www.GetPedia.com
Drawing and Detailing with SolidWorks
A Workbook for SolidWorks 2001/2001Plus
by Davi
C. Planchar
an
Marie P. Planchar

A Competency Based Approach Referencing the ASME Y14 Engineering
Drawing and Related Documentation Practices
COMPACT
AIR CYLINDER
CYLINDER ASSEMBLY
SECTION A-A
SDC
PUBLIC›TIONS
Schroff Development Corporation
www.schroff.com
www.schroff-europe.com
Drawing and Detailing with SolidWorks 2001/2001Plus Drawing Template and Sheet Format
Project 1
Drawing Template and Sheet Format
Below are the 
esire
outcomes an
usage competencies base
upon the
completion of this Project. Note: The foun
ation of a Soli
Works 
rawing is the
Drawing Template.
Project Desired Outcomes: Usage Competencies:
Empty Drawing Templates Apply Drawing Properties to reflect the
ASME Y14 Engineering Drawing an

Custom Sheet Format
Relate
Drawing Practices.
Custom Drawing Template
Knowle
ge an
un
erstan
ing of Drawing
Templates an
Sheet Formats.
Wis
om of importing an AutoCAD

rawing to create an
mo
ify a custom
Sheet Format.
PAGE 1 1
Drawing Template and Sheet Format Drawing and Detailing with SolidWorks 2001/2001Plus
Notes
PAGE 1 2
Drawing and Detailing with SolidWorks 2001/2001Plus Drawing Template and Sheet Format
Project 1  Drawing Template and Sheet Format
Project Objective
Create a C-size Drawing Template. Create an A-size Drawing Template.
Project Situation
As the 
esigner, your responsibilities inclu
e 
eveloping 
rawings that a
here to
the ASME Y14 American National Stan
ar
for Engineering Drawing an

Relate
Documentation Practices. The foun
ation for a Soli
Works 
rawing is
the Drawing Template. Drawing size, 
rawing stan
ar
s, units an
other
properties are 
efine
in the Drawing Template. Sheet Formats contain the
following: bor
er, title block, revision block, company name, logo, Soli
Works
Properties an
Custom Properties.
You are un
er time constraints to complete the project on sche
ule. Create a
Soli
Works custom Sheet Format. Import an existing AutoCAD C-size 
rawing.
Create a custom C-size Drawing Template an
an A-size Drawing Template.
A-Size Drawing Template with
SolidWorks Sheet Format
C-Size Drawing Template with
Imported AutoCAD Sheet Format
PAGE 1 3
Drawing Template and Sheet Format Drawing and Detailing with SolidWorks 2001/2001Plus
Project Overview
You will perform the following tasks in this Project:
" Create an empty C-size Drawing Template.
" Import an AutoCAD 
rawing an
save the 
rawing as a C-size Sheet
Format.
" Create a C-ANSI-MM Drawing Template.
" Combine the empty Drawing Template an
the Sheet Format.
" Create an empty A-size Drawing Template.
" Mo
ify an existing Soli
Works A-size Sheet Format.
" Create an A-ANSI-MM Drawing Template.
" Combine the empty Drawing Template an
the Sheet Format.
Empty C
Drawing
Template
C-SIZE-ANSI-MM-EMPTY.DRWDOT
AutoCAD Sheet Format
FORMAT-C-ACAD.DWG C-FORMAT.SLDDRT
Empty C Sheet Format
Drawing
Template
C-ANSI-MM.DRWDOT
C-SIZE-ANSI-MM-EMPTY.DRWDOT C-FORMAT.SLDDRT
Empty A Sheet Format
Drawing
Template
A-ANSI-MM.DRWDOT
A-SIZE-ANSI-MM-EMPTY.DRWDOT A-FORMAT.SLDDRT
Conserve 
rawing time. Create a custom Drawing Template an
Sheet Format.
The Drawing Template an
Sheet Format contain global 
rawing an

etailing
stan
ar
s. Note: Dimensioning techniques are similar for non-ANSI 
imension
stan
ar
s.
PAGE 1 4
Drawing and Detailing with SolidWorks 2001/2001Plus Drawing Template and Sheet Format
SolidWorks Tools and Commands
The following Soli
Works tools an
comman
s are utilize
in this Project:
SolidWorks Tools and Commands
Drawing Template Tools, Options, Tools, Options,
System Options Document Properties
Stan
ar
Sheet Format Custom Sheet Format No Sheet Format
Paper Size Sheet Setup Scale
Drawing Options Display Mo
es Tangent E
ge
File A
ocations A
ine Styles an
Detailing options
Thickness
Dimensioning Stan
ar
Font Arrows
A
ine Font DXF/DWG Import E
it Sheet/E
it Sheet
Format
Note A
ink to Property Custom Property
A

itional information on Soli
Works tools an
other comman
s are foun
in the
On-A
ine Help.
PAGE 1 5
Drawing Template and Sheet Format Drawing and Detailing with SolidWorks 2001/2001Plus
Engineering Drawing and Related Documentation Practices
Drawing Templates in this section are base
upon the American Society of
Mechanical Engineers ASME Y14 American National Stan
ar
for Engineering
Drawing an
Relate
Documentation Practices. These stan
ar
s represent the

rawing practices use
by U.S. in
ustry. The ASME Y14 practices superse
e the
American National Stan
ar
s Institute ANSI stan
ar
s. The ASME Y14
Engineering Drawing an
Relate
Documentation Practices are publishe
by The
American Society of Mechanical Engineers, New York, NY. References to the
current ASME Y14 stan
ar
s are use
with permission.
ASME Y14 American National Standard Revision of the Standard
Standard Name Engineering Drawing and
Related Documentation
ASME Y14.100M- Engineering Drawing Practices DOD-STD-100
1998
ASME Y14.1-1995 Decimal Inch Drawing Sheet ANSI Y14.1
Size and Format
ASME Y14.1M- Metric Drawing Sheet Size and ANSI Y14.1M
1995 Format
ASME Y14.24M Types and Applications of ANSI Y14.24M
Engineering Drawings
ASME Y14.2M Line Conventions and ANSI Y14.2M
(Reaffirmed 1998) Lettering
ASME Y14.3M- Multiview and Sectional View ANSI Y14.3
1994 Drawings
ASME Y14.5M  Dimensioning and Tolerancing ANSI Y14.5-1982(R1988)
1994(Reaffirmed
1999)
Only a portion of the ASME Y14 American National Stan
ar
for Engineering
Drawing an
Relate
Documentation Practices are presente
in this book.
Information presente
in Projects 1 - 5 represent sample illustrations of a 
rawing,
view an
or 
imension type. The ASME Y14 Stan
ar
s Committee 
evelops an

maintains a

itional Drawing Stan
ar
s. Members of these committees are from
In
ustry, Department of Defense an
Aca
emia.
PAGE 1 6
Drawing and Detailing with SolidWorks 2001/2001Plus Drawing Template and Sheet Format
Companies create their own 
rawing stan
ar
s base
upon one or more of the
following:
" ASME Y14
" ISO or other International 
rawing stan
ar
s
" Ol
er ANSI stan
ar
s
" Military stan
ar
s
Of course there is also the  We ve always 
one it this way 
rawing stan
ar
or
 Go ask the Drafting Supervisor 
rawing stan
ar
.
PAGE 1 7
Drawing Template and Sheet Format Drawing and Detailing with SolidWorks 2001/2001Plus
Drawing Template
The foun
ation of a Soli
Works 
rawing is the Drawing Template. Drawing size,

rawing stan
ar
s, company information, manufacturing an
or assembly
requirements, units an
other properties are 
efine
in the Drawing Template.
The Sheet Format is incorporate
into the Drawing Template. The Sheet Format
can contain bor
er, title block an
revision block information, company name an

or logo information, Custom Properties an
or Soli
Works Properties.
Create a custom Drawing Template. Soli
Works starts with a 
efault Drawing
Template. Select the No Sfheet Format. Create a custom Sheet Format from the

efault 
rawing template.
The 
efault Soli
Works Stan
ar
Sheet Format is A-A
an
scape.
A-A
an
scape
Note: The ASME Y14.1-1995 Decimal Inch Drawing Sheet Size an
Format an

