less than a microsecond, the voltage reaches two volts, which
is enough to switch the microprocessor on.
The clock starts ticking and the microprocessor follows a sequence of
steps called a start-up microprogram that was built into the micro-
processor by the manufacturer.
It performs some internal tests and similar housekeeping jobs and then
puts an address on the address bus. This address is, reasonably
enough, called the startup address and is again fixed by the
manufacturer. In the Z80180 the startup address happens to be 0000H
and so this part of the memory map must contain some ROM to hold
the start-up program.
116
A typical 8-bit microprocessor
Figure 8.10
Generating a short
delay when
switching on
Back at Figure 6.22 we saw a typical memory map in which the start-
up program was held in the high end of the memory. The Z80180
would require a quite different map and this indicates yet another
incompatibility between microprocessors.
The first instruction
The startup address is read by the address decoder. The decoder then
applies a chip select signal on the Control bus. This signal then selects
a ROM chip. All other chips ignore the signal since they have not been
selected. The address enters the ROM chip and the row and address
decoders access a memory cell. The contents of that cell are put on the
data bus to be read by the microprocessor.
The second read
The microprocessor sends out the next address onto the address bus.
The address decoder will activate the ROM chip again. The ROM chip
will put some more data on the data bus, which will again be read by
the microprocessor.
What does the microprocessor do with all this data?
If the first read of the ROM resulted in the data C0H and the second
read produced 86H, the microprocessor combines the two to produce
a 16-bit address, C086H. Remember that all this will be in binary  the
use of hex is just to help us see what is happening.
The microprocessor places this new address C086H on the address
bus. The choice of C086H is not made by the microprocessor designer.
117
Introduction to Microprocessors and Microcontrollers
This number is chosen by the system designer  that is, the person that
incorporates the microprocessor into a microsystem.
Then what?
The address, C086H in our example, accesses a ROM chip, which
sends a binary number back to the microprocessor along the data bus.
Inside the microprocessor, this number is interpreted as an instruction.
Comparing the incoming number with an internal list of built-in
control codes discovers exactly what the instruction is. This is all
performed by the micro-program.
What happens next will depend on what the instruction was.
Why?
Why was it an instruction? Because the microprocessor said so!
Microprocessors assume that the first binary number that arrives
represents an instruction so if we wanted to give it the instruction ADD
25H then the binary code meaning ADD will go in first, followed by
the data to be used, in this case 25H.
What if we made a mistake and put the 25 in first, followed by the
binary code for ADD in our program?
The microprocessor would interpret the 25 as an instruction  which
could mean anything at all, or nothing. If this mystery instruction
needed a number, it would use the binary equivalent of our ADD input
 which again could be anything. If the false instruction did not need
a number, then ADD instruction would be correctly read as an ADD
instruction but it would then take the next available binary input as the
number to be added. Our microprocessor has now carried out an
incorrect instruction using incorrect data and the program could do
almost anything. The whole program has got out of step and may do
something quite unexpected. Not much fun in our dynamite factory.
The address being used at any time is known to the microprocessor by
referring to the current value in the program counter, which is
increased by one every time an instruction or some data is used.
The fetch execute cycle
This is the order of operations by a microprocessor and is the cause of
all the confusion in the last paragraph.
The microprocessor applies no intelligence at all. It follows the pattern
shown in Figure 8.11 regardless of whether it is following the program
or it has been fed with a program with an error in it and is now carrying
out a totally useless set of random instructions.
118
A typical 8-bit microprocessor
Figure 8.11
The fetch execute
cycle
It will follow our instructions so don t blame the microprocessor  it s
up to us to feed it with something sensible. Always remember GIGO 
garbage in, garbage out.
As we have seen, there is nothing inherently different between an
instruction and data. They are both binary numbers and the
interpretation is only a matter of what the microprocessor is expecting
at that particular time.
Quiz time 8
In each case, choose the best option.
1 The stack is:
(a) an abbreviation for stack pointer.
(b) a series of RAM locations that can be used by the micro-
processor to store data.
(c) a collection of programs.
(d) a chimney.
2 A CPU:
(a) is an essential part of any microprocessor.
(b) is an abbreviation for computer processing unit.
(c) can contain more than one MPU.
(d) is a function of a register.
119
Introduction to Microprocessors and Microcontrollers
3 Adding the binary numbers 1100 1100 to 0010
1001 within a Z80180 microprocessor would result
in C and H flags being in the condition:
(a) C clear and H clear.
(b) C clear and H set.
(c) C set and H clear.
(d) C set and H set.
4 The interrupt vector register (I) in the Z80180
microprocessor is used to store the:
(a) high byte of the interrupt address.
(b) start up address for the microprocessor.
(c) low byte of the interrupt address.
(d) stack pointer address.
5 The fetch execute cycle:
(a) works in hexadecimal.
(b) assumes the second, fourth, sixth etc. inputs are data.
(c) assumes the first input is an instruction.
(d) is a system used by the Instruction register to channel
information to the correct part of the microprocessor.
120
9
Programming  using
machine code and
assembly
We can use a microprocessor as part of a computer or as part of a
dynamite process controller and the only essential difference is in the
instructions that it is given.
Since the microprocessor has no intelligence at all, it relies entirely on
following a sequence of instructions as we discussed in the fetch
execute cycle.
If you were sitting in a lecture theatre and the speaker said,  We ll
finish now , you would know that it was time to pick up your bits and
pieces and leave the room. Those words were not the only possibility,
other instructions would have served the same purpose like,  Right,
that s it, thank you ;  We ll break here ;  It seems a good time for a
break ;  We ll stop at this point and continue at the next session , and
many other variations. Teachers can clear a whole classroom instantly
just by looking at their watch and saying,  Well, . . . . There are literally
dozens of ways of telling people that it is time to leave a room even
before resorting to the less polite possibilities.
Microprocessors, on the other hand, have nothing like this degree of
flexibility, in fact they have almost no flexibility at all. It is very
frustrating, but we do not share any common language with a
microprocessor (Figure 9.1). Each microprocessor has a built-in list of
121
Introduction to Microprocessors and Microcontrollers
Figure 9.1
A small
communication
problem
instructions that it can understand. This list is called its  instruction set
and may consist of about a hundred or so instructions which must be
put together in the right order to carry out the function required. This
is the job of the programmer and is similar to a builder, constructing a
house by putting a lot of simple pieces like wood, tiles, bricks in the
correct order. When the microprocessor is designed, the instruction
decoder recognizes these inputs and starts an internal process that
allows the microprocessor to carry out the instruction. This pre-
supposes that the microprocessor is familiar with the instruction or, to
put it another way, the instruction is in a language that is understood
by that particular microprocessor.
Figure 9.2
They are
all saying
 ADD
122
Programming  using machine code and assembly
As we have seen, we cannot talk directly to a microprocessor and,
even worse, microprocessors often cannot talk directly to each other
(Figure 9.2). This is particularly the case when the microprocessors
have been developed by rival organizations.
Within one company, such as Intel, there is a commercial pressure to
ensure that each succeeding microprocessor understands the binary
codes of the previous designs. This is referred to as being  upward
compatible . There is nothing to prevent a company from designing a
microprocessor that has the same pins and programming capability as
another. The Z80180 for instance was designed as an updated copy of
the Intel Z80 which, in turn, was a revised version of the 8080A. It was
a pin for pin compatible plug-in replacement. This may be irritating for
the original designers but is accepted provided the internal design has
not been copied. Indeed, it often does the original company no harm.
If several compatible microprocessors are being sold it will induce
many programmers to write programs using this code. This will
increase the sales of these microprocessors and, perhaps, no-one will
suffer.
The Intel Pentium was under similar attack during 1997/8 from other
microprocessors like the Athlon series made by A.M.D. These can run
Pentium programs and, for some purposes, are superior to the
Pentium.
Machine code
The binary code that is understood by the microprocessor is called
machine code and consists of streams of binary bits. They are fed from
the RAM or ROM memory chips in blocks of 8, 16, 32 or 64
depending on the microprocessor in use. To us the binary stream is
total gibberish.
Example
If we refer to the Z80180 block diagram in Figure 9.3 we can
investigate the instruction necessary to add two numbers together. One
of the numbers is already stored in the accumulator or register A. Let s
assume this is the number 25H.
In comes the instruction: 11000110 00010101. It is in two parts, the
first byte, 11000110, means add the following number to the number
stored in the accumulator. This first byte which contains the instruction
is called the operation code, usually abbreviated to  op code . The
second byte, 00010101, is the number 15H. This particular instruction
has two bytes. Some instructions have only the one byte and others
three or more bytes. The additional bytes contain the data to be used
by the op code and is called the operand.
123
Introduction to Microprocessors and Microcontrollers
Figure 9.3
The microprocesser
adds two numbers
And here s the action
1 The first byte goes into the instruction decoder where it is decoded
into a sequence of internal operations.
2 It then copies the number 15H from the data buffer into ALU, the
arithmetic and logic unit.
3 The number 25H from the accumulator is then copied into the ALU
to join the 15H which is already there. The two numbers are
added.
4 And the result is copied back to the accumulator.
What is the result?
It is 3AH. Be careful not to let your brain jump back to decimal mode
and shout 40 at you.
At the end of a machine-code program, we must include an instruction
to stop the program, otherwise we can get some unexpected or
unwanted results. You may remember that, at least in the development
stages, the program is often stored in RAM.
Now, RAM locations take up random values when they are switched
off so when the program has completed the last instruction, it will start
executing the random values as if they were a program. These
instructions may, of course, do anything at all. They could even delete
or change the program that we have just written. Overall, the effect is
like an aircraft overshooting the end of a runway.
The problems with machine code
There are so many. The program is not friendly: 11000110
00010101 hardly compares with  Add 15H to the number 25H for
124
Programming  using machine code and assembly
easy understanding. There is nothing about 11000110 which
reminds us of its meaning  add the following number to the number
stored in the accumulator so a program would need to be
laboriously decoded byte by byte.
Typing in streams of ones and zeros is so boring that we will make
many mistakes, particularly when we remember that a real program
may be ten thousand times longer than this. Can you imagine typing
in half a million bits, finding the program does not run correctly and
then settling down to look for the mistakes?
Another problem is that the programmer must be aware of the
internal structure of the microprocessor. How else could you know
which register to use, or even which registers exist? So you master
all this and then change to another microprocessor and then
what? The whole learning process has to start again  new
instructions, new registers, and new coding requirements. It s all too
horrible.
The difficulties with machine code hardly mattered in the early days
of the microprocessor. Everyone who programmed them were
fanatics and loved the complexity and there were few serious jobs
for the microprocessor to do. This first program language was called
a  low-level language to differentiate it from our own verbal
communication language which was called a high-level language.
Machine code was later referred to as the  First generation language
(see Figure 9.4).
Very soon, the microprocessor was used for an increasing range of
tasks and revolutionary ideas like  speed and ease crept into the
Figure 9.4
High- and low-level
languages
125
Introduction to Microprocessors and Microcontrollers
discussions. This resulted in a new language called Assembly which
overcame the most immediate failings of machine code.
Assembly language, the second generation language
Assembly language was designed to do the same work as machine
code but be much easier to use. It replaced all the ones and zeros with
letters that were easier to remember but it is still a low-level
language.
The assembly equivalent of our machine code example 11000110
00010101 is the code ADD A,m. This means  add any nuMber ,m to
the value stored in the accumulator. We can see immediately that it
would be far easier to guess the meaning of ADD A,m than 11000110
00010101 and so it makes programming much easier. If we had to
choose letters to represent the  add command, ADD A,m was
obviously a good choice. A big improvement over alternatives like
XYZ k,g or ABC r,h. The code ADD A,m is called a mnemonic.
A mnemonic (pronounced as nemonic) is just an aid to memory and is
used for all assembly codes. Here are a couple of examples:
SLA E for shift to the left, the contents of register E.
LD B 25H load the B register with the number 25H.
Now see how easy it makes it by guessing the meaning of these:
INC H
LD C 48H
Finally, have a go at one that we have not considered yet.
LD B B
If SLA E means shift the contents of register E one place to the left, then
SRA E means shift the bits one place to the right. LD C 48H means put
the number 48H into the C register. LD B B enables us to copy the
number stored in the B register into the B register.
Note: the actual mnemonics differ between microprocessors. The
manufacturers issue an  instruction set that lists all the codes for each
of their microprocessors. Together with the number of clock cycles
taken by each instruction and a summary of the function of each.
Non-destructive readout
Incidentally, microprocessors in common with memories, always use
non-destructive readouts. This means that information is shifted from
one place to another by copying it and leaving the original number
unaltered. For example, after the instruction LD A C, the registers A
126
Programming  using machine code and assembly
and C will both finish up with the same information in them. This
enables stored information to be used over and over again.
To allow us to type in ADD A,15 rather than 11000110 00010101, we
need another program to do the conversion. This program is called an
assembler (see Figure 9.5).
Figure 9.5
An assembler
The program allows us to type in the assembly code, called the
source code, and converts it to machine code referred to as object
code. It can show the object code on a monitor screen or print it
out or it can load it into the RAM ready for use. When starting the
assembler, we have to state the RAM starting address that we wish
to use. This is normally only a matter of making sure it is in RAM
and avoiding the other programs already installed. The object code
is shown in hex numbers rather than binary to make it easier for us.
An assembler can only work within the instruction set provided by
the microprocessor designer. It cannot add any new instructions and
is (almost) just a simple converter or translator between mnemonics
and machine code.
Assemblers are available from many sources and all provide the
necessary conversion from source code to object code. In addition,
they may provide other features that will help us in the
programming.
Syntax help
Syntax is the structure of statements in a language, whether it be
English or a computer language. In English, most people would
recognize something is incorrect about saying  He are going rather
than  He is going . This is an example of a syntax error.
As an example, If we mistyped the instruction LD A C as LD A V then
the assembler would be unable to convert this to object code since it
will not recognize the  V as a valid register. A real cheapie assembler
may just stop or miss out this instruction. A somewhat better one may
put a message on the screen saying  syntax error code not recognized
and a very helpful one may suggest a likely cause of the trouble. It may
say,  syntax error. Invalid register. Register name may only be A, B, C,
D , E, H or L.
127
Introduction to Microprocessors and Microcontrollers
Labels
Another facility offered by a good assembler is the label. A label is a
word that can be used to represent an address while the program is
being written.
You will recall that we have to instruct the microprocessor to stop at
the end of a program otherwise it will go off following random
instructions. One way of stopping the microprocessor is to give it
something quite meaningless to do. Suppose you opened an envelope,
and the message inside read  put the envelope on the desk, pick it up,
open the envelope and obey the instructions . So you open the
envelope, read the instructions, put it on the desk, pick it up and read
the instructions. So you open the envelope, read the instructions . . .
and I m sure you can guess the next bit. We, of course, would soon
stop doing this because we would see that it is pointless. A
microprocessor on the other hand has no memory of ever having seen
the instruction before and will be quite happy to do it forever if
required.
Every byte of a program is stored in a sequence of memory locations
so if we started a program in address 0300H we may have got to the
address 0950H when the stop instruction is required. The last line of
the program was  jump to address 0950H . The jump instruction tells
the microprocessor to go to the address that follows, in this case
0950H, and perform the instruction to be found there. The micro-
processor now finds itself in the endless loop shown in Figure 9.6.
Once the microprocessor is in one of these loops it will run
continuously until the power supply is switched off, or the reset pin is
taken low, or one of the interrupt pins is activated.
Figure 9.6
One way of
stopping a
microprocessor
So where does the label come in?
Let s imagine that we find that we have to add an extra byte at the start
of the program. This will result in each byte being shifted one place
down in the memory and the last line of the program actually starting
at address 0951H rather than 0950H. When the program tells the
microprocessor to jump to address 0950H it will no longer be in the
128
Programming  using machine code and assembly
Figure 9.7
A late change to the
program can ruin
everything
little loop. The new contents of address 0950H may provide any
random instruction and the whole program could crash. This problem,
shown in Figure 9.7, will not be seen as a mistake by the assembler.
Remember that the assembler is only checking for known codes, not
sensible programs.
If we type a word over the position where the memory address
normally resides it will be recognized by the assembler as a label. That
is a word which is equivalent to the address it replaced. If we use the
same label anywhere else in the program it will be given the same
value. The good thing about this is that if the program is changed and
the addresses change, then the value of the label is changed
automatically so the two  STOP s in the last line will always have the
same value and the loop will be safe from accidental destruction
(Figure 9.8).
Figure 9.8
Labels to the rescue!
Once the assembler accepts the label, it can be used as often as we
like in the program but remember that a label can only ever have one
meaning within a single program. The choice of label is usually
restricted to avoid clashing with words that have a special meaning to
the assembler. Words that can do this are called  reserved words and
usually include words such as jump, LD, ADD, HALT etc. The actual
list is provided with the assembler program.
129
Introduction to Microprocessors and Microcontrollers
Remarks
Assemblers and all higher languages allow us to write remarks or notes
to act as reminders but to be ignored by the assembler. To tell the
assembler program not to attempt converting it to object code we
precede the note by a semicolon or the word REM: or something
similar.
The last line of our program, using the mnemonic JP for jump could be
written as:
STOP JP STOP ;this will hold the microprocessor in a loop.
Being able to add remarks to a program makes it much easier for the
program to be understood at a later date. At the time of coding, the
program seems, to the programmer at least, a model of clarity. When
the programmer is off sick and we have to take over, their strategy is
not obvious at all. It is even more embarrassing if the program that we
cannot understand is the one that we wrote ourselves a few weeks
earlier. The moral of this story is to add notes even if it seems
ridiculously obvious at the time.
Summary of assembly language
Assembly and machine code are not portable. This means that they are
designed to be used on a particular microprocessor and are generally
not able to be used on another type. They also require the programmer
to have knowledge of the internal layout or architecture of the
microprocessor.
Despite the two problems of portability and architecture knowledge,
assembly language has survived the onslaught of the new, modern
 improved languages considered in the next chapter.
Why?
Assembly languages have two overriding advantages in the hands of a
competent programmer (note the  competent ). A program written in
Assembly is faster and is more compact, i.e. it takes less memory space
to store it. Machine code and assembly languages are called
procedural languages. This means that the program instructs the
microprocessor to complete the first instruction, then start the next,
then the next and so on until it has finished the job. This is just like a
recipe.
Nearly all microprocessor-based systems are designed to operate in
this way and it seems so obvious that it is difficult to think that there is
any alternative  but there is, as we will see later.
130
Programming  using machine code and assembly
Quiz time 9
In each case, choose the best option.
1 An assembler:
(a) converts assembly programs into machine code.
(b) is a type of microprocessor.
(c) converts object code into machine code.
(d) is essential for converting mnemonics into source code.
2 The data that follows the op code:
(a) is always present and consists of one or more bytes.
(b) is called the object code.
(c) is called the operand.
(d) uses denary numbers.
3 A label is:
(a) an important feature in designer clothing.
(b) a form of syntax error.
(c) used to represent an address while the program is being
written.
(d) the part of the program that comes before an operand.
4 Machine code is:
(a) not a low-level language.
(b) written using mnemonics.
(c) any language designed for controlling machinery in industry.
(d) an object code.
5 The part of the microprocessor that can follow the
machine code is called the:
(a) Assembler.
(b) Instruction decoder.
(c) Instruction register.
(d) Mechanic.
131
10
High-level languages
Third-generation languages
The third-generation languages were intended to make life easier. They
were designed to improve the readability by using English words
which would make it easier to understand and to sort out any faults
(bugs) in the program. The process of removing bugs is called
debugging. In addition, they should relieve the programmer of any
need to understand the internal architecture of the microprocessor and
so the program should be totally portable. Ideally the programmer
should not even need to know what processor is being used. These
languages are called  high-level and are all procedural.
Over the years, many languages have been invented just as there have
been many microprocessors. Just like the microprocessors, a few
languages had some special aptitude that made them stand out from
the crowd. We will introduce some of the survivors.
Fortran
In the early days of computers, they were seen as a means of
improving the speed and accuracy of performing mathematical
calculations  rather as new and improved calculating machines. IBM
dominated the computer world at that time and employed John Backus
to produce an improved language to supersede assembly language.
132
High-level languages
The result, finalized in 1957, was Fortran. This was the first high-level
language to gain widespread acceptance. Its claim to fame was that it
could evaluate mathematical formulas. This gave rise to its name
 FORmula TRANslation (originally  IBM Mathematical Formula Trans-
lating System ). (See Figure 10.1.)
Figure 10.1
The first successful high-level
language  and still going
Fortran has instructions built-in to handle most scientific formulas such
as finding the sine of an angle which would be extremely difficult to do
in assembly language. Difficult, but not impossible. After all, the
Fortran program must first be converted into the machine code
understood by the microprocessor. If the Fortran program can be
converted to machine code, then it follows that the program could
have been written in machine code in the first case. Its just a matter of
saving an enormous amount of work.
As time went by, small additions and alterations were made to the
language giving rise to new  dialects . The disadvantage of this is that
it starts to erode portability  one of the primary reasons for having a
high-level language. In 1958 a re-defined language called Fortran 2
was born which was replaced in turn by Fortran 3 and 4. Still new
dialects were sprouting and, in 1966, a final, last, definitive version
called Fortran 66 was designed. Then we had the even more final and
more definitive Fortran 77 and the absolutely final and totally
definitive Fortran 90. This is not as bad as it seems since each new
version included extras rather than changes. There was a Fortran 95
version and there is another due out somewhere around the year 2004
to 2006 which, at the moment, is just referred to as 200X but at least
this name suggests a launch no later than the year 2009. In the
meantime, an easily learnt version, simply called F, was launched. This
was compatible with Fortran 77, 90 and 95 but includes some more
modern characteristics while older more redundant sections were
133
Introduction to Microprocessors and Microcontrollers
quietly dropped. High Performance Fortran (HPF) is similar to the 90
and 95 versions except that it has been extended to allow micro-
processors to be run in parallel for extra speed.
Compilers
In assembly language, we used an assembler program to convert the
mnemonics to machine code. We usually refer to the conversions
being from source code to object code but it means the same thing. In
Fortran, or any high-level language, we use a compiler to produce the
machine code. The compiler will also carry out the useful extras like
error and syntax checking that we met with the assemblers. Compilers
and assemblers are both software  that is, they are programs designed
to do a specific job. If we were using a 68000 microprocessor, and
wished to program it using a particular language, say Fortran, then we
would have to purchase a  Fortran 90 to 68000 compiler. It would do
just this job and nothing else. We could not adapt it in any way to
accept a different high-level language or  target it at a different
processor (see Figure 10.2).
Figure 10.2
Compilers
are like
assemblers
All assemblers are basically one-to-one converters. We enter the op
code and out comes the object code so the only difference between
two assemblers is in the amount of debugging and label handling help
that it can provide. Compilers are different. There are not any direct
object code equivalents to things like sine or square root so the final
output depends on the skills of the compiler designer. The programmer
must look at each of the available commands in the high level
language and write an assembly program to perform the function.
Some compilers are, therefore, inevitably better than others.
Libraries, linkers and loaders
When the designer has struggled through the process of devising
assembly code for a particularly nasty formula it would make sense
to store the answer away to allow its use on another occasion.
A collection of these solutions is called a library and can be purchased.
134
High-level languages
Figure 10.3
From high level to
low level
This reduces the amount of totally original coding that is needed.
Many  new formulas can be made from combinations of existing
code. Slotting these ready-made library routines into the main
programs is performed by a linker which is another piece of software.
The linker therefore joins or links together many separate pieces of
code into one program ready for use. The last job to be done is to load
it into some RAM ready for use. Another piece of software is used to
determine which addresses in the microprocessor system memory are
available. This is called a loader. A loader also converts labels to their
final addresses. Very often the linking and loading functions are
combined into a single linker-loader program. The process is
illustrated in Figure 10.3.
Fortran source code
Fortran consists of numbered statements called program lines and are
used to tell the system the order in which the instructions are to be
carried out. In the absence of any other commands, the program lines
are executed in numerical order.
Fortran code is written in a very compact form much closer to
mathematics than English. For example, to load a number and find the
square root of it may look like this:
1 Read (4) P
2 A = SQRT(P)
135
Introduction to Microprocessors and Microcontrollers
In statement 1, the microprocessor is sent to input number 4 (this must
be defined earlier) and retrieves a number which we call P. Statement
2 finds its square root.
Fortran has accumulated enormous libraries to handle scientific and
engineering problems. The drawback of Fortran is that its instructions
are so very compact that, unless you are happy with formulas, it can
look a little frightening. In addition, its format is very precise and this
makes it difficult and unforgiving to learn. If you have a morbid dread
of mathematics, you may find its approach a little daunting.
Basic
In Dartmouth College, USA, a simplified language was developed. It
was based on Fortran and was designed as a simpler language and
easier to learn. This language was called Basic (Beginners All purpose
Symbolic Instruction Code) and first appeared in 1960 (see Figure
10.4).
In the early days, the emphasis was on  easy to learn and  using a
minimum amount of memory as memory was very expensive. These
two attributes made it very useful in colleges but was largely ignored
 in the real world . As microprocessors appeared and gave rise to the
Figure 10.4
The Basics
136
High-level languages
microcomputer, the benefits of low memory requirements gave it a
renewed popularity and it  took off .
To save memory, Basic was designed as an interpreted language. An
interpreter rather than a compiler carried out the conversion of the
source code to the object code.
What s the difference? The compiler converts the whole program into
object code, stores it, then runs the program. The interpreter takes a
different approach. The first instruction in the program is converted to
source code and it is then executed. The next item of source code is
then converted to object code and then ran and so on right through the
program (see Figure 10.5). The interpreter never stores the whole of
the machine code program. It just generates it, a line at a time, as
needed.
Figure 10.5
The Slow  n easy interpreter
137
Introduction to Microprocessors and Microcontrollers
The development of Basic
The explosion of microcomputers in the 1980s resulted in widespread
adoption of Basic. It was used, or at least played with, by more people
than any programming language before or since. More variations, or
dialects, started to appear, as occurred with Fortran.
In the case of Fortran, the American National Standard Institute (ANSI)
collected all the ideas together and produced the standard Fortrans
like Fortran 66, 77 and 90. This did not happen with Basic and the
result is now an open market with several hundred different
competing, sort of compatible, Basics floating around. Most of the
earlier ones have withered away leaving a few popular versions like
Q-Basic, GW Basic and Quick Basic. More recently, with the virtual
monopoly of the Windows operating system, a new version called
Visual Basic (VB) has appeared which has features to make the
generation of Windows programs much easier.
Over the years, the language has developed to provide more and more
features until it closely rivals Fortran, even for calculations. Basic has
shaken off its beginner s label and is used by many professional
programmers. Now that memory size is not such a problem, compiled
versions are now used to accelerate the execution of programs.
There has been a series of versions of Visual Basic, VB1 to VB6 and we
now have VB.Net to allow easy manipulation of WindowsTM and Web
site material.
Basic is very readable
It uses line numbering as in Fortran and is generally readable. Here is
an example. Test out its claim to readability by guessing the
outcome.
10 input A, B
20 Let C = A * B
30 Print C
40 End
On line 10, it requests two numbers A and B to be entered, possibly via a
keyboard. Line 20 defines a new number C as the result of multiplying
them together. Print means providing an output either onto a printer or
to the screen of the monitor. The last line stops the program.
As you will remember, we always have to give a microprocessor
something safe to do after it has completed a program otherwise it will
start following random instructions. We can do this by sending it in a
loop as we did in the assembly example to follow the same instruction
over and over again or we can send it off to follow another program.
The END instruction does just this. The program is returned to a
138
High-level languages
 monitor program. A monitor program does the often forgotten parts of
the system like scanning the keyboard to accept further instructions
and is in no way connected with the screen showing the visual
images.
