original c68 retail diy auto diagnostic tool manual

Tool Information
Tool Information
Tool Information
Tool Information
Description:
Description:
Description: Auto Diagnostic Tool
Description:
Model:
Model:
Model: C68
Model:
Statement
Statement
Statement
Statement
This User Manual is for auto diagnostic tool C68. Without the prior written
permission of Carecar (Short for Shenzhen Carecar Technology Co.,
Ltd. ), any enterprise or person is NOT allowed to copy or store any data
(electronic, mechanic, photo copying, recording, etc). The information
contained herein is only used for Carecar C68. Carecar is not responsible
for any damage by wrong usage as stated below.
Carecar shall not be liable for any part that has been abused, altered, used
for a purpose other than for which it was intended, or used in a manner
inconsistent with instructions regarding use. Other product names
mentioned herein are for explaining how to use this device; the copyrights
belong to the corresponding original enterprise.
TradeMark
TradeMark
TradeMark
TradeMark
Shenzhen Carecar Technology Co., Ltd. registered the trademark of
Carecar in China and other countries. In any countries where Carecar
trademarks, service marks, logos and company name is not registered,
Carecar claims other right associated with unregistered trademarks, service
marks, logos and company name. Without prior written permission,
anyone is NOT allowed to use trademark, service mark, logo or company
name of Carecar.
Safety Precautions
Safety Precautions
Safety Precautions
Safety Precautions
To avoid personal injury, instrument damage and/or damage to your
vehicle, please do not use this tool before reading this manual.
The safety messages cover situations Carecar is aware of. Carecar
cannot evaluate or advise you all the possible hazards. You must be
certain that any conditions or service procedures encountered do not
jeopardize your personal safety. Always read your vehicle's service
manual and follow its safety precautions before and during any test or
service procedure. ALWAYS observe the following general safety
precautions:
ż� Always perform automotive testing in a safe environment.
ż� When an engine is running, it produces carbon monoxide, a toxic
and poisonous gas. To prevent serious injury or death from carbon
monoxide poisoning, operate the vehicle ONLY in a well-
ventilated area.
ż� To protect your eyes from propelled objects as well as hot or
caustic liquids, always wear eye protection that meets ANSI
standards.
ż� When an engine is running, many parts (such as the coolant fan,
pulleys, fan belt, etc.) turn at high speed. To avoid serious injury,
always be aware of moving parts. Keep a safe distance from these
parts as well as other potentially moving objects.
ż� Engine parts become very hot when the engine is running. To
prevent severe burns, avoid contact with hot engine parts.
ż� Before starting an engine for testing or troubleshooting, make sure
the parking brake is engaged. Put the transmission in park (for
automatic transmission) or neutral (for manual transmission).
Block the drive wheels with suitable blocks.
ż� Connecting or disconnecting test equipment when the ignition is
ON can damage test equipment and the vehicle's electronic
components. Turn the ignition OFF before connecting the Scan
Tool to or disconnecting the Scan Tool from the vehicle s Data
Link Connector (DLC).
ż� To prevent damage to the on-board computer when taking vehicle
electrical measurements, always use a digital multimeter with at
least 10 megohms of impedance. Fuel and battery vapors are
highly flammable.
ż� To prevent an explosion, keep all sparks, heated items and open
flames away from the battery and fuel / fuel vapors. DO NOT
SMOKE NEAR THE VEHICLE DURING TESTING.
ż� Don't wear loose clothing or jewelry when working on an engine.
Loose clothing can become caught in the fan, pulleys, belts, etc.
Jewelry is highly conductive, and can cause a severe burn if it
makes contact between a power source and ground.
ż� Use extreme caution when working around the ignition coil,
distributor cap, ignition wires and spark plugs. These components
create hazards voltages when the engine is running.
ż� Keep a fire extinguisher suitable for gasoline/chemical/electrical
fires nearby
ż� Keep the scan tool dry, clean, free from oil/water or grease. Use a
mild detergent on a clean cloth to clean the outside of the scan
tool, when necessary.
.
.
ż� Do not drive the vehicle and operate the scan tool at the same time.
.
Any distractions may cause an accident.
ż� To avoid damaging the scan tool or generating false data, make
sure the vehicle battery is fully charged and the connection to the
vehicle DLC is clean and secure.
ż� Do not place the scan tool on the distributor of a vehicle. Strong
electro-magnetic interference can damage the scan tool.