ASME Y14.1M-1995 Metric Drawing Sheet Size an
format stan
ar

efine the
sheet size specification in inch an
metric units respectively.
Drawing Size refers to the physical paper size use
to create the 
rawing. The
most common paper size in the U.S. is A size: (8.5in. x 11in.). The most common
paper size internationally is A4 size: (210mm x 297mm).
The ASME Y14.1-1995 an
ASME Y14.1M-1995 stan
ar
s contain both a
horizontal an
vertical format for A an
A4 size, respectively.
The correspon
ing Soli
Works format is A
an
scape for horizontal an
Portrait for
vertical.
Drawing sizes A through E are pre
efine
in Soli
Works. Drawing sizes F, G, H,
J & K are User Define
in the No Sheet Format 
rop

own list. Metric 
rawing sizes A4 through A0 are
pre
efine
in Soli
Works. Metric roll paper sizes are
User Define
in the No Sheet Format 
rop 
own list.
PAGE 1 8
Drawing and Detailing with SolidWorks 2001/2001Plus Drawing Template and Sheet Format
The ASME Y14.1-1995 Decimal Inch Drawing Sheet Size stan
ar
are as
follows:
Drawing Size Size in inches
 Physical Paper Vertical orizontal
A horizontal (landscape) 8.5 11.0
A vertical (portrait) 11.0 8.5
B 11.0 17.0
C 17.0 22.0
D 22.0 34.0
E 34.0 44.0
F 28.0 40.0
G, H, J and K apply to roll
sizes, User Defined
The ASME Y14.1M-1995 Metric Drawing Sheet Sizes stan
ar
are as
follows:
Drawing Size Size in Millimeters
 Physical Paper Vertical orizontal
A0 841 1189
A1 594 841
A2 420 594
A3 297 420
A4 horizontal (landscape) 210 297
A4 vertical (portrait) 297 210
Caution shoul
be use
when sen
ing electronic 
rawings between U.S. an

International colleagues. Drawing paper sizes vary.
PAGE 1 9
Drawing Template and Sheet Format Drawing and Detailing with SolidWorks 2001/2001Plus
Example: An A-size (11in. x 8.5in.) 
rawing (280mm x 216mm) 
oes not fit a A4
metric 
rawing (297mm x 210mm). Use a larger paper size or scale the 
rawing
using the printer setup options.
Note: The Sheet Formats, parts an
assemblies require
to complete the projects in
Drawing and Detailing with SolidWorks 2001/2001Plus are only available
on-line at: www.schroff1.com.
Download the 2001drwparts file folder from www.schroff1.com.
1) Enter www.schroff1.com from your web browser.
2) Click the hypertext: Drawing and Detailing with SolidWorks 2001/2001Plus.
The file folder, 2001drwparts is downloaded.
Start a SolidWorks session.
3) Click Start on the Windows Taskbar, . Click Programs. Click the
SolidWorks folder.
4) Click the SolidWorks application. The SolidWorks program window
opens.
Create an Empty C size Drawing Template.
5) Click New . Click Drawing. Click OK.
6) Select No Sheet Format from the Sheet
format to Use
dialog box. Select
C-Landscape
from the Paper
size drop down
list. Click OK.
The C-A
an
scape Drawing Template is 
isplaye
in a
new Graphics win
ow. The sheet bor
er 
efines the
C 
rawing size, (22in. x 17in.). A
an
scape in
icates
A
an
scape Portrait
that the larger 
imension is along the horizontal.
Portrait in
icates that the larger 
imension is along the
vertical. Note: Portrait is only an option for A an
A4
paper size.
PAGE 1 10
Drawing and Detailing with SolidWorks 2001/2001Plus Drawing Template and Sheet Format
The Drawing toolbar an
Annotations toolbar are 
isplaye
left of the Graphics
win
ow. The FeatureManager is 
isplaye
to the left of the Graphics win
ow.
The Sketch an
Sketch Tools toolbars are 
isplaye
to the right of the Graphics
win
ow.
Empty
Drawing
Template 
No Sheet
Format
7) Right click in the Graphics window. Click Properties. The Sheet Setup Properties
are displayed.
Set the Sheet Properties.
8) The default sheet Name is Sheet1.
The Paper size is C Landscape. A
drawing can contain one or more
sheets. Sheet scale controls the
default scale. The default Sheet Scale
is 1:1. Click Third Angle for Type of
Projection. Click OK.
The Automatic scaling of 3 view
option, scales the three stan
ar
views
to fit the 
rawing sheet. Examples of
Thir
Angle an
First Angle projection
are 
evelope
in Project 2. Thir
Angle
projection is primarily use
in the Unite
States. For company s supporting a First
Angle projection scheme, views in Project 2 are place
in 
ifferent locations.
PAGE 1 11
Drawing Template and Sheet Format Drawing and Detailing with SolidWorks 2001/2001Plus
System Options and Document Properties
System Options are store
in the registry of the computer. System Options is not
part of the 
ocument. Changes to the System Options affect all current an
future

ocuments.
ANSI or ISO Dimension Stan
ar
, Units an
other Properties are set in Document
Properties. Document Properties apply only to the current 
ocument. When you
save the current 
ocument as a template, the current parameters are store
with the
template. New 
ocuments that utilize the same template contain these set
parameters.
Conserve 
rawing time. Set the System Options an
Document Properties before
you begin a 
rawing.
Set System Options.
9) Set the Drawings options used in this text. Click Tools, Options, System Options,
Drawings. Note: Drawing options can be turned on or off.
PAGE 1 12
Drawing and Detailing with SolidWorks 2001/2001Plus Drawing Template and Sheet Format
Drawings
Options are
available from
the On-A
ine help.
10) Click the Help
button in the
System
Options dialog
box. The
Drawings
Options help is
displayed.
Review each
Drawing
option. Drag
the Scroll bar
downward.
Minimize the
Help window.
On-line Help
is a great
resource for
a

itional
information on Soli
Works functions. Help is accessible through the Help
button, F1 key, Main menu an
 ? icon.
Review the 
isplay mo
es settings for a new 
rawing.
Review the tangent e
ges setting for a new 
rawing.
Displaye
mo
es an
tangent e
ge settings can be change
in the in
ivi
ual

rawing view.
PAGE 1 13
Drawing Template and Sheet Format Drawing and Detailing with SolidWorks 2001/2001Plus
11) Set the Default Display Type. Click Default Display Type below the Drawings text.
Click Hidden removed for the Default display mode for new drawing views. Click
Removed for the Default display of tangent edges in the new drawing views.
Click OK.
Sha
e
Option (2001 Plus)
Set the File A
ocations to the 2001
rwparts Fol
er for Drawing Templates.
Set File Locations for Drawing Templates.
12) Click File Locations from the System Options tab. Select Drawing Templates from
the Show Folders for Drop down list. Click Add button. Browse. Select the
2001drwparts folder that you downloaded from www.Schroff1.com. Click OK.
Note: The 2001drawparts tab appears in the
New SolidWorks Drawing dialog box. The
Drawing Templates that you create will be
saved to the 2001drawparts file folder.
PAGE 1 14
Drawing and Detailing with SolidWorks 2001/2001Plus Drawing Template and Sheet Format
The Drawing Properties Detailing options provi
e the ability to a