The line numbers are executed in numerical order and any missing
numbers are just ignored. This allows us to use line numbers that
increase in steps of five or ten instead of ones. The advantage of this is
that any forgotten instruction can be added later by giving it a new line
number. For example, if we remembered that we wanted to divide the
value of C by 2 then print this result as well, we could add a couple of
extra lines:
10 input A, B
20 Let C = A * B
30 Print C
32 Let D = C/2
35 Print D
40 End
A final point is that we do not say what A, B, C or D stand for before
we start. The program implies the necessary information. In other
words, we do not have to declare the variables.
Cobol
Fortran and Basic, the son of Fortran, did not make enormous steps
towards employing normal English language phrases. This was
attempted by the US Defense Department who introduced Cobol in
1959  just before Basic (see Figure 10.6). Its purpose was not number
crunching, like Fortran, but information handling. It proved to be
successful at this and spread from the US Navy where it kept records
of stocks and supplies, to the business world. The name was derived
from COmmon Business Oriented Language.
Cobol was designed, more in hope than reality, to be easily read by
non-programmers. However, it looked friendlier than the mathemat-
ical approach of Fortran and has survived to the present day. It is
generally used by large corporate computers rather than Desktop
PCs.
Large businesses handle enormous amounts of information data. Just
imagine the amount of information involved in a few everyday
activities. We apply to open a bank account  a form appears
asking an almost infinite number of questions. Then we want a
credit card  more forms, more information mostly the same as we
gave them for the bank account. Then we buy something. What we
bought, its stock number, its price, the date, our card number, and
139
Introduction to Microprocessors and Microcontrollers
Figure 10.6
This is the business
name are all transmitted to the national card centre and our account
is amended. None of these transactions involve particularly compli-
cated mathematics. The calculations are basically addition and
subtraction of totals. So the calculating ability of Cobol does not
need to rival Fortran or even Basic. But what it can do it to extract
related information  put in our post code and out comes all sorts of
information about us  credit rating, employment, home address,
hobbies, purchasing patterns and almost anything else they want.
Some of this information is bought and sold between companies
without reference to us.
Like Fortran, it has survived by meeting a specific need and has had a
series of upgraded standard versions. They refer to the date of
adoption: Cobol 60, Cobol 74, Cobol 85, Cobol 97 and the new 2002
version.
A real effort was made to allow the language to be understood by those
who know more about English than about programming. To this end,
Cobol statements are English phrases including a verb and ending with
a comma. The phrases can be joined up to form a sentence or a single
statement can end with a period (full stop).
A line may read:
1 Add staff to customers to give total people.
140
High-level languages
Pascal
Pascal was first designed in Switzerland in 1971 (Figure 10.7). It is
mostly an academic language and has been largely overtaken for
professional programming by languages such as C. When learning
other languages, a short course of Pascal is often employed as an
introduction. Pascal is used because it is  good for you , just as it is
often said that to learn European languages it is  good to learn Latin
first to lay down the rules of language before starting on French,
German or Spanish.
Figure 10.7
Pascal does you good
Pascal is a very structured language. A structured program consists
of a series of separate, self-contained units each having a single
starting point and a single exit point. The program layout looks like
a simple block diagram with all the blocks arranged one under the
other. Since every unit can be isolated from the ones above and
below, detecting an error, or understanding a new program, is
relatively easy.
Languages like Basic can use instructions like GO TO to jump to a new
part of the program and this often results in what is called  spaghetti
programming, making it very difficult to find a fault in the program or
141
Introduction to Microprocessors and Microcontrollers
Figure 10.8
Structure
and
spaghetti
even to understand what the program does (see Figure 10.8). Pascal
avoids this by using instructions like  Repeat ... until . Basic is cleaning
up its act by incorporating this type of instruction into the more recent
versions.
C
Apart from teaching good programming habits, Pascal was largely
replaced by the language called C, invented a year after Pascal and
allowing all the good practice programming methods of Pascal with a
few extras (see Figure 10.9).
The main difference is that it is a lower-level language than Pascal
which may seem a strange improvement. Its advantage is that it can
control low-level features like memory loading that we last met in
assembly without all the drawbacks of using assembly language. It
has many high-level features, and low-level facilities when we
require them and can produce very compact, and therefore fast,
code.
C++ and object-oriented programming
A new version of C has included all of the previous C language and
added a new feature called object-oriented programming. This
version, called C++, is referred to as a superset of C (see Figure
10.10).
Object-oriented programming is a somewhat different approach to
programming. In all previous cases, a task has been set and we look at
142
High-level languages
Figure 10.9
C
the problem in terms of what processing is required to reach the
required result. In object-oriented languages we have a number of
objects which can be anything from some data, a diagram on a
monitor screen, a block of text or a complete program. Once we have
defined our objects, we can then allocate them to their own storage
areas and define ways of acting on the entire object at the same
time.
As an example, if we drew a square on the monitor screen and wished
to move it, we could approach this in two ways. We could take each
point on the screen and shift its position and hence rebuild the square
in a different position. The object-oriented approach would be to
define the shape as an object, then instruct the object to move. This is
rather similar to our way of handling parts of the screen in a Windows
environment. We use a mouse to take hold of an object, say a menu,
and simply drag it to a new position. The menu is being treated as a
single lump, which is an example of an object.
All the menus have similarities and differences. Similar objects are
grouped into  classes . A class includes the definition and type of the
data together with the methods of manipulation that can be applied to
an object. In our example of a class including the menus, each specific
143
Introduction to Microprocessors and Microcontrollers
Figure 10.10
C plus objects and
Java
menu is called an  instance . All of a class share some properties called
 public properties and are different in some way, like different text
being entered, these are called  private properties.
As we saw earlier, C++ is just standard C with the object-oriented
extras added to it.
Java
Although not its original destiny, Java was found to be ideal for
transmitting information over the Internet. It looks, at first glance, to be
similar to C++ but it has some important advantages. It is small and
does not require any particular architecture and can therefore be
embedded in other applications for use in a wide range of systems.
This embedded Java code is called  Applets and is used in Internet
Explorer and other browsers.
Fourth-generation languages
Fourth-generation languages are non-procedural and tend to concen-
trate on what the program must do rather than the mechanics of
the step-by-step approach of the procedural languages. A tempting
144
High-level languages
definition is to say they are the most recent, or the most popular or the
 best languages. None of these definitions apply, so it may be better to
stick to non-procedural as the most likely definition.
Lisp
Lisp was designed about the same time as Cobol and several years
before Basic. It is the work of an American, John McCarthy (see Figure
10.11).
Lisp (LISt Processing) involves the manipulation of data which is held
in lists or entered by keyboard and is associated with artificial
intelligence. Lisp is a function-oriented language. This means that we
define a function, such as add, subtract or more complex combina-
tions. A list consists of a series of  members separated by spaces and
enclosed in brackets. Samples of lists are (2 5 56 234) or (mother father
son daughter).
A simple function defined as (PLUS 6 4) would return the answer 10 by
adding the two numbers. Since it is an interpreted language, the
program is executed one step at a time so inputted values are used as
they are entered. In some versions of Lisp, this would have been
written as (+ 6 4) using the mathematical symbol.
Figure 10.11
Lisp  dealing with lists
145
Introduction to Microprocessors and Microcontrollers
We can define our own function by saying
>(defun result (A B)(+A B))
defun = define function and A B are inputted numbers and the answers
have been given the name  result . So, if we input the numbers 4 and
5 we would receive the response 9. This has defined a function in
which we enter two numbers A and B and they are added. We could
use this to enter a list of values for A and B generating a list of all the
results.
APL
The letters APL stand, reasonably enough, for  A Programming
Language . This is another interpreted language developed by IBM
around 1962 and is only used for numerical data. It is a curious
mixture of Lisp and Fortran. It combines the function orientation of
Lisp with the terse procedural mathematics of Fortran (see Figure
10.12). It allows user-defined functions and has a large library of
solutions to common problems. Most people would agree that given
a choice, APL is not the language to learn if you are in a hurry. For
example, the four basic functions of add, subtract, multiply and
Figure 10.12
A programming language
146
High-level languages
divide are present but even here, life is not easy. What would you
expect the result of 2 3 to be? Well, it s not 6. This would be
*
written as 3 2 and 2 * 3 is actually 23 or 8. The statement: Value

�! 4  2 four take away minus two giving an answer of plus six.
Notice the different symbols for minus and a negative number.
Other mathematical functions like sin, cos and tan are replaced by
special symbols that do not appear on standard keyboards.
Easy, it is not. The good news is that, once mastered, it provides fast
compact programs but the many cryptic statements would need to
include many comments to help another person to understand your
program.
Prolog
Prolog is called a  declarative language in which the program
designer does not need to know exactly what the output will be when
starting the design of the program. It was first developed in France in
1972 with a view to its use in the development of artificial intelligence.
Prolog stands for PROgramming by LOGic. Other versions were
developed, such as DEC10, IC Prolog, which were produced in the UK
and other versions from the US (see Figure 10.13).
Figure 10.13
A logic-based
language
147
Introduction to Microprocessors and Microcontrollers
Prolog is another non-procedural language in that it is not a route to a
goal but a set of information and a method from which the result can
be deduced. Basically the idea is to feed in some facts and ask the
program to produce some conclusions. You will remember the little
logic puzzles like  Graham is married to Anne, Kirk is the son of Peter
and the brother of Matt . . . Is Kirk the brother of . . . You know the sort
of thing  more and more interconnected pieces of information until
your head hurts. Just the job for Prolog.
The program includes facts and rules then we can ask questions. Here
is a really simple example.
Facts:
coins (franc, france)
coins (centime, france)
coins (dollar, usa)
coins (cent, usa)
Rules:
french(x): coins (x,france)
american(x): coins (x,american)
Now we ask some questions:
?french (centime)
answer: Yes
?french (dollar)
answer: No
OK so far, but:
?american (dime)
answer: No
It has no data so it cannot say that dime is correct so it plays safe and
says it is incorrect.
The future
Increasing microprocessor speeds and using several to share the
processing tasks together with the decreasing size and cost of memory
will be the key to the future. The idea of a desktop computer running
at 20 GHz and having 128 Gbytes of memory is no longer ridiculous.
In fact, it is looking rather modest after looking at Table 10.1 in which
the trend over the last 26 years is projected another 26 years into the
future.
 It cannot keep increasing  quote of the year 1972, 1973, 1974,
1975, 1976 . . .
148
High-level languages
Table 10.1
Similarly priced Intel 4004 Intel Pentium Microprocessor
microprocessor in 1972 in 1998 in 2024
systems
Clock speed 0.108 MHz 300 MHz 833 GHz
Memory 640 bytes 64 Mbytes 6.4 Tbytes
Performance (MIPS) 0.06 approx. 600 approx. 6 000 000
A persistent occupant of my crystal ball is real spoken voice
communication. A few years ago voice recognition was only a dream
and is now a reality and becoming increasingly efficient. Voice
synthesis is progressing nicely and is beginning to sound less robotic.
When these two technologies mature, simultaneous language transla-
tion will not be far away and real dialog with the computer will begin.
Another million television programs suddenly become available
without sub-titles (you see, all progress comes at a price!).
Six million, million instructions per second and 800 GHz clock speed
together with total voice control of computer functions will be here in
a few years.
 How about that Mr Spock?
 Fascinating
That s my guess.
At least it is something to look back and smile about in the future.
Quiz time 10
In each case, choose the best option.
1 A compiler:
(a) converts machine code to a high level language.
(b) is faster than an interpreter.
(c) is another name for a linker.
(d) is not available for the Basic language.
2 APL was largely influenced by:
(a) Cobol and Prolog.
(b) Lisp and Fortran.
(c) Fortran and Basic.
(d) Pascal and Cobol.
149
Introduction to Microprocessors and Microcontrollers
3 A fourth generation language can be described as a
language which:
(a) is still being used.
(b) is object-oriented.
(c) was developed for artificial intelligence.
(d) is non-procedural.
4 A language designed to allow logical deductions to
be made from input data is:
(a) C.
(b) Latin.
(c) Prolog.
(d) Fortran.
5 Pascal:
(a) is a low level language compared with C.
(b) is only of use if you are going to translate it to European
languages.
(c) is a highly structured language.
(d) was the first popular high-level language.
150
11
The development of
microprocessors and
microcontrollers
Micros are getting bigger  and faster
As the complexity of microprocessors and other digital integrated
circuits has increased, there has been an inevitable increase in the
number of transistors that are incorporated in their design.
In the list below, we have used transistors or their equivalent. These
classifications are not universally accepted, there are different names
and numbers floating around, so a degree of flexibility should be
employed when comparing different sources. This is particularly true
at the large end where the terminology has not yet  firmed up .
SSI Small scale integration 1 10 transistors
MSI Medium scale integration 10 1000 transistors
LSI Large scale integration 1000 10 000 transistors
VLSI Very large scale integration 10 000 100 000 transistors
SLSI Super large scale integration 100 000 1 million transistors
ULSI Ultra large scale integration 1 10 million transistors
The increase in the number of devices has also had the effect of
necessarily decreasing the size of each component. If the same
component size were used for the current front runners as was used for
151
Introduction to Microprocessors and Microcontrollers
the original 4004 microprocessor, they would be about the same size
as a page of this book. For reasons that we will look at in a moment,
unless we reduced the size of the components, we couldn t increase
the speed of operation and so the current microprocessors would have
a maximum clock speed of under 1 MHz.
How do we measure the speed of a microprocessor?
This is a lot more difficult than we think because the developers of
microprocessors are in competition with each other so as soon as a
method is suggested, they try to exploit the situation to present their
microprocessor as faster than all the others.
Be wary when reading comparisons  which tests have they chosen,
and why? While watching the last Olympic games, it occurred to me
that I was probably faster that any of those competing in the 100
metres. Yes, I felt confident that I could build a working micro-
processor-based system quicker than any of the athletes. You see,
comparisons all depend on the test that we have decided to use.
Anyone can be World champion. It s only a matter of choosing the
tests well enough. With that in mind, here are a few popular speed
comparisons.
MIPS (millions of instructions per second)
This appears an easy measurement to take. It is simply a matter of
multiplying the number of clock cycles in a second by the clock cycles
taken to complete an instruction.
The current Athlon for example can run at 2 GHz or 2000 MHz. It can
perform up to 9 instructions per clock cycle so its number of
instructions per second is simply 2 � 109 � 9 = 18 000 million cycles
per second.
Life is never that simple. Some instructions are more time consuming
than others as they take a different number of clock cycles to perform
the task. Competitors will obviously choose instructions that give the
most impressive results on their own microprocessor.
An extreme example occurred about ten years ago with the Intel
80836, we could ask it to perform some additions. By consulting the
instruction set, we could see that they each take two clock cycles to
complete. Now, if we take a clock frequency of 25 MHz, each clock
cycle would last for 40 ns so an  add instruction would take 80 ns.
This would equate to a speed of 12.5 MIPS. An unkind competitor may
take  at random the divide instruction that takes 46 clock cycles, they
could reduce its MIPS rating to a measly 0.54 MIPS. A really vindictive
person could search through the instruction set with a magnifying glass
and find that there is a really obscure instruction that takes 316 clock
152
The development of microprocessors and microcontrollers
cycles. This would provide a speed of 0.08 MIPS  about the same as
a four-bit microprocessor.
We cannot even say that we can make it fair by using the same
instruction for each microprocessor since they don t always have their
talents in the same area. If we had two microprocessors, each with a
 load instruction taking five clock cycles and they both ran on a
10 MHz clock, what would be their speed? 10/5 = 2 MIPS. (In working
this out we can just ignore the fact that the clock cycle is in megahertz
since the speed is measured in millions of instructions.) But can they
do the job at the same speed? Possibly or possibly not. What if one was
a 64-bit microprocessor and the other was an 8-bit microprocessor.
The 64-bit one could shovel data at eight times the speed. For good
reason MIPS have been referred to as  Meaningless Indication of
Performance by Sales reps .
FLOPS (FLoating-point Operations Per Second)
To overcome the problem of which instructions should be employed
some standard floating-point operations can be used.
As a quick reminder, a floating point number is one in which we have
moved the decimal point to the start of the number, so 123.456 would
be converted to 1.23456 102. This makes the mathematics faster.
Modern microprocessors would have values in the order of ten
GFLOPS (GigaFLOPS).
This also meets with objections. The obvious question is,  What
 operation is being measured? Choose your operation carefully and
the opposition is left far behind.
Both of these tests, MIPS and FLOPS are supposed to be micro-
processor tests and not system tests.
System tests
Other speed measurements tend to be system tests rather than
microprocessor tests but a brief overview may be in order since they
are often quoted, almost as alternatives.
Benchmarks
These tests are based on making the microprocessor-based system
run a standard or  benchmark program. The immediate failing here
is that to get a program to run on microprocessors with incompatible
code will mean that the compilers will also be tested, which is not
part of the system. There is also an immediate outcry from people
who disagree with the program chosen since it doesn t suit their
system.
153
Introduction to Microprocessors and Microcontrollers
I/O operations (input/output operations)
As the name suggests, this measures the speed of accepting informa-
tion in and sending it out again. But loading information from a CD for
example will depend on whether the information is being read from
the same track or does the head have to move and include seek-
time?
TPS (Transactions Per Second)
This is a move to model the tasks set into real-life situations. It requires
the system to take in information, modify it and then store it again. It
puts a heavy significance on memory access times and compilers.
SPECmark (Systems Performance Evaluation Co-operative s benchmark)
This is the average result of carrying out 10 agreed benchmark tests in
an attempt to measure the system performance in a range of situations.
Recent changes include one using floating point arithmetic, which is
of more interest to serious number crunching in science and
engineering and the other an integer test for the rest of us. These are
referred to as SPECfp95 and SPECint95. As a starting point for
comparison, the 200 MHz Intel Pentium Pro delivers a value of 8.71
using the SPECint95.
How to make a microprocessor go faster?
Increase the clock speed
This seems the obvious answer and generating the necessary square
wave shown in Figure 6.4 is no problem. In a modern microprocessor-
based system there are two clocks that we need to consider. There is a
square-wave clock that controls the internal operation of the micro-
processor. This is the headline speed seen in the adverts,  the 2 GHz
Pentium . There is also the operating clock, about 133 MHz, for the
system to control the external devices and memory. This saves us from
upgrading all the external devices to match each new processor.
Internal clock speeds will probably continue to increase at least into
the low gigahertz range but there are limiting factors that will make
continuous increases in speed difficult to achieve. It would be a trivial
electronic problem to generate a square wave of 1000 GHz or more,
so there is obviously more to it. And there is.
Power dissipation
Heat is a form of power and is an unwanted by-product of any activity
inside a microprocessor.
Power = voltage current
154
The development of microprocessors and microcontrollers
So, to reduce heat production, we have to reduce either the voltage or
the current, or both.
We will start with voltage since it is a little more straightforward. The
early microprocessors used a 15 V supply that has been steadily
reduced and the latest designs are pushing at 1.5 V. How much further
can we go along this line? It appears as if we have nearly reached the
limit. The integrated circuits are made from a semiconductor called
silicon. This passes electricity under the control of electric charges.
The applied voltage creates this charge. In silicon, the simplest device
needs at least 0.6 V to operate although, by adding minute traces of
other materials, this figure can be reduced a little. A single transistor
can do little with voltages less than 1 V so in a complex circuit it is
already amazing that the total voltages can be as low as they are. The
chances of a microprocessor running on less than 1 V is slight indeed.
If I were braver, I would say impossible. Another point with regard to
the voltage is that we must not forget the effects of random electrical
noise as we saw earlier in Figure 2.2. Sudden changes in current flow
in nearby circuits can cause random changes. If the voltages are
reduced too far, the microprocessor will become more prone to
random errors.
Bursts of current are promoted by the vertical leading and trailing
edges of the clock pulses so the higher the clock frequency, the more
edges per second and the more current will flow and hence more heat
will be generated. To reduce the heat generated simply reduce the
clock speed, which is exactly what we don t want to do.
Size of architecture and its effects
As the electric charges move through the transistors inside the
microprocessor it takes a finite time. It follows then, that if we reduce the
size of the transistors we can move data around faster and this is true.
The smallest feature that could be fabricated in a microprocessor had
an initial size of about 10 m when microprocessors were first
produced; it has now been reduced to 0.13 m, a significant
reduction. This reduction has two drawbacks. Firstly, it is much more
difficult and expensive to manufacture without accepting enormous
failure rates. Secondly, the heat generated has not changed, since it is
a feature of voltage and current but not size. This means that its
temperature will increase unless we can dissipate the power. An
unfortunate problem with semiconductors is that they are heat
sensitive and will auto-destruct if the temperature rises too far. We do
our best with heat sinks, which are basically slabs of aluminum with
fins to increase the surface area, and fans to keep the heat moving. A
typical operating range is 0 85�C when measured in the centre of the
outer case of the microprocessor (not the heat sink).
155
Introduction to Microprocessors and Microcontrollers
To increase the system speed
When we look at the overall system, it is apparent that not all things
have progressed at the same rate. The largest bottleneck is the memory.
We already use a slower clock speed but the microprocessor still spends
a lot of its time humming a tune and bending paper clips waiting for
information to arrive from the memory. During the life of the
microprocessor, the clock speed has increased from 0.1 MHz to about
3 GHz, an increase of about 30 000 times. During this time, these
DRAM memories have got bigger but only about 2000 times faster.
Modern microprocessors have about 128 kbyte of on-board RAM,
called a cache. When the microprocessor has to go to the external
memory for information, it saves a copy of the address and the
information in case it is needed again. It also saves the address and
information from the next memory location. The reasoning behind this
is that since nearly all languages are procedural then the next location
is likely to be accessed next. If not, the program may jump back to a
previous address to repeat part of a program as in a counting loop to
produce a delay. When the microprocessor next requires access to the
memory, it first checks the high speed cache to see if the information
is stored, if it is, we have scored a  hit and the system has increased
its speed. If it is not there, it is a  miss and the main memory is used.
This new information is then stored in the cache for later.
This cache is sometimes called a level 1 cache, or L1 cache. This
implies that there may be a level 2 cache  and there is. The L2 cache
is usually 256 kbyte.
When data is needed, the microprocessor checks cache level 1, then
2 and lastly, the main memory.
Making more use of each clock pulse
Pipelining
To put too much reliance on the clock frequency is like saying that the
maximum rpm of the engine determines the maximum speed of a
vehicle. Yes, true, but other things like gearbox ratios are also
significant. Doing 9000 rpm in first gear will not break any speed
records. The real speed of a microprocessor also depends on how much
useful work is done during each clock cycle. This is where pipelining is
really helpful and is now incorporated in all microprocessors.
Let s assume we have some numbers to move from the memory to the
arithmetic and logic unit (ALU):
Clock pulse 1 A number is moved from a memory location to the
accumulator.
Clock pulse 2 It is then moved from the accumulator to the ALU.
156
The development of microprocessors and microcontrollers
If we have another number to be loaded, this would have to repeat the
process so loading two numbers would take four clock pulses. Three
numbers would take six clock pulses and so on.
During the first clock pulse, a number is being moved along the bus
between the memory and the accumulator and so the other part of the
bus between the accumulator and the ALU is not used. During the
second pulse, we still have one section of the bus idle (Figure 11.1).
Figure 11.1
One clock
pulse moves
one number
Pipelining is the process of making better use of the buses. While one
number is shifted from the memory to the accumulator, we can use the
same clock pulse to shift another number from the accumulator into
the ALU along the other section of the bus. In this way, we get more
action for each clock pulse and so the microprocessor completes
instructions faster without an increase in the clock speed (Figure
11.2).
Figure 11.2
One clock
pulse moves
two numbers
If we get two jobs being done on the same clock cycle, then this has
made a significant improvement to the speed without increasing the
clock speed. If we can manage to get three pieces of information
moving, or jobs done, this is even better. Incidentally the Pentium
manages five and the Pentium Pro can manage 12 and the Pentium 4
can keep up to 126 instructions  in flight . Unfortunately, we can never
get pipelining to work this well on all instructions, but every little
helps.
RISC and CISC
If we wished to AND two binary numbers, we could do it by using a
logic gate as we saw in Chapter 5 or we could use a microprocessor
executing an instruction code. Now, comparing middle-of-the-range
157
Introduction to Microprocessors and Microcontrollers
devices, the logic gate would complete the task in 8 ns but a
comparable microprocessor (80386, 25 MHz) would take a minimum
of 80 ns.
This type of comparison established the belief that, given a choice,
hardware is always faster than software. In the above case, it is 10
times faster.
Given the job of carrying out a hundred such instructions we had a
choice:
Software method = 100 operations 80 ns = 8000 ns (8 ms)
Hardware method = 1 operation at, say, 240 ns + 100 hardware
operations 8 ns = 1049 ns
This philosophy was followed throughout the development of 4- and
8-bit microprocessors. This gave rise to more complex hardware and
a steady increase in the size of the instruction set from a little under
50 instructions for the 4004 up to nearly 250 in the case of the
Pentium Pro.
In the mid 1980s, the hardware-for-speed approach began to be
questioned. The ever-increasing number and complexity of the
operating codes was reversed in some designs. These microprocessors
were called RISC (Reduced Instruction Set Computers) and the  old
fashioned designs were dubbed CISC or (Complex Instruction Set
Computers). History has not proved so black and white as this
suggests. It is much more a matter of shades of grey with new designs
being neither wholly CISC nor RISC. The use of predominately CISC
microprocessors outnumbers RISC designs by a wide margin, at least
60:1. This does not imply that they are better but they simply have a
greater proportion of the market. As we know, there is a lot more to
market dominance than having the best product. Sadly.
CISC designs include all the 8-bit microprocessors and Pentium,
Pentium Pro and all of the 68000 family whereas the RISC includes
Digital Alphas and the IBM/Motorola Power PCs.
RISC versus CISC
Both RISC and CISC microprocessors employ all the go-faster
techniques such as pipelining, superscalar structures and caches. A
superscalar architecture is when there are two ALUs that share the
processing like having two microprocessors. So, what are the real
differences?
By analysing the code actually produced by compilers, we find that a
small number of different instructions account for a very large
proportion of the object code produced. Most popular are the
instructions that deal with data being moved around.
158
The development of microprocessors and microcontrollers
At this point a curious switch of design occurred. You will remember
that the  normal or CISC microprocessor included a microprogram in
its instruction decoder or control unit. This microprogram was
responsible for the internal steps necessary to carry out the instructions
in the instruction code. So the microprocessor that we have been
praising for its use of hardware to gain speed, is actually being run
internally by software.
The RISC approach was to reduce the number of instructions
available but keep them simple and do them fast. The number of
instructions were reduced to under a hundred. Since instruction
codes can be easily enhanced by adding some extras to the
microprogram it was tempting to do it. No pruning of previous
instruction was possible owing to the need to maintain compatibility
with previous versions.
Following the cries of  hardware is faster than software it seemed a
logical step to do away with the microprogram and replace it with
hardware that could carry out the simple steps necessary. This
hardware was made more simple by keeping all the instructions the
same length so that pipelining was easier to organize. The only
disadvantage of these constant length instructions is that they all have
to be the same length as the longest and so the total program length
will be increased.
CISC kept shoveling bucketfuls of data backwards and forwards
between the microprocessor and the external memory using many
different types of instruction. RISC designs just had a simple load and
store instruction and everything else is done internally using a large
number of registers to replace the external memory.
By the use of hardware for handling instructions and internal moves
between registers, all instructions could be reduced to a single clock
cycle, which gave a significant increase in speed. Generally, the
Pentium Pro has managed to match this speed by its extensive use of
pipelining.
As time goes by, there is an increasing tendency for the RISC/CISC
difference to decrease. Modern RISC microprocessors like the Pow-
erPC970 have an increasing number of instructions even though they
do tend to be simple and fast and the more traditional CISC approach in
the Pentium 4 is also employing simple yet extremely fast instructions.