Contents
Contents
Contents
Contents
1. Introduction��1
1. Introduction��1
1. Introduction��1
1. Introduction��1
1.1 Brief Introduction�� 1
1.1 Brief Introduction�� 1
1.1 Brief Introduction�� 1
1.1 Brief Introduction�� 1
1.2 Tool Description��2
1.2 Tool Description��2
1.2 Tool Description��2
1.2 Tool Description�� 2
1.3 Accessory Description �� 3
1.3 Accessory Description �� 3
1.3 Accessory Description �� 3
1.3 Accessory Description ��3
1.4 Technical Parameters ��4
1.4 Technical Parameters ��4
1.4 Technical Parameters ��4
1.4 Technical Parameters ��4
2. Use the Tool ��5
2. Use the Tool ��5
2. Use the Tool ��5
2. Use the Tool ��5
2.1 Power On ��5
2.1 Power On ��5
2.1 Power On ��5
2.1 Power On ��5
2.2 Screen Calibration �� 6
2.2 Screen Calibration �� 6
2.2 Screen Calibration �� 6
2.2 Screen Calibration ��6
2.3 Power Off ��7
2.3 Power Off ��7
2.3 Power Off ��7
2.3 Power Off ��7
2.4 Standby �� 7
2.4 Standby �� 7
2.4 Standby �� 7
2.4 Standby �� 7
2.5 Function Button Description of Diagnostic Interface ��7
2.5 Function Button Description of Diagnostic Interface ��7
2.5 Function Button Description of Diagnostic Interface ��7
2.5 Function Button Description of Diagnostic Interface ��7
2.6 Enter Three Modes by Pressing Shortcut Key ��8
2.6 Enter Three Modes by Pressing Shortcut Key ��8
2.6 Enter Three Modes by Pressing Shortcut Key ��8
2.6 Enter Three Modes by Pressing Shortcut Key ��8
2.7 Check Screenshots �� 8
2.7 Check Screenshots �� 8
2.7 Check Screenshots �� 8
2.7 Check Screenshots �� 8
3. Diagnostic Instruction ��8
3. Diagnostic Instruction ��8
3. Diagnostic Instruction ��8
3. Diagnostic Instruction ��8
3.1 Set-up and Connection ��8
3.1 Set-up and Connection ��8
3.1 Set-up and Connection ��8
3.1 Set-up and Connection ��8
3.1.1 Set-up �� 8
3.1.1 Set-up �� 8
3.1.1 Set-up �� 8
3.1.1 Set-up ��8
3.1.2 Connect C68 with vehicle ��9
3.1.2 Connect C68 with vehicle ��9
3.1.2 Connect C68 with vehicle ��9
3.1.2 Connect C68 with vehicle ��9
3.2 Diagnostic Procedure ��10
3.2 Diagnostic Procedure ��10
3.2 Diagnostic Procedure ��10
3.2 Diagnostic Procedure ��10
3.2.1 Select available vehicle makes ��10
3.2.1 Select available vehicle makes ��10
3.2.1 Select available vehicle makes ��10
3.2.1 Select available vehicle makes ��10
3.2.2 Enter diagnostic system �� 10
3.2.2 Enter diagnostic system �� 10
3.2.2 Enter diagnostic system �� 10
3.2.2 Enter diagnostic system �� 10
3.2.3 Diagnostic function menu �� 12
3.2.3 Diagnostic function menu �� 12
3.2.3 Diagnostic function menu �� 12
3.2.3 Diagnostic function menu �� 12
3.2.4 Read Datastream ��13
3.2.4 Read Datastream ��13
3.2.4 Read Datastream ��13
3.2.4 Read Datastream ��13
3.3 C68 Function Description ��14
3.3 C68 Function Description ��14
3.3 C68 Function Description ��14
3.3 C68 Function Description ��14
4. Updating the C68�� 15
4. Updating the C68�� 15
4. Updating the C68�� 15
4. Updating the C68�� 15
4.1 Registration �� 15
4.1 Registration �� 15
4.1 Registration �� 15
4.1 Registration ��15
4.1.1 Distributor registration ��15
4.1.1 Distributor registration ��15
4.1.1 Distributor registration ��15
4.1.1 Distributor registration ��15
4.1.2 Product user registration ��17
4.1.2 Product user registration ��17
4.1.2 Product user registration ��17
4.1.2 Product user registration ��17
4.2 Upgrade ��19
4.2 Upgrade ��19
4.2 Upgrade ��19
4.2 Upgrade ��19
4.2.1 Upgrade preparation ��19
4.2.1 Upgrade preparation ��19
4.2.1 Upgrade preparation ��19
4.2.1 Upgrade preparation ��19
4.2.2 Download software �� 19
4.2.2 Download software �� 19
4.2.2 Download software �� 19
4.2.2 Download software �� 19
4.2.3 Upgrade the tool�� 20
4.2.3 Upgrade the tool�� 20
4.2.3 Upgrade the tool�� 20
4.2.3 Upgrade the tool��20
4.2.4 Upgrade update show ��25
4.2.4 Upgrade update show ��25
4.2.4 Upgrade update show ��25
4.2.4 Upgrade update show ��25
4.3 Member Center Information �� 26
4.3 Member Center Information �� 26
4.3 Member Center Information �� 26
4.3 Member Center Information �� 26
4.3.1 Member information �� 26
4.3.1 Member information �� 26
4.3.1 Member information �� 26
4.3.1 Member information ��26
4.3.2 Change password �� 26
4.3.2 Change password �� 26
4.3.2 Change password �� 26
4.3.2 Change password ��26
4.3.3 Add serial number �� 26
4.3.3 Add serial number �� 26
4.3.3 Add serial number �� 26
4.3.3 Add serial number �� 26
4.3.4 Customer service ��27
4.3.4 Customer service ��27
4.3.4 Customer service ��27
4.3.4 Customer service ��27
4.3.5 Software download �� 27
4.3.5 Software download �� 27
4.3.5 Software download �� 27
4.3.5 Software download �� 27
5. Registration and Upgrade FAQ��27
5. Registration and Upgrade FAQ��27
5. Registration and Upgrade FAQ��27
5. Registration and Upgrade FAQ��27
5.1 Registration FAQ ��27
5.1 Registration FAQ ��27
5.1 Registration FAQ ��27
5.1 Registration FAQ ��27
5.2 Upgrade FAQ ��28
5.2 Upgrade FAQ ��28
5.2 Upgrade FAQ ��28
5.2 Upgrade FAQ ��28
6. Maintenance, Warranty and Service��29
6. Maintenance, Warranty and Service��29
6. Maintenance, Warranty and Service��29
6. Maintenance, Warranty and Service��29
6.1 Maintenance �� 29
6.1 Maintenance �� 29
6.1 Maintenance �� 29
6.1 Maintenance ��29
6.1.1 Cleaning and protect the touch screen �� 29