ress:

imensioning stan
ar
s, text style, center marks, witness lines, arrow styles,
tolerance an
precision. Drawing Properties are store
with the Drawing
Template.
There are numerous text styles an
sizes available in Soli
Works. Companies

evelop 
rawing format stan
ar
s an
use specific text height for Metric an

English 
rawings. The ASME Y14.2M-1992(R1998) stan
ar
lists the lettering,
arrowhea
an
line conventions an
lettering conventions for engineering

rawings an
relate

ocumentation practices. Examples:
" Font: Utilize a single stroke, gothic lettering in all upper case letters. Use a
single font. Century Gothic is the 
efault Soli
Works font. Create a test page
to insure that both Win
ows an
your particular Printer/Plotter 
rivers support
the selecte
font.
" Minimum letter height will vary 
epen
ing upon usage on a 
rawing:
o Minimum letter height use
for 
rawing title, 
rawing size, CAGE
Co
e, 
rawing number an
revision letter positione
insi
e the Title
block is .12in. (3mm) for A, B an
C inch sizes an
A2, A3 an
A4
metric 
rawing sizes: Text height is .24in. (6mm) for D an
E inch

rawing sizes an
A0, A1 metric 
rawing sizes.
o Minimum letter height for Section views, Zone letters an
numerals is
.24in. (6mm) for all 
rawing sizes. Set Text size for Section, Detail
an
View font to 6mm.
o Minimum letter height for 
rawing block hea
ings is .10in. (2.5mm)
for all 
rawing sizes.
o Minimum letter height for all other characters is .12in. (3mm) for all

rawing sizes. Set Text size for Dimension an
Note Font to 3mm.
" Arrowhea
s: Utilize soli
fille
single style arrowhea
, with a 3:1 ratio of
arrow length to arrow wi
th. The arrowhea
wi
th is proportionate to the line
thickness. The Dimension line thickness is 0.3mm. In this project, the arrow
length is 3mm. Arrow wi
th is 1mm. Soli
Works 
efines arrow size with
three options: Height, Wi
th an
A
ength. Height correspon
s to arrow wi
th.
Wi
th correspon
s to arrow length. A
ength correspon
s to the 
istance from
the tip of the arrow to the en
of the tail.
" The Section line thickness is 0.6mm. The arrow length is 6mm. The arrow
wi
th is 2mm.
" A
ine Wi
ths: The ASME Y14.2M-1992(R1998) stan
ar
recommen
s two
line wi
ths with a 2:1 ratio. The minimum wi
th of a thin line is 0.3mm.
The minimum wi
th of a thick,  normal line is 0.6mm. Note: A single wi
th
PAGE 1 15
Drawing Template and Sheet Format Drawing and Detailing with SolidWorks 2001/2001Plus
line is acceptable on CAD 
rawings. Two line wi
ths are use
in this Project;
Thin: 0.3mm an
Normal: 0.6mm. Apply A
ine Styles in the A
ine Font
Document Properties. A
ine Font 
etermines the appearance of a line in the
Graphics win
ow. Soli
Works styles utilize
in this Project are as follows:
SolidWorks Thin (0.3mm) Normal (0.6mm)
Line Style
Solid
Dashed
Phantom
Chain
Center
Stitch
Thin/Thick Chain
Various printers/plotters allow variable A
ine Weight settings. Example: Thin
(0.3mm), Normal (0.6mm) an
Thick (0.6mm). Refer the printer/plotter owner s
manual for A
ine Weight setting.
A
ine Font: The ASME Y14.2M-1992(R1998) stan
ar
a

ress the type an
style
of lines use
on engineering 
rawings. Combine 
ifferent styles an
use 
rawing
A
ayers to achieve the following types of lines:
PAGE 1 16
Drawing and Detailing with SolidWorks 2001/2001Plus Drawing Template and Sheet Format
ASME Y14.2- SolidWorks Style Thickness
1992(R1998) Line Font
TYPE of LINE Type of Edge
and an example
Visible line displays Visible Edge Solid Thick  Normal
the visible edges or
contours of a part.
Hidden line displays Hidden Edge Dashed Thin
the hidden edges or
contours of a part.
Section lining displays Crosshatch Solid Thin
the cut surface of a
part/assembly in a Different Hatch
section view. patterns relate to
different materials
Center line displays Construction Center Thin
the axes of center Curves
planes of symmetrical
parts/features.
Symmetry line Sketch Thin Center
displays an axis of Line and Thick
symmetry for a partial Visible lines on
view. drawing Layer .
Dimension Dimensions Solid Thin
lines/Extension
lines/Leader lines
combine to dimension
Extension Line
drawings.
Leader Line
Cutting plane line or Section Line Phantom Thick
Viewing plane line
display the location of View Arrows Solid Thick,  Normal
a cutting plane for
sectional views and
the viewing position
for removed views.
PAGE 1 17
Drawing Template and Sheet Format Drawing and Detailing with SolidWorks 2001/2001Plus
ASME Y14.2- SolidWorks Line Style Thickness
1992(R1998) Font Type of Edge
TYPE of LINE
and an example
Break line displays Broken view
an incomplete
view. Use Curved for
Short Breaks
Short Breaks
Use Small Zig
Long Breaks Zag for Long
Breaks
Phantom line Sketch Thin
displays alternative Phantom Line on
position of moving drawing Layer
parts.
Stitch line displays Sketch Thin
a sewing or Stitch Line on
stitching process. drawing Layer
Chain line displays Sketch Thick
a surface that Chain Line on
requires more drawing Layer
consideration or
the location of a
projected tolerance
zone.
Note: The following lines are not pre
efine
in Soli
Works: Symmetry line,
Phantom line, Stitch line an
Chain line. The line style an
thickness for the
above line types are 
efine
on a separate 
rawing layer.
PAGE 1 18
Drawing and Detailing with SolidWorks 2001/2001Plus Drawing Template and Sheet Format
Set Drawing Properties.
13) Set Detailing Options. Click
Document Properties tab.
Select Units from the left text box.
Click Millimeters from the Linear
Units drop down list. Enter 2 for
Decimal places.
Note: Set units before entering
values for Detailing options.
14) Click Detailing. Select ANSI from
the Dimensioning standard drop
down list. Detailing options are
available depending upon the
selected standard.
Drawing an
option availabilities
are affecte
by various Drawing
Properties.
The Dimensioning stan
ar
options
are: ISO, DIN, JIS, BSI, GOST an

