SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
PETROL
PEUGEOT 306 98 DIESEL
MAKE MOD. YEAR
X
ALARM/SIREN Position the compact alarms and the sirens in the engine compartment, between the
battery and the driver s side headlamps. To pass the cables use the original rubber
POSITION
sleeve located under the driver s side wheelhouse.
POWER SUPPLY + 30: connect to the wire located in a multiway connector directly in the fuse box.
- 31: connect with a cable terminal to one of the original ground bolts located behind
the left lateral panel, driver s side.
IGNITION WIRE + 15/54: connect to the YELLOW wire marked CC2 located in a multiway connector in
the fuse box.
DIRECTION INDICATORS Connect to the RED wire marked nr. 2330 at the position A4 and to the GREEN wire
marked nr. 2340 at the position A2 located in the wiring harness coming out of the 9
way black connector under the steering column.
ELECTRIC WINDOWS Positive control signal
Front window, driver s side:
cut the 2 mm2 wire nr. 604 located in the wiring harness coming out of the switch of the
respective window.
Front window, passenger s side:
cut the 2 mm2 wire nr. 606 located in the wiring harness coming out of the respective
window.
CENTRAL DOORS LOCKING Negative control signal
Connect to the 0,5 mm2 RED or BLUE wire marked nr. 627 at the position nr. 6 (unlock)
and to the WHITE wire marked nr. 628 at the position nr. 7 (lock) located in the wiring
harness coming out of the 13 way blue connector on the right of the left lateral panel,
driver s side.
2nd possibility
Connect to the 0,5 mm2 YELLOW wire marked nr. 627 at the position B6 (unlock) and
to the WHITE wire marked nr. 628 at the position B8 located in the wiring harness
coming out of the 13 way white connector, behind the fuse box.
IMMOBILISATION POINT Gasoil pump
Cut the RED wire located in the 4 way black connector, in the electrovalve in the engine
compartment.
BONNET SWITCH Install an additional switch on the headlamp support plate, in correspondence with the
driver s side headlamp.
DOORS SWITCH Connect to the GREEN wire marked nr. 30 or nr. 304 located in the wiring harness
coming out of the central doors locking unit, alternatively connect to the WHITE wire
marked nr. 300 or nr. 304 at the position 2B in the wiring harness coming out of the 13
way white connector, in the fuse box.
BOOT SWITCH Connect to the 1 mm2 LIGHT BLUE wire located in the wiring harness coming out of the
2 way connector directly in the boot lamp.
pe30698gbd.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
Wyszukiwarka
Podobne podstrony:
Blaupunkt CR5WH Alarm Clock Radio instrukcja EN i PLParty Alarm Apres Ski (3 CD) (28 12 2014) TracklistaInstrukcja obsługi alarm Logic CAN LC 5 wyd 1 (2)alarmAuto alarm Digital Tytan DS200 instr obslugiAlarm Do WyboruAquagen Party Alarmfunction mcal event set alarmzone alarmAlarm gsmInstrukcja obsługi alarm Logic CAN LC4ALARM TYTAN DS400 C Lista modeli samochodowalarmwięcej podobnych podstron