6.1.1 Cleaning and protect the touch screen �� 29
6.1.1 Cleaning and protect the touch screen �� 29
6.1.1 Cleaning and protect the touch screen �� 29
6.1.2 Clean and inspect the unit �� 29
6.1.2 Clean and inspect the unit �� 29
6.1.2 Clean and inspect the unit �� 29
6.1.2 Clean and inspect the unit �� 29
6.1.3 Quick troubleshooting tips �� 29
6.1.3 Quick troubleshooting tips �� 29
6.1.3 Quick troubleshooting tips �� 29
6.1.3 Quick troubleshooting tips �� 29
6.2 Warranty �� 29
6.2 Warranty �� 29
6.2 Warranty �� 29
6.2 Warranty ��29
6.3 Service ��30
6.3 Service ��30
6.3 Service ��30
6.3 Service ��30
1. Introduction
1. Introduction
1. Introduction
1. Introduction
1.1 Brief Introduction
1.1 Brief Introduction
1.1 Brief Introduction
1.1 Brief Introduction
C68 is an ultimate professional auto diagnostic tool that can check all
systems of all major European, American and Asian vehicles. With more
than 50 vehicle makes and hundreds of vehicle electronic systems make it
globally adaptive and practical in use, and multifunction performs
outstanding diagnostic performance. It provides an ever fast and stable
diagnostic speed with its new and unique platform. The new technologies
of which its compatibility with different platforms and strengthened
firmware and software that advances the diagnostic functions, speed up the
diagnostic processes and extend the capability in firmware and software. It
integrates the needs from DIY market to professional technicians criteria.
A more convenient and trouble-free diagnostic experience is provided at
any time by your side as to its compact and durable housing. This unique
solution keeps it up-to-date to meet the market needs and development
trends. Easy operation on diagnosis symptoms and codes, the creative
screenshots capturing in real time function offer an efficient repairing
service for individuals or workshops. External SD card with large capacity
stores the screenshots captured in real time.
Advantages
Advantages
Advantages
Advantages
ż� Multilanguage supported which allows it to be used in different
countries and areas.
ż� Mechanical but compact design with rubber and screen protector
housing, high-resolution and sensitivity colorful touch screen
combined with advanced diagnostic multifunction make it more
convenient, efficient, practical and accurate for diagnosis.
ż� Unique platform provides high speed and stable of diagnosis
Durability
Durability
Durability
Durability
ż� The integrative structural design is anti-falls, anti-seismic and durable.
ż� The industrialization design ensures that the product works stably even
under adverse environments such as high-temperature, low-
temperature, etc.
ż� High-voltage class protection design which supports vehicles with 12V
and 28V.
1
1.2 Tool Description
1.2 Tool Description
1.2 Tool Description
1.2 Tool Description
Figure1.1 C68 Top view
Figure1.2 C68 Front view
Figure1.3 C68 Bottom view
2
NO. Name Description
NO. Name Description
NO. Name Description
NO. Name Description
Indicate operation buttons, testing information
1 Touch Screen
and help information
To protect C68 from vibration, dropping and dirt
2 Protective Case
Power Light To indicate tool s operation status
3
To connect main cable
4 Diagnostic Port
Touch screen calibration
5 Shortcut Key
Selecting items and enters information
6 Stylus
while operating the C68
To connect the computer for update
7 Micro USB Port
To insert the SD card
8 SD Card Slot
1.3 Accessory Description
1.3 Accessory Description
1.3 Accessory Description
1.3 Accessory Description
NO. Name Description Picture
NO. Name Description Picture
NO. Name Description Picture
NO. Name Description Picture
To connect C68
1
C68 Main Cable with OBDII
connector
OBDII diagnostic
2
C68 Connector
connector
To store C68 vehicle
3
SD Card diagnostic softwares
and screenshots
3
To connect 68 with
4
USB Cable
PC
To click operation
5
Stylus
on C68
To protect C68
6
Screen Protector
touch screen
Remark: Instruction for using the screen protector
Remark: Instruction for using the screen protector
Remark: Instruction for using the screen protector
Remark: Instruction for using the screen protector
1.4 Technical Parameters
1.4 Technical Parameters
1.4 Technical Parameters
1.4 Technical Parameters
ż� Main Unit Size: 5.91''x 3.54''x 1.12''
ż� CPU: Industrial Class ARM32
ż� Memory: 64M
4
ż� SD card: Support mass external storage card
ż� Interface: USB 2.0
ż� Voltage: DC9V/DC28V
ż� Display Screen: 4.3 inch LCD touch screen (480*270) TFT
2. Use the Tool
2. Use the Tool
2. Use the Tool
2. Use the Tool
2.1 Power On
2.1 Power On
2.1 Power On
2.1 Power On
It is powered automatically to connect with vehicle DLC by main cable,
or connect with PC by USB cable, screen will display initializing
interface as shown in picture 0.1 below. Use the stylus to click anywhere
of the screen, system will enter into diagnostic interface as shown in
picture 0.2 below:
Picture 0.1 Picture 0.2
5
2.2 Screen Calibration
2.2 Screen Calibration
2.2 Screen Calibration
2.2 Screen Calibration
After enter into initializing interface, press [Shortcut Key] twice, system
will change to screen calibration interface as shown in picture 0.3 below.