Who did what, when
As we know, our starting point was the Intel 4004 in 1972, very
quickly followed by the 8-bit 8008 processor. These are shown in
Figure 11.3. Notice that, even within a company, there was no
agreement about the operating voltages.
159
Introduction to Microprocessors and Microcontrollers
Figure 11.3
The first 4- and 8-bit
microprocessors
It also started the trend for numbering, rather than naming, a
microprocessor. This made good sense since each basic design
generated a series of variations, different speeds, modified instruction
sets etc. The numbers can give a clue as to some of the basic
characteristics and the hierarchy. Sometimes an X is used to signify a
family of devices like the 80X86, so by giving different values to the X,
we include the 80286, 80386 etc. The tendency now is to use a name
and a number. This was due more to a legal problem owing to the
difficulties of  owning a number. This was highlighted after Intel
produced the 80286 followed by the 80386 and 80486, which gave its
competitors rather advanced warning of the name of the next one.
Intel couldn t copyright the number 80586 otherwise mathematicians
would fear prosecution if any calculation resulted in this number. They
tried to call it the P5, claiming world rights over the letter P. Finally
they went for  Pentium . Apart from the fun of watching it all going on,
the main beneficiaries, as usual, were the corporate lawyers (for whom
we all pay, of course).
Intel versus Motorola
In December 1973, Intel introduced the 8080A. This was a very
popular processor that had a 16-bit address bus so it can address up to
64 kbytes of memory or, as the adverts said at the time,  a MASSIVE
64k of memory . The power supplies changed again, this time to +5 V,
+12 V and  5 V. The number of instructions increased again and the
number of pins increased to 40. Internally, there was the normal
accumulator and eight general-purpose registers. This, then, became
the standard package size for future 8-bit microprocessors as shown in
Figure 11.4.
At about the same time, Motorola introduced a rival in the form of the
MC6800. Like the Intel 8080A, this one was an 8-bit microprocessor
160
The development of microprocessors and microcontrollers
Figure 11.4
A standard size for 8-bit
microprocessors
with 16 address pins. At this point, the similarities ended. It was not
compatible with the 8080A and so fought toe to toe in the market
place, and came second!
The power supplies were simplified, now requiring only a single +5 V
supply. A block diagram of the MC6800 is shown in Figure 11.5. We
can see that it was unusual in not having any general purpose registers
but it did have two accumulators. The approach here was to use an
external memory location for the temporary storage of information that
all previous microprocessors would have put into an internal register.
The remainder of the microprocessor is quite familiar from our look at
the Z80 in Chapter 8. The 6800 performed slightly faster than the 8080
on average, but not enough to break the hold of Intel in the
marketplace.
The final 8-bit microprocessors
At this time, Intel was working on the design of a replacement for the
8080A. It was a response to the criticisms of the 8080A: Why does it
need three different power supplies when the 6800 only need one?
And why only one interrupt pin when the 6800 has two?
At this time some of the engineers that had been working on the 8080A
and were developing the replacement called the 8085A decided, or
were persuaded, to move to a rival company called Zilog.
Meanwhile, back at Intel, the 8085 was produced. It answered all the
gripes about the 8080A and increased the clock speed to 5.5 MHz.
Still 8 bits with a 16-bit address bus, it stayed with its eight internal
general purpose registers. It followed Motorola s lead and opted for a
single +5 V power supply but to keep its customer base it kept its
instruction code compatible with the 8080A.
161
Introduction to Microprocessors and Microcontrollers
Figure 11.5
MC6800 Motorola s answer
to the Intel 8080A
Back at Zilog, the other group of engineers that was also brought up
with the 8080A set to work on the Z80 which was later developed into
the Z80180. They combined much that was good about the Intel
designs with some good ideas from the MC6800. A single power
supply was used and this not only returned to the use of internal
general purpose registers but increased their number to 14. The
instruction code included all the code from the 8080A but added some
new ones to nearly double the total number.
Meanwhile a new player, MOS Technology entered the fray with its
own MCS650X family of which the MCS6502 is probably the best
known. This flew to fame with the rise of the microcomputer in the
1980s. It was basically an enhancement of the Motorola MC6800 and
follows the 8-bit trend of a 16-bit address bus and a single +5 V power
supply. Its contribution to progress was the idea of pipelining. Two
billion 6502s were sold.
162
The development of microprocessors and microcontrollers
Returning to the plot
The 6502 was said to be  accumulator-based in that it has no general
purpose registers and a single accumulator through which all the
incoming and outgoing data is passed but with pipelining and some
fast instructions  it was very popular for a few years. In comparing
Figure 11.6 with Figure 11.5 we can see the influence of the MC6800.
Most of the blocks are the same. The MC6800 had two accumulators
and one index register and the MCS6502 has two index registers and
one accumulator.
Figure 11.6
MCS6502  an enhancement
of the MC6800
There was little to choose between these microprocessors, as the 6502
had the edge in the microcomputer market while the MC6800 was
more popular in the industrial control field.
163
Introduction to Microprocessors and Microcontrollers
The one-chip microcomputer
To make a stand alone system, the microprocessor would require some
RAM and ROM memory as we saw in Figure 7.6. In many industrial
control situations the size of the memory would not need to be very
large and it occurred to the designers that all these necessary parts
could be built into a single chip. When this occurred the name
microprocessor was superseded by the one-chip microcomputer.
Intel produced the 8048. This was not simply an 8085 + RAM + ROM,
but a new design. It included (yet another) change of instruction code
so it was not compatible with either the original 8080A or the 8085A.
The on-board memory consisted of 1 kbyte of ROM and 64 bytes of
RAM which was quickly doubled to 2 kbytes and 128 bytes on a new
version, the 8049. It could also access 4 kbytes of external ROM. A
further enhancement was a timer. This can count up or down to
provide time delays. Without this, the microprocessor would have to
be used for this function which would prevent it from getting on with
something more useful.
Zilog, of course, were not far behind. It bought out the Z8. This was
similar in concept but slightly upgraded. It had two counter/timers that
could be used for counting incoming pulses as well as providing the
time delays. It had 2 kbytes of ROM and 128 bytes of RAM that it
called general purpose registers. A big improvement was its ability to
access 64 kbytes of external ROM and 64 kbytes of external RAM to
allow the  one-chip to become more than one if needed.
Motorola replied with its MC6801 that included many of the features
of others in its generation. It included 2 kbytes of ROM and 128 bytes
of RAM together with a timer and UART. Its instruction set was
compatible with the MC6800 with a glimmer of 16-bit arithmetic
creeping in.
Rockwell launched their R6500, which was basically a 6502
microprocessor with the addition of 2 kbytes of ROM and 64 bytes of
Figure 11.7
The first four
generations
164
The development of microprocessors and microcontrollers
RAM. One interesting feature was that the internal RAM had a separate
power supply in the form of a battery so that the data wasn t lost during
a power failure. It also included a universal asynchronous receiver/
transmitter (UART) that we will save for Chapter 15. The first four
generations of microprocessors are shown in Figure 11.7.
The microcontroller
As the home computer was being developed, the headlines were only
interested in the ever-increasing speed and capability of the micro-
processors. However, behind the scenes, the microcontroller was
selling in greater numbers with little publicity. There is not much in the
way of attention-grabbing headlines in a microcontroller being fitted
into a video recorder.
The mammoth engines of today s computers were just not required for
many uses in the real world. We are the limiting factor when it comes
to everyday uses of microelectronics. We may want our computers to
work faster but we still work at the same speed that our ancestors. Just
how fast do we want a vending machine to work? We want it to work
at the same speed today as it did yesterday, or ten years ago. After all
we cannot press the buttons any faster and we don t want the coffee to
fly down the chute at ten time the previous speed.
If we want any change, we may like it to be more reliable. Is the
Pentium 4 any more reliable than the Z80? I doubt it. We would
certainly want it to be cheaper and use less power, and not require a
fan if it thinks about something.
The trend is to rethink what we really want and the answer in the
majority of cases is something much closer to the present day
microcontroller.
We will be coming back to microcontrollers in more detail in Chapters
15 and 16.
Increasing the number of bits
It was inevitable that the 4-bit microprocessor that turned into the 8-bit
should, in turn, grow into a 16-bit microprocessor but first a few
moments to answer a seemingly obvious question.
What do we mean by a 16-bit microprocessor?
The  size of a microprocessor is the width of the data registers, so an
8-bit microprocessor can handle 8-bit numbers. It was traditional that
4- and 8-bit microprocessors had an address bus that was twice the
width of the data registers. This was just a coincidence and doesn t
follow these days since no one wants, or could afford, the memory to
165
Introduction to Microprocessors and Microcontrollers
fully use a 128-bit address bus (the number of locations is more than
3 followed by 38 zeros!)
The other fallacy is that it is necessarily the same as the width of the
data bus. It is not. The Pentium family uses a 64-bit data bus but they
have 32-bit data registers and are therefore 32-bit devices. It uses the
64-bit data bus to load two 32-bit registers at a time. The Power PC
and the Digital Alpha family are real 64-bit devices and have a 128-bit
data bus.
Curiously, the Intel 8088 was a real 16-bit microprocessor but had an
8-bit external data bus. This was to allow it to be compatible with the
cheaper 8-bit circuitry, which had not quite caught up with the idea of
using 16 bits.
Even so, the data registers are not universally accepted as defining the
size of a microprocessor. Some people stick with the data bus to be the
defining size. So, in reference books and catalogues you may find
microprocessors referred to as a different  size to the one you
expected. In this book I will stick with the data register as being the
defining feature.
The 68000 family
The M68000, first produced in 1979 was a VLSI chip employing about
70 000 transistors. The M68000 microprocessor is well known as a
16-bit microprocessor but, in reality, it is a 32-bit device if we stick to
our definition above. It certainly has a 16-bit data bus but the internal
registers are 32-bit although some arithmetic operations can only use
16-bit data. Occasionally this format is called a 16/32-bit processor. It
was in a 64 pin dil (dual-in-line) package, as shown in Figure 11.4, but
even longer. Its length was often its undoing since it could easily snap
in half if you attempted to remove it by prizing up one end of the chip.
It has a 24-bit address bus that can therefore access 16 Mbytes of
memory with a 12 MHz clock frequency.
One feature of M68000 is its pre-fetch action. When an instruction is
being worked on, the microprocessor fetches the next instruction from
memory and stores it in a little queue, ready to be used. This can be done
whenever the present instruction is not using the external address and
data buses. This means that the next instruction is already loaded ready
to go as soon as it is required, thus saving valuable time. It has a total of
seventeen 32-bit general-purpose registers of which eight are data
registers, which can be used as 8-, 16-, or 32-bit registers as required.
One interesting feature is that this microprocessor can operate in two
modes, supervisory and user. The essential difference is that the user
mode has a restricted list of instructions at its disposal. The operating
system can use the supervisory mode and thus use the full set of
166
The development of microprocessors and microcontrollers
instructions but user programs only have access to a restricted range 
enough to run the programs but, hopefully, not enough to screw things
up too much. There is a software route between the two modes if you
really want to change.
The M68000 gave rise to its own family as the basic model progressed.
The main advances are detailed in Figure 11.8.
Figure 11.8
The M68000
family
As true 32- and 64-bit microprocessors have taken over the computing
side, the 68000 family is used increasingly as a high-performance
embedded control for printers and disk drives.
Where do we go from here?
After the early one-chip microcomputer, the decreasing cost of the
design and production of the integrated circuits made it easier to
increase the complexity of the chips.
This has caused the development to diverge along two separate paths:
speed and power or cheap and small.
By heading off in the cheap and small route, we get microcontrollers
that are controlling the operation of most of the instruments and
machines that we use and even playing tunes in greetings cards. We
will meet these in Chapters 15 and 16.
167
Introduction to Microprocessors and Microcontrollers
The never-ending pursuit of more speed and more power for
computers has resulted in the continuous development of larger and
faster microprocessors like the Pentium 4 and its competitors. Each
new design is king for a day, and then overtaken and dispatched to the
museum. What cost a fortune three years ago is thrown out with the
garbage, unwanted. We will look at these here today, gone tomorrow
devices in the next three chapters.
Games machines
If we only needed computers to allow us to handle text on a word
processor, there would be little need for the development that has
occurred in the last ten years  our typing is not getting faster and text
is simple stuff. Introducing coloured pictures does little to increase the
stress levels but things really start to change when we want to have
moving coloured pictures.
We are never satisfied: we want faster-changing, more lifelike images
 with sound effects, of course. Our demands will outstrip the latest
microprocessors almost regardless of their capability.
Many computers are used mostly for playing games and simulations
but because they have other functions they must be designed to
operate across a wide range of fields and not really optimized for any
particular task. This has resulted in the development of the dedicated
games machine. We have a choice of three at the moment  they are
the Nintendo Gamecube, the Playstation and the X-Box.
Nintendo Gamecube
This is the oldest design and, inevitably, the least technically
advanced. It is generally cheap to buy the cube and the games are also
cheap and are most popular amongst users in the lower age groups.
They decided to use a 64-bit, 85 MHz, IBM PowerPC 750Cxe
microprocessor, also called the  Gekko which was its original
codename during the production stages. It is a slightly modified
version of the one used in Macintosh computers and similar to those
described in Chapter 13. The modifications were software additions of
almost forty additional instructions to provide specific help in game
playing but not necessary in the original computer applications.
The quality of the graphics during play can be indicated by the speed
of handling graphic data which is conveniently measured by how
many shapes it is able to draw in one second. In this case the chosen
ATI 162 MHz Flipper GPU (Graphics Processor Unit) has a maximum
speed of 12 million polygons/second  this sounds fast but compared
with the Playstation 2 and the X-box it is not impressive.
168
The development of microprocessors and microcontrollers
The main game storage is a 1.5 GB 3 inch Nintendo optical disk. There
is also a facility for a 64 MB memory card supplied by Panasonic.
Sony Playstation 2
Rather than taking a ready-made microprocessor off the shelf and then
designing a games machine around it, Sony started by designing their
own microprocessor called the  Emotion Engine designed just to run
games programs as fast as possible. This  single job approach allows
the design to be very focused. The microprocessor is surrounded by
the necessary circuitry to provide the necessary inputs and outputs.
The overall blocks are shown in Figure 11.9.
Figure 11.9
Playstation 2
If we load a game from a DVD, the startup information is passed to the
Emotion Engine which prepares the game graphics and sound in either
analog or digital format. It then waits for input instructions arriving
from our controller or through the USB ports.
Inside the Emotion Engine, shown in Figure 11.10, our controller
information arrives through the Input/Output unit and the fun
begins.
Figure 11.10
The Emotion Engine
169
Introduction to Microprocessors and Microcontrollers
Games involve serious numbers of calculations and they can be very
complex. There are two types of calculations: straightforward calcula-
tions (just the sort of thing we could do on a pocket calculator) and
geometric calculations. The ordinary calculations are performed by
the FPU (Floating-Point Unit) and the others are done by the VU
(Vector Unit). So why so many calculations?
Does the car skid on the corner? This depends on how fast you are
telling it to turn, what speed you are driving at, the weather selected
and the car data. What is going to happen if you  accidentally hit a
tree or another vehicle?
These calculations have to be done in real time  if we turn the steering
wheel the car has to respond immediately. The geometric calculations
are performed by the Vector unit, which provides the results of what is
happening on screen. It also prepares the list of events that control
everything that appears on the screen  right down to the path taken by
the wheel that has broken off and the reflection in the driver s mirror.
To a large extent, the final quality of the game experience depends on
the speed of these calculations. Floating point calculations are
performed at more than six billion a second! That is moving.
So, how good is the Playstation 2?
That is too difficult to answer. Instead we can look at the technical
information but there is much more. Does the controller feel good? Are
the games exciting and realistic? Does an hour on the PS2 seem like
minutes or weeks?
Generally, the console is fairly expensive but, having bought it, the
games are cheap(ish). The thinking behind this is we only buy the PS2
once and soon forget how much it cost, especially if it was a gift, but
we can afford plenty of games. Having plenty of games reduces the
attraction of changing to another games machine  like the Xbox.
The Emotion Engine runs at only 294 MHz but these headline speeds
are not a good indication of how fast it can do its job  this also
depends on how well it has been designed for the job. You may
remember that the Gamecube microprocessor was running at
485 MHz, more than 50% faster than the PS2, but look at the drawing
speeds: Gamecube 12 million polygons/sec, PS2 25 million polygons/
sec, double the speed. This compares a general-purpose computer
microprocessor with a dedicated device.
The Microsoft Xbox
The Xbox is the latest offering in this market. They have opted for the
opposite strategy to the Playstation 2 by making the console fairly
cheap but charging more for the games. Presumably, the name of
170
The development of microprocessors and microcontrollers
Figure 11.11
The Xbox
Microsoft together with an attractive upfront price will mean the boxes
are carried out the shops and we will worry about the games later.
They seem to sell to an older group than the other two and perhaps the
price of games may not be such a barrier.
The microprocessor chosen for this machine is the Pentium 3 running
at 733 MHz. They have gone for a standard micro rather than a
specialized design but even so, it has got such power that it can blast
through a game at a good rate. The geometric drawing speed of
textured polygons is 50 million per second or twice the speed on the
PS2 or eight times that of the Gamecube. In all cases, the polygon
count has texture included. The bare polygon is a simple wire-frame
shape without any surface coloring which is essential to provide reality
to the scene.
The North Bridge chip is the central block of the Xbox and provides
interconnections between the other units. It controls access to the
64 MB memory that provides a cache for the use of the CPU (Central
Processing Unit) to store program code and a larger share for the GPU
(Graphics Processing Unit). The North Bridge also sends signals to the
South Bridge chip.
The South Bridge provides all the external inputs and outputs via the
USB and network ports together with the audio signals.
The GPU design shown in Figure 11.12 is called the  nVidia is based
on the GeForce 3 design, another popular computer component. The
graphic processor converts the CPU output into the finished informa-
tion being sent to the CPU or television.
The information about each object on the screen such as its position,
the lighting applied and the surface appearance is prepared together
with two features that are used to decrease the computing power
necessary or to improve the appearance with the same processor. The
Figure 11.12
The graphics chip
171
Introduction to Microprocessors and Microcontrollers
 pixel shader that can apply realistic lighting and surface texture
effects over a whole scene without each individual point being
calculated separately and the vertex program oversees the detailed
changes that are necessary in critical areas. We tend to be very
selective when it comes to details, we would notice the slightest
change in a facial expression yet ignore whole leaves on a tree. By
controlling light and texture characteristics, the vertex shader fills in
details of these small but important changes.
Quiz time 11
In each case, choose the best option.
1 The  size of a microprocessor is determined by the:
(a) width of its data registers.
(b) number of lines in its external data bus.
(c) number of digits in its type number.
(d) width of its address registers.
2 An integrated circuit having 15000 transistors is
classed as a:
(a) LSI device.
(b) SLSI device.
(c) VLSI device.
(d) SSI device.
3 An untextured polygon:
(a) looks like a dinosaur.
(b) is just a wire-frame shape.
(c) has no shape.
(d) is a cube.
4 An L1 cache is usually:
(a) onboard the microprocessor.
(b) constructed from DRAM for maximum speed.
(c) slower than Level 2 cache.
(d) external to the microprocessor.
5 RISC:
(a) means  radical instruction set computer .
(b) has longer instructions and is therefore slower than a CISC
chip.
(c) is part of everyday life.
(d) chips employ a smaller instruction set.
172
12
The Pentium family
The Pentium is a 32-bit microprocessor just like the previous Intel
80386 and 80486 but has been considerably enhanced to improve its
speed of operation. Even the 132 pins of the 80386 have increased to
296 on the Pentium.
Other full RISC chips were being well-received at the time the CISC
Pentium was launched in 1993 and Intel took these new designs into
account but it was boxed into a corner by its own success. It had to
maintain absolute compatibility with the previous 8086, 80286,
80386 and the 80486 together with their numerical co-processors. The
compromise was to use all the RISC while maintaining the CISC codes.
It has over 400 instruction codes. Some are performed by hardware
and some by microcode. Its two million plus transistors have been
incorporated into a superscalar structure. This means that it has
duplicated arithmetic and logic units that can allow it to carry out two
instructions at the same time under favourable conditions.
It was launched at 66 MHz and in its first year became famous as the
microprocessor that couldn t count. There was a flurry of letters in the
computer magazines and a host of  How many Pentiums does it take
to change a light bulb? type jokes. At first, Intel denied there was a
problem even though they must have known about it.  And, no, you
can t have your money back. More letters.  Alright, there is a very,
very small matter of a few division sums. The error actually produced
inaccuracies in the sixth or ninth decimal place in some particular
division sums. This was insufficient error to affect more that a small
173
Introduction to Microprocessors and Microcontrollers
minority of users but it started to undermine confidence in the
Pentium. The real problem was that two errors occurred during its
design at the same time. Either one, on its own, would have been
spotted but the two mistakes served to hide each other. Anyway, it s
been fixed. It only affected the early versions and is no longer
significant.
Over time the speed has increased to 200 MHz with the inevitable
rumours of the Pentium II running at 400 MHz that will support a
100 MHz system clock.
An outline of Pentium operation
See Figure 12.1.
Data and code caches
Connections to the outside world are via a 64-bit external data bus and
a 32-bit address bus. The incoming data that consists of numerical data
and instruction codes are loaded very quickly into two internal caches
 an 8 kbyte data cache and an 8 kbyte code cache. These caches shift
data very rapidly on the internal pathways that are 128 and 256 bits
wide.
Whenever possible, the Pentium uses burst mode to read and write
data. The burst mode system loads a cache for example, with more
data than the width of the data bus. If a cache line is 128 bits wide and
it is fed from a 64-bit data bus, then we could completely fill the line
Figure 12.1
The Pentium
processor
174
The Pentium family
by transferring 64 bits and then another 64 bits. Burst mode loads all
128 bits very rapidly without further intervention from the micro-
processor. Putting more new data into the cache will increase the
chances of the cache holding the required information. This is called
a cache  hit .
Prefetch buffer
The prefetch buffer is a small internal memory that holds a list of
instructions that are waiting to be executed. This ensures that the
instruction decoder is never waiting for a new instruction from the
external (slow) memory and it makes more efficient use of the external
data bus since the new instructions can be loaded whenever the
opportunity arises. When it gets a moment, the Pentium shifts an
instruction from the external program into the cache and transfers one
instruction from the cache into the prefetch buffer and also sends a
signal to the microcode circuit to prepare the code for the next
instruction. So, with all the housekeeping done, the instruction
decoder can be fed with instructions and data at its maximum rate. The
prefetch buffer is actually two independent 32-bit buffers, each
providing input to one of the ALUs.
The instruction decoder
The instruction decoder performs much the same function as in other
microprocessors. It has two outputs that are fed to the two ALUs called
 u and  v .
Arithmetic and logic units
These units are under the control of the aptly named control unit. The
blocks, shown in the diagram as ALU  u and ALU  v are actually five
step pipelines that can operate in parallel to execute two instructions
in a single clock cycle. All commands other than floating point
arithmetic can be executed in the  u pipeline and a more limited
range can be carried out in the  v pipeline. The five-stage pipeline can
speed the throughput to one instruction per clock cycle. In the correct
conditions, both pipelines can be used simultaneously to handle two
instructions in a single clock cycle. Sometimes this is not possible.
Perhaps both instructions need access to the same piece of hardware,
perhaps the result of an instruction is needed before the next
instruction can be started. As a rather simplistic example, if we wished
to add two numbers then divide the result by 10, we cannot start
dividing anything until the first answer is available. One minor
drawback is that instructions cannot overtake each other even if the
second one could have been finished very rapidly and they are not
dependent on each other.
175
Introduction to Microprocessors and Microcontrollers
Floating-point unit (FPU)
For floating-point arithmetic, the FPU has an 8-bit pipeline that is
further enhanced by using a hardware multiplier and divider. This is a
significant advance over the 80486, which was not pipelined in the
FPU. Between them, the pipeline and the hardware, the FPU runs
about ten times faster than the 80486 with equivalent clock speeds.
You may remember from earlier discussions that one of the benefits of
the RISC designs was the use of hardware for the execution of
arithmetic operations.
The  u pipeline has some overlap with the floating-point pipeline so
there are restrictions on the occasions when two instructions can be
executed at the same time.
There are eight FPU registers 80-bits wide, arranged as a stack. Bits 0
to 63 hold a 64-bit mantissa. Bits 64 to 78 hold a 15-bit exponent and
the last bit holds a sign bit.
S Exponent Mantissa
Bit 79 78 64 63 0
Notice how the layout of the floating-point number differs from the
example that we saw in Chapter 4.
Branch prediction
When the program reaches a  branch or  jump instruction, the
microprocessor is sent to another part of the program. These
instructions are usually  conditional as in  jump to address xxxx if the
value in the accumulator is not zero . When this jump happens, the
next few instructions that are loaded into the pipelines are all incorrect
and the pipeline has to be emptied and restocked with the new
information. This is called  flushing the pipeline and causes an
irritating delay of four or five clock cycles.
The branch prediction logic holds about 256 entries in a cache to aid
the Pentium in guessing the next instruction. If we can guess what is
coming next before it happens, then the data and instructions can be
loaded ready to go.
But how do we guess? There are two likely outcomes: either the
branch will be taken and we jump to another part of the program, or
we don t take the branch and we continue with the next instruction.
The branch prediction logic argues that what the microprocessor did
last time, it will probably do again. This is true more often than not.
The reasoning behind this is that when a loop occurs, the program is
sent back to repeat a section several, or many, times. It can only NOT
176
The Pentium family
take the branch once, so on average it will take a branch more often
than it doesn t.
In the cache are stored the instructions immediately before the branch
or jump together with the target address assuming the branch is taken.
It also stores statistical information of how often the branch was taken
in the past. This information is used to predict the likely outcome of
the current situation and is correct for about 85% of the time.
When the branch has occurred, the history information is updated to
make the next guess even better.
General purpose registers
The Pentium has seven general-purpose registers, all 32-bits wide.
One of them is used as an accumulator and to maintain compatibility
with the 80386 and the 80486, it can be addressed as a single 32-bit
register, two 16-bit or four 8-bit registers. There are three other general-
purpose registers that can be similarly split and three that only offer the
choice of 32- and 16-bit use.
Interrupts
The handling of interrupts has not changed beyond all recognition
since we were looking at the Z80.
There are two hardware interrupts available. The NMI or non-
maskable interrupt is activated by the pin voltage going to a logic 1 or
high-level. Immediately on the completion of the current instruction,
the Pentium puts the content of the flag register and the current address
onto the stack. It then goes to the flag register and resets the interrupt
flag to prevent any further interrupts. It then services the interrupt. The
NMI normally occurs as a result of hardware failures to quickly limit
the damage caused.
The IRQ or interrupt request is also activated by the appropriate pin
going to a logic 1 or high-level but in this case remember that it is only
a request and can be blocked by resetting the interrupt flag in the flag
register. If more than one interrupt is received they are checked for
priority and the highest one wins. IRQs are generally initiated by
peripheral equipment such as a printer.
Exceptions
These interrupts are issued by the microprocessor itself and occur
when the microprocessor has found itself in a difficulty that it cannot
resolve.
When an exception occurs, an on-screen message often appears
announcing that an exception has occurred and the Pentium attempts
177
Introduction to Microprocessors and Microcontrollers
the instruction again. Asking the Pentium for an impossible answer
causes some exceptions. This could be  division by zero . Dividing
any number by zero is not possible and the Pentium cannot
respond.
Another one, which often strikes terror into the heart of the user, is
 General Protection Error . The software has sent the Pentium off to an
address that doesn t exist and obviously, therefore, no instructions are
available.
