MySQL Reference Manual for version 3.23.39. - 10 MySQL Server Functions
code {color:purple} tt {color:green} samp {color:navy} pre {color:maroon}
Go to the first, previous, next, last section, table of contents.
10 MySQL Server Functions
This chapter describes the languages MySQL supports, how sorting
works in MySQL, and how to add new character sets to MySQL.
You will also find information about maximum table sizes in this chapter.
10.1 What Languages Are Supported by MySQL?
mysqld can issue error messages in the following languages:
Czech, Danish, Dutch, English (the default), Estonian, French, German, Greek,
Hungarian, Italian, Japanese, Korean, Norwegian, Norwegian-ny, Polish,
Portuguese, Romanian, Russian, Slovak, Spanish, and Swedish.
To start mysqld with a particular language, use either the
--language=lang or -L lang options. For example:
shell> mysqld --language=swedish
or:
shell> mysqld --language=/usr/local/share/swedish
Note that all language names are specified in lowercase.
The language files are located (by default) in
`mysql_base_dir/share/LANGUAGE/'.
To update the error message file, you should edit the `errmsg.txt' file
and execute the following command to generate the `errmsg.sys' file:
shell> comp_err errmsg.txt errmsg.sys
If you upgrade to a newer version of MySQL, remember to repeat
your changes with the new `errmsg.txt' file.
10.1.1 The Character Set Used for Data and Sorting
By default, MySQL uses the ISO-8859-1 (Latin1) character
set. This is the character set used in the USA and western Europe.
All standard MySQL binaries are compiled with
--with-extra-charsets=complex. This will add code to all
standard programs to be able to handle latin1 and all multi-byte
character sets within the binary. Other character sets will be
loaded from a character-set definition file when needed.
The character set determines what characters are allowed in names and how
things are sorted by the ORDER BY and GROUP BY clauses of
the SELECT statement.
You can change the character set with the
--default-character-set option when you start the server.
The character sets available depend on the --with-charset=charset
option to configure, and the character set configuration files
listed in `SHAREDIR/charsets/Index'.
See section 4.7.1 Quick Installation Overview.
If you change the character set when running MySQL (which may
also change the sort order), you must run myisamchk -r -q on all
tables. Otherwise your indexes may not be ordered correctly.
When a client connects to a MySQL server, the server sends the
default character set in use to the client. The client will switch to
use this character set for this connection.
One should use mysql_real_escape_string() when escaping strings
for a SQL query. mysql_real_escape_string() is identical to the
old mysql_escape_string() function, except that it takes the MYSQL
connection handle as the first parameter.
If the client is compiled with different paths than where the server is
installed and the user who configured MySQL didn't included all
character sets in the MySQL binary, one must specify for
the client where it can find the additional character sets it will need
if the server runs with a different character set than the client.
One can specify this by putting in a MySQL option file:
[client]
character-sets-dir=/usr/local/mysql/share/mysql/charsets
where the path points to where the dynamic MySQL character sets
are stored.
One can force the client to use specific character set by specifying:
[client]
default-character-set=character-set-name
but normally this is never needed.
10.1.2 Adding a New Character Set
To add another character set to MySQL, use the following procedure.
Decide if the set is simple or complex. If the character set
does not need to use special string collating routines for
sorting and does not need multi-byte character support, it is
simple. If it needs either of those features, it is complex.
For example, latin1 and danish are simple charactersets while
big5 or czech are complex character sets.
In the following section, we have assumed that you name your character
set MYSET.
For a simple character set do the following:
Add MYSET to the end of the `sql/share/charsets/Index' file
Assign an unique number to it.
Create the file `sql/share/charsets/MYSET.conf'.
(You can use `sql/share/charsets/latin1.conf' as a base for this).
The syntax for the file very simple:
Comments start with a '#' character and proceed to the end of the line.
Words are separated by arbitrary amounts of whitespace.
When defining the character set, every word must be a number in hexadecimal
format
The ctype array takes up the first 257 words. The
to_lower, to_upper and sort_order arrays take up
256 words each after that.
See section 10.1.3 The character definition arrays.
Add the character set name to the CHARSETS_AVAILABLE and
COMPILED_CHARSETS lists in configure.in.
Reconfigure, recompile, and test.
For a complex character set do the following:
Create the file `strings/ctype-MYSET.c' in the MySQL source
distribution.
Add MYSET to the end of the `sql/share/charsets/Index' file.
Assign an unique number to it.
Look at one of the existing `ctype-*.c' files to see what needs to
be defined, for example `strings/ctype-big5.c'. Note that the
arrays in your file must have names like ctype_MYSET,
to_lower_MYSET, and so on. This corresponds to the arrays
in the simple character set. See section 10.1.3 The character definition arrays. For a complex
character set
Near the top of the file, place a special comment like this:
/*
* This comment is parsed by configure to create ctype.c,
* so don't change it unless you know what you are doing.
*
* .configure. number_MYSET=MYNUMBER
* .configure. strxfrm_multiply_MYSET=N
* .configure. mbmaxlen_MYSET=N
*/
The configure program uses this comment to include
the character set into the MySQL library automatically.
The strxfrm_multiply and mbmaxlen lines will be explained in
the following sections. Only include them if you the string
collating functions or the multi-byte character set functions,
respectively.
You should then create some of the following functions:
my_strncoll_MYSET()
my_strcoll_MYSET()
my_strxfrm_MYSET()
my_like_range_MYSET()
See section 10.1.4 String Collating Support.