According to tips on the screen, enter into the interfaces as picture 0.4, 0.5,
0.6 shown below to finish screen calibration, after finish it, according to
tips shown as picture 0.6, click screen to exit screen calibration.
Picture 0.3 Picture 0.4
Picture 0.5 Picture 0.6
6
2.3 Switch off
2.3 Switch off
2.3 Switch off
2.3 Switch off
Disconnect C68 with DLC or USB if you want to turn off after using it.
2.4 Standby
2.4 Standby
2.4 Standby
2.4 Standby
Under C68 is in On status, press [Shortcut Key] to turn off screen
display, then C68 will be in standby mode. Press [Shortcut Key] again if
you want to stop standby mode and turn on the screen display.
2.5 Function Button Description of Diagnostic Interface
2.5 Function Button Description of Diagnostic Interface
2.5 Function Button Description of Diagnostic Interface
2.5 Function Button Description of Diagnostic Interface
UP: Display last page of menu, if there is only one page or the current
page is the last page, the button will be inactive and turn to grey.
DOWN: Display next page of menu, if there is only one page or the
current page is the last page, the button will be inactive and turn to grey.
HISTORY: Record last diagnostic procedure.
SETTING: Set language, time and contrast. Click [Setting] button, enter
system setting interface as shown in picture 0.7
1 to
1
1 Language setting: click
1 �
select desired language, language
can be set after re-start the tool.
2
2
2 Time setting: set system time
2 �
according to current time when in
use.
3
3
3 Contrast setting: pull the scroll bar
3 �
to adjust display s brightness.
4
4
4 Tool serial number: serial number is
4 �
produced from production date,
which will be used for after service
(registration for download or
change configurations)
Click [OK] to exit after setting the
language, time and contrast.
Picture 0.7
7
2.6 Enter Three Modes by Pressing Shortcut Key
2.6 Enter Three Modes by Pressing Shortcut Key
2.6 Enter Three Modes by Pressing Shortcut Key
2.6 Enter Three Modes by Pressing Shortcut Key
Calibration mode:
Calibration mode:
1) Calibration mode: Power up C68 to enter starting interface, double
Calibration mode:
press shortcut key, then it will turn to calibration interface, details about
2.2 Screen Calibration
2.2 Screen Calibration
screen calibration, please refer to [2.2 Screen Calibration
2.2 Screen Calibration].
Update starting mode:
Update starting mode:
2) Update starting mode: After copy the display program or vehicle
Update starting mode:
software to [UPDATA] folder, power up the tool, if it appears problem
during updating, press the shortcut key and connect tool with PC by
USB cable at the same time, this is to avoid power up problem and be
5.2 Upgrade FAQ
5.2 Upgrade FAQ
able to restart the tool, details please refer to [5.2 Upgrade FAQ
5.2 Upgrade FAQ]
SD card mode:
SD card mode:
3) SD card mode: Power up C68 by USB cable, DO NOT press shortcut
SD card mode:
key and wait few seconds, it will enter into SD card mode, then you can
check system files and screenshots, detailed operation please refer to
2.7 Check Screenshots
2.7 Check Screenshots
below instruction [2.7 Check Screenshots
2.7 Check Screenshots]
2.7 Check Screenshots
2.7 Check Screenshots
2.7 Check Screenshots
2.7 Check Screenshots
A. Check screenshots by SD card
A. Check screenshots by SD card
A. Check screenshots by SD card
A. Check screenshots by SD card
1) Connect SD card with PC by using a SD card converter or plug
the SD card to SD card slot if your PC has a SD card slot.
2) Find the folder [bmp] in removable disk, click to enter and
check the screenshots.
B. Check screenshots by USB cable
B. Check screenshots by USB cable
B. Check screenshots by USB cable
B. Check screenshots by USB cable
1) Connect the tool with PC by USB cable.
2) Find the folder [bmp] in removable disk, click to enter and
check the screenshots.
3. Diagnostic Instruction
3. Diagnostic Instruction
3. Diagnostic Instruction
3. Diagnostic Instruction
3.1 Set-up and Connection
3.1 Set-up and Connection
3.1 Set-up and Connection
3.1 Set-up and Connection
3.1.1 Set-up
3.1.1 Set-up
3.1.1 Set-up
3.1.1 Set-up
General test conditions
General test conditions
General test conditions
General test conditions
1 �Turn on vehicle power switch
2 �Battery voltage of the vehicle should be within 11V-14V, C68
working voltage range is 9V-36V
3 �Throttle should be Off
8
4 �Ignition timing and idle speed should be within specification range,
water and transmission oil temperature is in normal working range
(water temperature is 90 105�C and transmission oil temperature is
50 80�C).
Connector selection
Connector selection
Connector selection
Connector selection
There are various connectors provided with the main unit. Every
connector has an application, please check the connector application
carefully and select the correct connector for the vehicle being diagnosed.
Find Location of the Data Link Connector
Find Location of the Data Link Connector
Find Location of the Data Link Connector
Find Location of the Data Link Connector
The location of the data link connector is usually in the left side under the
dash, behind covers on center of dash or center console, but there are 8
common locations as shown below.