The MMX Pentium
MMX (MultiMedia eXtensions) is an addition to the standard Pentium
designed to increase the speed of multimedia, communications and
other applications where large numbers of repetitive calculations are
required.
It started by analysing a wide range of typical applications: graphics,
video, games, speech recognition etc. Intel was looking for time-
consuming common characteristics. Many were found in which a
fairly simple instruction like changing the colour of a pixel is applied
to a large number of pixels. This gave rise to the idea called SIMD
(Single Instruction Multiple Data). Using SIMD, we can perform the
same operation on multiple bits of data, and this is executed in
parallel. MMX allows eight pixels to be moved around and process
them together. SIMD is the heart of MMX.
MMX technology maintains full compatibility with previous instruc-
tions and has added a further 57 instructions. No danger of the RISC
approach here!
MMX instructions take over control of the eight floating-point registers
and it has a further eight registers for holding addresses, loop control,
data manipulation instructions etc. The floating-point registers are
highly flexible in that the 64-bit mantissa section can be used for eight
separate bytes, four 16-bit words, two 32-bit  doublewords or a single
64-bit  quadword .
Saturation arithmetic
In normal fixed-point arithmetic adding two numbers can cause an
overflow to occur and the msb can be lost. To take a simple example,
adding the number 1 to the byte 1111 would give the result 10000.
This would offer the result of zero and an overflow would have
occurred as seen in Chapter 4. To check for the overflow, the
microprocessor would have to take time out to check the status register
to see if the overflow flag has been set. This is time consuming. When
applied to graphics, perhaps shading, the sudden return to zero may
cause a sudden and unwanted change in colour.
178
The Pentium family
Figure 12.2
Saturation arithmetic
prevents
wraparound
Saturation arithmetic ensures that any increase that would cause a
wrap-around effect of returning the value to zero is prevented (see
Figure 12.2). If we counted up from 0000, the Pentium would allow
the count to proceed normally until it reached the maximum value of
1111 and it would then be held at that value. The colour in our
example would reach black but would be prevented from accidentally
returning to white.
The Pentium 4
As we have mentioned before, one of the limits on operational speed
is the size of the internal components and, until recently the smallest
detail was limited to 0.18 �m. As the competition between the AMD
continued, it was time for the next step as AMD started using 0.13 �m
technology and, as expected, the Pentium 4 also upgraded to the same
technology for the faster versions of 1.8 GHz and above. The operating
voltage has also been reduced from 1.75 down to 1.5 volts allowing
closer spacing and a further increase in speed (and 25% reduction in
cost). The new design has allowed the Pentium 4 to increase its
transistor headcount from 42 million to 55 million increasing the
number of connecting pins to 478. Intel has moved a long way from
the 16 pins of their 4-bit offering in 1972.
Thermal safety
The power dissipation increases as any integrated circuit works faster
and the Pentium 4 is no exception. Now, bearing in mind that the
actual processor circuit is just 10 mm � 10 mm (0.4 square inches) and
consumes 55 watts. We must be very careful to ensure that it doesn t
overheat. This is achieved by using a large heat sink and a cooling fan.
The new Pentium has a thermal safety circuit. If the microprocessor
starts to overheat, the cooling fan will increase its revs and the
operating speed of the microprocessor will decrease. If things get
179
Introduction to Microprocessors and Microcontrollers
serious and it reaches a dangerous level of 69�C (155�F) the thermal
circuit will call it a day and shut down the computer to prevent the
microprocessor from being destroyed.
The system bus
Also called the FSB or Front Side Bus, is 64 bits wide and  Quad
Pumped which is a fancy way of saying that each clock pulse,
presently running at 133 MHz, will shift four lots of data along the bus.
Now, rounding off the figures a bit, 133 MHz � 4 = 533 MHz so the bus
looks like a single 533 MHz bus. Incoming and outgoing information
is stored in the 256 kB level 2 Advanced Transfer Cache which is fed
256 bit wide pathways. Intel calls it  Advanced Transfer Cache which
is not quad pumped though being wider, still matches the speed of the
system bus.
Instruction Decoder, Level 1 Execution Trace Cache and Branch
Predictor
The data that is selected by the predictor is loaded into a buffer and
then passed onto the Instruction Decoder.
At this stage, the incoming instructions are analysed and converted
into an internal code sequence which can be accessed from the Micro
code as we saw when we looked at the Z80180 microprocessor.
Once the instructions have been decoded, up to about 12 000
instructions called  Micro-Operation/Operand or �OP are stored in
order of use, all ready to go. The correct order is much assisted by the
Branch prediction  known by Intel as the Branch Target Buffer (BTB).
This stores previous experience to guess what is likely to happen
next.
Hyper pipeline
As we saw in Chapter 11, the pipeline is the organization of the
microprocessor and not a separate device within the design, so we
don t get a  pipeline block shown in Figure 12.3. The predictor
designs are now very much improved, having had the experience
gained with earlier versions of the Pentium. The better the prediction,
the longer and faster we can risk make the pipeline. So pleased were
Intel with their predictions that they called the new longer pipeline a
 hyper pipeline . For maximum speed we would like a long pipeline so
that many simple steps can be carried out at greater speed but the
overall outcome depends on the predictor circuits making the right
guess. A wrong guess means that the pipeline is loaded with incorrect
data and has to be refilled, or  flushed , which takes valuable time. The
180
The Pentium family
Figure 12.3
The Pentium 4
processor
Pentium 4 now has a pipeline of 20 stages which allow 126
instructions to be in use at a single time which can include up to 48
load and 24 store instructions.
Micro-OP and Memory usage
The �Ops that pour out of the Execution Trace Cache are arranged in
order and they will be a mixture of information to be stored in memory
locations and arithmetic operations. The arithmetic operations are
divided in floating-point operations and integer operations. The
floating-point register deals with moving and storing while the ALU
(Arithmetic and Logic Unit) deals with the more complex operations
such as multiplication of 128-bit numbers and MMX (multimedia
instructions) as we met a little earlier. The SIMD (Single Instruction
Multiple Data) that was applied to the earlier Pentiums have been
extended by an extra 144 instructions. This facility is now called SSE2
(Streaming SIMD Extensions 2 instructions). The general idea is that if
we have to perform an action on many bits of data, it is simpler and
181
Introduction to Microprocessors and Microcontrollers
faster to collect them all together and perform the function on all of
them at the same time.
Rapid Execution Engine
For the integer instructions there are two ALUs clocked at twice the
core processor speed which is a four-fold improvement over the basic
function and provides a data transfer rate of 48 GB/s.
A level 1 data cache handles the data outputs from the ALUs and the
AGUs (Address Generation Units).
Future development
The new Pentium design with speeds over 1.8 GHz and 0.13 �m
technology is given the codename  Northwood that replaces the
previous  Williamette . The Williamette had reached the end of its
development whereas the Northwood is just starting and since it is
already running at 2.8 GHz, the magic 3 GHz chip is imminent, then
we can probably look forward to the even more magic 4 GHz before
the Northwood design is obsolete.
The Celeron
The bold type in computer adverts always shouts about  price and
speed and many people fall into the trap of assuming that a 2.8 GHz
microprocessor is obviously faster than a 2.5 GHz microprocessor.
This is a false assumption but still well established so for this section of
the market there is a demand for a very cheap microprocessor with a
high clock speed.
The solution is to use the Pentium design and cheapen it by taking out
some of the non-essential areas. There have been twelve such versions
to track the Pentium releases during its development. In the 2 GHz
Celeron, the price reduction has been achieved at the expense of
reducing the L2 cache from 512 kB down to 128 kB and the FSB down
from 533 MHz to 400 MHz.
Quiz time 12
In each case, choose the best option.
1 SIMD is:
(a) used in standard Pentiums but not in the MMX versions.
(b) a way of preventing wraparound.
(c) single in-line multimedia data.
(d) single instruction multiple data.
182
The Pentium family
2 Branch prediction logic:
(a) is another name for the prefetch register.
(b) is only used in MMX versions.
(c) saves memory in 85% of occasions.
(d) attempts to guess the future steps to be taken by a program.
3 An exception:
(a) will be ignored if the I flag is set to a high level.
(b) is an unusual branching of the program.
(c) is an interrupt signal generated by the microprocessor.
(d) occurs whenever the Pentium is surprised by an arithmetic
result.
4 The initials SIMD stand for:
(a) SIM card type D.
(b) Single Instruction Multiple Data.
(c) Superscalar Instruction Mode for Data.
(d) Streaming Instructions Modular Data.
5 In its construction, the Pentium 4 uses:
(a) 0.13 �m technology.
(b) 1.8 �m technology.
(c) 1.3 �m technology.
(d) 0.18 �m technology.
183
13
The PowerPC
Intel was producing a series of CISC microprocessors and, together
with Microsoft, was in a position to dominate the market. Being
increasingly squeezed out was the traditional king of computers, IBM,
which, at one time, produced more computers that all other
manufacturers combined. Big Blue as IBM was called, on account of
their logo and the blue suits worn by their army of salesmen, laid down
the standard design for the computer that now eclipses all others
designs in the world.
As long ago as the mid-1970s IBM had developed a RISC micro-
processor but it didn t really make it in the market place. RISC did not
 come of age until Acorn produced the ARM 2 and 3 microprocessors
for their Archimedes microcomputer, but this too, failed to muscle its
way into the market as it made little attempt to make it compatible
with Intel code. Acorn, at that time, was introducing the Archimedes as
a replacement for the much-loved BBC microcomputer. By 1990, it
was apparent that the terrible twins, Microsoft and Intel, would take
over the world if no one fought back.
As it happens, this was the very year in which a fledgling company
called  AMD was hatched to grow over the years to become a
persistent irritant to Intel. As yet, Microsoft still rules the world
but there is a system called Linux that may, one day, become
troublesome.
184
The PowerPC
Meanwhile, an alliance was formed between IBM, Motorola and
Apple Computers. To this alliance IBM brought their POWER
microprocessor (Performance Optimized With Enhanced RISC). This
was the successor to the earlier 801 RISC microprocessor and was
chosen because it was a RISC microprocessor and already had
software developed. Motorola would build the chip and Apple would
bring its computer operating system, which was light years ahead of
the Microsoft equivalent at that time. The new family of micro-
processors was to be called the PowerPC series.
The designers took great care to make it attractive to software
companies by being careful to address the problem of future
development. They distinguished between the overall architectural
features that will stay the same throughout the series, rather than how
these features will actually be implemented. This allows the pro-
grammers to know which parts they can rely on to be consistent and
which bits are likely to change. For example, they designed the system
for 64-bit operation even though only 32 bits were to be used in the
early devices.
The PowerPC 601 (or MPC601)
The PowerPC 601 was introduced in 1994 and followed the agreed
PowerPC architecture as shown in Figure 13.1. It used 2.8 million
transistors which is slightly less than the Pentium but many of the
Pentium transistors were tied up with maintaining compatibility with
their earlier microprocessors.
Figure 13.1
The PowerPC 601
architecture
185
Introduction to Microprocessors and Microcontrollers
Many of the blocks shown are familiar after our look at the Pentium.
The 601 is a 32-bit microprocessor using a 64-bit data bus and a 32-bit
address bus.
Bus interface unit
This serves the usual purpose of connecting the data bus and address
buses to the microprocessor. It also acts as a control device to
determine whether the data is to be read into the microprocessor or
written into the external memory.
Cache
This is a single 32 kbyte cache which is shared by data and
instructions. Later versions have increased the total cache available to
provide two separate 32 kbyte caches, one for data and the other for
instructions.
Within the cache, the information is arranged in a series of groups or
lines of 64 bytes. To provide a high-speed link between the cache, the
bus interface unit and the instruction unit and queue, a 256-bit internal
bus is provided.
On many occasions, the result of a particular instruction is not of great
interest in itself but just provides the data to be used for a future
instruction. So when an instruction is completed, the result is stored in
the cache rather than being put back into the main memory. Writing
the result back into the cache is called a  write-back organization as
opposed to  write-through action when the information is sent to the
external memory. This, of course, saves a lot of time since the cache is
about seven times faster than accessing the main memory and a
million times faster than using the hard drive.
Instruction queue and instruction unit
The fast internal bus maintains a queue of up to eight instructions.
Using the normal RISC ideas, all the instructions are the same length
at 32 bits. Eight such instructions can fit across the 256-bit width of the
internal bus.
The function of the instruction unit is to send instructions to the three
pipelines: integer unit, floating-point unit and the branch prediction
unit. With the right mixture of instructions, we can handle three
instructions at the same time. To keep the pipelines busy, it also has the
facility of running some of the instruction out of order. This is limited
to instructions that are not interdependent.
186
The PowerPC
The branch prediction unit
In the Pentium, the branch prediction included analysis of the history
of each branch or jump instruction to help predict whether it is likely
to be taken. The PowerPC uses a single stage pipeline which decodes
and executes in a single clock cycle employing a very much simpler
strategy that curiously seems to work just as well.
It makes no choices. If the branch is sending the program back to an
earlier instruction, it always assumes that the branch will be taken.
This is usually the correct choice since such loops in programs are very
common. On the other hand, if the branch instruction offers the
chance to jump forward, it assumes the branch will not be taken. If the
predictions are correct, instructions are pre-fetched and loaded into
the instruction queue and the correct data is available in the pipelines
and no delay is experienced. If incorrect, the pipeline has to be flushed
and reloaded losing several clock cycles.
In the case of unconditional jumps, the program just tells the
microprocessor to move to another section of the program and no
choice is involved. If the jump is to a distant address, the relevant
instructions may not be in the cache and the cache would have to be
flushed (re-loaded) (see Figure 13.2).
Figure 13.2
Branch prediction
Integer unit and registers
As expected with a RISC processor, there are plenty of registers. In this
section of the 601, we have 32 registers, each 32-bits wide. These
registers are dual-ported. This means that two circuits can access the
registers at the same time without interfering with each other. This is
187
Introduction to Microprocessors and Microcontrollers
like someone reading the back of your newspaper as you are reading
the front  except that registers don t find it irritating.  Port , by the way,
is just a fancy electronic word meaning  connection . Transistors,
generally, have three wires going to them and so are described as
three-port devices.
The integer unit handles all instructions like integer arithmetic bit
manipulation and transferring data to and from the external memory
and is organized into a three-stage pipeline. In Figure 13.3, the second
clock pulse executes the first instruction. The next clock pulse
executes the second instruction and the last clock pulse executes the
third. We have achieved the target of one clock pulse per clock pulse.
And in the fourth clock pulse, we can see the next instruction just
arriving to be decoded immediately after the first write-back.
Figure 13.3
Integer unit
pipeline
Floating-point unit
This has a further 32 registers but in this case, they are 64-bits wide
and to fill a register with a single clock pulse, there is an internal 64-bit
bus connecting it with the cache. The pipeline is five stage: prefetch,
buffer, decode, execution and write-back.
Memory buffer
This acts as a buffer for the external memory. The buffers include two
reads and three writes, each up to 32 bytes. It is also used in writing-
back to the cache.
Big and little endians
The main memory is divided into locations each having its own
address. Each location can hold a single byte of information. If we
wanted to store a 32-bit number, then we would have to utilize four
consecutive locations.
188
The PowerPC
Imagine that we wished to store the 32-bit number
00000000 01010101 00010001 111111112 and we had addresses
24646603H, 24646602H, 24646601H and 24646600H available.
Little-endian format would store the most significant byte in the
highest memory address so, in our example, the data 00000000 would
go into address 24646603H. This is used by Intel microprocessors.
Big-endian, which Motorola uses, works the other way around. The
most significant byte is put in the lowest memory address so, in our
example, the data 00000000 would go into address 24646600H.
These are shown in Figure 13.4. All the PowerPC microprocessors are
switchable to enable little or big-endian to be used.
Figure 13.4
Big and little
endians
PowerPC 970
A large number of PowerPCs have continued to power the Apple-Mac
and IBM desktops and, in addition, support both the UNIX and Linux
operating systems.
The latest offering is the 970 with its 52 million transistors started life
as a 1.8 GHz device and has now progressed to 2.0 GHz. This may
appear slow but it has compensating attributes such as its 900 MHz
bus as opposed to the 533 MHz bus of the Pentium 4.
It is a 64-bit micro so it handles data in 64-bit chunks but remains
compatible with earlier 32-bit designs. It has two level 1 caches, one
for instructions at 64 kB and a data cache of 32 kB, which are
somewhat larger that the Intel product but both companies use a level
2 cache of 512 kB.
As memory size is continuing to increase with each design, the size
of memory that can be directly accessed increases with the move to
64-bit processing. The Pentium 4 can access 40 GB of memory,
which seems excessively large at the moment but there was a time
when 4 MB was something to wonder at. The PowerPC 970 can
handle memory of Star Trek proportions measured in terabytes
(thousands of Gigs).
189
Introduction to Microprocessors and Microcontrollers
Table 13.1 Cache sizes
L1 Instruction L1 Data L2 cache
PowerPC 970 64 kB 32 kB 512 kB
Pentium 4 It s a secret 8 kB 512 kB
For maximum microprocessor speed we need a high clock speed
combined with the maximum use being made of every part of the
microprocessor. The early 8-bit microprocessors would accept the first
instruction and it would pass through the microprocessor being
decoded, then acted upon, then having the results stored before it
considered the next instruction. This meant that each bit of the micro
was doing nothing for much of the time.
Modern micros load many instructions at the same time and split up
the tasks so that as many as possible can be carried out at the same
time to have the minimum time wastage.
As with the Pentium 4, the PPC970 makes use of level 1 caches that,
as is now common, are split into an Instruction cache and a Data
cache. There is also a level 2 cache and an external level 3 cache.
Loading the instructions
The instructions pour down from the Instruction cache at a maximum
rate of eight per cycle, though five is a more likely overall figure. But
this is still fast.
The PP970 uses a very long pipeline and can be handling up to 200
instructions simultaneously. The price of such a long pipeline is that
we must be careful to ensure that it is filled with the most useful
instructions and hence we need to back it up with very effective
branch prediction techniques.
Branch prediction
To obtain the maximum possible speed, the PP970 has devoted a great
deal of resources into its branch prediction. As the instructions are
loaded, the branch prediction circuitry scans the incoming instruction
looking for branch instructions. Every time we meet a branch
instruction that offers a choice of outcome the branch will have to be
accepted or rejected.
The 970 has two branch prediction methods. The first is very similar to
that used in the Pentium 4 and, to over simplify the situation, it follows
the same sort of reasoning as we often adopt in everyday life. If it
190
The PowerPC
usually happens, it is most likely to happen again. The 970 keeps a
record of the previous 16384 branches in its BHT (Branch History
Table) to see how often each choice was made and then this
information is further sorted by a prediction program before it comes
to a final decision.
The second method involves a similar sized table called a Global
Predictor. This method also comes up with a final go/no go for the
branch but it decides by generating an 11-bit vector that stores the
actual execution path taken by the previous eleven fetch groups
leading up to the branch.
So there are two independent mechanisms that make a decision as to
whether the branch should be taken. If they disagree, we need a
referee. This job is performed by a  Selector Table that stores the
success rate for each of the two previous methods for each particular
branch. It then makes the final decision  and it is said (by IBM) to be
very successful, which it probably is.
Handling the instructions
Having combined the incoming instruction stream from the Instruction
cache with the information from the Branch predict, the instruction are
queued and passed to the Decode, Crack and Group Formation Unit.
At this stage, in order to keep the instruction handling speed at a
maximum, this unit takes the instruction codes from the Instruction
cache, decodes them and cracks them into their component parts
called Internal Operations (IOPs). These very small but simple tasks
are passed out to specialized units like the five blocks shown along the
bottom of Figure 13.5.
Figure 13.5
The PowerPC 970
191
Introduction to Microprocessors and Microcontrollers
The IOPs are executed in whatever order that will result in the fastest
throughput and to reduce the complexity of keeping track of the
execution of each and every one, they are organized in groups of five
and then the groups are tracked.
Of the final row shown, there are the arithmetically based block that
handle the vectors, floating point and integer calculations, the load-
store that handles the transfer of data to the memory via the second
level cache and finally the feedback path for the branch prediction
information.
The PC market place
The PowerPC may not be in our PC but it may well be in our car. The
Ford Motor Company has elected to use the PowerPC as first choice
for their engine management computer into the next century.
Quiz time 13
In each case, choose the best option.
1 The maximum number of instructions that the
PowerPC 970 can be dealing simultaneously is:
(a) 200.
(b) 3.
(c) 16384.
(d) 128.
2 Write-back:
(a) reverses the order of the bits of data.
(b) is used to double-check the accuracy of data before use.
(c) is only used in the little-endian system.
(d) stores results in the cache rather than in the external memory.
3 The PowerPC 970 has an internal bus running at a
frequency of:
(a) 64 bits/s although it can run at 32 bits/s.
(b) 512 kB/s.
(c) 900 MHz.
(d) 533 MHz.
4 A register that can be accessed by two circuits at the
same time is referred to as:
(a) a second-level cache.
(b) dual-ported.
192
The PowerPC
(c) a buffer.
(d) a three-ported device.
5 Big endian format:
(a) stores the low byte in the highest address.
(b) stores the high byte in the highest address.
(c) is used in all microprocessors.
(d) is used in a cache but never in the main memory.
193
14
The Athlon XP
This is AMD s competitor to the Pentium and is concentrating the mind
of both companys and greatly benefiting the rest of us.
Competition concentrates the mind as well as improving things for the
customers.
AMD has been creeping up on Intel for several years and finally the
Athlon s 37 million transistors are giving the Pentium a serious
problem. It is usually cheaper and, in many tests, faster. The thought
behind the Athlon is not to compete in terms of clock speed but to go
for real speed by doing more work for each clock cycle. Even so, the
Athlon XP is now competing head-to-head on speed, having matched
the Pentium at 2.8 GHz using the same 0.13 micron technology
though with a different internal design and ensuring (of course) that the
two microprocessors are not pin-for-pin compatible. The Athlon
includes a similar system of protection against thermal overload as in
the Pentium.
An outline of the Athlon XP is shown in Figure 14.1.
Caches
For maximum speed the caches are on-chip. This eliminates the travel-
time delay as the data is moved.
From the external memory and the surrounding hardware, the
incoming information from the system bus is fed into a 64 kB
194
The Athlon XP
Figure 14.1
The Athlon XP
processor
instruction cache and a separate 64 kB data cache. The data cache
feeds data into the L2 cache, which is somewhat larger at 256 kB and
has techniques to ensure that the L2 cache does not duplicate any of
the information stored in the data cache and hence we effectively have
a 384 kB local high speed storage area.
Branch predict
As with all current microprocessors, great care is taken to guess the
likely result in each branch instruction. Such instructions produce,
usually, two alternative routes for the program. They answer questions
like  is the result zero? and the answer will determine what happens
next. If we always wait until the question is answered and only then do
we load the instructions for the next bit of the program there is much
wasted time as we saw in the earlier microprocessor designs. If we
guess correctly, we can already pre-load the next part of the program
and get started on it. The branch prediction circuitry does the guessing.
If it gets it wrong, the old data is ditched and replaced.
Hardware data prefetch
This is a further form of prediction similar in which the incoming
instructions are monitored and, as they are still arriving, the data that
will be needed is guessed at, and loaded into the data cache so the
Athlon loads data before it knows that it will be needed. As with the
branch prediction, incorrect data has to be overwritten but on balance,
it speeds up the data flow.
195
Introduction to Microprocessors and Microcontrollers
Instruction decoders
To make full use of its slower clock speed, the Athlon has three
instruction decoders that can run independently. Each of these can
handle three operations per clock cycle giving an overall throughput
of nine operations per clock cycle, which is still significantly greater
than the six operations per clock cycle of the Pentium.
Pipelines and instructions
The Athlon has three independent integer pipelines and also three
similar floating-point pipelines whereas the Pentium has four pipelines
for integers but only two for floating points.
The three floating-point execution units simultaneously handle:
(a) store and load functions
(b) add functions
(c) multiply functions such as all the Intel MMX (multimedia
extensions) instructions plus AMCs own SIMD (single instruction
multiple data) instructions to provide full support SSE (streaming
SIMD extension) and more lifelike 3D imaging and graphics 
AMD s name for these new instructions is  3D NOW! technology.
(MMX is an Intel trademark; 3D NOW! is an AMD trademark.)
The state of the competition
The Pentium had a  rapid execution engine which had two ALUs
(arithmetic and logic units) for the integer instructions, each clocked at
twice the core processor speed running a front side bus at 533 MHz
whereas the Athlon XP had only a 333 MHz FSB. This continues the
pattern of the Pentium claiming the headline figure for speed. However,
on balance, the Athlon is, by most tests, slightly faster than the Pentium.
An update . . .
That was written yesterday. This morning came the news that Intel has
burst through the 3 GHz barrier (just) with a 3.06 GHz device. This,
they say, includes hyper-threading, a technique that involves splitting
a program into units that can be ran simultaneously. It allows the micro
to run multiple applications at the same time, with the processor
appearing to be two processors. Such multitasking is available in
Windows XP and Linux and probably all their successors. So where
does this leave the future, are we going to go for greater and greater
speeds, or will we develop multi-tasking so we effectively have greater
and greater numbers of micros sharing the work? I have a feeling that
task sharing will be the answer.
It seems likely that Intel is now back out in front.
Exciting times ahead . . .
196
The Athlon XP
Another update . . .
Almost immediately, Athlon has replied with what appears to be
another significant step forward  64-bit computing.
The microprocessor which as yet has been living with the codename
 Hammer will be sold as the more user-friendly name of  AMD Athlon
64 and will be available in mid-2003 and will join the PowerPC 970
in the  64 club. It will be able to run 64-bit, 32-bit and 16-bit
applications without any speed penalty and so avoid the cost of buying
new software.
The only technical information that is included in the initial
announcement is a new bus system using  hypertransport technology
which AMD claims to increase throughput by 50% over existing
designs. Intel will have something to say about that claim, I expect.
The clock speed of the first batch will be little different from the XP,
around the 2.8 GHz, but the design will provide more scope for
development and will be able to run programs at a higher speed.
Really exciting times ahead . . . over 3 GHz clock speeds, 64-bit
computing and multiple instructions being carried out simultaneously.
Sounds good.
The desktop speed Olympics is shared between the PowerPC 970,
Pentium 4 and the Athlon 64 whereas the computer market is
dominated by the IBM clones leaving just a minor role for the
PowerPC 970 in the Apple-Mac. As we saw earlier, the result of any
speed test does depend on the nature of the test. Having said that, and
at the risk of irritating the fans of each, in the race for the overall speed
freak the Athlon 64, when it is available, will appear to be the winner
with the other two virtually shoulder to shoulder a pace behind. But it
depends on the test chosen and we know that any speed king will be
dethroned so very quickly.
A (very) approximate comparison based on the currently available
information is shown in Table 14.1.
Table 14.1
PowerPC 970 Pentium 4 Athlon 64
Clock speed 2 GHz 2.8 GHz 2 GHz
Bus speed 900 MHz 533 MHz 533 MHz
Bits 64 32 64
Process size 0.13/ 0.09 microns 0.13 microns 0.13 microns
Op systems OSX IBM linux Windows Windows
Comparative speed 1988 1984 2372
Max memory Terabytes 40 GB Terabytes
197
Introduction to Microprocessors and Microcontrollers
Quiz time 14
In each case, choose the best option.
1 Compared with the Pentium 4, the Athlon XP design
has:
(a) faster FSB, running at 533 MHz.
(b) the same speed of FSB.
(c) slower FSB, running at 333 MHz.
(d) faster FSB, running at 2.8 GHz.
2 As the Pentium 4 and the Athlon XP are both using
0.13 micron technology:
(a) it does NOT imply any other similarities between the
designs.
(b) they will both run at the same clock speed.
(c) they will have the same number of pins.
(d) the cache sizes are equal.