GB. Obtain a

itional 
rawing
options through the On-A
ine Help.
Review the Detailing options
function before entering their
values.
Millimeter 
imensioning an

ecimal inch 
imensioning are the two types of units
specifie
on engineering 
rawings. There are other 
imension types specifie
for
commercial commo
ities such as pipe sizes an
lumber sizes.
Develop separate 
rawing templates for 
ecimal inch units. Text height, arrows
an
line styles are 
efine
with inch values accor
ing to the
ASME Y14.2-1992(R1998) A
ine Conventions an
A
ettering stan
ar
.
The Dual 
imensions 
isplay check box shows 
imensions in two types of units.
Example: Select Dual 
imensions 
isplay. Select the On top option. The primary
unit 
isplay is 100mm. The secon
ary units 
isplay is [3.94] inches.
PAGE 1 19
Drawing Template and Sheet Format Drawing and Detailing with SolidWorks 2001/2001Plus
The Fixe
size wel
symbols checkbox

isplays the size of the wel
symbol. Scale
accor
ing to the 
imension font size.
The Display 
atums per 1982 checkbox shows the ANSI
Y14.5M-1982 
atums.
The ASME Y14.5M-1994(R1999) 
atums are use
in this text.
The ASME Y14.2M-1992(R1998) stan
ar

supports two 
isplay styles for the Cutting-plane
line or Viewing-plane line. The 
efault section
line 
isplays with a continuous Phantom line
type(D-D). Check the Alternate section 
isplay to allow the arrow en
s to stop at
the en
s of the section cut(B-B).
The Centerline extension value
controls the extension length beyon

the section geometry. Set the
extension length to 3mm.
Center marks specifies the 
efault
center mark size use
with arcs an

circles. Center marks are 
isplaye
with
or without center mark lines. The center
mark lines exten
just beyon
the
circumference of the selecte
circle. Set
the 
efault center mark size to 0.5mm.
Base the center mark size on the 
rawing
size an
scale.
PAGE 1 20
Drawing and Detailing with SolidWorks 2001/2001Plus Drawing Template and Sheet Format
Soli
Works uses the term
Witness lines. Witness lines
1.5mm
are Extension lines as

efine
in the ASME
Y14.2M-1992(R1998) an

ASME Y14.5M-
1994(R1999) stan
ar
. A
3mm
visible Gap exists between
the Extension line an
the Visible line. The Extension line exten
s 3mm beyon

the Dimension line. Set Gap to 1.5mm. Set the Extension to 3mm. Note: The
values 1.5mm an
3mm are a gui
e. Base the Gap an
Extension line on the

rawing size an
scale.
The Next 
atum feature label specifies the next upper case letter use
for
the Datum Feature Symbol. The 
efault value is A. Successive labels are
in alphabetical or
er.
The Datum 
isplay type Per Stan
ar
shows a fille
triangular symbol on the
Datum Feature.
The Break line gap specifies the size of the gap
between the Broken view break lines. Set the
Broken view break lines to 10mm.
10mm
The Detail Font button specifies the font type an

size use
for the letter labels on the 
etail circles. Set the Detail font to Century
Gothic. Set the size to 6mm.
The Section Font button specifies the font type an
size use

for the letter labels on the section lines. Set the Section font to
Century Gothic. Set the size to 6mm.
The View Arrow Font button specifies the font type an
size
use
for the letter labels on the view arrows. Set the View
Arrow font to Century Gothic. Set the size to 6mm.
Set the values in Soli
Works to meet the ASME stan
ar
.
PAGE 1 21
Drawing Template and Sheet Format Drawing and Detailing with SolidWorks 2001/2001Plus
Set Detail Options.
15) Enter 3mm for the
Centerline extension.
16) Enter 0.5mm for the Center
marks.
17) Modify the Witness lines
(Extension line) values.
Enter 1.5mm for Gap.
Enter 3mm for Extension.
18) Enter 10mm for the Break
line gap. Note: There is no
set value for the Break line
gap. Increase the value to
accommodate a revolved
section.
2001Plus
19) Set the Detail Font. Click
the Detail Font button. Enter 6mm for text. Repeat for Section Font and View
Arrow Font. Accept all other defaults from the Detailing text box.
20) Review the Dimension options. Click Dimensions from the left side of the Detailing
text box.
PAGE 1 22
Drawing and Detailing with SolidWorks 2001/2001Plus Drawing Template and Sheet Format
The Dimension
options 
etermine the

isplay an
position of
text an
extension
lines. Reference

imensions require
parentheses. Many
features were create

with symmetry an
the

imension scheme
must be re
efine
in
the 
rawing. Uncheck
the A

parentheses
by 
efault to save
time. Parenthesis can
be a

e
to a

imension at anytime
through the Property
2001 Plus
option.
The ASME Y14.5M-
1994(R1999) stan
ar

set gui
elines for

imension spacing.
The space between the
first 
imension line an
the part outline
shoul
not be less than 10mm. The
space between subsequent parallel

imension lines shoul
not be less than
6mm. Spacing may be 
ifferent

epen
ing upon 
rawing size an
scale.
Set the offset 
istance from the last

imension to 6mm. Set the offset

istance from the mo
el to 10mm.
Arrow hea
s can be opene
or fille
.
10 6
The ASME Y14.2M-1992(R1998)
stan
ar
recommen
s a soli
fille

arrow.
The ASME Y14.5M-1994(R1999) stan
ar
states
that crossing 
imension lines shoul
be avoi
e
.
When 
imension lines cross, close to an arrowhea
,
the extension line (Witness line) must be broken.
PAGE 1 23
Drawing Template and Sheet Format Drawing and Detailing with SolidWorks 2001/2001Plus
Drag the
extension line
above the
arrowhea
.
Sketch a new
line collinear
with the
extension line below the arrowhea
.
For 2001Plus: Set the Break Dimension A
ine Gap to 1.5mm. Uncheck the Break
aroun
the 
imension arrows. Control in
ivi
ual breaks on 
imensions for this
project.
A
ea
er lines are create
with a small horizontal segment. This is
calle
the Bent A
ea
er line length. Set the Bent A
ea
er line
length to 6mm.
6
Select the Font button to set the Dimension text height. All

imension text is set to 3mm.
Set Dimensions options.
21) Uncheck the Add Parentheses by Default check
box.
22) Set the Offset distances to 6mm and 10mm.
23) Set the Arrow style to Solid.
24) For 2001Plus: Enter 1.5mm for the Gap in the
Break Dimension Witness/Leader Lines.
Uncheck the Break around dimension arrows
only.
25) Enter 6mm for the Bent leader length.
26) Click the Font button. Enter 3 for Units in the
Height text box. Century Gothic is the default
Font. Click OK.
2001Plus
Note: Text positione
on the 
rawing, outsi
e the
Title block, are the same font an
height as the
Dimension font. There are exceptions to the rule.
When a Note refers to a specific ASME
Y14.100M-1998 Engineering Drawing Practices
exten
e
symbol. Example:
h is the text
height
2h
h
PAGE 1 24
Drawing and Detailing with SolidWorks 2001/2001Plus Drawing Template and Sheet Format
Use Upper case letters unless lower case is require
. Example: HCl  Har
ness
Critical Item requires a lower case  l .
Mo
ify Note Bor
er Style to create boxes, circles, triangles an
other shapes
aroun
the text. Mo
ify the bor
er height. Use the Size option.
Set Notes options.
27) Click Notes from the left
side of the Detailing text
box.
28) Click the Font button.
Enter 3 for Units in the
Height text box. Century
Gothic is the default Font.
Click OK.
29) Check Use Bent leaders.
Enter 6mm for the Leader
Length.
Balloon callouts label the
parts in an assembly an

relate them to the item
numbers in the Bill of
Materials.
Set the drawing Balloon Properties.
30) Click Balloons from the left side of the
Detailing text box.
31) For 2001Plus: Check Use bent leaders.
Enter 6mm for the Leader length.
Set Arrows Properties accor
ing to the ASME
Y14.2M-1992(R1998) stan
ar
at a 3:1 ratio for
Wi
th:Height. The A
ength value is the overall
length of the arrow from the tip of the hea
to the
Arrow
en
of the tail. The A
ength is 
isplaye
when the
A
ength

imension text is flippe
to the insi
e. A Soli

fille
arrowhea
is the preferre
arrow type for

imension lines. Arrow sizes change 
ue to

rawing size an
scale. The ratio of wi
th to
height remains at 3:1.
PAGE 1 25
Drawing Template and Sheet Format Drawing and Detailing with SolidWorks 2001/2001Plus
Set Arrow Properties.
32) Click the Arrows entry
on the left side of the
Detailing text box. The
Detailing  Arrows dialog
box is displayed. Enter
1 for the arrow Height in
the Size text box. Enter
3 for the arrow Width. Enter 6 for the arrow Length. Set the arrow style. Under the
Section/View size, Enter 2 for Height, 6 for Width and 12 for Length.
33) Click the solid filled arrowhead from the
Edge/vertex list box. Click the solid filled dot from
the Face/surface list box.
The A
ine Font 
etermines the Style an

