G03 Anti Clockwise arc with Centre Offsets

{\rtf1\ansi\ansicpg1252\deff0{\fonttbl{\f0\fnil MS Sans Serif;}{\f1\fnil\fcharset0 MS Sans Serif;}}
{\colortbl ;\red255\green0\blue0;\red0\green0\blue0;}
\viewkind4\uc1\pard\qc\cf1\lang2057\b\f0\fs24 G0\f1 3\f0 \f1 Anti \f0 Clockwise arc with Centre Offsets\cf2
\par \b0\fs20
\par \pard When programming arcs using absolute values (G90), the X and Y values describe the end point of the arc, in relation to the datum position of the workpiece. The arc end point is sometimes referred to as the target position.
\par
\par When programming arcs using incremental values (G91), the X and Y values relate to the distance moved along the X and Y axes, from the start point of the arc to the end point of the arc. The sign of the X and Y axis moves (+/-) will depend on the movement of the machine slides in relation to their start position.\cf1\b\fs24
\par
\par
\par }

Wyszukiwarka

Podobne podstrony:
G03 Anti Clockwise arc with Centre Offsets
G03 Anti Clockwise arc with Centre Offsets
G03 Anti Clockwise arc with Centre Offsets
G02 Clockwise arc with Centre Offsets
G02 Clockwise arc with Centre Offsets
G02 Clockwise arc with Centre Offsets
G03 Anti Clockwise arc with Radius
G03 Anti Clockwise Arc
G03 Clockwise arc with Radius
G02 Clockwise arc with Radius
G03 Circular Interpolation Anti Clockwise
G03 Circular Interpolation Anti Clockwise
G03 Circular Interpolation Anti Clockwise
G03 Circular Interpolation Anti Clockwise
Circular arc with Circle Center
Circular arc with Radius
Circular arc with Circle Center Polar

więcej podobnych podstron