3 The three floating point execution units in the Athlon
XP simultaneously handle store and load, multiply
functions and:
(a) SIMD functions.
(b) add functions.
(c) divide functions.
(d) 3D NOW! functions.
4 When Branch prediction is correct it:
(a) increases the overall speed of running the program.
(b) increases the length of the pipeline.
(c) decreases the clock speed.
(d) prevents overheating of the microprocessor.
5 The Athlon Instruction cache has a capacity of:
(a) 256 kB.
(b) 32 bits.
(c) 64 kB.
(d) 384 MB.
198
15
Microcontrollers and
how to use them
Getting ready for takeoff
In the 1960s, electronics started to awake from its slumber that had
used thermionic valve technology that was recognizably similar to
circuits that had been built for thirty years. The pace of progress was
gentle. The first semiconductor material was developed and the
transistor came into use in just a few years. The photographic process
used to design and produce the transistor quickly led to simple
integrated circuits and the microprocessor.
The start of the microcontroller
No sooner had the microprocessor and the associated memories
arrived in 1971 than it became obvious that the microprocessor was
always accompanied by other circuits, like input/output devices,
memory and timing circuits so it would be a good move to combine
them into a single device.
We had a choice  we could keep everything general and universal
and call it a microprocessor or design it for a single purpose and call
it a microcontroller.
The multipurpose devices went into computers and even here we had
a choice. Computers were either  microcomputers where price was a
significant feature and these microprocessors had some built-in ROM
and RAM. Soon, however, speed became the main feature as the prices
began to fall and we could afford to equip our homes with computing
199
Introduction to Microprocessors and Microcontrollers
power which equalled many offices of just a few years previously and
the microprocessors became expensive and fast. Speed headlines
drive the publicity machines as home and office computers became
faster and faster. They sold in their millions.
Meanwhile the single-purpose devices, really the descendents of the
early microcomputers, were developed further and made really
cheaply, sold by the billion and were never mentioned. They power
the pocket calculator, video recorders, cameras, microwaves, washing
machines and greetings cards that play music  in fact almost anything
vaguely electronic.
Just a thought
The microcontrollers outnumber the population of the world many
times and as mentioned earlier we are likely to be sharing our homes
with, possibly, fifty of them. They are in every essential industry  food
production, transport, communications, research, weaponry, power
generation, medicine, heating and air conditioning  there is little that
we rely on that does not use a microcontroller. If they learn to
communicate independently of us, they may develop their own
agenda. Now there s a thought.
Most microcontrollers are similar
Once we have learned to drive, most vehicles are easily recognized as
being very similar. We are happy with the general idea and can
concentrate on the minor differences. Microcontrollers are much the
same. Having already become familiar with the basic building blocks
of the simple microprocessor in Chapter 8, we can move very easily
into the microcontroller. It is not surprising then to find that all
microcontrollers are basically very similar.
To give an overall impression of the range of microcontrollers
available we are going to look at three popular ranges. The first is the
8051, probably the most widely used microcontroller, over twenty
years old and continuously developed by many different companies
and showing no signs of fading away. The next is from the AVR
family produced by the Atmel Corporation, one of the leaders in this
field. From this range we look at the AT90S/LS2343 one that is small,
modern and RISC. The final one will be explored in Chapter 16.
The 8051
Probably the transition between the microcomputer to the micro-
controller occurred with the Intel 8048 as we saw in Chapter 11. The
8048 added on-chip RAM, ROM and a timer so it could be used as a
single purpose device such as controlling a keyboard  it was, in fact,
a microcontroller.
200
Microcontrollers and how to use them
With the experience gained by using this, it became apparent that
there was a significant market for a microcontroller.
In 1980, Intel launched the 8051 which, twenty-three years later, is
alive and well. In fact very well indeed. It is probably the most popular
microcontroller ever. It is made by about 44 suppliers.
These suppliers have often added some extra features to make versions
or  variants as they are called particularly suitable for specific jobs.
There are at least 92 variants all compatible with the original code.
Even within variants, there are a series of options that lifts the total
number of members of the 8051 family to several hundred.
Numbering
The device numbering is not very obvious as many microcontrollers are
available from several different suppliers with their own product code.
They then produce a group of basically similar devices with minor
changes like different operating voltages or differing amount of RAM
and ROM on-board memory  these groups are referred to as  families .
The family is given a name which often has little connection with the
product codes. For example, Intel s 8051 family has the family name
of MCS51. This contains the 803X, 805X, 875X and the low power
versions bXC45X and the 8XCX52. As usual the X refers to any figure
or letter in that position.
The situation is further confused (or possibly simplified) by referring to
all of them as  the 8051.
The block diagram of the 8051
The block diagram shown in Figure 15.1 is the family portrait of the
8051 family. There are some features that differ between the family
Figure 15.1
8051 block
diagram
201
Introduction to Microprocessors and Microcontrollers
members, principally the memory configuration  some versions have
less memory and some have none at all. However, we will look at the
operation of our  middle-of-the-road version and worry about the
individual differences later.
The 8051 pinout
As in all micro and digital chips, a line over a pin designation indicates
that it is active low or, put more simply, to use this feature we need to
apply zero volts.
The pinout shown in Figure 15.2 looks, at first glance to be rather
complicated due to the dual use of many pins. This is a common
feature of microcontrollers as a method of reducing the number of pins
to be used. The more pins, the more expensive and the larger the
device. This is bad news for a device often destined to be embedded
within another circuit.
Figure 15.2
Pinout of the 8051
There are variants available that provide the increased number of pins
so that there is a separate pin for each function.
Reset
Regardless of what program is being run, we must always be able to
gain control of the microcontroller just as we must with a micro-
processor. The procedure is just the same. The microcontroller has a
reset pin which, in the 8051, is taken from the bus control block and,
in normal operation must be held to zero volts. When a positive
202
Microcontrollers and how to use them
voltage over 2.0 V is applied to it the microcontroller immediately
returns to its startup memory location, which in this case is 0000H. We
can arrange this to occur automatically when the power is switched on
but we should also provide a reset switch to gain control of the system
at any time without removing the power. This is the  reset switch
which we use when our computer locks up and ignores us.
When changing microcontrollers, remember to check the polarity of
the reset voltage. Compare this circuit in Figure 15.3 with the one
shown in Figure 8.7.
Figure 15.3
The reset switch
Clock input
As we have seen in Chapter 7, we are going to need a clock signal. The
original design of the 8051 called for a 12 MHz crystal though later
versions can run at 33 MHz, 40 MHz or even 44 MHz. As an
alternative, we can use a ceramic resonator or an external signal. The
clock input is shown in Figure 15.4 using a crystal. To use an external
signal throw away the crystal and the capacitors then apply the
external signal to the Xtal1 pin and leave Xtal2 disconnected.
Figure 15.4
The clock
203
Introduction to Microprocessors and Microcontrollers
Ports
We have four ports numbered 0 to 3. In the standard 8051 ports 0, 2
and 3 are dual purpose and port 1 is just an input/output port. In some
variants, all ports are dual purpose.
With regard to the memory, we can use the on-chip memory, which
keeps the circuit as simple as possible and makes the embedding of the
device at its most convenient.
The on-chip memory may be masked ROM or an EPROM which we
met in Chapter 6. To use external memory obviously increases the chip
count but can allow up to 64 kB of memory, which is the standard size
for 8-bit microprocessors.
The external memory is accessed by taking the  external access (EA)
pin to a logic zero. To switch the external ROM on, the output enable
(OE) pin of the external memory is taken low by the program store
enable (PSEN) pin of the 8051. In a similar way, an external RAM is
accessed for reading and writing by the read (RD) and write (WR) pins
applying a logic zero voltage to the output enable (OE) and read/write
(R/W) pins respectively.
Interrupts
The 8051 has a total of five interrupt signals. Two of these can be
externally generated and three are of internal origin. Interrupts are
discussed more generally in the chapter dealing with interfacing but
basically, when an interrupt occurs, the program which is running at
the time is interrupted and another code sequence is ran, called an
interrupt service routine (ISR). When the ISR is compete, the
microcontroller returns to its original program and continues as if the
interruption has not occurred. There is a different ISR for each interrupt
which must be pre-loaded in specific memory addresses, all ready to
go if needed.
What if two interrupts occur at the same time?
The interrupts are checked continuously in what we call the polling
order. Starting from the top, the order in the 8051 is:
External Interrupt 0
Timer 0
External Interrupt 1
Timer 1
Serial port
In addition, each interrupt can be given two levels of priority so if two
interrupts occur, the one with the high priority will be handled first. If
two have the same priority, it is decided by the polling order.
204
Microcontrollers and how to use them
Timer/counters
A timer or counter is a series of bistables or flip-flops that change state
once for every input signal, thus one of these circuits would divide the
input frequency by a factor of two. If this signal is then fed into the next
1
bistable, the output is of the original frequency. The next circuit
4
would have an output of 1/8, then 1/16 and so on.
There are two timers, T0 and T1. These can be programmed to divide
by 256, 8192 or 65536 and will generate an interrupt signal upon
completion that can be detected by the software. One of the modes
allows the timer/counter in 8-bit (divide by 256) mode to reload and
start counting again each time continuously.
The input signal being counted can originate from an external circuit
so it counts the number of incoming pulses, or it can use an internal
signal which is actually 1/12 of the clock frequency in use. As
mentioned above, it generates an interrupt signal when it reaches its
maximum value. We can preload the timer with a number to start
counting from. This will allow the interrupt to be generated after any
required number of events, or time interval.
Serial port
Since the microcontroller normally handles data eight bits at a time, it
is operating in parallel but two receive or transmit serial data we have
perform serial/parallel conversions. This is always achieved by using a
shift register working under the control of a clock signal. The working
of a shift register is described in Chapter 17.
The serial port is able to transmit and receive data, at the same time,
this is referred to as a full duplex system. As the name suggests, the bits
of data are moved one after the other in a continuous stream. Pin 10
is called RXD or receive data and pin 11 is the TXD, transmit data but,
as is often the case, things are not quite that simple.
It can operate in three ways, or modes numbered 0, 1, 2 and 3.
Mode 0
This is the case that spoils the simple RXD, TXD as, in this mode only,
the TXD pin is actually used as a clock signal and the RXD is used to
receive or transmit data. The clock frequency is fixed at 1/12 of the
onboard oscillator frequency and this, of course, determines the speed
at which the data is transferred via an 8-bit shift register.
Mode 1
This mode also sends data in 8-bit lumps but its frequency is adjustable
and operates as an 8-bit UART (universal asynchronous receiver
transmitter  see more about this in Chapter 17). The 8 bits are
205
Introduction to Microprocessors and Microcontrollers
increased to 10 bits buy adding a logic 0 to indicate the start of the
group and a logic 1 to mark the end of the group. This is the normal
format used in RS232 transmissions. Unfortunately, the output voltages
do not comply with the RS232 standards so an external chip must be
added to do the voltage conversion. Some suitable chips are discussed
in Chapter 17.
Mode 2
This is very similar to Mode 1 except the number of bits transmitted is
increased from 10 bits to 11. The extra bit can be used as a parity bit
which is used to check for transmission errors, The pattern is Start bit
(0), 8 data bits, parity bit and stop bit (1). (Have a look at Chapter 17
again.) The transmission rate can be 1/32 or 1/64 of the onboard
oscillator frequency.
Mode 3
This is an 11-bit transmission with a programmable baud rate. The
baud rate is near enough the same as the transmission rate measured
in bits per second.
Watchdog timer
When a microcontroller is embedded in equipment it may find itself
used in areas where electrical interference is a problem. This, or a
software problem can cause the microcontroller to lock up by getting
into an endless loop. The watchdog timer will reset the micro-
controller after a period of time, about 20 milliseconds, unless it is told
not to. Stuck in a software loop, it no longer generates this  don t reset
me signal and so the microcontroller is reset and escapes from the
loop.
The watchdog timer is only fitted into some of the 8051 variants but is
available as a stand-alone chip but is commonplace in newer
designs.
When we want to leave the microcontroller in a continuous loop, we
have a choice of ensuring that the loop contains the required software
code or disabling the watchdog timer before the loop is started.
AVR 8-bit RISC microcontrollers
Taking the AT90S/LS2343 as an example, we can see a really basic
microcontroller with minimal complexity yet having many useful
features that make it inexpensive, small and comparatively fast. The
RISC design and the width of the registers allows the vast majority of
instructions to be executed in a single clock cycle and all the others,
apart from five, are completed in two cycles.
206
Microcontrollers and how to use them
Figure 15.5
AVRAT90S/LS2343
In Figure 15.5, we have a block diagram. It is quite a relief to see that
mostly it is quite familiar after looking at the earlier 8-bit micro-
processors and the 8051 considered in previous chapters. Already we
see that most devices are a combination of one or two innovative ideas
added to a standard mix.
Inputs and outputs
One notable feature of the block diagram, we see only five input/
outputs shown as PortB 0 to 4 so we have only five connections for
data which is a small number until we look at the sister version, the
AT90S/LS2323 which has only three  PortB 0 to 2! Yet they are called
8-bit devices and in previous 8-bit micros we have grown to expect at
least one and sometimes two 8-bit input/output connections. The
answer is just that the  8-bit description refers to the internal data bus
width.
The PortB pins can be used to send data in either direction, they can
be used as inputs or outputs. As is common with other microprocessors
and microcontrollers, the direction of data movement through each of
the PortB lines is individually controlled by a data-direction register.
Loading a  one into the data-direction register will make the
207
Introduction to Microprocessors and Microcontrollers
corresponding PortB line into an output, on the other hand a  zero , of
course, will change it into an input.
Memories
This microcontroller has three memories, or four if we count the
general purpose registers. The loading of the memory storage areas
employs a serial transfer of data and is achieved by the SPI (serial
programming interface).
One ROM storage area is achieved by a Flash memory organized as 1k
� 16. The program instructions are all either 16 or 32 bits wide and can
be cleared and reprogrammed whilst remaining in circuit. It can be
cleared and reprogrammed at least 1000 times. The contents of the
Flash memory cannot be changed by the program being executed by
the CPU and so is free from accidental corruption.
The data is held in an EEPROM, which again can be cleared and
reprogrammed electronically without removal from the device. It only
holds 128 bytes of memory but is able to go through at least 100 000
cycles.
Data corruption can occur in the EEPROM if the supply voltage is
reduced too far but this effect can be avoided by any one of the
following three methods. The first we have already mentioned  use
the Flash memory for critical data. The other two methods are ways to
detect the reduction in voltage and immediately put the micro-
controller into a safe condition. This is often referred to as  brown out
protection . An external circuit detects the falling voltage and applies
a low voltage to the reset pin which effectively switches the chip off
until the supply voltage recovers. The alternative is to put the
microcontroller into a power-down sleep mode which is a power
saving mode which has the effect of preventing any decoding or
execution of any instructions  which, of course, precludes any
 writes to the EEPROM.
It also has 128 bytes of SRAM (Static RAM) for the temporary storage
of data and 32 8-bit general purpose registers that can be connected
two at a time with the ALU (arithmetic and logic unit) which is the
heart of the  brain within the microcontroller.
Clock
The AT90S/LS2343 has an internal RC oscillator which runs at 1 MHz,
4 MHz or 10 MHz depending on the version in use. It is one of the few
of the micro devices that does not make use of an external crystal
although it can use an external clock pulse. This external clock pulse
only requires a single pin and hence we have an extra pin to use as an
output.
208
Microcontrollers and how to use them
Interrupts
There are only three interrupts. The first, and highest priority, is the
reset which is activated by a low voltage applied to pin 1, a power-on
reset or a signal from the watchdog. The next is an external interrupt
request as described in a moment. Lastly, an overflow from the timer/
counter circuit.
Pinout and package
These are shown in Figure 15.6 and we can see that it is available as an
8-pin DIL (dual in line) package which has two lines of pins and also the
surface mount version, plastic gull wing SOIC (small outline IC).
Figure 15.6
AT90S/LS2343
pinout
Pin 1  Active low reset. Must go low for at least 50 ns.
Pin 2  External clock signal input or PortB 3
Pin 3  PortB 4. All lines can sink 20 mA and therefore are able to
power LEDs directly. Sinking means that the LED or other load
is connected between the positive Vcc supply and a low
voltage output at the port.
Pin 4  Ground.
Pin 5  PortB 0 or MOSI. In serial programming mode, MOSI is the
serial data input.
Pin 6  PortB 1 or MISO/INT0. In serial programming mode, MISO is
the serial data output. This pin can also act as the external
interrupt described in the previous paragraph.
Pin 7  PortB 2 or SCK/T0. In serial programming mode, SCK is the
serial clock input. This pin can also provide the timer/
counter0 clock input.
Pin 8  Vcc. The LS version requires a positive supply voltage that
remains in the range 2.7 6.0 V.
Sleep modes
When the microcontroller is not being used, it can switch off some of
its circuitry to save power. Sleep modes are employed in all modern
209
Introduction to Microprocessors and Microcontrollers
microcontrollers and make an enormous difference to the overall life
of an intermittently used device. This enables sealed units in toys and
greetings cards to remain active for months or years.
Idle-mode
To see the benefits, this microcontroller has a normal operating current
drain of 2.4 mA but when switched to the  idle mode, the current falls
to 0.5 mA. It does this by stopping the CPU activity but allows the
timer/counter, watchdog and interrupts to remain operational. This is
about an 80% power reduction but we can do a lot better than that
otherwise my musical socks would have stopped long ago.
Power-down mode
In this mode, only the external interrupt and watchdog (if enabled)
continue to work and current falls to less than 1 microamp, which is
a really impressive reduction in power. The microcontroller can be
aroused from its sleep only by one of the following: an external reset,
the watchdog (if enabled) or INTO external interrupt.
The PIC16F84A
This is another modern RISC development and has many features that
are similar to the AVR that we have just looked at. The AT90S/LS2343
was chosen as representative of the very small and basic micro-
controllers found embedded in many products. This PIC16F84A
example from Microchip Technology is a mid-range device which is
larger and more capable than the AVR.
The PIC series ranges from a really simple 8-pin, 4 MHz micro-
controller on a level with the AT90S/LS2343 that we have just
considered up to a 40-pin 25 MHz device. As mentioned the
PIC16F84A is a mid-size version that has 18 pins and runs up to
20 MHz.
The PICs are designed for easy use and are becoming increasingly
popular as the first step into the world of microcontrollers. Microchip
Technology provides a PICSTART"! PIC development system that
provides, at a very reasonable price, an assembler, compiler, EPROM
and EEPROM programmer, all the hardware manuals and even a
sample PIC to play with. It should be mentioned that other companies
have similar systems compatible with the PIC series and for other
microcontrollers like the AVR and 8051 series.
It has proved to be such an easy, off the shelf, starting point that to
many people  PIC is not only their first choice but is becoming used
as a generic term for any microcontroller.
The general layout of the PIC16F84A is shown in Figure 15.7.
210
Microcontrollers and how to use them
Figure 15.7
PIC16F84A
Supply voltage
The DC supply voltage must remain in the range 2.0 5.5 V for it to
work happily though similar versions such as the PIC16F84 can run
between 2.0 and 6.0 V.
Sleep mode
To save the current drain, a software instruction can put the PIC into a
sleep mode. The supply current is very dependent on the clock
frequency and is normally between 1 and 20 mA and when put to
sleep the drain is reduced to approximately 1 �A.
To obtain the lowest possible sleep current we should hold all I/O pins at
VDD or VSS and disable any external clock and hold the master clear pin
in a logic high state  not in the reset state. The purpose of all this is to
prevent any voltages from floating up and down. If it did so, it would
switch and the technology used results in very low currents drawn
except at the moment of switching during which it causes a really high
spike of current so the higher the frequency, the more often this spike
occurs  hence the increased current.
The microprocessor will wake if: a reset occurs by a logic low voltage
being applied to the MCLR pin, a wakeup pulse arrives from the
watchdog unit (if it is enabled) or an  EEPROM write complete signal.
211
Introduction to Microprocessors and Microcontrollers
Memory
As usual, we have two blocks of memory. One is the program memory
and the other is for data. For maximum speed, they each have a
separate bus connection so that both memories can be accessed
during a single clock cycle.
Program memory
The program memory is situated in the flash memory which is
organized as 1028 � 14. All instructions in the PIC16 series use 14-bit
instructions.
The reset vector points to address 0000H and the interrupt vector is
0004H so address locations 0005H to 03FFH are available for us to
hold our programs.
Data memory
The data area is subdivided into two areas, the FSR (file select register)
and the GP (general purpose registers) as shown in Figure 15.8.
Figure 15.8
Register file map
212
Microcontrollers and how to use them
The SFR (special function register)
This register controls the operation of the CPU and involves such
things as the input and output ports, EEPROM address and data, timer,
program counter and that sort of housekeeping.
All the register files are 8-bits wide and are arranged in two banks
called bank 0 and bank 1. We have to instruct the microcontroller as
to which bank is to be used and this is done by using special
instructions to access some of the page 1 registers. Those accessible
are indicated in Figure 15.8. Microchip Technology are planning to
remove the choice of using the OPTION and the two TRIS registers
and suggest that the STATUS register is used instead. This does not
affect the use with this chip but it will ensure that upgrading in the
future will not require any modifications to the software.
I/O (input/output) ports
All outputs can source or sink 25 mA and can therefore power
significant external circuits without further power amplifiers being
required. Sinking means that the load is connected between the
positive Vcc supply and a low voltage output at the port and sourcing
is connecting the load between a positive output on the pin to the
ground.
PortA and TRISA registers
PortA is a 5-bit wide bi-directional port, each line being individually
controlled so some of the lines can be inputs whilst the others are
outputs. The choice of input or output is made by loading a 0 (output)
or a 1 (input) into the appropriate bit of the data direction register
TRISA.
In common with other devices, when it first starts at power-on, the port
is set as an input. This provides a safer option that running the risk of
random information being sent out to whatever it is connected to.
PortB and TRISB registers
PortB is a 8-bit wide bi-directional port, each line being individually
controlled using TRISB in the same manner as in PortA. Each of the
PortB pins have a weak internal pull-up which can be switched on or
off by the RBPU of the option register. The pull-ups are disabled when
the port is being used as an output and also during power switch-
on.
Any of the Pins RB4 RB7 that just happen to be configured as an input
have an interrupt-on-change feature that can be useful. If any one or
more of these pins have changed logic state since they were last read,
it causes an RB port change interrupt. This interrupt can be used to
wake the microcontroller from its  sleep mode.
213
Introduction to Microprocessors and Microcontrollers
Status register
This is very similar to the one we met when looking at the Z80 in
Chapter 8.
The bits are:
Bit 0 is the C(carry/borrow) bit. 1 = a carry out from the MSB (most
significant bit) of the result otherwise it is cleared to zero. For  borrow
the values are reversed. Subtraction is carried out using the
two s-complement method that we met in Chapter 4.
Bit 1 reflects the carry situation that last occurred from the 4th bit of the
result. This is also called the half-carry bit.
Bit 2 is the zero flag. It is set to ONE when the result of the last arithmetic
or logic operation is ZERO. Be careful not to misread this.
Bit 3 goes to 0 after running the SLEEP instruction.
Bit 4 goes to 0 when a watchdog time-out has occurred.
Bit 5 is used to select between the two memory banks. It is cleared to
0 to access Bank 0 and set to 1 if we need access to Bank 1.
Bit 6 and bit 7  not used. It will be used in the future so by programming
them for 0, future compatibility will be assured. This may save a lot of
time if our program is used on an upgraded version.
Option register
As the name suggests, it offers a series of options. One example is the
control of the prescaler.
The Prescaler
Two functions are affected by the prescaler, they are the timer, TMR0
(timer zero) and the watchdog timer. Each of these circuits provides an
output pulse after the count overflows and restarts from zero. In the
case of the watchdog, the time interval is about 18 ms. If a longer time
interval is needed, we have three alternatives. We can simply switch
the watchdog off but, of course, we lose the benefits of the watchdog
if the microcontroller gets caught in a loop. A simple way is to place
the software code CLRWDT (clear watchdog timer) in the program at
anytime before the end of the countdown so it is reset for another
18 ms and we can repeat this as necessary. Lastly, we can use the
prescaler to reduce the frequency of the incoming pulses and hence
increase the time before the output signal is generated.
Bits 0, 1 and 2 PS2:PS0 (prescaler rate select bits) provide eight
alternative pulse rates for use by the watchdog or TMR0. Setting the
three inputs to 000 will provide a clock signal which is equal to an
external signal or chip oscillator. Changing the setting to 001 will halve
the frequency (or double the time). Increasing the setting to 010 will
214
Microcontrollers and how to use them
decrease the frequency to one quarter of the original. As the count
increases, the frequency will halve for each count until we reach the
maximum bit value of 111 which will cause the watchdog time to
increase by a factor of 128. As it happens, the TMR0 has a divide by
two circuit built in all the time so a setting of 000 will halve the
frequency and the maximum count will reduce the frequency by a
factor of 256.
Bit 3 PSA  (prescaler assignment bit)  Unlike most other PICs, the
prescaler can be applied to the TMR0 or the watchdog, but NOT
both, so the option register controls the choice. Bit 3 of the option
register is set to 0 to prescale the TMR0 and a 1 selects the
watchdog.
The other bits
Bit 4 T0SE (TMR0 source edge select). This controls the moment of
timing the clock input. A  0 increments the count on the low-to-high
transition and a  1 increments on the high-to-low transition.
Bit 5 T0CS (TMR0 clock source select). This decides where the clock
pulses come from. The choices are a  0 to an internal clock as on the
CLKOUT pin and a  1 counts the transitions on the RA4/T0CKI (timer
zero clock input). This option allows pulses to be generated by any
external source like cans of beans moving along the conveyor belt or
the revolutions of an engine.
Bit 6 INTEDG (interrupt edge select). This is similar to bit 4 except we
are controlling the moment at which an interrupt signal is recognized
of the RB0/INT pin. A  0 uses the falling voltage edge and a  1 sets the
rising edge.
Bit 7 RBPU (PortB pull-up enable). This controls the  pull-ups on the
PORTB output. A  0 allows each line to have its own pull-up
enabled or switched off as required. A  1 switches them all off. A
pull-up circuit is shown in Figure 15.9. When the switch is closed by
applying a  0 state to this pin it connects the output to the positive
supply via a current limiting resistor. This ensures that in the absence
Figure 15.9
A pull-up circuit
215
Introduction to Microprocessors and Microcontrollers
of any input data the port will be pulled up to a positive state so that
it doesn t wander about applying unpredictable inputs. The higher
the value of the resistance used, the easier an incoming voltage finds
it to bring the voltage down and this is referred to as a  weak pull-up
like this one. Likewise, a reduction in the resistance value will make
the port input more determined to stay high and this is referred to as
a  strong pull-up.
PCL (program counter low)
PC is the program counter that keeps track of the instruction being
executed at the time. It is a 13-bit register divided into PCL for low byte
and PCH for high byte. Its behaviour is common with other
microcontrollers and microprocessors as described in Chapter 8.
Stack
This register stores the return address when interrupts occur. It stores up
to eight 13-bit addresses. Again, there are more details in Chapter 8.
Register 6 1: PIC16F84A configuration word
This is a special register which is just memory location 2007H which
can only be accessed during programming. Unprogrammed pins are
read as  1 .
It is a 13-bit word with the following options:
Bit 13 4. This protects the program code from being read after the
programming is complete. 1 = no protection 0 = all program memory
is code protected.
Bit 3 Power-up timer enabling. This allows a nominal 72 ms delay when
first switching the microcontroller on to allow power supplies to settle.
The delay can be activated by loading bit 3 with  0 , no delay =  1 .
Bit 2 watchdog timer, disable with  0 , enable with  1 .