Thickness for a particular type of e
ge in a

rawing. Mo
ify the Type of e
ge, Style an

Thickness to reflect the ASME Y14.2M-1992(R1998) stan
ar
.
Recall that two line weights are 
efine
in the ASME Y14.2M-1992(R1998)
stan
ar
; namely 0.3mm an
0.6mm. Thin Thickness is 0.3mm. Thick
(Normal) Thickness is 0.6mm. Review line weights as 
efine
in the File,
PageSetup or in File, Print, System Options for your particular printer/plotter.
Soli
Works controls the line weight 
isplay in the Graphics win
ow. Use
Thin Thickness an
Normal Thickness in the Graphics win
ow. Change all
Thick Thickness settings to Normal Thickness. Change Detail Circle Style to
Phantom. Change View Arrows Style to Phantom.
Set Line Font Properties.
34) Click Line Font from the left side of the Detailing text box. Click Detail Circle for the
Type of edge. Select Phantom for Style. Select Normal for Thickness.
Thick Thickness is too wide for Graphics
window display. Change to Normal
Thickness
Normal Thickness
PAGE 1 26
Drawing and Detailing with SolidWorks 2001/2001Plus Drawing Template and Sheet Format
35) Click Section line for the Type of edge. Click Normal for Thickness.
36) Click View Arrows for the Type of edge. Click Solid for Style. Click Normal for
Thickness.
37) Exit Drawing Properties. Click OK.
38) Click the Graphics window. The drawing border is displayed in green.
The empty Drawing Template contains no geometry. The empty Drawing Template
contains the Document Properties and the Sheet Properties: Sheet name, Paper size,
No Sheet Format and Third Angle Projection.
Empty Drawing Template
Sheet Properties Document Properties
39) Save the empty Drawing Template. Click File, Save As. Select Drawing
Templates(*.drwdot) from the Save as Type list. Select the Browse button. Select
the 2001drwparts for the Save in file folder.
40) Enter C-SIZE-ANSI-MM-EMPTY for the File name. Click the Save button.
PAGE 1 27
Drawing Template and Sheet Format Drawing and Detailing with SolidWorks 2001/2001Plus
Sheet Format
Empty Custom Custom
Drawing Sheet Drawing
Customize 
rawing Sheet
Template Format Template
Formats to create an

match your company s
ANSI

rawing stan
ar
s.
A Custom
Properties
A customer requests a
new pro
uct. The
engineer 
esigns the
B Custom
Properties
pro
uct in one location,
the company pro
uces the
pro
uct in a secon

location an
the fiel

MACHINE
ISO
PARTS
engineer supports the
customer in a thir

location. The ASME
PLASTIC
Y14.24M stan
ar

PARTS

escribes various types of

rawings.
SHEET
Example: Engineering
METAL
pro
uces 
etaile
an

assembly 
rawings. The

rawings are use
for machine
, plastic an
sheet metal parts that contain specific
tolerances an
notes use
in fabrication. Manufacturing a

s ven
or item

rawings with tables an
notes. Fiel
Service requires installation 
rawings that
are provi
e
to the customer. Sheet formats are create
to support various
stan
ar
s an

rawing types.
There are numerous ways to create a custom Sheet Format:
" Open a Soli
Works, AutoCAD, Pro/ENGINEER or other CAD software
save
as file type,  .
wg . Save the  .
wg file as a Sheet Format.
" Right-click in the Graphics win
ow. Select E
it Sheet Format. Create

rawing bor
ers, title block, notes an
zone locations for each 
rawing
size. Save each 
rawing format.
" Right-click Properties in the Graphics win
ow. Select Properties. Select
Custom from the Sheet Format 
rop 
own list. Browse to select an
existing Sheet Format.
" A

an OA
E supporte
Sheet Format such as a bitmap file of the title
block an
notes. Use the Insert, Object comman
.
PAGE 1 28
Drawing and Detailing with SolidWorks 2001/2001Plus Drawing Template and Sheet Format
Use an existing AutoCAD 
rawing, FORMAT-C-ACAD.
wg in the
2001
rwparts file fol
er. Import an AutoCAD 
rawing as the Sheet Format. Save
the Sheet Format, C-FORMAT.sl

rt.
A

the Sheet Format C-FORMAT.sl

rt to the empty C-size Drawing Template.
Create a new 
rawing template; C-ANSI-MM.
rw
ot. A

an A-size Sheet
Format, A-FORMAT.sl

rt to an empty A-size Drawing Template. Create an
A-ANSI-MM.
rw
ot Drawing Template.
FORMAT-C-ACAD.DWG C-FORMAT.SLDDRT
C-ANSI-MM.DRWDOT
C-SIZE-ANSI-MM-EMPTY.DRWDOT C-FORMAT.SLDDRT
A-ANSI-MM.DRWDOT
A-SIZE-ANSI-MM-EMPTY.DRWDOT A-FORMAT.SLDDRT
Views from the part or assembly are inserte
into the Soli
Works Drawing.
Top, Front, Right
views of part.
PART/ASSEMBLY
Soli
Works
Drawing Sheet Format
TITLE BLOCK
Drawing
LOGO
Template
CUSTOM
PROPERTIES
ANSI
UNITS  MM
FONT/ARROWS/
LINE STYLES
LAYERS
PAGE 1 29
Drawing Template and Sheet Format Drawing and Detailing with SolidWorks 2001/2001Plus
Open the AutoCAD drawing C FORMAT.dwg.
41) Click File, Open. Select Dwg Files (*.dwg) from the Files of type drop down list.
Browse and select FORMAT-C-ACAD from the 2001drwparts file folder.
Click Open.
42) Click Import to a
new drawing from
the DXF/DWG
Import dialog box.
Click Next.
43) Select C-Landscape for Paper Size. Select the Browse button. Select the
2001drwparts for the Save in file folder. Select the C-SIZE-ANSI-MM-EMPTY for
Drawing Template. Click Open button. Click the Show Preview check box. View
the Sheet Format. Click Next.
PAGE 1 30
Drawing and Detailing with SolidWorks 2001/2001Plus Drawing Template and Sheet Format
44) Click Import all data to Sheet Format. Click Finish. The Sheet Format is displayed
on the Drawing Template.
Data imported from other CAD systems may
require editing in SolidWorks to produce desired
results.
45) Right click in the Graphics window. Click Edit
Sheet Format.
46) Click Zoom in on the title block. There are two coincident horizontal lines below the
CONTRACT NUMBER text. Click the first horizontal line below the CONTRACT
NUMBER. Remove the line. Press the Delete key. Click the second horizontal line
below the CONTRACT NUMBER. Remove the line. Press the Delete key. Lines
and text created from the AutoCAD title block are edited in the Edit Sheet Format.
47) Align the NAME text and DATE text. Hold the Ctrl key down. Click NAME text. Click
the DATE text. Right click Align. Click Uppermost. Release the Ctrl key.
Note: Add drawing notes and title block information in the Edit
Sheet Format mode. This saves on rebuild time.
The sheet boun
ary an
major title block hea
ing are 
isplaye
with a THICK
line style. Mo
ify the 
rawing layer THICKNESS.
PAGE 1 31
Drawing Template and Sheet Format Drawing and Detailing with SolidWorks 2001/2001Plus
48) Display the Layers dialog box. Click the Layer Properties folder
from the Layer toolbar. Rename the AutoCAD layer
THICKNESS to THICK. Rename description from THICK to THICK BORDER. Click
the line Thickness in the THICK layer. Select the second line thickness. Display
the Thick line. Click OK.
49) The border and title block display the Thick line. The left line in the title block is on the
Thin layer. Click on the left
line. Click Thick layer.
Note: Some printers cannot

