plik


ÿþSPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00 www.cobra.it PETROL X BMW Serie 6 04 ’! DIESEL ’! MAKE MOD. YEAR ALARM/SIREN Position the compact alarms and the sirens on the support of the shock absorber, driver s side. POSITION CENTRAL UNIT POSITION Position the modular sistems and the modules under the dashboard, driver s side. POWER SUPPLY +30: connect to the big wire located on the  POSITIVE climp directly in the battery. -31: connect to the big wire located on the  NEGATIVE climp marked directly in the battery, in the boot. IGNITION WIRE +15/54: connect to the VIOLET/WHITE wire, at the position nr.4, in the wiring harness coming out of the 41 way black connector, of the white central located on the left of the steering column, under the driver s side dashboard. DIRECTION INDICATORS System with separated lines Connect to the wires: BLUE/YELLOW at the pos. nr.22, VIOLET/BLACK at the pos. nr.39, BLUE/GREEN at the pos. nr.68, BLUE/BROWN at the pos. nr.61 and BLUE/BROWN with YELLOW references at the pos. nr.4, BLUE/GREY at the pos. nr.11 located in the 76 way white connection of the black central placed on the left of the steering column, under the driver s side dashboard. Separate the lines with 1N5406 diodes. ELECTRIC WINDOWS Comfort closing The windows closing is obtained using the original remote control. CENTRAL DOORS LOCKING Negative control signal Connect with both the OPEN and CLOSE wires of the antitheft to the YELLOW/RED wire at the position nr.28, from the 41 way black connector, in the white central located on the left of the steering column, under the driver s side dashboard. IMMOBILISATION POINT Fuel pump Cut the WHITE/BLUE or VIOLET/BLACK wire in the wiring harness coming out of the relé of the fuel pump located behind the glove compartment, passenger s side. STARTER +50: Cut the 2 mm2 BLACK wire at the position nr.22, in the 41 way black connector, of the white central located on the left of the steering column, under the driver s side steering column. BONNET SWITCH Install an additional switch on the headlamps support plate, driver s side. DOORS SWITCH Connect to the BLUE/RED wire at the pos. nr.54, of the 54 way black connector, of the black central behind the glove compartment, driver s side. BOOT SWITCH Connect to the WHITE/BROWN wire in the connector of the boot lamp. HORN CONTROL Positive control Connect to the VIOLET/GREY wire in the wiring harness on the side of the steering column, under the driver s side dash board. As alternative, the same wire is located in the taping wiring harness, behind the passenger s side glove compartment. Note: It is suggested to cut the wire with the NO, NC and COM contacts of the Cobra Connex. bmse604gbb.doc Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed as per the instructions given on the product installation manual.

Wyszukiwarka

Podobne podstrony:
GT 2004 petrol NO
SERIE 3 1998 petrol NO
A2 2004 2°sem 1 petrol NO
166 T S 1998 petrol NO
Serie 7 2003 diesel NO
PT CRUISER 2001 petrol NO
serie 5 2001 petrol YES
A4 2001 petrol NO
X3 2004 petrol YES
X 5 2001 petrol NO
530 2004 petrol YES
145 1997 petrol NO

więcej podobnych podstron