Bits 1 0 oscillator selection bits
00 = LP oscillator
01 = HS oscillator
10 = XT oscillator
11 = RC oscillator
Oscillators
The crystal or ceramic resonator options are shown in Figure 15.10
and the crystal oscillators are divided into the frequency ranges:
LP low power crystals 32 kHz 200 kHz.
XT crystal/ceramic resonator 100 kHz 4 MHz.
HS high speed crystal/ceramic resonator 4 MHz 20 MHz.
RC resistor/capacitor.
216
Microcontrollers and how to use them
Figure 15.10
Oscillator options
A note on ceramic resonators
These offer an alternative to crystals for oscillators. They are generally
lighter, more shock resistant and are usually somewhat smaller and
cheaper to buy. The downside is that they do not have quite the
frequency accuracy or stability and in many respects they are
positioned somewhere between an RC network and the quartz
crystal.
An interrupt summary
The PIC16F84A has four sources of interrupts:
(i) External interrupt on the RB0/INT pin.
(ii) TMR0 overflow.
(iii) PortB change detector pins RB7 RB4
(iv) EEPROM data write complete interrupt. This is used only when we
are loading new programs into the EEPROM.
Quiz time 15
In each case, choose the best option.
1 An 8-bit microcontroller has:
(a) an 8-bit data bus.
217
Introduction to Microprocessors and Microcontrollers
(b) eight ports.
(c) an 8-bit address bus.
(d) eight internal registers.
2 Compared with the Pentium 4, a microcontroller:
(a) is faster.
(b) consumes less current.
(c) is more complex.
(d) is larger.
3 A watchdog circuit prevents:
(a) damage due to excessively high supply voltages.
(b) an overrun in timer/counter circuits.
(c) burglars.
(d) wastage of power while the microcontroller is not being used.
4 It is NOT essential for a microcontroller circuit to
include:
(a) registers.
(b) a reset pin.
(c) some memory.
(d) a crystal.
5 The term  ISR refers to an:
(a) immediate service register.
(b) internal system reset.
(c) interrupt service routine.
(d) instruction set register.
218
16
Using a PIC
microcontroller for
a real project
PIC microcontrollers are a very convenient choice to get started in this
field although, as we have seen, there are enormous areas of overlap
between microprocessors and other microcontroller designs.
One convenience is that Microchip Technology has taken the RISC
concept seriously. There are only 35 instructions and, of these, only a
few are required to write quite usable programs.
All data movements are based around just a single register called  W
for  working . This performs much the same function as the accumu-
lator in the earlier processors like the 6502.
Getting started
To program the PIC we need a copy of software instructions and more
details of the register layout.
There is no getting away from the fact that when we first meet a
microcontroller, the information appears overwhelming  not only in
the quantity but in the apparent complexity. This is despite the efforts
of the designers to make it as simple as possible. It is very much like
seeing a new foreign language, which it is really  and tackle it in
much the same way, a bit at a time.
219
Introduction to Microprocessors and Microcontrollers
There are four golden rules which may help:
1 Don t get scared! From time to time, it will seem tempting just to
throw it all away and find something easier to do.
2 Start really simple  one step at a time.
3 Be prepared for it to take a long time in the early stages.
4 When you are feeling low and despondent, remember that everyone
else has felt the same. It will get better. Honest.
The hardware
Let s keep it really simple. We have to buy a microcontroller and
connect it up and then program it.
The device that we are going to use is a PIC16F84A-04/P. The pinout
is shown in Figure 16.1. The number PIC16F84A is the type of
microcontroller. The 04 tells us that the maximum frequency is 4 MHz
and the /P means that it is the standard plastic package. There is no
minimum operating frequency and the slower it runs, the less power it
consumes.
Figure 16.2 shows the most basic circuit. It includes only the chip
supplies and a positive supply to prevent the MCLR (master clear) from
Figure 16.1
Figure 16.2
220
Using a PIC microcontroller for a real project
accidentally resetting the PIC during the program. Unless they are tied
to a definite value all disconnected inputs will float up and down and
can cause random switching.
We need a clock signal and the simplest and cheapest is just an RC
combination. The resistor should be between 5 k&! and 100 k&! and the
capacitor should be greater than 20 pF. The values chosen for this
circuit were not selected carefully and are not critical. In practice, it is
difficult to predict the operating frequency of an RC combination. If we
need a particular frequency it is better to use a variable resistor and
adjust it to give the desired frequency.
Later on, when we have written the program we must tell the
assembler what clock signal we are going to use. This programs the
PIC to expect an RC oscillator. This information can, as an alternative,
be included into the program. It s our choice but it is slightly easier to
do it at the assembly stage but we must remember to do it.
The software
There are three layers of information that we need to use the registers.
Firstly, we need the names and addresses of the files as we met in the
register file map in Figure 15.8. The second step is the function of each
bit in each register, and this is shown in Appendix A, and finally, an
explanation of these functions as we see in Appendix B.
All this data looks daunting but the thing to remember is that we only
use one bit at a time and we can ignore the rest.
All PICs and indeed all microprocessors and microcontrollers use
binary code and nothing else. To make life easier for us, we use
assembly language or a high level language. To use these languages,
we need a program which is able to convert them to binary code.
For assembly language, the required program is called an assembler
and for higher level languages a similar job is done by a compiler.
An assembler is part of the PICSTART PLUS development system but
there are other assemblers available that will handle code for all the
PICs. The code that we write as the input to the assembler is called
 source code and the code that is supplied by the assembler is called
 object code . The object code is really in binary but to make it easier
for us, it is usually displayed on the screen in hex.
Important note
As we type in the program we must not leave any spaces in
instructions or in the data.
221
Introduction to Microprocessors and Microcontrollers
The programming steps
The purpose of our first program
We want to do something really simple but not something that may
have happened by accident. We are going to configure all of PortB as
outputs and then make the output signal to be off, on, off, on, off, on,
off, on. We can connect a series of LEDs to the output pins so alternate
lights will be on.
1 We will start by selecting Bank 1 of the register file map. To do this
we need to talk to the status register, so by referring to Figure 15.8, we
can see that the status register is file 03. From our look at the Status
register in Chapter 15, we can see that bit 5 is the RP0 which controls
the selection of Bank0 or Bank1. The first line of the program must set
bit 5 of register 3.
Program starts:
BSF 3,5 ; Sets bit 5 of register 3 to select Bank1
It is worth mentioning at this stage, that anything written after the
semicolon is just a note for us and is ignored by the assembly program.
This is called the comment field. It is always worth using this area to
explain the program, and this often saves hours trying to remember
what we were attempting to do when we first wrote the program. This
can be an even larger problem if someone else writes a program and
is then off sick and we are left to find out why the program doesn t
work.
2 We now want to arrange for PortB to be an output. This involves
loading a 0 into each of the controlling bits in the data direction
register which we can see from Figure 15.8 is called TRISB and is
register number 86. To do this, we are going to clear the W register
using the CLRW instruction and then copy this zero into register 86.
This involves two extra instructions so, at this stage, our program will
read:
BSF 3,5 ; Sets bit 5 of register 3 to select Bank1
CLRW ; puts a zero into register W
MOVWF 86 ; copies the zero into register 86 which is
; the PortB data direction register
3 Now we have sorted out the direction of the data flow and we can
input the actual data. This time we are going to clear bit 5 of register
3 to allow us to access Bank0. We can now load our data into the W
register. But what is the data? If we assume the LED is going to be
connected between the port output and the zero volt connection, the
voltages corresponding to the light sequence off, on, off, on, off, on,
off, on will be 0V, +5 V, 0 V, +5 V, 0 V, +5 V, 0 V, +5 V and the data will
be 0,1,0,1, 0,1,0,1. We could enter this as a binary number written as
222
Using a PIC microcontroller for a real project
B 01010101 or as the hex number 55 which is a little easier to
read.
Once the 55H is in the W register, we can use the code MOVWF to
copy it into register 06 which in Figure 15.8, we can see is the PortB
data register.
The program is now:
BSF 3,5 ; Sets bit 5 of register 3 to select Bank1
CLRW ; puts a zero into register W
MOVWF 86 ; copies the zero into register 86 which is
; the PortB data direction register
BCF 3,5 ; clears bit 5 of register 3
MOVLW 55 ; this is the output data to give the on, off
; sequence
MOVWF 06 ; this copies the data into PortB
4 As it stands, the micro will perform each of these steps once and
then stop. We have a problem here because it will take only a few
microseconds to complete these instructions  certainly too fast for us
to see if the correct sequence of LEDs are illuminated. We need to give
the micro something to do which will keep the LEDs operational and
our choice here is to reload the output port continuously. Have a look
at our new program:
BSF 3,5 ; Sets bit 5 of register 3 to select Bank1
CLRW ; puts a zero into register W
MOVWF 86 ; copies the zero into register 86 which
; is the PortB data direction register
BCF 3,5 ; clears bit 5 of register 3
MOVLW 55 ; this is the output data to give the on,
; off sequence
again MOVWF 06 ; this copies the data into PortB
GOTO again ; this line forces the micro to return to
; the previous line
The words  again are called labels and the assembler program notices
that the two are identical and replaces them by the correct address.
The fact that we have used  again , a word that makes sense in the
context is just to help us to understand the program, the assembler
would accept  asdf or anything else just as happily. Some assemblers
put restrictions on the names chosen. It may, for example, not allow it
to start with a number, or use certain words or symbols.
5 At the end of the program, we have to put the instruction END to tell
the assembler to stop. It is called an  assembler directive and is there
to tell the assembler program that it has reached the end of our
program. Directives are not instructions to the microcontroller and are
not converted to machine code.
223
Introduction to Microprocessors and Microcontrollers
6 At the start of the program we can use the directive ORG which
means  origin and gives the starting address for the assembled
program. This has been added to our final program. If we had not done
this, the assembler will assume the address to be zero so, in this case
it would make no difference whether we added this directive or left it
out. When the PIC is reset, it always goes to address 000 so if we
wanted the program to start elsewhere we would have to leave a
GOTO instruction at address 000 to tell the microcontroller where it is
to start. Remember that the ORG is only an instruction to the
assembler telling it where to start loading the program  the PIC
doesn t know anything about this because directives are not converted
to the program code.
So our final program is:
ORG 000 ; Program starts at address 000
BSF 3,5 ; Sets bit 5 of register 3 to select Bank1
CLRW ; puts a zero into register W
MOVWF 86 ; copies the zero into register 86 which
; is the PortB data direction register
BCF 3,5 ; clears bit 5 of register 3 to select
; Bank0
MOVLW 55 ; this is the output data to give the on,
; off sequence
again MOVWF 06 ; this copies the data into PortB
GOTO again ; this line forces the micro to return to
; the previous line
END ; the end of our code to be assembled
Notice how the program is written in columns or  fields . It is necessary
to use the correct fields as this tells the assembler what the items are.
Remember to use the semicolon to start notes that we wish the
assembler to ignore.
Connecting the LEDs
For clarity, only one LED is shown but an LED and resistor should be
joined to all the pins 7 13 to show the full output.
LEDs come in different colours and sizes and the cathode must be
connected to a less positive voltage than the anode. The cathode is
generally recognized either by a shorter connector wire or a flat
moulded onto the body.
Component values
Looking at the data for a standard red LED, the typical voltage (Vf)
across them when lit is 2 volts with a maximum current of (If) 20 mA.
The small   stands for  forward . The light lost by reducing the current
f
224
Using a PIC microcontroller for a real project
below its maximum value is not very great and it would be quite
reasonable to operate the LED on, say, 10 mA.
To limit the current flow, a resistor is connected in series. Now, if the
supply voltage for the microcontroller is 5 volts and about 0.7 volts are
 lost inside the PIC and the LED is using 2 volts, the series resistor must
be  using up the other 2.3 volts. The value of the resistor is given by
R = V/I = 2.3/(10 � 10 3) = 230 &!. If in doubt start with 470 ohms and
see how it goes  this is a generally safe value for all situations.
More labels
The use of labels not only makes the program more readable but it
allows modifications to be accommodated. For example, if we put in
the actual address instead of the label and then modified the program
by adding an extra instruction, the actual addresses would all shuffle
along a bit to make room for the new instruction, making our old
address inappropriate. The program would not work and it might take
us hours before we see what we have done whereas a label would be
sorted out by running it through the assembler with the new instruction
added.
There is another useful assembler directive, EQU, which is an
abbreviation for equates or  is equal to . This can be used to make
programs more readable by replacing some of the numbers with
words. For example, register 86 is the PortB Data Direction register but
the program would be easier to read if we replaced the number by the
name. This would be done adding the line: PortBDDR EQU 86 before
the program listing so as soon as the assembler spots the name
PortBDDR it would replace it with 86. This has no affect on the final
program but it makes life easier for us  which has got to be a  good
thing .
If we add some other labels, the final program can now be written
as:
;EQUATES
PortBDDR EQU 86 ; PortB data direction reg.
; is register 86
PortB EQU 06 ; PortB data register is
; register 06
Status EQU 03 ; Status register is register
; 03
RP0 EQU 05 ; Bank1 is selected by bit 5
Data EQU 55 ; Data used is 55H
BSF Status,RP0 ; Sets bit 5 of register 3 to
; select Bank1
225
Introduction to Microprocessors and Microcontrollers
CLRW ; puts a zero into register
; W
MOVWF PortBDDR ; copies the zero into
; register 86 which is the
; PortB data direction
; register
BCF Status,RP0 ; clears bit 5 of register 3
MOVLW Data ; output data to give the
; on, off sequence
again MOVWF PortB ; this copies the data into
; PortB
GOTO again ; this line forces the micro
; to return to the previous
; line
END ; the end of our code to be
; assembled
By making full use of labels, we have rewritten our program without
any numbers at all. This is just a matter of choice  all labels, some
labels or no labels, whatever we like.
Using a crystal
This gives a more accurate clock speed so that programs that involve
real can be written. It may be that we want a display sequence to run
at a particular rate.
To change to a crystal we need to set up the configuration bits in the
PIC so that it knows that it is being controlled by a crystal instead of the
RC method. This is most easily handled during the assembly process
by clicking on  configuration bits and selecting the clock source from
the options offered.
Figure 16.3
A Crystal
Controlled
Clock
226
Using a PIC microcontroller for a real project
The two capacitors shown in Figure 16.3 in the clock circuit always
have equal values and the range shown is suitable for 200 kHz and all
clocks of 2 MHz and over. Other recommended values are: 32 kHz 
68/100 pF and 100 kHz  100/150 pF. The higher values in each range
results in higher stability but slower startup times.
A ceramic resonator can be used as a plug-in replacement for the
crystal.
A modification to the program
In the last program we controlled the voltages to each of the PortB
outputs. With slight modifications we would be able to apply any
combinations of voltages to control any external circuits. Even this first
circuit has significant control capabilities but now we are going to
extend the capability by applying a counting sequence to the output
signals.
All programs are built on the backs of other programs that we have
used before so we can save considerable time by keeping copies of our
successful programs to be recycled whenever possible. This is well
demonstrated in this example.
The program consists of three steps, two of which we have already
designed and tested, so we know it works. If the new program refuses
to work, we don t have to start from scratch, we know two thirds of it
is OK. This is a very powerful method of designing programs and
whole libraries of programs are available so new developments can be
reduced to slotting together ready-made program segments.
When we make changes to a previously program, it is important to
save the new version under a new name so that, in the event of a
disaster, we can retreat and start again.
Here is the section that we have  borrowed from our previous work:
ORG 000
BSF 3,5
CLRW
MOVWF 86 ; PortB data direction = output
BCF 3,5
MOVLW 55
MOVWF 06 ; PortB data set to a start value
At this stage we can, of course, set the start value for the output to any
value between 00H to FFH which is binary B 00000000 to
B 11111111 .
We have only one new instruction to worry about: INCF f,d. It
increments or increases the value of a selected file  f by 1, and where
227
Introduction to Microprocessors and Microcontrollers
the new value goes to is determined by the value of the  d term. If  d
is 0 the new value is put into the W register but if it is 1, the new value
is put back into the register in use.
PortB data register is register 06 so the code INCF 06,1 will take the
current value of PortB data, increase it by 1 and put the answer back
into PortB data so our starting value of 55 will change to 56 and the
output voltages on the pins will change from 01010101 to
01010110.
This was just a single count, but for a continuous count we could use
a label to make the program jump back and do the INCF trick again
and again. When it reaches its maximum value, it will roll over to zero
and start again so the count process can be continuous.
Our program would now be:
ORG 000
BSF 3,5
CLRW
MOVWF 86 ; PortB data direction = output
BCF 3,5
MOVLW 55
MOVWF 06 ; PortB data set to a start value
again INCF 06,1
goto again ; go back and INCF again
end ; end of source code
One more step
The speed at which the count continues is determined by the rate at
which instructions are being followed.
Slowing things down
If we wish to slow things down, we can give the microcontroller
something to do just to keep it busy. We have a NOP instruction
which does absolutely nothing but takes one instruction cycle to do
it. Since it doesn t do anything, it doesn t matter how many we
include in a program, or where we use them. For a significant delay
we made need hundreds, which is not an elegant way of solving a
problem.
In the last modification to the problem, we made it count up on the
PortB register. Now this takes time, so we could use this counting
trick as a time waster. The PIC has 68 general purpose registers that
can be made to count for us. Just choose any one of them and have
it count for a set number of counts and then we can go back and
count once on the PortB register, then go back to the time waste
count. In Figure 16.4, we have loaded a register with a number, say
228
Using a PIC microcontroller for a real project
30H (48 in decimal). The next instruction decreases it by 1 to give
2FH (not 29!!!) and since the answer is not zero, we go around the
loop and decrement it again to 2EH and so on until it gets to zero
whereupon it leaves the loop to carry out  instruction 2 shown in
the figure.
Figure 16.4
Using a
timing loop
The instruction we are going to use this time is INCFSZ f,d. This is
designed just for this type of counting job. It decrements the chosen
register and if d = 0, the result goes into the W register but if it is 1,
it will go back into the same register. For our purposes we would
load the code as DECFSZ 20,1. This would decrement register 20
and put the answer back into register 20. When this register reaches
zero, it will miss out the next instruction to stop it going around the
loop again and will move on to the next instruction.
A slower count
Once again, this uses some of our previous programs.
ORG 000
BSF 3,5
CLRW
MOVWF 86 ; PortB data direction = output
BCF 3,5
MOVLW 55 ; PortB data set to a start value
MOVWF 06
again INCF 06,1
229
Introduction to Microprocessors and Microcontrollers
MOVLW 30 ; Loads W with 30H
MOVWF 20 ; puts the number 30 into file 20
count DECFSZ 20,1 ; decrements register 20
goto count ; keeps decrements until it gets to zero
goto again ; returns to increment PortB
end
For the slowest count on PortB, we would have to increase the count
number in register 20 to its maximum number which, using this
microcontroller is 7FH or 127 in decimal.
Calculating the delay
Starting from the moment that PortB is incremented:
MOVLW takes 1 count.
MOVWF takes 1 count.
DECFSZ takes 1 count normally but 2 when it leaves the loop.
As the register was loaded with the hex number 30, which is 48 in
decimal, it will go around the  count loop 47 times at 1 instruction
clock each and 2 clocks as it leaves the loop. This gives a total of 49
cycles.
goto will be used 48 times at 2 clocks each giving a total of 96
clocks.
goto will also be used once to return to the PortB, this is another 2
cycles.
Finally, INCF takes 1 count to increment the value on PortB.
The total is: 1 + 1 + 49 + 48 + 2 + 1 = 102 cycles
Assuming a crystal frequency of 32 kHz, we can divide it by 4 to give
the instruction clock frequency and then by the delay of 102 cycles to
give the rate at which the PortB is incremented of about 78 counts per
second. PortB counts in binary from 0000 0000 to 1111 1111 and will
finish its count after 256 counts so it will start recounting after 256/78
or roughly 3.3 seconds. We could reasonably double this time delay
by a liberal sprinkling of NOPs or using a longer loop.
Longer delays
We have three alternatives.
1 For small changes, we could add some NOPs inside of the counting
loop to boost the number of counts.
2 Our delay was built into the main program but we could have used
it as a subroutine. A subroutine is any block of code that we may want
to use more than once. In the main program we insert an instruction
CALL followed by a label to identify the block of code so for our delay
loop which we called  count we would insert the instruction  CALL
count at any time we want to use our program to cause a delay. When
230
Using a PIC microcontroller for a real project
the delay loop  count has been completed, we insert the instruction
RETURN at the end of this block of code and the microcontroller will
return to the main program.
The benefit of using a subroutine is that we can run the  count delay
twice just by inserting the instruction CALL count twice in the main
program and we don t have to enter the delay loop again with the fear
that we will mistype something and it will all collapse. We can make
a subroutine as long as we want and use it as often as we want just by
adding the CALL and RETURN instructions.
Here is our previous program but reorganized to use the delay loop
 count as a subroutine.
count DECFSZ 20,1 ; decrements register 20
goto count ; keeps decrements until it gets to zero
RETURN
ORG 000
BSF 3,5
CLRW
MOVWF 86 ; PortB data direction = output
BCF 3,5
MOVLW 55
MOVWF 06 ; PortB data set to a start value
again INCF 06,1
MOVLW 30 ; Loads W with 30H
MOVWF 20 ; puts the number 30 into file 20
CALL count
goto again ; returns to increment PortB
end
The subroutine is called count and has the instruction RETURN at the
end.
The main program has the instruction CALL count which means  go
and get a subroutine and use the one called count .
We can then put:
CALL count
CALL count
CALL count
In the main program which would be an easy way to treble the length
of a delay. We could design a subroutine called  1second and another
for  0.1second .
Then if we needed to insert a delay of 2.3 seconds, we could just
add:
231
Introduction to Microprocessors and Microcontrollers
CALL 1second
CALL 1second
CALL 0.1second
CALL 0.1second
CALL 0.1second
All subroutines would end with the same code RETURN, so how do
they know where they have to go back to?
The answer is a series of memory locations called a stack. Each return
address is stored in the stack in order that each CALL occurs, the
relevant address is sent to the stack and as each RETURN will occur in
sequence, the addresses will be unloaded from the stack in the order
required. This is a first-in last-out (FILO) organization. See Chapter 8
for more on the stack.
A subroutine can include a CALL to another subroutine. These are
called nested subroutines  the PIC16F84A has room in its stack for
eight return addresses  which is pretty small by microprocessor
standards.
3 In the PIC, most instructions are completed in a single instruction
cycle which is 1 of the clock speed. To change the delay, we could
4
always change the clock speed. There are two benefits, a slower clock
speed reduces the power consumed, there is no low-speed limit for the
PIC, unlike some devices. Generally subroutines are preferred as there
are often other constraints on the clock speed.
Quiz time 16
In each case, choose the best option.
1 Return is:
(a) only used as part of a delay loop.
(b) a ticket to take you home again.
(c) an assembly directive.
(d) an instruction found at the end of a subroutine.
2 ORG is:
(a) never needed since the PIC always starts at address 0000.
(b) an assembler directive.
(c) short for orgasm.
(d) an instruction code.
3 An assembler converts:
(a) decimals into hexadecimals.
(b) main codes into subroutines.
232
Using a PIC microcontroller for a real project
(c) source code to object code.
(d) object code into binary code.
4 In choosing a clock circuit:
(a) a ceramic resonator is not as accurate nor so robust as a
crystal.
(b) an RC runs at four times the frequency of a crystal.
(c) a crystal gives the most accurate and stable frequency.
(d) use an RC circuit and a crystal to get accuracy and
robustness.
5 The normal execution time for when using 4MHz
crystal is:
(a) 0.25 microseconds.
(b) 1 millisecond.
(c) 4 milliseconds.
(d) 1 microsecond.
233
17
Interfacing
Interfacing is the process of connecting a microprocessor to the rest of
the circuit or to external devices. Even in the simplest of computer
systems, there is some input device like a keyboard. So how does the
microprocessor know that we have pressed a key? When we send text to
a printer, how does the printer tell us that it is ready for more input?
In a general purpose microprocessor-based system, if it is to do
anything useful, there must be inputs and outputs. The external
devices must therefore communicate with the microprocessor. In some
cases, the microprocessor takes the matter into its own hands and
sends data out as part of its program but even in this case it normally
allows the external device to help.
If a microprocessor-based system were used to heat some water, it is
easy enough to imagine the program switching on the power supply
and sitting there doing nothing for 10 minutes. It would be a better use
of the microprocessor to leave the heater running and wait for a
thermostat to signal that the water has reached the required
temperature. This thermostat signal would arrive at an interrupt pin on
the microprocessor.
Interrupts
Interrupts were introduced in Chapter 8 when we looked at the
operation of the interrupt flag in the status or flag register but we will
now delve a little further into the system.
234
Interfacing
All microprocessors have interrupts that can be initiated either by the
software being run at the time or by external hardware circuits.
Microprocessors differ in the details of their response to hardware
interrupts and in the number of different interrupt pins offered. Details
are always itemized in the technical data supplied with the device.
The likely options are as follows
There are two basic types of hardware interrupt. The first is an interrupt
request or IRQ (or INTR) pin. This tells the microprocessor that it
would like to have some attention. Since it is a request rather than an
order, the microprocessor is free to say  yes or  no or  yes, but not at
the moment  just wait till I m ready . This does not imply any
intelligence on the part of the microprocessor  it must be told which
response to give by the software that is being run at the time. In the
absence of any instruction, it normally accepts the interruption. If a
particular interrupt pin has been told not to respond to an interrupt, we
say that the interrupt has been  masked .
The second type is called a non-maskable interrupt, that is, an
unstoppable demand for attention. This will always assume top-
priority. A typical use for this would be for an emergency shutdown in
the event of a power failure. The program can also instigate an
interrupt by means of a software instruction as part of a program.
What is a hardware interrupt signal?
This is a change of voltage on an interrupt pin generated by the
external device. The change required would be detailed in the
technical data but there are four choices.
The first two choices are changes of voltage level. The pin can sit at
+3.3 V or whatever the  high voltage happens to be, then responds
when it falls to 0 V. We call this  active low . When the pin goes low,
an interrupt is recognized. Alternatively, it could sit at 0 V and become
activated by an increased voltage. This we call  active high .
Figure 17.1
Four ways of
signalling an
interrupt
235
Introduction to Microprocessors and Microcontrollers
The alternative approach is to use the sudden change of level. From
low to high is called  leading edge or  rising edge and from high to
low is the  trailing edge or  falling edge (See Figure 17.1 and have a
glance at Figure 6.4 to see the alternative names.)
Once an interrupt is activated, the signal must be returned to its
normal voltage before it can be triggered again. The input is masked as
the interrupt program is running to prevent the interrupt pin from
interrupting itself if the voltage remains at its active level.
Accommodating several external devices
The simplest and quickest way of connecting devices to the interrupts
of a microprocessor is to have each device connected to its own
interrupt pin. This is OK providing there are enough pins. Few
microprocessors have more than two interrupt pins so we have to
connect several devices to the same pin.
When an interrupt occurs, a program called the  first level interrupt
handler or FLIH is activated. The function of the FLIH is to identify the
device causing the interrupt and to pass the controls over to the
 interrupt handler or  interrupt service routine program that has been
written to deal with that device.
How does it know which device is crying for help? There are two
options, polling and vectored interrupts.
Polling interrupts
This is a slow but sure way. Each possible device is interrogated in turn
with an  is it you? signal until the source of the interrupt is found. The
order of checking is prioritized so the most important device is
checked first.
Vectored interrupts
Immediately after the interruption has occurred, the FLIH puts out a
 who s there? signal and the interrupting circuit puts an identification
signal onto the data bus. This signal is usually used as part of an
address to identify the section of program to be executed.