isplay the outsi
e sheet
boun
ary an
or the Zone text.
50) Return to the Edit Sheet. Right click in the Graphics window.
Click Edit Sheet.
51) Click the drop down arrow in the Layer text box. Click None for
Layer.
Note: Save Sheet Formats and Drawing Templates in the Edit
Sheet mode. Drawing views are not displayed in the Edit Sheet
Format mode. The Layer None is saved with the Drawing
Template.
PAGE 1 32
Drawing and Detailing with SolidWorks 2001/2001Plus Drawing Template and Sheet Format
52) Save the Sheet Format. Click File, Save Sheet Format.
New
Open
Close
Save
Save As
Save to Web
Save Sheet Format
53) Click Custom
Sheet Format.
Browse. Select
the
2001drwparts file
folder.
54) Enter C-FORMAT. The
Sheet Formats file
extension is  .slddrt .
Click Save. Click OK.
PAGE 1 33
Drawing Template and Sheet Format Drawing and Detailing with SolidWorks 2001/2001Plus
Title Block Notes and Properties
Title blocks contain vital part an
assembly information. Each company creates a
unique version of a title block. Most title blocks contain the following type of
information:
Company Name/A
ogo Part number
Part name Drawing number
Drawing 
escription Revision number
Sheet number Material & finish
Tolerance Drawing scale
Sheet size Revision block
CAD file name Engineering Change Or
ers
Quantity require
Drawn by
Checke
by Approve
by
A title block is normally locate
in the lower right han
corner of the 
rawing.
You nee
to be in the E
it Sheet Format mo
e to mo
ify the Sheet Format text,
lines or title block information. You nee
to be in the E
it Sheet mo
e to insert
mo
el views. E
it Sheet an
E
it Sheet Format are the two major 
esign mo
es
use
to 
evelop a 
rawing.
The E
it Sheet Format mo
e provi
es the ability to:
" Create or change the title block size an
text hea
ings
" Incorporate a logo
" A


rawing, 
esign or company text, an
Custom Properties
The E
it Sheet mo
e provi
es the ability to:
" A

or mo
ify views
" A

or mo
ify 
imensions
" A

or mo
ify text
Notes can be create
or mo
ifie
in a title block. Notes can also be linke
to
Soli
Works Properties an
Custom Properties. A
inke
notes reflect information
in a title block such as file name, sheet name an
sheet number.
PAGE 1 34
Drawing and Detailing with SolidWorks 2001/2001Plus Drawing Template and Sheet Format
Edit Sheet Format  Title block.
55) Edit company name. Right click Edit Sheet Format from the
Pop up menu in the Graphics window.
56) View the right side of the title block. Click Zoom to
Area on the Sheet Format title block.
Double click the D&M Engineering text. Enter a new
company name if desired. Change the font height to fit your company name inside
title block if required.
57) Right click Properties on the selected text. Uncheck the Use Drawing font check
box from the Note PropertyManager. Change the font size. Click the Font button.
Click OK. The text is displayed in the title block.
58) For SolidWorks2001Plus: Click the Font button in the Text Format box to access the
Property Manager on the left side of the Graphics window.
Soli
Works 2001 Soli
Works 2001Plus
PAGE 1 35
Drawing Template and Sheet Format Drawing and Detailing with SolidWorks 2001/2001Plus
A company logo is normally locate
in the title block. Create a company logo by
copying a picture file from Microsoft ClipArt using Microsoft Wor
. Copy/Paste
the logo into the title block
The following logo example was create
in Microsoft Wor
2000 using the
COMPASS.wmf an
Wor
Art text. Any ClipArt picture, scanne
image or
bitmap can be use
.
Create a logo.
59) Create a New Microsoft Word Document. Click New from the Standard toolbar in
MS Word. Click ClipArt from the Draw toolbar.
ClipArt
60) Drag the COMPASS.wmf file in the WORD document. The
COMPASS.wmf picture file is displayed in the WORD
document.
61) Copy the picture. Select
the compass picture.
Click Copy .
62) The logo is placed into the
Clipboard. The logo is
used again to create an
A size Drawing Template.
Save the logo. Click Save.
Enter Logo for the WORD
filename.
63) Place the logo into the title block. Click a position to the left of the company name in
the title block.
64) Click Edit, Paste. Size the logo to the SolidWorks title
block by dragging the picture handles.
65) Close Microsoft Word. Click File, Exit.
A
ink notes in the title block to the Soli
Works Properties. The 
rawing TITA
E
text 
escribes the 
rawing. Create a note for the title of the 
rawing that is linke

to the Soli
Works file name. Complete the 
rawing. Create a

itional notes.
PAGE 1 36
Drawing and Detailing with SolidWorks 2001/2001Plus Drawing Template and Sheet Format
Create a new Layer for the Title Block notes.
66) Click the Layer Property Manager. Click the New button. Enter TB Text for Name.
Enter TITLE BLOCK TEXT for Description. Click OK. Note: The larger arrow next to
TB TEXT indicates the current layer.
Create a Linked Note.
67) Click Zoom to Area on the TITLE section of the title block. Display the
Annoations toolbar. Click View, Toolbars, Annotations. Click a start point to the
lower right the TITLE text. Click Note from the Annotations toolbar.
68) The Note Property
dialog box is
displayed. Click No
leaders in the
Leader text box.
Click Link to
Property from
the Text Format box.
The Link to Property
dialog box is
displayed. Click No
leaders in the
Leader text box.
Select SW-
FileName from the
2001 2001Plus
drop down list. The
variable
$PRP SW File Name is displayed in the Note text box. Click OK.
PAGE 1 37
Drawing Template and Sheet Format Drawing and Detailing with SolidWorks 2001/2001Plus
69) Uncheck the Use document s font. Click the Font button. Enter 6mm for text
height. Click OK. Draw1 is the current file name.
Note: The $PRP SW-File
Name property will up
ate to
contain the part filename.
Example: Insert the part TUBE
into a Drawing Template in
Project 2. The text TUBE will
replace the SW-FileName.
A

itional notes are require
in the title block. The text box hea
ings: SIZE C,
DWG. NO., REV., SCAA
E, WEIGHT an
SHEET 1 OF 1 are entere
in the
Soli
Works 
efault Sheet Format. SIZE, SHEET an
SCAA
E text will be create