Add the character set name to the CHARSETS_AVAILABLE and
COMPILED_CHARSETS lists in configure.in.
Reconfigure, recompile, and test.
The file `sql/share/charsets/README' includes some more instructions.
If you want to have the character set included in the MySQL
distribution, mail a patch to internals@lists.mysql.com.
10.1.3 The character definition arrays
to_lower[] and to_upper[] are simple arrays that hold the
lowercase and uppercase characters corresponding to each member of the
character set. For example:
to_lower['A'] should contain 'a'
to_upper['a'] should contain 'A'
sort_order[] is a map indicating how characters should be ordered for
comparison and sorting purposes. For many character sets, this is the same as
to_upper[] (which means sorting will be case insensitive).
MySQL will sort characters based on the value of
sort_order[character]. For more complicated sorting rules, see
the discussion of string collating below. See section 10.1.4 String Collating Support.
ctype[] is an array of bit values, with one element for one character.
(Note that to_lower[], to_upper[], and sort_order[]
are indexed by character value, but ctype[] is indexed by character
value + 1. This is an old legacy to be able to handle EOF.)
You can find the following bitmask definitions in `m_ctype.h':
#define _U 01 /* Uppercase */
#define _L 02 /* Lowercase */
#define _N 04 /* Numeral (digit) */
#define _S 010 /* Spacing character */
#define _P 020 /* Punctuation */
#define _C 040 /* Control character */
#define _B 0100 /* Blank */
#define _X 0200 /* heXadecimal digit */
The ctype[] entry for each character should be the union of the
applicable bitmask values that describe the character. For example,
'A' is an uppercase character (_U) as well as a
hexadecimal digit (_X), so ctype['A'+1] should contain the
value:
_U + _X = 01 + 0200 = 0201
10.1.4 String Collating Support
If the sorting rules for your language are too complex to be handled
with the simple sort_order[] table, you need to use the string
collating functions.
Right now the best documentation on this is the character sets that are
already implemented. Look at the big5, czech, gbk, sjis, and tis160
character sets for examples.
You must specify the strxfrm_multiply_MYSET=N value in the
special comment at the top of the file. N should be set to
the maximum ratio the strings may grow during my_strxfrm_MYSET (it
must be a positive integer).
10.1.5 Multi-byte Character Support
If your want to add support for a new character set that includes
multi-byte characters, you need to use the multi-byte character
functions.
Right now the best documentation on this is the character sets that are
already implemented. Look at the euc_kr, gb2312, gbk, sjis and ujis
character sets for examples. These are implemented in the
ctype-'charset'.c files in the `strings' directory.
You must specify the mbmaxlen_MYSET=N value in the special
comment at the top of the source file. N should be set to the
size in bytes of the largest character in the set.
10.2 How Big MySQL Tables Can Be
MySQL Version 3.22 has a 4G limit on table size. With the new
MyISAM in MySQL Version 3.23 the maximum table size is
pushed up to 8 million terabytes (2 ^ 63 bytes).
Note, however, that operating systems have their own file size
limits. Here are some examples:
Operating System File Size Limit
Linux-Intel 32 bit 2G, 4G or more, depends on Linux version
Linux-Alpha 8T (?)
Solaris 2.5.1 2G (possible 4G with patch)
Solaris 2.6 4G
Solaris 2.7 Intel 4G
Solaris 2.7 ULTRA-SPARC 8T (?)
On Linux 2.2 you can get bigger tables than 2G by using the LFS patch for
the ext2 file system. On Linux 2.4 there exists also patches for ReiserFS
to get support for big files.
This means that the table size for MySQL is normally limited by
the operating system.
By default, MySQL tables have a maximum size of about 4G. You can
check the maximum table size for a table with the SHOW TABLE STATUS
command or with the myisamchk -dv table_name.
See section 7.28 SHOW Syntax.
If you need bigger tables than 4G (and your operating system supports
this), you should set the AVG_ROW_LENGTH and MAX_ROWS
parameter when you create your table. See section 7.7 CREATE TABLE Syntax. You can
also set these later with ALTER TABLE. See section 7.8 ALTER TABLE Syntax.
If your big table is going to be read-only, you could use
myisampack to merge and compress many tables to one.
myisampack usually compresses a table by at least 50%, so you can
have, in effect, much bigger tables. See section 15.12 The MySQL Compressed Read-only Table Generator.
You can go around the operating system file limit for MyISAM data
files by using the RAID option. See section 7.7 CREATE TABLE Syntax.
Another solution can be the included MERGE library, which allows you to
handle a collection of identical tables as one. See section 8.2 MERGE Tables.
Go to the first, previous, next, last section, table of contents.
Wyszukiwarka
Podobne podstrony:
manual ServerIdeal List Server Instuction ManualWindows 8 Manual KMS Activation ( Recommended) KMS SERVERSAquarium Aquaristik Amtra Manual Phosphatreductewm2000 service manualIZH 53 ManualFax Servermanual performance 4ewpqgkkdcabjur6zp7uvdqa7kxjupvngosc6aaBazydanych Manualmanual Privilege systemmanual?ding functionsMedycyna manualna Wprowadzenie do teorii, rozpoznawanie i leczenieCwiczenie z Windows Server 2008 wysoka dostepnoscManual Smart2go PLmanual ODBCManual Nokia BH 501 PLManuales Reparacion de PCs Modulo2więcej podobnych podstron