What happens if an interrupt is received while the previous interrupt
is being dealt with? Again we have a choice. We can disable the
new interrupt until the first one is complete, then deal with the new
one. Alternatively, we can check the priority of the new alarm and
decide on the new priorities. A higher priority causes the present
interrupt to be halted and its current state to be saved in the stack
while the new one is worked on and then we return to unload the
stack information and carry on with the original problem. If the new
236
Interfacing
interrupt is less important it gets a  wait a bit message until the first
one is finished.
In a microprocessor-based system it is up to the designer to decide on
the priorities and uses of the interrupts. In a PC, the interrupts are
prioritized in order of speed and importance. Top priority is given to
the internal clock. This is the clock that tells us the time  not the
square wave clock that synchronizes the circuitry. Thereafter, in order,
we have the keyboard, two spare ones for any other operations, then
comes the serial port, the hard drive, the floppy disk drive and finally
the printer.
Parity
If you were to walk into a crowded room and say  Burgers and nothing
further, many of those present would turn to their neighbours and say
 What was that? and some would just stand and stare. (Some may
even mis-hear and feel offended.) As a form of communication, this is
not very efficient. Try instead, walking in and saying  Lunch will
consist of burgers . Everyone would understand your message.
The first attempt was very efficient in terms of the number of words
used but is probably likely to be inefficient communication since
many people will not receive the message. In the second attempt, we
have used five words to make sure that the one important one gets
through. This is called adding  redundancy . The more redundancy we
add, the more certain is the message but the slower and less efficient
becomes the communication system. Data being returned from space
probes use very high levels of redundancy, over 96%, which allows for
correction of really scrambled signals due to the extremely low power
levels involved.
We can use parity for alerting us to the possibility of an error in a
stream of data or, in some cases, we can detect and correct the error.
In its simplest form, we take a group of bits in a transmission, 4 or 8 bits
are normally used though the idea is applicable to other values. In this
example, we will look at a 4-bit group, say 1001. At the transmitting
end, we add an extra bit on the end, either a 0 or a 1 to make the total
number of  1 s an even number. In this case, there are two  1 s and so
the number is already even, so we add a zero. The data now reads
10010. At the receiving end, if the data has been mutilated and now
reads 11010, a quick count will show that there is an odd number of
 1 s and so an error has occurred.
This simple approach can be easily fooled. If there are two errors there
will be an even number of  1 s and passed as correct. And, another
disappointment, if it shows an error, we cannot tell which bit is wrong
and therefore cannot correct it. When this system is used, an error
signal is sent back to the transmitter requesting a repetition but this
237
Introduction to Microprocessors and Microcontrollers
assumes that the transmitter and the receiver are in communication
with each other. We can modify the system to make limited automatic
correction feasible.
Let s assume we have, say, 16 bits of data to send.
Step 1 Rewrite the data in the form of a square:
0 0 1 0
1 1 1 1
0 1 0 1
1 0 1 1
Step 2 Add parity bits. Across the top row, we have the numbers 0010 which
includes a single  1 . In this system, which we will call  even parity, we
add another  1 if necessary to ensure that there is an even number of
 1 s across the first row. As we have only a single  1 , we add another  1
on the end. It now looks like this:
0 0 1 0 1
1 1 1 1
0 1 0 1
1 0 1 1
The top row now has an even number of  1 s. The next row has four
 1 s which is an even number so we do not need to add another  1 . We
therefore add a  0 :
0 0 1 0 1
1 1 1 1 0
0 1 0 1
1 0 1 1
The third row will be completed with a  0 since it contains an even
number of  1 s and the last row, with three  1 s will need an extra one
to be added. The result is now:
0 0 1 0 1
1 1 1 1 0
0 1 0 1 0
1 0 1 1 1
Step 3 We now have five columns down the page and we can add extra  1 s in
the same way to make the total number of  1 s an even number. The first
two and the last columns each contain two  1 s so zeros will be added.
The third and fourth columns have three  1 s so we need to add an extra
 1 to each. The result is now:
238
Interfacing
0 0 1 0 1
1 1 1 1 0
0 1 0 1 0
1 0 1 1 1
0 0 1 1 0
Notice how we have now got a total of 25 bits to be transmitted. This
represents 16 bits of data and 9 bits added to check the accuracy of the
data. The final serial transmission is 0010111110010101011100110.
This means that 9 out of 25 or 36% of the transmission is not actual
data and represents redundancy.
Let s see how it works. We will assume an error has occurred and one of
the bits is received incorrectly so here is the received transmission:
0010111110010101001100110
Step 1 Layout the data as a 5 5 square.
0 0 1 0 1
1 1 1 1 0
0 1 0 1 0
1 0 0 1 1
0 0 1 1 0
Step 2 Check the parity in each row across the square.
We decided to make each row and column to have an even parity.
The first row has two  1 s, this is even  OK.
The second row has four  1 s, this is even  OK.
The third row has two  1 s, this is even  OK.
The fourth row has three  1 s, this is odd  an error has occurred.
The last row has two  1 s, this is even  OK.
We now know that one of the bits in the fourth row has been received
incorrectly.
Step 3 Do the same for the columns.
The first column has two  1 s, this is even  OK.
The second column has two  1 s, this is even  OK.
The third column has three  1 s, this is odd  an error exists in column
three.
The fourth column has four  1 s, this is even  OK.
The last column has two  1 s, this is even  OK.
Step 4 Isolate the error and change the data.
The error occurs in the third column and the fourth row. Since this is
now known to be an error and we only have a choice of 0 or 1, we can
confidently change the 0 to a 1 and recover the correct data stream.
239
Introduction to Microprocessors and Microcontrollers
0 0 1 0 1
1 1 1 1 0
0 1 0 1 0
1 0 1 1 1
0 0 1 1 0
In this example, we chose to use even parity, that is, we made each
row and column have an even number of  1 s. It would work equally
well if we used odd parity by making the number of  1 s an odd
number. It would also work just as well if we counted the zeros instead
of the ones. If more than one error occurs, it will warn us of an error
but it will be unable to make any corrections. If you try it, you will see
that it indicates four possible positions for the two errors and nine for
three errors.
Example
Correct this received data which includes one error. To provide
automatic correction, odd parity on the  1 s has been used.
The received signal: 1101001001111001010101101.
Step 1 Layout the data as a 5 5 square
1 1 0 1 0
0 1 0 0 1
1 1 1 0 0
1 0 1 0 1
0 1 1 0 1
Step 2 Check the columns and rows for an odd number of  1 s
1 1 0 1 0 '
0 1 0 0 1 '
1 1 1 0 0 '
1 0 1 0 1 '
0 1 1 0 1 '
' ' ' ' '
Step 3 Isolate the error
1 1 0 1 0 '
0 1 0 0 1 '
1 1 1 0 0 '
1 0 1 0 1 '
0 1 1 0 1 '
' ' ' ' '
240
Interfacing
Step 4 The data where the column and row intersect is the error. So we simply
change the  1 to a  0 .
Step 5 Strip out the parity bits to recover the original data
11010000111010100110
Data transmission
The most basic way of sending information from one place to another
is simply to connect a wire to both ends of the system and apply a
voltage to one end. By making the voltage vary, we can send different
levels and even speech or music. These are called analogue signals
and have many drawbacks.
The main one is the effect of noise. As the signal travels along a wire
it gets weaker and it has noise induced into it by random electro-
magnetic signals and vibration of the molecules of the conductor. The
overall effect is that the signal becomes degraded and weaker.
The  weaker bit is no problem, we can soon amplify it back to its
original size but the noise is a different matter. The electrical noise has
become embedded into the signal and has permanently distorted it.
Amplifying it will amplify the noise and the signal equally.
We have no problem with digital signals since we know that they
will all be rectangular in shape and so the amplifier can be used to
regenerate the shape of the signal and hence strip out the effects of
the noise. If we are faced with sending something inherently
analogue, like speech or music, our first job is to convert it to a
digital form.
Analog to digital conversion (A to D or ADC or A D)
Inevitably these days, this is taken care of by an integrated circuit of
which there are many different designs. It is quite possible, but totally
uneconomic, to construct our own ADC so it is really a matter of
flicking through the catalogues and choose the most appropriate one
available.
There are several different designs of ADCs, which are based on three
basically different approaches.
Flash converter
The first is called a flash converter or parallel encoder. These use
circuits called comparators. A comparator has two inputs, one is the
analogue voltage being converted and the other is a known reference
voltage.
241
Introduction to Microprocessors and Microcontrollers
All we ask of a comparator is to answer a simple question:  Is the
analogue input voltage higher or lower than our reference voltage? It
answers by changing its output voltage to a logic 1 to mean it is higher
and a logic 0 to mean it is lower. They are so accurate that the chance
of it accepting the two voltages as the same level are extremely slight
and doesn t happen in practice (see Figure 17.2).
Figure 17.2
A comparator
used in a flash
ADC
So how do we use the comparator? If we had three of them with
reference voltages set to 1 V, 2 V and 3 V and then applied the input
voltage of 2.5 V to all of them, the first two would set their outputs to
a level 1 and the last one would be unaffected at logic 0. The logic
levels could be used to generate a binary number to represent 2.5 V.
An input voltage of 2.4 V or 2.9 V would also result in the same
comparators being activated and hence the same output digital signal.
This error occurs in all analog to digital converters. We can reduce the
size of the error by increasing the number of comparators to detail
more levels. Real ones have between 16 and 1024 different levels.
Ramp generators
These are a combination of a binary counter that simply counts up
from zero to its maximum value, perhaps 1024 like the last type. As the
binary count proceeds, a ramp voltage is made to steadily increase. A
single comparator is used to compare the output of the ramp voltage
with the analog voltage being converted. As soon as the ramp voltage
exceeds the input voltage, the comparator signal stops the counter. The
counter output is then the digital equivalent of the analog signal (see
Figure 17.3).
Successive approximation
If we were to use a 3-bit digital signal to convert an analog voltage of
between 0 V and 4 V we could have the 3 bits representing voltages of
4 V, 2 V and 1 V. This is how the circuit responds to an input of 3.5 V.
242
Interfacing
Figure 17.3
An ADC that uses a
ramp voltage
The digits are initially set to 000. The left-hand bit is switched on and
its 4 V is compared with the input. The input is seen to be less than this
so this digit is reset to zero. It then tries the next bit and its 2 V are
compared and found to be less than the input so it remains set. The
digital signal is now 010. The circuit now adds the 1 V from the last
digit. The result is a total of 3 V, which is compared with the input
analog signal. The input of 3.5 V still exceeds the current value of 3 V
so the last bit is set. The final digital output is 011.
The circuit has tried all the available values until it finds the one that
provides the result closest, but less than the input signal. As before, the
more bits we are using, the more accurate is the result.
In checking the specifications of likely ADCs to use, we need to
compare the following criteria.
Quantization error
In the above example using the flash converter, we can see that an
analog input of 3.5 V would provide the same output as would any
value between slightly over 3 V and slightly less than 4 V. This error
243
Introduction to Microprocessors and Microcontrollers
means that small variation in the analog input voltage will be lost. The
size of this error is equal to the space between the comparator
reference voltages.
Changing from eight comparators to 1024, would mean that the
voltage gaps would decrease from 1 V to 7.8 mV as would the
quantization error. Regardless of the method used for A D conversion,
quantization error is always present.
Bits
The more bits, the merrier. Likely values will be between 8 and 16.
Speed
There are two factors here. How often can we get an updated value
for the signal and how well can we follow any changes it is
making? Even if we do not want the signal to be sampled at a very
high rate, we still may want to take a quick sample so that the input
value is unlikely to change very much as the sample is actually
being measured.
For speed, you cannot beat the flash converter. It can sample for a
period as short as 3 ns which compares very favourably with the
typical values of 10 s for the ramp generators and successive
approximation types.
Digital to analog conversion (DAC)
Changing a group of digital bit values to an analog voltage is basically
just the reverse process of the A D conversion that we met in the
previous section.
Most digital to analog converters operate by adding current together
then converting the result into an analog voltage. The binary levels are
used to switch currents on or off.
Let s assume a 4-bit digital signal in which the most significant bit is
made to generate a current of 8 mA and the others produce, in turn, 4,
2 and finally 1 mA. If the digital signal to be converted happened to be
10112, then the first, third and fourth current sources would be
activated giving a total of 8 + 2 + 1 = 11 mA (Figure 17.4).
In some DACs the final output is a changing current but in others it has
been converted to a variable voltage. It just depends on which
integrated circuit you choose to use. In the ones offering a voltage
output, the total current is then passed through a resistor. If we choose
a nice easy value like 1 k , the voltage across the resistor would be
11 mA 1k = 11 V.
244
Interfacing
Figure 17.4
A DAC with a
current or voltage
output
In a similar way, we can see that all binary values between 0000 and
1111 would be converted into voltages between 0 V and 15 V. There
are a couple of specifications that may need to be checked to decide
on which one to use.
Resolution
This is the number of digital bits used to convert into an analog
voltage. Typical values available are from 4 to 18 bits. As the digital
input changes by a single bit, say from 1000 to 1001, the resultant
voltage or current increases by a discrete step. The size of this step is
determined by the number of bits used compared with the maximum
value of the output current or voltage.
For example, if we used 4 bits then this would provide a total of 16
different steps and if the maximum happened to be 8 V, each step will
represent a voltage change of 0.5 V. Thus, a steadily increasing digital
signal will cause the analog voltage to increase in small discrete steps
like a staircase. This is all very similar to the cause of quantization
error.
Speed
The speed of operation is very dependent on the chip being
considered. The conversion times available from an exceedingly fast
1 ns to a sluggish 5 s.
Serial and parallel transmission
In sending information in digital form, we have a choice of using serial
or parallel transmission. In the case of serial transmission, the binary
values are represented by two different voltage levels and are sent one
245
Introduction to Microprocessors and Microcontrollers
after the other along a cable. This is simple but slow. The alternative is
to have several wires and thus be able to send several bits of data at the
same time, one on each conductor.
In a microprocessor-based system, even if it is a one-off, it is usually
better to conform to established standards for the cabling so that other
instruments and circuits can be connected with a minimum of hassle.
Parallel connection
There are several different standards used for parallel connection of
data but one of the most widely used, and most reliable, was produced
by Centronics.
The Centronics system sends eight bits at a time and employs a 36 plug
and socket system. To send data, there are four basic control signals as
well as the eight data lines. It also stipulates a variety of other control
wires that can be used if required.
The important thing to remember about these standards is that you do
not have to use all the connections listed but those that you do decide
to use should conform to the stated specification and be on the correct
pins. This ensures that if the plug is inserted into a new piece of
equipment, it may not work but at least it will not be damaged.
Centronics data transmission
To see how the system works, we will use timing diagrams to show
what happens and when. These diagrams, which all look very similar
at first glance, are shown in all data manuals to show the sequence of
events inside the microprocessor and in the surrounding circuit.
There are a couple of points that are worth mentioning. We have
mentioned the problem of rise time in Chapter 7. You will remember
that we cannot change a voltage level instantaneously. It may not seem
an important delay when we think of switching a light on at home but
when the microprocessor is handling data at millions of bits per
Figure 17.5
Rise and fall time
may be important
246
Interfacing
Figure 17.6
Showing alternative
data levels
second, these delays can be important and is a common cause of
failure in a circuit that  should work. Most waveform diagrams show
the ends of a square wave as sloping lines rather than vertical ones.
In Figure 17.5 we have a positive-going pulse to represent a data value
of 1 but, of course, data could equally well be at 0 V to represent a
binary 0. In cases where we want to show that a level has changed, but
it may go to either level, we redraw the diagram to show both
possibilities at the same time, as in Figure 17.6.
Figure 17.7 shows the process of transferring eight bits of data from a
microprocessor to an external printer or other device.
Step 1 The microprocessor puts the eight bits of data on the data wires.
Step 2 A short delay occurs while we wait for the data voltages to settle on all
the eight wires. Then the strobe pulse occurs to tell the printer or other
accessory that the data is ready. The line over the word strobe indicates
that it is active low. No line would mean active high.
Step 3 The printer starts loading data and the busy line goes high to prevent
more data being sent.
Step 4 When the data has been printed, the busy line goes down to tell the
microprocessor to put the next piece of data onto the data wires.
Figure 17.7
The timing of
Centronics
signals
247
Introduction to Microprocessors and Microcontrollers
The standard allows for many other control wires for other purposes.
In this example, the eight data wires have been used as outputs from
the microprocessor but it is quite possible to use them to carry input
data although this is not allowed for in the design of PCs.
Serial transmission
To send information in serial form requires only a simple communica-
tion link but it is inevitably slower than parallel transmission since the
data is only sent one bit at a time.
UARTs
To convert the parallel data on the data bus of the microprocessor to
a serial transmission we could use a shift register as in Chapter 6. The
modern alternative is to use a chip called a UART (universal
asynchronous receiver/transmitter) or USART (universal synchronous/
asynchronous receiver/transmitter).
These are integrated circuits that convert data from parallel to serial
transmission so instead of having eight wires, each carrying a single bit
at the same time, the serial transmission passes the bits, one at a time
along a single wire. It can also receive eight bits of serial data then pass
it into the microprocessor in a single byte. Parallel transmission is
obviously a lot faster since eight bits are moved at a time but it requires
eight connections. To send a fax signal, for example, would require the
use of eight telephone lines whereas the UART can convert it to a serial
transmission and sent it over a single line at one-eighth of the
speed.
UARTS do a lot more than a shift register. They include parity checking
and buffers to enable it to handle about 16 bytes at a time without
involving the microprocessor. Most transmissions involve the ASCII
code to represent the characters to be transmitted. This is a seven-bit
code to represent each alphanumeric character and a variety of
control instructions. For example, the letter E is 45 in hex which, using
only the lower seven bits, is 1000101. The ASCII code is used in both
parallel and serial transmissions. Each letter and symbol has its own
seven-digit code. A further bit is added on the end to provide a parity
bit or it can be used to swap over to an alternative set of characters to
allow mathematical symbols and Greek letters to be transmitted or, if
unused, can be left at zero. Our letter E would then be represented as
shown in Figure 17.8.
When using ASCII signals in a serial transmission, we need to be able
to tell the receiving apparatus when a particular ASCII character has
been sent. This is easily done in a synchronous system that ensures that
the transmitter and the receiver are locked together running at the
same speed. This is not the easiest way of operating the system owing
248
Interfacing
Figure 17.8
Coding in ASCII
to the difficulties of ensuring the two devices remain synchronous.
Therefore, we tend to operate asynchronously. This means that we
have to send a signal along with each ASCII code to tell the receiver
when the code has started and when it has stopped. Otherwise the
transmitter would send a continuous stream of data and if a bit were
lost, the receiver would get out of step and would misread all
subsequent data.
To get round this problem, a 0 V  start bit is sent at the beginning of the
character and a positive  stop bit is sent at the end. This brings a
seven-bit ASCII code up to a total of 10 bits. The start and stop bits
ensure that there is at least one change of level for each character that
can be used to keep the receiver clock nearly synchronized to the
transmitter for the time taken to receive that character.
For distances over a few metres, we need to use a slightly more
sophisticated transmission system to prevent random noise from
interfering too much. There are several systems in use, the most
popular being those created by the EIA (Electrical Industries
Association).
As with most transmission media, there is a trade off between the
speed and the maximum distance the system can be used for. If you
intend pushing the transmission distance to its maximum value, you
will have to accept a reduced speed. As a rule of thumb, halve the
speed if you double the distance.
RS232C
This is one of the transmission standards created by the EIA committee.
This standard allows for transmissions up to 50 feet (15 m) and at
speeds of up to 20 kbaud (it can actually exceed this speed and
distance but it s not guaranteed). The baud is the measure of the speed
of transmission. It is the number of clock periods per second, which
approximates to the number of bits per second.
The RS232C transmission is balanced at about 0 V. Here s the time to
be careful, the binary one level is a negative voltage (between  5 and
 15 V) and a binary zero level is a positive value between +5 and
249
Introduction to Microprocessors and Microcontrollers
+15 V. This seems upside down compared with all our previous uses of
binary. Our letter E would be transmitted as in Figure 17.9. The
transmitter levels are specified as ą5 V but the receiver limits are 3V.
This allows for a noise spike to be up to 6 V before there is any
possibility of misreading a piece of data.
Figure 17.9
RS232C
transmission
RS423A
This is an improved version having a maximum speed of 100 kbits/s
3
and a maximum cable length of D 4 mile (1.2 km). The transmission
voltages have to be between ą3.6 and 6 V and the receiver can go
down to ą0.2 V.
Changing voltage levels
How do we change the binary or logic values into the RS232 voltage
levels? If you are building a microprocessor-based system then the
most obvious way is to use a pair of integrated circuits called the 1488
(transmitter) and the 1489 (receiver). These integrated circuits have
been around for many years and are simple and reliable. They have a
small snag in that they need 12 V supplies whereas nowadays 5 V
supplies are much more common so you may find some new
transceivers (made by Maxim) more interesting. These only require a
single +5 V supply and generate their own ą voltages for the RS232C
transmission. Each chip contains two transmitters and two receivers
and operate up to 120 kbits/s. The devices are numbered MAX202,
MAX208, MAX220 and MAX232 and others. PCs have a serial port
that provides signals at RS232C levels.
Using RS232C in real life
Most RS232C links are via a 25-pin  D plug or a 9-pin  D plug and
socket (Figure 17.10) but unlike the Centronics which is quite stable
and usually work straight off, the RS232C can be a real nuisance.
Before attempting to communicate, you must ensure that the
transmitter and the receiver are using the same word length and parity
values are set for the same speed of operation. Even then, it may take
250
Interfacing
Figure 17.10
 D connectors for RS232C
some experimenting before they spring into life. The problem is that
there are many more options for the other connections. All have to be
agreed between the receiver and the transmitter. The specifications are
not detailed enough and can lead to different interpretations. It is not
surprising that it is often insufficient to connect an RS232C cable
between two pieces of equipment and switch on. You will need to get
hold of the RS232C connection specification and settle down in a
comfortable chair.
Modems
A modem (MOdulator DEModulator) converts a digital signal into two
audio tones so that the transmission can occur along a telephone line.
Telephones are generally designed to accept frequencies between
300 Hz and 3.1 kHz. This relatively narrow bandwidth was chosen to
allow speech to be transferred with undue loss of quality while
allowing the largest number of calls to be passed along the same cable.
Once the digital signals are on a telephone line then the range is
unlimited.
Choice of systems
A few metres
We can use the raw binary data transmitted over a simple cable (see
Figure 17.11).
Figure 17.11
A very short range
link up
251
Introduction to Microprocessors and Microcontrollers
Tens or hundreds of metres
We can convert the transmitted signal to RS232C or RS423A as
necessary (see Figure 17.12).
Figure 17.12
Around the
building
Unlimited range
Add a modem and link by telephone or optic fibre (see Figure
17.13).
Figure 17.13
Around the
world
An optic fibre link
A piece of optic fibre is a solid piece of glass or plastic. The plastic
fibre is about 1 mm in diameter and is suitable only for short ranges of
a few tens of metres but it has the advantage of being cheap and easy
to use. Its useful range is limited by the clarity of current plastics. The
special silica glass is incredibly clear and hence has much lower losses
and able to be used over any distance, with suitable repeaters. It also
has a much smaller diameter  only about 125 m before the external
protective layers are added.
252
Interfacing
If a light is shone into the end of an optic fibre, it will reflect off the
inner surfaces along the cable. The light source used is a laser
operating in the infrared region of the spectrum. To use it as a means
of sending a digital signal we need to switch the light source on and off
and then detect the flashes of light at the far end of the cable by a
photoelectric cell. The losses can be made up by repeaters just as we
do on copper-based systems, so range of operation is no problem. The
optic fibre does not suffer from any electric noise pickup along the
route and has an enormous bandwidth. In one sense, it is not really
optional because nearly all long distance telephone cables are now
optic fibres. (See Further reading for our companion volume An
Introduction to Fiber Optics.)
If we are constructing our own fibre optic link, all we need to do is to
buy the laser (or light emitting diodes (LEDs)) and the photocells and
some plugs and sockets to connect it all up. It can be used to replace
the copper cable in any of the systems described (see Figure 17.14).
Careful! The infrared light from the lasers can cause immediate and
irreversible eye damage. We must always remember that we are down
to our last pair of eyes.
Figure 17.14
A fibre optic link  any
distance
Data transfer rates
Using a single optic fibre for serial transmission, typical data transfer
rates of 100 Mbytes/s are available up to 10 km. Very high speed data
transfer of 1 Gbyte/s can be achieved up to 100 m using parallel
transmission along a bunch of fibre optic cables.
Quiz time 17
In each case, choose the best option.
1 The fastest design of analogue to digital conversion
is a:
(a) ramp converter.
(b) flash converter.
(c) comparator.
(d) successive approximation converter.
253
Introduction to Microprocessors and Microcontrollers
2 Quantization error can be reduced by:
(a) increasing the number of levels in the ADC.
(b) increasing the speed of the conversion.
(c) using vectored interrupts rather than polling.
(d) using a flash converter.
3 Using the RS232C standard, a binary 0 is most likely
to be transmitted as:
(a)  4 V.
(b) +2 V.
(c)  5 V.
(d) +10 V.
4 A modem is:
(a) a type of USART.
(b) normally connected between the UART and the RS232C
converter.
(c) only used in fibre optic systems.
(d) used to convert digital signals into audio tones for transmis-
sion over telephone cables.
5 This received transmission has sixteen bits of data
and includes an error. It is using odd parity on the
ones in a block of 25 bits:
0000111010111000100110011.
The corrected data is:
(a) 1000111010111000101110011.
(b) 0000111010111000101110010.
(c) 0000111010111000101110011.
(d) 0000111010111000100110011.
254
18
Test equipment and
fault-finding
This chapter is intended to give some pointers towards finding faults in
a microprocessor-based system. This chapter is firmly based on
experience and could equally well have been entitled,  Mistakes I
have made .
What s gone wrong now?
The whole process of fault-finding should be undertaken slowly and
carefully. There is a popular misconception that you have to keep
busy, taking measurements, making adjustments and changing compo-
nents. But, in fact, most of the time is spent just sitting and thinking
(don t forget the last two words!).
Collect the symptoms and write them down. Be wary of other people s
idea of the symptoms. If they have misunderstood what is happening
you could waste hours or days going off at a tangent. If you forget to
write them down, then sooner or later you will be back repeating the
same checks.
Don t make the problem worse
In most cases, a piece of equipment or a circuit fails due to a single
fault. Two simultaneous but unconnected faults are very rare. There
255
Introduction to Microprocessors and Microcontrollers
are two popular ways of converting a small problem into a large one.
These are static electricity and plugs etc.
Static electricity
When two different materials rub against each other, some negative
electrons tend to migrate from one material to the other. This results in
a voltage difference between the two materials. The amount of
voltages can be very high  several thousand volts. If we walk across
a carpet or sit on a plastic covered chair, we can become lethal to an
integrated circuit designed for 5 V. Many integrated circuits have anti-
static precautions built in but they have limited success. There is a
trade-off here in that the better we make the antistatic precautions, the
slower the integrated circuit can switch.
We can overcome the problem by reducing the build up of static by
allowing it to leak away. In carpets, clothes and furniture we can do
this by adding a wax or polish that absorbs and holds a small quantity
of moisture. A slight dampness is a very effective way of preventing
static problems. For this reason, the weather and air humidity is
important. The death rate of integrated circuits tends to vary
seasonally! It is not helped by air-conditioned plant where the
humidity is low. The effect of static electricity on integrated circuits is
difficult to predict. It generally causes small localized failures which
can have very peculiar effects.
Better than spraying ourselves with water, we can take a more high-
tech approach but how far to go in this direction depends on what is
at stake. If we are going to handle a couple of cheap AND gates once
a week, then only the simplest precaution is worthwhile. However,
sitting on a production line plugging in microprocessors will make any
precautions economic.