with A
inke
Properties. Change the Sheet Scale. The new value up
ates in the
title block. A

a new sheet. The 
rawing an
the SHEET text values increment.
70) Create a Linked Property to the SIZE text. Click a start point in the upper left hand
corner below the SIZE text. Click Note from the Annotations toolbar. Click Link
to Property from the Text Format box. Select SW-Sheet Format
Size from the drop down list. Click OK. The variable $PRP SW Sheet
Format Size is displayed in the Note text box. Click No leaders. Display
the Sheet Format Size. Click OK.
71) Click the OF text in the lower right corner of the title block. Press the Delete key.
PAGE 1 38
Drawing and Detailing with SolidWorks 2001/2001Plus Drawing Template and Sheet Format
72) Combine Link Properties for the SHEET text. Click a start point in the upper left
hand corner below the SHEET text. Click Note from the Annotations toolbar.
Click No leaders. Click Link to Property from the Text Format box. Select
SW-Current Sheet from the drop down list. Click OK. Enter the text OF. Click Link
to Property from the Text
Format box. Select SW-Total
Sheets from the drop down list.
The variable $PRP SW Sheet
Format Size is displayed in the
Note text box. Display the
Sheet Format Size. Click OK. The Current Sheet value and Total Sheets value
change as additional sheets are added to the drawing.
73) Create a Linked Property to SCALE. Click a start point in the upper left hand corner
below the SCALE text. Click Note from the Annotations toolbar. Click Link to
Property from the Text
Format box. Select SW-Sheet
Scale from the drop down list.
Click OK. The variable $PRP
 SW Sheet Scale is displayed
in the Note text box. Click OK.
The Sheet Scale value changes to reflect the sheet scale properties in the drawing.
Your company has a policy that a contract number must be
containe
in the title block for all associate

rawings in a
project. Create a Custom Property name
CONTRACT
NUMBER. A

it to the 
rawing title block. The Custom Property is containe

in the Sheet Format.
74) Create a Custom Property for the CONTRACT NUMBER text. Click a start point in
the upper left hand corner below the CONTRACT NUMBER text. Click Note
from the Annotations toolbar. Click No leaders. Click Link to Property from
the Text Format box.
75) Select the File Properties button.
Click the Custom tab. Enter the
CONTRACT NUMBER for
Name. Text is the default type.
Click 101045-PAP for Value.
Click Add. The Custom Property
is displayed in the Properties text
box. Click OK.
PAGE 1 39
Drawing Template and Sheet Format Drawing and Detailing with SolidWorks 2001/2001Plus
76) Enter the
CONTRACT
NUMBER in
the Property
Name text
box. Click
OK.
77) The Note text
box displays: $PRP:
 CONTRACT NUMBER .
Display 101045 PAP. Click OK.
78) Fit the drawing to the Graphics window. Press the f key.
Conserve 
rawing
time. Place general
notes which are
commonly use
on a

rawing in the Sheet
Format. The
Engineering 
epartment stores general notes in a Notepa
file,
GENERAA
NOTES.TXT. General notes are usually locate
in a corner of a

rawing.
79) Create general notes from a text file. Double click on the Notepad file,
GENERALNOTES.TXT. Highlight all text. Click Edit, Select All. Copy the text into
the windows clipboard. Click Ctrl C.
80) Click a start point in the lower
left hand corner of the title block.
Click Note from the
Annotations toolbar. Click
inside the Note text box. Paste
the three lines of text. Click
Ctrl V.
81) Display the general notes on the
drawing. Click OK.
PAGE 1 40
Drawing and Detailing with SolidWorks 2001/2001Plus Drawing Template and Sheet Format
82) Return to the drawing sheet. Right click in the
Graphics window. Click Edit Sheet. The
drawing boarder is displayed in gray.
83) Fit the drawing to the Graphics window. Press
the f key.
84) Click None from the Layer text box.
Note: Save your Sheet Format and Drawing
Templates in the Edit Sheet mode. Views are
displayed when inserted into the drawing. Views cannot be displayed in the Edit Sheet
Format mode. The None option is set for Layer and saved with the Drawing Template.
Save the Sheet Format.
85) Click File, Save
Sheet Format.
Select the Custom
Sheet Format
button. Click the
Browse button.
Select the C-
FORMAT.slddrt
sheet format from
the 2001drwparts
file folder. Click
OK.
Note: The Sheet Format1 icon is 
isplaye
in the
FeatureManager. Delete the Sheet Format1 icon
before saving the Drawing Template. The Sheet
Format option is 
isplaye
when the New Drawing
Template is selecte
.
For 2001 Plus: Press Ctrl Q to 
isplay the Sheet
Format1 icon in the FeatureManager.
PAGE 1 41
Drawing Template and Sheet Format Drawing and Detailing with SolidWorks 2001/2001Plus
Create a new Drawing Template: C-ANSI-MM. Combine the Sheet Format an

the empty Drawing Template.
Save the new Drawing template.
86) Click File,
SaveAs.
Select
Drawing
Templates
for Save as
type. Browse
the
2001drwparts
file folder.
Enter
C-ANSI-MM.
87) Close all
documents.
Click
Windows, Close All.
88) Click No to the questions:  Save DRAW1 and Save DRAW2.
89) Verify the template. Click New. Click the 2001drwparts tab. Click the C-ANSI-MM
template. Click OK.
C-SIZE-
C-ANSI-MM
ANSI-MM-
EMPTY
General Notes
PAGE 1 42
Drawing and Detailing with SolidWorks 2001/2001Plus Drawing Template and Sheet Format
A - Size Drawing Template
Create an A size Drawing Template an
an A size Sheet Format. Text size for an
A-size 
rawing is the same as a C-size 
rawing. Create the A-size Drawing
Template. Utilize the empty C-size Drawing Template. Create an A-ANSI-MM
Drawing Template. A

an A-size Sheet Format.
Create a new A size drawing template.
90) Create a new Drawing
Template from an existing
Drawing Template. Click
New. Select C-SIZE-ANSI-
MM-EMPTY. Click No Sheet Format. Select A-Landscape for Paper size. Click
OK. Note: The Document Properties set for the C Size Drawing Template are copied
to the A size Drawing Template.
91) Fit the template to the Graphics window. Press the f key.
92) Save the A size Drawing Template. Click File, Save As. Select Drawing Templates
for Save as type. Browse to the 2001drwparts file folder. Enter
A-SIZE-ANSI-MM-EMPTY. Click the Save button.
Load the Custom A size sheet format.
93) Right click in the Graphics
window. Click Properties.
Click Custom for the Sheet
Format. Browse and select
A-FORMAT.slddrt from the
2001drwparts file folder.
Click OK.
Note: The A-FORMAT is create

in inches. The A-SIZE-ANSI-
MM-EMPTY Drawing Template
is create
in millimeters. The
Drawing Template controls the
units.
PAGE 1 43
Drawing Template and Sheet Format Drawing and Detailing with SolidWorks 2001/2001Plus
The A-FORMAT geometry, text an

imensions are create
on separate layers.
The None option is the current A
ayer. A-FORMAT is 
isplaye
in E
it Sheet
mo
e.
Create a new Drawing Template: A-ANSI-MM. Combine the Sheet Format an

the empty Drawing Template.
Save the new Drawing template.
94) Click File, SaveAs. Select
Drawing
Templates(*.drwdot) for
Save as type. Browse the
2001drwparts file folder.
Enter A-ANSI-MM.
95) Close all documents. Click
Windows, Close All.
96) Verify the template. Click
New. Click the
2001drwparts tab. Click the
A-ANSI-MM template. Click OK.
A-SIZE-
A-ANSI-MM
ANSI-MM-
EMPTY
The A-ANSI-MM an
C-ANSI-MM Drawing Templates an
A-FORMAT an