3.1.2 Connect C68 with Vehicle
3.1.2 Connect C68 with Vehicle
3.1.2 Connect C68 with Vehicle
3.1.2 Connect C68 with Vehicle
Please refer to below figures to learn how to connect to get power.
Please refer to below figures to learn how to connect to get power.
Please refer to below figures to learn how to connect to get power.
Please refer to below figures to learn how to connect to get power.
1) Check DLC location and shape
2) Select correspondent connector according to vehicle brand and
model
3) Connect the correspondent connector with one terminal of main
cable and plug this terminal in DLC
4) Connect main unit with another terminal of main cable
9
3.2 Diagnostic Procedure
3.2 Diagnostic Procedure
3.2 Diagnostic Procedure
3.2 Diagnostic Procedure
3.2.1. Select available vehicle makes
3.2.1. Select available vehicle makes
3.2.1. Select available vehicle makes
3.2.1. Select available vehicle makes
C68 can diagnose various makes of vehicles. Carecar keeps updating to
enhance the software. Please visit the Carecar website
http://www.carecartech.com to download the latest released software.
The vehicle brands are showing as icons. Click on the corresponding vehicle
icon to load the diagnostics software and start diagnosis. It s very useful and
fast to enter into the vehicle diagnostic system if you are familiar with the
vehicle icons.
There are different software packages for different user needs according to
regions and vehicle makes. For the software in your unit, please refer to the
packing list or contact the local distributor.
3.2.2. Enter diagnostic system
3.2.2. Enter diagnostic system
3.2.2. Enter diagnostic system
3.2.2. Enter diagnostic system
After connect the C68 with vehicle by the main cable, C68 will turn on
automatically and enter to initialize interface as shown in picture 0.1�Page
5 �, click anywhere of the screen at initialize interface to enter diagnostic
10
interface.
After enter diagnostic interface, find correspondent vehicle icon by click [UP]
[DOWN] buttons. There are three ways to enter vehicle diagnosis:
1 � Click correspondent vehicle icon, and click [ENTER] to start
diagnosis.
2 � Quick double click correspondent vehicle icon, system will start
diagnosis
3 � Click [History] at diagnostic interface, system will enter into last
diagnostic record ( only apply to the same vehicle that diagnosed
last time)
Here take OBDII as an example to show how to diagnose the car. Click
OBDII as shown in picture 0.2. Then click [ENTER] to enter the
software version selection interface of vehicle diagnosis as shown in
picture 0.8. Select desired version( There is only one version V12.00 as
shown in picture 0.8 below, normally it s requested to choose the latest
version, each last version is compatible with older versions). Click
[ENTER] to start OBDII diagnosis.
Remark:
In picture 0.8: [HELP] button helps
user to know the tool functions,
update information and operations,
details please refer to [HELP]
function of C68. [UP] [DOWN]
ENTER] [BACK] button functions,
please refer to page 7.
Picture 0.8
11
After enter OBDII diagnostic system, click [Generic OBDII & EOBD] as
shown in picture 0.9, then system will enter into [Select diagnostic function]
interface as shown in picture 1.0 next page:
In picture 0.9:
[RESET] BUTTON�It helps to re-
enter diagnostic system (to set the
diagnostic system that is under
processing re-enter the diagnostic
system).
[CAPTURE] BUTTON: To capture
the screen interface in real time,
captured screenshots will be saved
in SD card.
Picture 0.9
3.2.3. Diagnostic function menu
3.2.3. Diagnostic function menu
3.2.3. Diagnostic function menu
3.2.3. Diagnostic function menu
1 � In diagnostic function menu,
select and click [Read trouble
code] to execute this function,
result will be shown in few
seconds.
If it shows no trouble code, that
means there is no trouble of the
car system.
2 � Click [Clear trouble code] to
clear the trouble codes that has
read. A message will tell you
Trouble code is successfully
cleared after you successfully Picture 1.0
12
cleared the code. If a message indicate No trouble code that
means the trouble code is cleared in all systems, or the system you
diagnose has no trouble code.
3 � Click [Current powertrain diagnostic data], system will show
current DataStream of powertrain as shown in picture 1.1. Click
needed DataStream s and click [ENTER] to enter [DataStream]
menu.
Remark�Different vehicle system has different data selections in
[Select Diag. Functions], details refer to C68 operation.
Picture 1.1 Picture1.2
3.2.4. Read Datastream
3.2.4. Read Datastream
3.2.4. Read Datastream
3.2.4. Read Datastream
Live data can be read under [DataStream] menu as shown in picture 1.3,
[Capture] function can capture screenshots with live data in real time, or click
[Back] to exit, or click [Reset] to re-enter the diagnostic system again if needed.
13
Click [GRAPH] button as shown in picture 1.2, system will display graphic
view of DataStream as shown in picture 1.3. Click [EXIT] button to get back.