The simplest method is to have a conducting band clipped around
your wrist with a lead going off to a ground (earthed) point. These
wristbands are made of rubber into which carbon has been amalga-
mated to allow it to conduct slightly. As well as the wristband we can
place a sheet of this rubber on the bench top and ground the bench.
Such antistatic workstations are very effective. A word of warning. Do
not make your own wrist strap from a length of copper wire. This offers
a very low resistance and provides no protection against electrocution
in the event of accidentally touching a power line.
At home, just avoid working on a plastic table or chair or wearing
clothing made from man-made fibres. Natural materials like cotton,
wool and untreated wood naturally absorb some water and are fairly
safe. A nice wooden bench coated with polyurethane varnish is
effectively a plastic bench and should be avoided.
256
Test equipment and fault-finding
Problems with plugs
Many plugs used between pieces of equipment have a large number of
pins. Pulling one of these out with the power connected is going to
disconnect some voltages before others. This can prove fatal for inte-
grated circuits. Either all the supplies must be on, or all should be off so
never plug or unplug anything with the power on. For the same reason,
never remove or replace an integrated circuit with the power on.
Tests we can make without test equipment
Are the power supplies turned on? Do you need two supplies? If you
are using two supplies, are they connected together to keep their
voltages in step with one another? If a ground connection is required,
is it connected?
Most power supplies have floating outputs. That means that a 5 V
supply, for example, will have a 5 V difference between its two terminals
but neither is connected to the ground potential. This means that if we
connect the negative terminal to earth, as in Figure 18.1(a), the other
terminal goes to +5 V. If, on the other hand, we make the connection
shown in Figure 18.1(b), the other terminal will become  5 V.
Figure 18.1
Connecting floating
supplies
Have a look at the soldering if it is visible. It should be smooth and
shiny. Any dull and craggy looking areas are suspect. If the integrated
circuits are plugged into bases rather than being soldered, have a look
to see if they have been inserted the right way round. Unfortunately,
integrated circuit manufacturers take few precautions to prevent this
type of error.
In most integrated circuits, the pins are numbered around the outside
as shown in Figure 18.2. The position of pin 1 is always on the
257
Introduction to Microprocessors and Microcontrollers
left-hand side of the end which has an indentation when viewed from
the top as in Figure 18.2. When looking for the indentation don t be
mislead by a small circular mark where the plastic has been molded.
The printed circuit board usually has either a number  1 or a small
square or other mark to indicate the position of the first pin.
Figure 18.2
Pin numbering of
 dual in line (DIL)
chips
Figure 18.3 shows the pin grid array (PGA) layout. Notice that the
letters skip from H to J because of the possible confusion between I
and 1. The device determines the number of pins. The one shown
happens to be the elderly Intel 80386. The Pentium has 21 pins along
each side.
Simple test equipment
Apart from the standard voltmeter and an oscilloscope the only other
simple piece of gear that may be helpful is the logic probe. It is better
than the average oscilloscope at detecting very short voltage spikes
and is faster to work with than a voltmeter.
Logic probe
A logic probe is a simple instrument that has two power connections
and the other is a conducting tip that can be touched on points of
interest. The general layout is shown in Figure 18.4. There are three
LEDs on it. The first two show the logic states 0 or 1 and the third one
indicates the presence of a high frequency square-wave or a single,
very short duration, pulse, called a  glitch .
258
Test equipment and fault-finding
Figure 18.3
Pin numbering of
Pin Grid Array
(PGA)
Figure 18.4
A logic probe
259
Introduction to Microprocessors and Microcontrollers
Simple tests to make with these pieces of test gear
We can check some of the voltages on the microprocessor pins. If
possible, it is a good idea to check on the actual pins rather than the
base into which it is plugged. Doing this ensures that the base
connections are also OK. It would also find the bent pin shown in
Figure 18.5.
Figure 18.5
Pin bending not
recommended
The likely pins that are worth checking are the ones carrying a dc
voltage like the power supplies and the interrupts. It is worth
keeping an eye on pins that should be at 0 V. When using a
voltmeter, they can sometimes show 0 V when they are discon-
nected and floating. If you use your voltmeter to measure the
voltage between the positive supply voltage and the suspect pin, it
will still indicate 0 V showing that something is clearly amiss. A
logic probe would not be fooled by a floating  zero , it will not
show a logic zero if it is floating.
The next job is to see if the microprocessor is running at all. We can
do this by using the oscilloscope on a clock signal. Assuming that the
clock signal is OK, we must next check that the microprocessor can
follow an instruction and that the address and data bus are being read
correctly.
A good check on the operation of the microprocessor can be
arranged by getting it to do a simple repetitive program consisting of
a permanent  no operation code. A no-operation code will instruct
the microprocessor to do nothing except read the next instruction
from the data bus by simply incrementing the value on the address
bus. This new instruction will be another no-operation code and so
the address bus will be continuously incremented. To provide a
permanent no-op input we can solder or otherwise connect the
required logic codes to the data bus. This is called hard-wiring the
260
Test equipment and fault-finding
Figure 18.6
The address
bus counts up
in binary
data bus. As the address bus counts up in binary the lowest address
line will be switching rapidly between zero and one giving a square
wave output.
If we look at Figure 18.6, we can see that line A1 is running at half the
frequency of line A0. Similarly address line A2 has half the frequency
of A1 and so on all the way along the address pins. If we connect an
oscilloscope to each line in turn, the frequency should reduce steadily.
Check for the halving of frequency on each address line and errors in
wiring like short circuits between address lines will become
apparent.
If we get this far and still things seem wrong, we are into serious fault-
finding.
A serious piece of test equipment
All the previous pieces of test gear have failed when we try to see what
is happening on the address and data buses under real operating
conditions. The oscilloscope cannot watch more than two different
places at the same time but we may need to monitor a larger number,
perhaps 50 or more places and then slowly check the information
back or print it out. An instrument called a logic analyser can achieve
all these functions and much more.
It can answer such questions as:
M' What values actually appear on the address bus when we cause
an interrupt to occur?
M' Is the correct program actually being run?
M' Are there any unwanted voltage spikes occurring?
261
Introduction to Microprocessors and Microcontrollers
The design of a logic analyser is basically a very simple combination
of shift registers. You may remember we looked at shift registers in
Chapter 6. The register was loaded with data and, on each clock pulse,
the data is moved one place to the left or right as required.
Now imagine a shift-right register that can hold 36 bits of data. If we
connect it to A0, the first line of the address bus, and run a program,
the logic values of that address line will be copied onto the shift
register, pass along to the end with each clock pulse and eventually
start to fall out the far end (see Figure 18.7).
Figure 18.7
Now if we had four such registers, we could collect data from any four
parts of a circuit at the same time. For example, we could monitor the
lowest four address lines, which would be called A0, A1, A2 and
A3.
In the centre of the register is a window. This means that we can access
the centre of the shift register at this point to read off the data and to
make comparisons. In Figure 18.8 only the four registers are shown for
clarity. A simple arrangement like this would be referred to as a 4 16
(four by sixteen) logic analyser. In logic analyser specifications, the
number of registers would be spoken of as the number of channels. In
real life, we would never find such a simple arrangement of registers.
Logic analysers could contain, say, 80 channels, each containing
4096-bit shift registers. This would be referred to as a 80 4 kbyte
logic analyser. With one this size, we could monitor any 80 different
points on a microprocessor-based system. Which points we choose are
Figure 18.8
Four shift registers
can make a simple
logic analyser
262
Test equipment and fault-finding
up to us, we could choose the whole of the address bus and the data
bus and some control signals or any other points of interest. The
choice is entirely ours.
If, in Figure 18.8, the four registers were being used to monitor four
address lines, we may be suspicious of the line showing a constant
value of logic 1. This may indicate that this line has become short-
circuited to a positive power supply, or be disconnected and is floating
high. Don t leap off your chair in excitement though  this is only one
explanation. It could happen for these reasons or it could be running
a part of the program where this would be the expected result.
So what about the window?
In the window, the logic analyser will  see a bit of data from each of
the channels. We can load the combination that we are searching for.
For convenience, we enter the values in hex numbers and as the clock
pulses arrive from the microprocessor, the data moves across and is
continuously compared with the number we have entered. When a
match is found, the clock is switched off and the data is  captured . We
can now move backwards and forwards along the registers and see the
operation of the microprocessor  frozen in time.
The benefit of positioning the window in the centre of the shift register
is that it allows us to observe the program action before, as well as
after, the chosen moment.
Extra facilities
A  real logic analyser has some extra facilities, like performing the
capture not on the first time our input is seen but after perhaps the
200th occasion to take care of repetitive loops in the program. They
also allow a  don t care condition on the inputs so in the window of
a 20-channel logic analyser we could enter the hex code 7XXX2. This
would perform a capture on any data that starts with 7H (01112) and
ends with 2H (00102).
A glitch is a very short duration pulse that can occur in logic circuits,
either from external interference or as a result of poor design. They can
cause unwanted switching in the logic circuit and cause the
microprocessor program to crash. They are exceedingly short, just a
few nanoseconds and this makes spotting them very difficult. They are
usually too fast for an oscilloscope but some logic probes have a
 glitch-catcher built in, but they can only tell us that a glitch has
occurred, not when it occurred. This is the information that will be
needed if we are to track down a design problem.
A logic analyser may miss it because the incoming data is sampled
once per pulse and if it misses the glitch it will not be recorded. To
overcome this, the logic analyser can use its own internal clock that is
263
Introduction to Microprocessors and Microcontrollers
Figure 18.9
Glitch catching
running much faster than the system clock so a single logic one may
extend for 10 or 20 bits in the register and a glitch may well be
recorded. Figure 18.9 shows the internal clock running at 10 times the
microprocessor clock. Some logic analysers have a built-in glitch
catcher and use it to capture the correct section of data. As we can see,
the logic analyser is a very useful and sophisticated piece of kit. Using
it, however, is a slow process. There are lots of connections to be made
to the circuit and much sitting and thinking.
Quiz time 18
In each case, choose the best option.
1 Damage due to static electricity:
(a) can only occur in the winter.
(b) is best prevented by wearing wet clothing.
(c) is only possible in carpeted areas.
(d) can be reduced by wearing a grounded wrist strap.
2 If the two power supplies were connected as in
Figure 18.10, the result would be:
(a) smoke pouring from both power supplies.
(b) an output of +5 V but twice as much current.
(c) an output of +10 V.
(d) no output but no smoke either.
Figure 18.10
264
Test equipment and fault-finding
3 The arrow in Figure 18.11 indicates pin:
(a) 2.
(b) 8.
(c) 11.
(d) 16.
Figure 18.11
4 A logic probe:
(a) indicates whether your fault-finding technique is based on
sound reasoning.
(b) can detect the difference between a disconnection and a
grounded connection.
(c) can store a stream of data.
(d) detects the presence of static electricity.
5 A logic analyser quoted as 20 channels x 1024 bits:
(a) will show a four digit hex number in its window.
(b) can monitor any 1024 points at the same time.
(c) would store a total of 1044 bits of data.
(d) can monitor any 20 points at the same time.
265
This Page Intentionally Left Blank
Appendix A: Special function register file
Addr Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Power-on
Reset
BANK 0
00H Uses contents of FSR to address data memory (not a physical register)
01H TMRO 8-bit real-time clock/counter xxxxxxxx
02H PCL Low order 8 bits of the program counter (PC) 00000000
03H Status IRP RP1 RPO TO PD Z DC C 00011xxx
04H FSR Indirect Data Mamory Address Pointer xxxxxxxx
05H PortA    RA4/T-CKI RA3 RA2 RA1 RA0 ---x xxxx
06H PortB RB7 RB6 RB5 RB4 RB3 RB2 RB1 RBO/ xxxxxxxx
INT
07  Unused
BANK 1
81H Option RBPU INTEDG T0CS T0SE PSA PS2 PS1 PS0 11111111
85H TRISA    PortA data Direction ---11111
86H TRISB PortB data Direction 11111111
87H  Unused
88H EECON 1    EEIF WRERR WREN WR RD ---0x000
89H EECON 2 EEPROM control reg. (not a physical register) --------
The full details (85 pages) of absolutely everything about the PIC16F84A (or any other PIC) can be downloaded from
www.microchip.com.
267
Appendix B:
PIC 16CXXX instruction set
Syntax Description Status affected
ADDLW k The contents of the W register are added to an 8-bit number and the C.DC,Z
result put in the W reg.
ADDWF f,d Add the contents of the W and f registers. If d=0 the result goes to W. C,DC,Z
If d=1 the result goes to the f register
ANDLW k The contents of the W register are ANDed with an 8-bit number and Z
the result put in the W reg.
ANDWF f,d AND w with reg f. If d=0 the result goes to W. If d=1 the result goes Z
to the f register
BCF f,b Bit b in reg f is cleared
BSF f,b Bit b in reg f is set
BTFSS f,b If bit b in reg f=0, the next instruction in executed. If it is 1 the next 1 or 2 cycles
instr. is replaced with a NOP
BTFSC f,b If bit b in reg f=1, the next instruction in executed. If it is 0 the next 1 or 2 cycles
instr. is replaced with a NOP
CALL k Call subroutine. Return address (PC+1) is pushed onto stack. The 2 cycle
11-bit immediate address is loaded into PC bits <1:0> The upper bits
of the PC are loaded from PCLATH <4:3>.
CLRF f Register f is cleared and Z flag is set. Z
CLRW Register W is cleared and Z flag is set. Z
CLRWDT Resets watchdog timer and watchdog prescalar TO, PD
COMF f,d Contents of  f are complemented (0"1, 1"0) If d=0 the result goes to Z
W. If d=1 the result goes to f
DECF f,d Contents of  f reduced by 1. If d=0 the result goes to W. If d = 1 the Z
result goes to f
DECFSZ f,d Contents of  f reduced by 1. if d=0 the result goes to W. If d=1 the 1 or 2 cycles
result goes to f. If result = 1, the next instruction in executed. If it is 0
the next instr. is replaced with a NOP
GOTO k The 11-bit immediate address is loaded into PC bits <10:0> The
upper bits of the PC are loaded from PCLATH <4:3>.
INCF f,d If d=0 the result goes to W. If d=1, result goes to f.
INCFSZ f,d Contents of  f incremented. If d=0 the result goes to W. If d=1 the 1 or 2 cycles
result goes to f. If rfesult = 1, the next instruction is executed. If it is 0
the next instr. is replaced with a NOP
268
Appendix B
Syntax Description Status affected
IORLW k The contents of the W register are ANDed with an 8-bit number and Z
the result put in the W reg.
IORFWF f,d The contents of the W register are Inclusive ORed with reg. F. If d=1
resujlt goes back into f
MOVF f,d If d=0, contents of f goes to W reg. If d=1 it goes to f Z
MOVLW k The 8-bit number k goes into W.
MOVWF f Moves data from W register to f register
NOP Does nothing  just a time waster (one cycle period)
RETFIE Return from interrupt. Top of stack"PC, 1"GIE 2 cycle
RETLW k W reg loaded with number , return address"PC 2 cycle
RETURN Return from subroutine. Return address"PC 2 cycle
RLF f,d Contents of  f are rotated left one bit via the carry flag. If d=0 the C
result goes to W. Id=1, result goes back to f. See fig. below
SLEEP Powerdown status bit PD is cleared, Timeout status bit TO is set WDT TO, PD
and prescaler are cleared, oscillator stops and controller goes to
sleep.
SUBLW k W register subtracted from the number k, result goes into W reg. (2 s C, DC, Z
complement method)
SUBWF f,d W register subtracted from the register f. If d=0 the result goes to W. C, DC, Z
If d=1 the result goes to f. (2 s complement method)
SWAPF f,d Upper and lower nibbles of f are exchanged. If d=0 the result goes to
W. If d=1 the result goes to f.
XORLW k W register contents XOR ed with the number k, result goes into W Z
reg.
XORWF f,d W register contents XOR ed with the register f, if d=0 the result goes Z
to W. If d=1 the result goes to f
269
This Page Intentionally Left Blank
Further reading
Bates, M. (2000) The Pic 16F84 Microcontroller. Arnold, London.
Bedford, M. (1996) Jubilee chips, Computer Shopper, December.
Bull, M. (1992) Students Guide to Programming Languages. Butterworth-Heinemann,
Oxford.
Carthy, J. (1996) An Introduction to Assembly Language Programming and Computer
Architecture. International Thomson Computer Press.
Crisp, J. (1996) Introduction to Fiber Optics. Butterworth-Heinemann, Oxford.
Diefendorff, K., Oehler, R. and Hochsprung, R. (1994) Evolution of PowerPC architecture, IEEE
Micro, April.
Digital Equipment Corporation (1996) Hardware reference manual of the Digital Semi-
conductor 21164 Alpha Microprocessor.
Horowitz, P. and Hill, W. (1989) The Art of Electronics. Cambridge University Press,
Cambridge.
Intel (1988) Microprocessor and Peripheral Handbook, Vol. 1.
Krause, J.K. (1997) A Chip off the old block, BYTE, November.
Messmer, H.-P. (1995) The Indispensable Pentium Book. Addison-Wesley, New York.
Peleg, A. and Weiser, U. (1996) MMX technology extensions to the Intel architecture, IEEE
Micro, August.
Predko, M. (1998) Programming and customizing the PIC microcontroller. McGraw-Hill, New
York.
Wideman, G. (1986) Computer Connection Mysteries Solved. H.W. Sams, USA.
www.microchip.com
www.atmel.com
www.intel.com
271
This Page Intentionally Left Blank
Quiz time answers
Quiz time 1 Quiz time 5
1 (c) 1 (c)
2 (a) 2 (a)
3 (c) 3 (d)
4 (a) 4 (d)
5 (d) 5 (c)
Quiz time 2 Quiz time 6
1 (b) 1 (d)
2 (c) 2 (b)
3 (a) 3 (c)
4 (b) 4 (b)
5 (d) 5 (c)
Quiz time 3 Quiz time 7
1 (d) 1 (c)
2 (a) 2 (a)
3 (c) 3 (d)
4 (b) 4 (d)
5 (c) 5 (a)
Quiz time 4 Quiz time 8
1 (c) 1 (b)
2 (c) 2 (a)
3 (a) 3 (b)
4 (b) 4 (a)
5 (c) 5 (c)
273
Quiz time answers
Quiz time 9 Quiz time 14
1 (a) 1 (c)
2 (c) 2 (a)
3 (c) 3 (b)
4 (d) 4 (a)
5 (b) 5 (c)
Quiz time 10 Quiz time 15
1 (b) 1 (a)
2 (b) 2 (b)
3 (d) 3 (d)
4 (c) 4 (d)
5 (c) 5 (c)
Quiz time 11 Quiz time 16
1 (a) 1 (d)
2 (c) 2 (b)
3 (b) 3 (c)
4 (a) 4 (c)
5 (d) 5 (d)
Quiz time 12 Quiz time 17
1 (d) 1 (b)
2 (d) 2 (a)
3 (c) 3 (d)
4 (b) 4 (d)
5 (a) 5 (c)
Quiz time 13 Quiz time 18
1 (a) 1 (d)
2 (d) 2 (c)
3 (c) 3 (c)
4 (b) 4 (b)
5 (a) 5 (d)
274
Index
4004, 151, 159, 160 Assembly language, 126, 131
6500, 164 AT90S/LS2343 microcontroller, 206 210
6502, 162, 163
6800, 160
68000, 166, 167 Base of a number system, 16
6801, 164 Basic, 136 139
8008, 160 BCD, 47 48
80386, 147 Benchmarks, 153, 154
8048, 164 Binary coded decimal (BCD), 47 48
8051 Binary, 14 47
8080 addition, 39, 40
8080A, 160, 162 complementary, 39 43
8085A, 161 converting to other bases, 17 21, 30 36
8088, 160 subtraction, 40 43
system, 16, 17
Bistable see Flip-flop
Accumulator, 103 Branch prediction, 176, 180, 187, 190, 195
ADC, 240 243 Burst mode, 174
Address buffers, 112 Bus interface unit, 186
Address decoder, 92 98 Bus State Controller, 114
Addressing memory, 73, 74, 80, 81, 90 98 Buses, 88
Analog to digital conversion, 240 243 Byte, 22
APL, 146, 147
Arithmetic and logic unit, 101
ASCII, 247 C, 142 144
Assembler, 127 C++, 142 144
275
Index
Cache, 156 Gamecube, 168, 169
Cell, 72, 73 Games machines, 168 172
Central Processing unit (CPU), 100, 101 Gates, 49 60
Centronics data transmission, 245, 246 AND, 52 53
CISC microprocessors, 158, 159 ENOR, 58
Clock generator, 112 EOR, 57 58
Clock signals, 63, 64, 85 88 NAND, 54
Cobol, 139, 140 NOR, 55, 56
Compilers, 134 NOT, 50 52
Complementary numbers, 39 43 OR, 54, 55
CPU, 5 XNOR, 58
Crystal oscillator, 227 XOR, 57 58
General purpose registers, 106
GFLOPS see FLOPS
DAC, 243, 244
Ghost address, 96 98
Data buffer, 110
Gigabyte, 23
Data transmission, 240, 244
GIGO, 119
Denary, 15
Glitch, 257, 262, 263
converting to other bases, 17 21
Digital to analog conversion, 243, 244
Direct memory Access, 115
Hexadecimal, 25 35
Double precision, 47
converting to other bases, 28 35
Doublewords, 178
system, 25 27
DRAM see Dynamic RAM
High level languages, 132 148
Dynamic RAM, 75, 79, 80
Hyper pipeline, 180, 181
EEPROM see Electrically erasable
programmable ROM
Image address, 96 98
Electrically erasable programmable ROM,
Index registers, 109
77, 78
Input/output devices, 89
Emotion engine, 169
Instruction decoder, 101
Enable input, 59
Instruction register, 101
Endians, big and little, 188, 189
Instruction set, 122
EPROM see Erasable programmable ROM
Instruction unit, 186
Erasable programmable ROM, 77 79
Integer unit, 187, 188
Exceptions, 177
Integrated circuit, 5
Excess 127 notation, 46
Interpreter, 137
Exponent, 45
Interrupts, 112 114, 234
Faultfinding, 254 257
Fetch-execute, 118, 119 Java, 144
Flag register, 103 106
Flash converter, 240, 241
Flash memory, 81 Kilobyte, 22
Flip-flops, 62 63
Floating point numbers, 44 46
Floating point unit, 176, 180 Labels, 128 129
FLOPS, 153 Languages:
Fortran, 132 136 APL, 146, 147
Full decoding, 95 Assembly, 126, 131
Future trends, 148, 149 Basic, 136 139
276
Index
C, 142 144 Pentium, 159, 173 182
C++, 142 144 Power PC, 159, 184 197
Cobol, 139, 140 Power PC750Cxe, 168, 169
Fortran, 132 136 Z8, 164
Java, 144 Z80, 99
Lisp, 145, 146 Z80180, 99 119, 162
Machine code, 123 126 Microprogram, 101, 159
Pascal, 141, 142 Microsoft Xbox, 1270 172
Prolog, 147, 148 MIPS, 152, 153
Smalltalk, 139 MMX Pentium, 178, 179
Large scale integration, 151 Modem, 250
Libraries, 134, 135 Monitor program, 138, 139
Linkers, 134, 135 MPC601, 185 192
Lisp, 145, 146 MPU, 5
Loaders, 134, 135 MSI, 151
Logic analyser, 260, 263
Logic gates see Gates
Logic probe, 257, 258 Nintendo Gamecube, 168, 169
Long word, 22 Noise, 8-14
LSI, 151 effect of, 14
partition, 13
thermal, 13
Machine code, 123 126 Non-destructive readout, 126 127
Mantissa, 45 Normalizing, 44
Maths co-processor, 148
Medium scale integration, 151
Megabyte, 23 Object code, 127
Memories, 72 83 Object-oriented programming, 142, 143
Memory maps, 81 83 Octal, 34, 35
Memory refresh, 115 Op code, 123
Micro, 5 Operand, 123
Microcomputer, 5 Optic fibre link, 251, 252
Microcontroller, 5 Oscillators, 217
Micro-OP, 181
Microprocessor system, 3
Microprocessor-based system, 5, 85 98 Parity, 236
Microprocessors: Partial decoding, 95 98
4004, 151, 159, 160 Pascal, 141, 142
6500, 164 Pentium 4, 179 182
6502, 162, 163 Pentium, 159, 173 182
6800, 160, 162, 163 Performance of microprocessors, increasing,
68000, 166 154 159
68000, 166, 167 Performance tests:
6801, 164 FLOPS, 153
8008, 160 benchmarks, 153, 154
8048, 164 GFLOPS see FLOPS
8080, 99 I/O operations, 154
8080A, 160, 162 SPECmark, 154
8085A, 161 TPS, 154
MMX Pentium, 178 PIC16F84A Option register, 214 216
Pentium 4, 179 182 PIC16F84A pinout, 220
277
Index
PIC16F84A register file map, 212 Sleep mode, 209, 210, 211
PIC16F84A special function register, SLSI, 151
213 216 Small scale integration, 151
PIC16F84A, 210 217 Sony Playstation 2, 169
Pipelining, 156, 157 Source code, 127
Playstation 2, 169 SPECmark, 154
Polling interrupts, 235 SRAM see Static RAM
Power PC 601, 185 192 SSI, 151
Power PC, 159, 184 192, 197 Stack pointer, 107, 108
PowerPC970, 189 192 Stack, 108
Prefetch buffer, 175 Startup, 116, 117
Program counter, 107 Startup address, 82
Programmable ROM, 77 79 Static electricity  precautions, 255
Programming a PICF84A, 222 231 Static RAM, 74, 75, 79, 80
Prolog, 147, 148 Status register, 103 106
PROM see Programmable ROM Super scale integration, 151
Syntax, 127
System, 1
Quadwords, 178
Quantization error, 242, 243
Terabyte, 23
Test equipment, 257 263
Radix, 45 TPS, 154
RAM cards, 81 Tri-state buffer, 59, 60, 65 66
RAM, 72 75 Truth table, 50
Ramp generators, 241, 242
Rapid Execution Engine, 182
Read/write, 65 UART, 165, 247, 248
Redundancy, 236 ULSI, 151
Register, 64 71 Ultra scale integration, 151
rotate, 70, 71 USART see UART
shift, 67 70
Remarks, 130
Reserved words, 129 Vectored interrupts, 235
RISC microcontroller, 206 210 Very scale integration, 151
RISC microprocessors, 158, 159 VLSI, 151
ROM, 76 80
Rotate registers, 70, 71
RS232C and RS423A, 248, 249 Wait states, 115
Watchdog timer, 206
Word, 22
Saturation arithmetic, 178, 179
Serial inputs and outputs, 115
Shift registers, 67 71 Z8, 164
Signed magnitude numbers, 39 Z80 see Microprocessors
Single precision, 47 Z80180 see Microprocessors
278


Wyszukiwarka

Podobne podstrony:
Matlab Introducing to Matlab and it s Graphics Capabilities
1 4 Introduction to SQL and database objects Lab
Kolb Introduction to Brain and Behavior 2e TOC
Introduction to Prana and Pranic Healing – Experience of Breath and Energy (Pran
Introduction to CPLD and FPGA Design
Introduction to Network Self defense technical and judicial issues
CSharp Introduction to C# Programming for the Microsoft NET Platform (Prerelease)
IMiR NM2 Introduction to MATLAB
How to Install And Run Windows XP From USB drive
Guide to Selection and Use of Disinfectants
Introduction to multivariate calibration in analytical chemistry
Smirnov, A V Introduction to tensor calculus (2004)
Aktywacja AC2012 How to install and activate the program
Introduction to Lean for Poland
Kydland, Prescott Time to Build and Aggregate Fluctuations

więcej podobnych podstron