C-FORMAT Sheet Formats are use in the next Project. Create Drawing
Templates for inch Document Properties in the Exercises at the en
of this Project.
Import other Sheet Formats into Soli
Works.
PAGE 1 44
Drawing and Detailing with SolidWorks 2001/2001Plus Drawing Template and Sheet Format
Questions
1. Name the 
rawing options that are 
efine
in the Drawing Template.
2. Name five 
rawing items that are containe
in the Sheet Format.
3. I
entify the paper 
imensions for an A-size horizontal 
rawing.
4. I
entify the paper 
imensions for an A4 horizontal 
rawing.
5. The Soli
Works format A
an
scape correspon
s to a______________ 
rawing
format an
Portrait correspon
s to a_____________________ 
rawing format.
6. What Paper Size option 
o you select in or
er to 
efine a custom paper wi
th an

height?
7. I
entify the primary type of projection utilize
on a 
rawing in the Unite
States.
8. Describe the steps to 
isplay an
mo
ify the properties on a 
rawing sheet.
9. I
entify the location of the store
System Options.
10. Name the three 
isplay mo
es for 
rawing views using Soli
Works 2001. Name
the four 
isplay mo
es for 
rawing views using Soli
Works 2001Plus.
11. True or False. Soli
Works A
ine Font Types 
efine all ASME Y14.2 type an

style of lines.
12. I
entify all Dimensioning stan
ar
s options supporte
by Soli
Works.
13. I
entify 10 
rawing items that are containe
in a title block.
14. Soli
Works Properties are save
with the __________________ Format.
PAGE 1 45
Drawing Template and Sheet Format Drawing and Detailing with SolidWorks 2001/2001Plus
Exercises
Create Drawing Templates for both inch units an
Metric units. ASME Y14.5M
has 
ifferent rules for Metric an
English unit 
ecimal 
isplay.
English 
ecimal 
isplay:
A 
imension value is less than 1 inch. No lea
ing zero is 
isplaye
before the

ecimal point. See Table 1 for 
etails.
Metric 
ecimal 
isplay:
A 
imension value is less than 1mm. A lea
ing zero is 
isplaye
before the

ecimal point. See Table 1 for 
etails.
General Tolerances are specifie
in the Title Block. Specify tolerances are applie

to an in
ivi
ual 
imension. A 
imension is 
isplaye
to the same number of

ecimal places as its tolerance for inch Unilateral Tolerance. Select ANSI for the
Soli
Works Dimensioning Stan
ar
. Select inch or metric for Drawing units.
TABLE 1
TOLERANCE DISPLAY FOR INCH AND METRIC
DIMENSIONS (ASME Y14.5M)
DISPLAY INCH METRIC
Dimensions less than 1 .5 0.5
Unilateral Tolerance
Bilateral Tolerance
A
imit Tolerance
PAGE 1 46
Drawing and Detailing with SolidWorks 2001/2001Plus Drawing Template and Sheet Format
Exercise 1.1:
a) Create an A-size ANSI Drawing Template using inch units. Use an
A-FORMAT Sheet Format.
b) Create a C-size ANSI Drawing Template using inch units. Use a
C-FORMAT Sheet Format.
The ASME Y14.2M, Minimum letter height for Title Block is as
shown in Table 2.
c) Create three New A
ayers name
DETAIA
S, HIDE DIMS an
CNST
DIMS (Construction Dimensions). Create New A
ayers to 
isplay
CHAIN, PHANTOM an
STITCH lines.
TABLE 2
MINIMUM LETTER HEIGHT FOR TITLE BLOCK
(ASME Y14.2M)
Title Block Text A
etter Height (inches)
for A, B, C Drawing
Size
Drawing Title, Drawing Size, Cage .12
Co
e, Drawing Number, Revision
A
etter
Section an
view letters .24
Drawing block letters .10
All other characters .10
PAGE 1 47
Drawing Template and Sheet Format Drawing and Detailing with SolidWorks 2001/2001Plus
Exercise 1.2:
Create an A4(horizontal) ISO Drawing Template. Use Document
Properties to set the ISO 
imension stan
ar
an
millimeter units.
Exercise 1.3:
Mo
ify the Soli
Works Drawing Template A4-ISO. E
it Sheet Format to
inclu
e a new Sheet Metal & Wel
ment Tolerances box on the left han

si
e of the Sheet Format, Figure EX1.3.
Display sketche
en
points to create new lines for the Tolerance box.
Click Tools, Options, System Options, Sketch. Check Display entity
points. The en
points are 
isplaye
for Sketch lines.
Figure EX1.3
SHEET METAL & WELDMENT TOLERANCES box courtesy of Ismeca, USA Inc. Vista, CA.
PAGE 1 48
Drawing and Detailing with SolidWorks 2001/2001Plus Drawing Template and Sheet Format
Exercise 1.4:
Your company uses Soli
Works an
Pro/ENGINEER to
manufacture Sheet Metal parts, Figure EX1.4. Import the empty
A-size 
rawing format, FORMAT-A-PRO-E.DWG locate
in the
2001
rwparts file fol
er. This 
ocument was exporte
from Pro/E
as a DWG file. Save the PRO/E 
rawing format as a Soli
Works
Sheet Format.
Figure EX1.4
Sheet Metal Strong Tie Reinforcing Bracket, courtesy of Simpson Strong Tie Corporation, CA, USA.
PAGE 1 49
Drawing Template and Sheet Format Drawing and Detailing with SolidWorks 2001/2001Plus
Exercise 1.5:
You require AutoCAD to perform Exercise 1.5. Your company uses
Soli
Works an
AutoCAD. Open an A-size 
rawing template from
AutoCAD. Review the Dimension Variables (DIMVARS) in
AutoCAD. Recor
the DIMSTATUS for the following variables:
DIMTXSTY Dimensioning Text Style
DIMASZ Arrow size
DIMCEN Center Mark size
DIMDEC Decimal Places
DIMTDEC Tolerance Decimal Places
DIMTXT Text Height
DIMDA
I Space between 
imension lines for Baseline

imensioning
I
entify the correspon
ing values in Soli
Works Document Properties
to contain the AutoCAD 
imension variables.
For 2001Plus: Favorite 
imension style settings are 
efine
for a
particular 
imension. Favorite 
imension styles are applie
to other

imensions on the 
rawing, part an
assembly 
ocuments. The styles
are accesse
through the Dimension PropertyManager.
Note: Early AutoCAD 
rawing formats contain fonts not supporte
in
a Win
ows NT/2000 environment. These fonts importe
into
Soli
Works will be misaligne
in the Sheet Format. Mo
ify ol
er
AutoCAD formats to a True Type Font in Soli
Works.
PAGE 1 50


Wyszukiwarka

Podobne podstrony:
[Tutorial] How to Draw Manga Folds and Clothing
E Book Art Anime How To Draw Iria
How to Debate Leftists and Win In Their Own Game Travis L Hughes
Tutorial How To Draw Eyes
How To Draw Comic Human
How To Draw Cartoon Faces Anime
[Tutorial] How to draw Manga Rei Ayanami (Neon Genesis Evange

więcej podobnych podstron