Picture 1.3
3.3 C68 Function Description
3.3 C68 Function Description
3.3 C68 Function Description
3.3 C68 Function Description
1. Communication test of CAN-BUS and K communication cable
Support following protocols:
1 � PWM
2 � VPW
3 � KWP2000
4 � ISO9141
5 � CAN-BUS
2� Basic Function:
1 �Read ECU information
2 �Read trouble code
3 �Clear trouble code
4 �Read DataStream
5 �Component test
14
6 �Basic setting
7 �Programming
8 �Reset service lights
3� Special Function:
1 �Read password ( VW)
2 �Reset airbag (VW, Geely etc)
3 �Reset throttle�BMW, Toyota, Honda etc �
4 �Immobilizer�BENZ, Greatwall, Brilliance, Roewe, MG
etc �
4. Upgrade the C68
4. Upgrade the C68
4. Upgrade the C68
4. Upgrade the C68
4.1 Registration
4.1 Registration
4.1 Registration
4.1 Registration
4.1.1 Distributor registration
4.1.1 Distributor registration
4.1.1 Distributor registration
4.1.1 Distributor registration
Note:
Note:
Note: Distributor registration is applied to distributor only.
Note:
Distributor shall get a dealer code and a password from us before register
on our website at the first time to purchase our tool.
Step 1: Browse our website www.carecartech.com and you will see
register section as shown in below picture:
15
Click [Register] to continue registration as display below:
Create your own user name and password when you register which will be
used for entering distributor center.
Please note to select [Distributor] for distributor registration, click
[Confirm] after you fill the information, then it will pop a message as
shown below:
Please check email and you will get a link to verify your registration
information as below:
16
with product serial number, password and dealer code that are given by us,
Click the link as instructed in the email, you will enter into distributor
center as shown below:
Distributor registration is done. Login with [Username] and [Password]
you created when you register as distributor to enter [Distributor Center].
In this center, you can manage the tool that has registered under your
dealer code.
4.1.2 Product user registration
4.1.2 Product user registration
4.1.2 Product user registration
4.1.2 Product user registration
Note:
Note:
Note: Product user registration is applied to distributor or end user who
Note:
has a tool in hand that need to update it.
Product user shall get a dealer code from distributor before register on our
website. Product serial number and password will be provided by us.
Step 1: Browse our website www.carecartech.com and you will see
register section and click [Register] to continue registration as display
below:
17
Create your own user name and password when you register which will be
used for entering product users page to download softwares.
Please note to select [Product user] for end user registration, click
[Confirm] after you fill the information, then it will pop a message to
inform registration is successful.
Login with [Username] and [Password] you created when you register as
product user to enter [Member Center] and download software.
18
4.2 Upgrade
4.2 Upgrade
4.2 Upgrade
4.2 Upgrade
4.2.1 Upgrade Preparation
4.2.1 Upgrade Preparation
4.2.1 Upgrade Preparation
4.2.1 Upgrade Preparation
Please prepare:
1. C68 main unit 2. USB cable
3. C68 User Manual 4. SD converter (self provided)
5. PC (keep PC connected with internet, close or stop other programs)
Here take tool serial numbered 680130000008 and PC with Windows
XP for example:
4.2.2 Download software
4.2.2 Download software
4.2.2 Download software
4.2.2 Download software
Step 1. Login
Step 1. Login
Step 1. Login
Step 1. Login
Browse Carecar website: http://www.carecartech.com at home page,
find Login function frame at down-right, input the user name and
Product user
Product user
password you used to register as [Product user please choose default
Product user],
[Product user], click [Login] as shown following:
Step 2. Select and download desired vehicle software
Step 2. Select and download desired vehicle software
Step 2. Select and download desired vehicle software
Step 2. Select and download desired vehicle software
After login, it will enter into member s page and shown as follow:
19
Before vehicle icons, there is a function frame for you to select
multiple vehicle softwares and click [Download] to download selected
softwares at one time.
Or you can click [Show All] to view and select all the softwares without
change page to download at one time.
4.2.3 Upgrade the tool
4.2.3 Upgrade the tool
4.2.3 Upgrade the tool
4.2.3 Upgrade the tool
Note:
Note:
Note: Must download the [Update tool] from our website.
Note:
Step 1.
Step 1.
Step 1. Find the compressed file [680130000008] which you downloaded the
Step 1.
softwares from Carecar website, uncompress it.
20
Step 2.
Step 2.
Step 2. Find [Update tool] file, open the file as shown below:
Step 2.
After you open it, it has two files, open the [driver] file as shown below:
21
After open the driver, update tool will be popped up as shown below:
Step 3. Preparation for two upgrade ways:
Step 3. Preparation for two upgrade ways:
Step 3. Preparation for two upgrade ways:
Step 3. Preparation for two upgrade ways:
A. Upgrade to SD card
A. Upgrade to SD card
A. Upgrade to SD card
A. Upgrade to SD card
1) Get the C68 main unit, pull away rubber cover of SD card slot down at the
end side of C68, you will see a SD card inside.
2) Pull out SD card by pressing it slightly, plug it into a SD converter (please
note to plug in right side).
3) Plug the converter into PC USB interface
4) It pops out [Install new hardware] message down at right corner of PC,
wait until it pops [Install new hardware is successful] (Note: some
computer just read the card without notice message like this)
Step 4.
Step 4.
Further steps, please follow instruction from [Step 4.] in page 23.
Step 4.
22
B. Upgrade to tool by USB cable:
B. Upgrade to tool by USB cable:
B. Upgrade to tool by USB cable:
B. Upgrade to tool by USB cable:
1) Prepare C68 main unit and USB cable, connect the tool with PC by the
USB cable.
2) It pops out [Install new hardware] message down at right corner of PC,
wait until it pops [Install new hardware is successful] (Note: some
computer just read the card without notice message like this)
3) Double click [My computer], [Removable Disk] will be indicated to tell
you that you have connect the tool with computer successfully. Further
Step 4.
