SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
X
MAKE
LANCIA
MOD.
Y
YEAR
97 �ął PETROL
DIESEL
ALARM/SIREN
Position the compact alarms and the sirens on the panel of the left lateral wing, POSITION
driver’s side, between the battery and the headlamp. Run the cables through the original rubber plug located on the bulkhead that divides the engine compartment from the cabin, behind the shock absorber on the driver’s side.
CENTRAL UNIT POSITION
The modular systems and the modules should be positioned behind the left lateral panel under the dashboard on the driver’s side.
POWER SUPPLY
+ 30: Connect to the 5 mm2 RED wire in the 2 way black connector located down, on the left of the fuse box.
- 31: Connect with a cable-end connector to one of the ground pins located behind the left lateral panel on the driver’s side.
IGNITION WIRE
Connect to the 1,5 m2 BLUE/RED wire in the 18 way connector, the one furthest to the right at the fuse box.
DIRECTION INDICATORS
Connect to the 1,5 mm2 LIGHT BLUE and LIGHT BLUE/BLACK wires. They are located in the fuse box connectors (one is in the middle of the right vertical column and the other is in the middle of the lower row).
ELECTRIC WINDOWS
At rest negative
Driver’s window:
Cut the 1,5 mm2 RED/BLACK wire.
Passenger’s window:
Cut the 1,5 mm2 WHITE wire.
These wires are located in the wiring harness coming out of the respective switches.
CENTRAL DOORS LOCKING Negative control signal Connect to the 1 mm2 LIGHT BLUE (unlock) wire at the position n°13 and WHITE
(lock) wire at the position n° 8 in the wiring harness that comes out of the 14 way white connector located behind the left moquettes bulkhead on the driver’s side.
IMMOBILISATION POINT
Fuel pump
Cut the 1,5 mm2 BROWN/WHITE wire in the left connector , in the fuse box.
STARTER
+ 50: Cut the BROWN wire located in the wiring harness that comes out of the 10 A fuse, under the plastic cover, in the central area of the engine compartment.
BONNET SWITCH
Install an additional switch on the headlamp support grill, near the original bonnet bumper rubber.
DOORS SWITCH
Connect to the 1 mm2 WHITE/GREEN wire in the wiring harness that comes out of the driver’s door.
BOOT SWITCH
Connect to the 1 mm2 VIOLET/BLACK wire in the wiring harness that comes out of the 2 way connector of the rear lamp.
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed lay97gbb.doc
as per the instructions given on the product installation manual.
Wyszukiwarka
Podobne podstrony:
LATHE03GBB id 2491412 NieznanyLATHE03GBB id 2491412 NieznanyCISAX01GBD id 2064757 NieznanySGH 2200 id 2230801 Nieznany111003105109 stress id 2048457 NieznanyCIXS201GBD id 2064760 NieznanyTOCEL96GBB id 2491297 Nieznany1078 2 FEA209544 128UEN A id 22 NieznanyMcRib(r) Sandwich id 2201097 NieznanyBD V600 L3 C A3 V1[1] 1 id 2157 NieznanyDOC0534 id 2032985 Nieznany8 17 id 2009842 NieznanyREKAN02GBBT id 2491218 Nieznanycialo albatros id 2035175 Nieznany[17] FR540NT010 id 2085454 NieznanyRO7503GBDT id 2491245 Nieznanywięcej podobnych podstron