Step 4.
steps, please see following instructions from [Step 4.].
Step 4.
Step 4.
Step 4.
Step 4. Click button [Browse] and find the folder that you uncompressed in
Step 4.
your PC, update tool will be shown as below:
23
Step 5.
Step 5.
Step 5. Click [Update] to start upgrade, then it will be processing as shown
Step 5.
below:
Upgrade finish when it pops a message as shown below:
If upgrade to SD card, after finish above upgrade procedures, please
If upgrade to SD card, after finish above upgrade procedures, please
If upgrade to SD card, after finish above upgrade procedures, please
If upgrade to SD card, after finish above upgrade procedures, please
operate as follow:
operate as follow:
operate as follow:
operate as follow:
1) After upgrade the vehicle software to SD card, disconnect it with PC and
pull out it from SD card converter or SD card slot. Install it back to the
scan tool and pull back the rubber cover.
24
2) Power up the tool by USB cable to connect it with PC, press shortcut key
in 5 seconds, the screen will enter to start display automatically. Upgrade
finish!
Note:
Note:
Note: if you have upgraded update show together with vehicle software, use
Note:
a USB cable to connect the tool with PC, when the C68 is powered up,
press the shortcut key in 5 seconds, the tool screen will pop a message to
tell you that the tool will proceed upgrade, press [OK] to start the
upgrade, the light will turn to red and in quick blink till turn to yellow
and enter to start display. Upgrade finish!
Caution:
Caution:
Caution: During this step, do not cut off the power!
Caution:
If upgrade to tool by using USB cable, please operate as follow:
If upgrade to tool by using USB cable, please operate as follow:
If upgrade to tool by using USB cable, please operate as follow:
If upgrade to tool by using USB cable, please operate as follow:
1) Disconnect tool with PC and connect again by a USB cable.
If upgrade
If upgrade
The following operations will be the same as previous instructions [If upgrade
If upgrade
to SD card point 2)
to SD card point 2)
to SD card from [point 2)].
to SD card& ] point 2)
4.2.4 Upgrade Update Show
4.2.4 Upgrade Update Show
4.2.4 Upgrade Update Show
4.2.4 Upgrade Update Show
If you want to upgrade [Update show], you must download and upgrade at
least a vehicle software together with [Update show], so that it will be
upgradable, otherwise it won t be detected by the update tool if you upgrade
the [Update show] individually.
25
4.3 Member Center Guidance
4.3 Member Center Guidance
4.3 Member Center Guidance
4.3 Member Center Guidance
Enter to [Member Center], there is a row of function menu as shown below:
4.3.1 Member information
4.3.1 Member information
4.3.1 Member information
4.3.1 Member information
1) If you want to check and modify the registration information, please
click [Member information]
2) You can modify any information indicated there except User Name,
please click [Confirm] after modification, the information will be
saved successfully.
4.3.2 Change password
4.3.2 Change password
4.3.2 Change password
4.3.2 Change password
1) If you need change password, please click [Change password], fill in
[Original password] and [New password] accordingly, click [Confirm]
to save.
2) Please use new password when you login next time.
4.3.3 Add serial number
4.3.3 Add serial number
4.3.3 Add serial number
4.3.3 Add serial number
1) If you own several Carecar tools, you don t need to register twice,
please click [Add serial number] and fill in the tool s serial number,
26
product password and dealer code accordingly, click [Confirm] to add
successfully with a message notice.
2) After you add multi-serial numbers under one user, please note to
select correspondent serial number of the tool to download software ,
or you will not be able to update the tool
4.3.4 Customer service
4.3.4 Customer service
4.3.4 Customer service
4.3.4 Customer service
If you want to know more about Carecar products or have any
feedback, please click [Customer service] to enter [Customer feedback]
interface, please fill in the information accordingly and click [Confirm]
to send the mail, we will reply to your email as soon as possible.
4.3.5 Software download
4.3.5 Software download
4.3.5 Software download
4.3.5 Software download
1) If you want to update and check software information, please click
[Software download], you will see software version, date and updating
4.2
4.2
information etc. About download and upgrade please refer to [4.2
4.2
Upgrade
Upgrade
Upgrade
Upgrade]
2) User with multi-serial numbers to be notified, select correspondent
serial number where indicate serial number at up-left of where all the
software displayed, then download the software.
5 Registration and Upgrade FAQ
5 Registration and Upgrade FAQ
5 Registration and Upgrade FAQ
5 Registration and Upgrade FAQ
5.1 Registration FAQ
5.1 Registration FAQ
5.1 Registration FAQ
5.1 Registration FAQ
Q:
Q:
1) Q: How to do when End user or Distributor forget login password?
Q:
A:
A:
A: Browse http://www.carecartech.com, find [Member Login] section,
A:
click [Forgot Password], fill in user name and email address that you
used for registration, select user type and click [Confirm], it will pop a
message to tell you that a mail has been sent to your email address.
Please check your email box if you receive a mail titled [Forgot
Password], you will get a initial password [123456]. If you want to
change the initial password, please go to member center to change it.
Note:
Note:
Note: if you can t receive the email, check your junk mail box.
Note:
Q:
Q:
2) Q: How to do when I don t receive the mail after I tried finding back
Q:
password through Carecar website?
A:
A:
A: a. please refresh your mail box
A:
b. please check if it s in your junk mail box
c. If you don t receive it, please try again
Q:
Q:
3) Q: How to exit member center?
Q:
27
A:
A:
A: Find and click [Exit] at the first line of member center, or get back to
A:
home page, find [Member Login] section, click [Exit].
5.2 Upgrade FAQ
5.2 Upgrade FAQ
5.2 Upgrade FAQ
5.2 Upgrade FAQ
Q:
Q:
1 �Q: How to do if update tool cannot read serial number and select software
Q:
when I use a USB cable to upgrade under [Removable disk] readable
condition?
A:
A:
A: Turn on C68, click [Setting], down there is tool serial number, check if
A:
the serial number is the same as the one of the downloaded software.
Q:
Q:
2) Q: How to do when popping [Cannot read serial number] while I am
Q:
clicking [Browse] to select software folders in update tool during
upgrade by a USB cable?
A:
A:
A: Please double click [My computer], if computer can t read
A:
[Removable Disk], it means that you computer can t read the device,
please save needed files and pull out the USB cable, restart the
computer and connect again by USB cable.
Q:
Q:
3) Q: How to do if I pull out USB cable during upgrade?
Q:
A:
A:
A: Reconnect the tool with computer by USB cable, click [Update] in
A:
C68 update tool to re-upgrade.
Q:
Q:
4) Q: After finishing software update, it needs to be restarted to update to
Q:
the tool, how to do if connection being cut off while C68 is updating?
A:
A:
A: If this happens, the tool cannot start up, you will need to contact
A:
manufacture or distributor, a [c68loade] file will be provided by
manufacturer, after receive the file, the operation will be as follow:
1) Connect tool with PC by a USB cable and press the shortcut key at the
same time, C68 will be powered up and the light at up-right corner
will be red and in quick blink, when you see this, please stop pressing
shortcut key
2) Open [My computer], you will see a removable disk named [CARE
ENABLE], double click to enter the disk, you will see a file named
[c68loade].
3) Copy the [c68loade] that provided by manufacture to overwrite the
previous one.
4) After overwrite the file, close the removable disk and disconnect tool
with PC.
5) Connect tool with PC again (Note: do not press shortcut key this time),
wait for few seconds, tool will be powered up and enter to start display
automatically.
28
6 Maintenance, Warranty and Service
6 Maintenance, Warranty and Service
6 Maintenance, Warranty and Service
6 Maintenance, Warranty and Service
6.1 Maintenance
6.1 Maintenance
6.1 Maintenance
6.1 Maintenance
6.1.1 Cleaning and protect the touch screen
6.1.1 Cleaning and protect the touch screen
6.1.1 Cleaning and protect the touch screen
6.1.1 Cleaning and protect the touch screen
The touch screen can be cleaned with a soft cloth and alcohol.
NOT
NOT
NOT not use any abrasive cleansers or automotive chemicals on the
NOTE�Do
touch screen.
6.1.2 Clean and inspect the unit
6.1.2 Clean and inspect the unit
6.1.2 Clean and inspect the unit
6.1.2 Clean and inspect the unit
When using the C68 unit, checking the housing, wiring, connectors for dirt
and damage before and after use.
6.1.3 Quick troubleshooting tips
6.1.3 Quick troubleshooting tips
6.1.3 Quick troubleshooting tips
6.1.3 Quick troubleshooting tips
1. Ensure that the scan tool is well connected to a power source and the LEDs
are illuminated.
2. Ensure the scan tool has been registered.
3. Ensure the software and diagnostic application software are updated.
4. Check all the cables, connections and indicators to see if the signal is being
received.
5. Do not use the scan tool beside the microwave ovens, cordless phones and
some medical or scientific instruments to prevent signal interference.
6.2 Warranty
6.2 Warranty
6.2 Warranty
6.2 Warranty
This warranty is expressly limited to persons who purchase products
for purposes of resale or use in the ordinary course of the buyer s
business. It s subject to the following terms and conditions:
1) product is warranted against defects in materials and workmanship
for two years (24 months) from date of delivery to the user.
2) The sole responsibility of under the Warranty is limited to either the
repair or, at the option of replacement of the tool at no charge with Proof
29
of Purchase. The sales receipt may be used for this purpose.
3) This warranty does not apply to damages caused by improper use,
accident, flood, lightning, or if the product was altered or repaired by
anyone other than the Manufacturer s Service Center.
It
It
4) It shall not be liable for any incidental or consequential damages arising
It
from the use, misuse, or mounting of the tool. Some states do not allow
limitations on how long an implied warranty lasts, so the above
limitations may not apply to you.
5) No agent, employee, or representative has any authority to bind to any
affirmation, representation, or warranty concerning automotive meters,
except as stated herein.
6) It reserves the right to make changes at any time without notice.
30

Wyszukiwarka

Podobne podstrony:
dpf doctor diagnostic tool for diesel cars function list
DIY Auto Computer Reset
DIY Auto Computer Reset
diagnostic tool v6 instructions
indexing tool manual
AUTO TRANS DIAGNOSIS AG4
Auto Tool Zero Script center button DRO report
Manual Hand Control for the Auto Guide Port
Auto Tool Zero Script X button hoss
Epson Stylus Pro 9000 Auto Take Up Reel Unit Manual
epb tool user manual
03 AUTO TRANS DIAGNOSIS MENU VOLKSWAGEN
Auto Tool Zero Script X button hoss
Auto Tool Zero Script Y button hoss
original carcare c68 car and language list

więcej podobnych podstron