HP System Management Homepage
Installation Guide
HP-UX, Linux and Windows Systems
HP Part Number: 438862-009
Published: March 2008
Edition: 16
© Copyright 2004 - 2008 Hewlett-Packard Development Company, L.P.
Legal Notices
Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial
Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under
vendor's standard commercial license.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP
shall not be liable for technical or editorial errors or omissions contained herein.
Trademark Notices
AMD® and Opteron® are trademarks of Advanced Micro Devices, Inc.
Adobe and Acrobat are trademarks of Adobe Systems Incorporated.
HP-UX Release 10.20 and later and HP-UX Release 11.00 and later (in both 32 and 64-bit configurations) on all HP 9000 computers are Open
Group UNIX 95 branded products.
Intel and Itanium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation.
Red Hat® is a registered trademark of Red Hat, Inc. in the United States and other countries.
SUSE® is a registered trademark of SUSE Linux AG.
UNIX is a registered trademark of The Open Group.
Table of Contents
About this document..........................................................................................................5
Intended audience..................................................................................................................................5
New and changed information in this edition.......................................................................................5
Typographic conventions.......................................................................................................................5
Document organization..........................................................................................................................5
Related information................................................................................................................................6
HP SMH documentation...................................................................................................................6
Related documentation ....................................................................................................................7
Publishing history...................................................................................................................................7
HP encourages your comments..............................................................................................................8
1 Product overview.............................................................................................................9
Product features......................................................................................................................................9
2 Installation requirements..............................................................................................11
Supported operating systems...............................................................................................................11
Supported browsers..............................................................................................................................12
RPMs supported on the x86 platform...................................................................................................13
RPMs supported on the AMD64 and EM64T platform........................................................................13
RPMs supported on the Itanium platform...........................................................................................14
Verifying system requirements.............................................................................................................15
Obtaining the HP SMH software..........................................................................................................15
HP media.........................................................................................................................................15
HP web sites....................................................................................................................................15
3 Initial setup....................................................................................................................17
Installation information........................................................................................................................17
4 Installing on HP-UX.......................................................................................................19
System Administration Management Tool changes: SAM and HP SMH............................................19
Installing on HP-UX..............................................................................................................................19
Installation requirements......................................................................................................................20
Installing HP SMH and dependent applications..................................................................................20
Using the Applications media..............................................................................................................22
Using Software Depot...........................................................................................................................22
Configuring HP SMH...........................................................................................................................23
Configuring the startup mode.........................................................................................................24
Patching or updating the software........................................................................................................25
5 Installing on Windows.................................................................................................27
Installing HP SMH in-place on Windows............................................................................................27
Installing HP SMH for Windows silently.............................................................................................30
Generating a setup.iss file................................................................................................................31
Installing silently using the CLI......................................................................................................31
Reinstalling silently using the CLI..................................................................................................31
Configuring HP SMH...........................................................................................................................32
Table of Contents 3
6 Installing HP SMH using the ProLiant Remote Deployment Utility...........................33
Installing remotely on Windows using ProLiant Remote Deployment Utility....................................34
7 Installing HP SMH using the HP Smart-Update Manager (HPSUM)......................37
Installing HP SMH remotely on Windows using HP Smart-Update Manager (HPSUM)...................38
To preconfigure the HP SMH component:...........................................................................................38
8 Installing in-place on Linux..........................................................................................43
Installation for Linux on x86 and x86_64..............................................................................................43
Installing HP SMH on Linux x86 systems.......................................................................................43
Installing HP SMH on x86_64..........................................................................................................43
Configuring HP SMH...........................................................................................................................43
9 Installing directly on Linux...........................................................................................51
Installing in-place on Linux Itanium....................................................................................................51
Installation for Linux Itanium.........................................................................................................51
Installing HP SMH on Linux Itanium systems...............................................................................51
Configuring HP SMH...........................................................................................................................51
10 Installing in-place on Linux using Linux Deployment Utility...................................57
Installing HP SMH with preconfiguration...........................................................................................57
Preconfiguring the HP SMH component........................................................................................57
Installing HP SMH as a single component......................................................................................58
Installing HP SMH without preconfiguration......................................................................................59
11 Initializing the software for the first time..................................................................61
Key and certificate information............................................................................................................61
12 Logging in and logging out of HP SMH..................................................................63
Logging in with Windows XP...............................................................................................................63
Logging in with Internet Explorer........................................................................................................63
Logging in with Mozilla and Firefox....................................................................................................65
Logging in from the HP-UX command line.........................................................................................65
Logging out...........................................................................................................................................65
13 Uninstalling HP SMH.................................................................................................67
Uninstalling from an HP-UX system....................................................................................................67
Uninstalling from a Linux Itanium, x86 or x86_64 system...................................................................67
Uninstalling from a Windows system..................................................................................................67
Uninstalling from multiple Windows systems silently........................................................................67
Uninstalling manually for Windows and Linux systems.....................................................................68
Uninstalling manually for HP-UX systems..........................................................................................69
Index.................................................................................................................................71
4 Table of Contents
About this document
Intended audience
The HP System Management Homepage (HP SMH) is a web-based interface that consolidates
and simplifies single system management for HP servers on HP-UX, Linux, andMicrosoft®
Windows® operating systems. This installation guide is for system administrators who are
installing HP SMH.
New and changed information in this edition
To review what is new and changed in this release of HP SMH, see the HP System Management
Homepage Release Notes on the HP Technical Documentation web site at http://docs.hp.com.
Typographic conventions
find(1) HP-UX manpage. In this example, find is the manpage name and 1 is
the manpage section.
Book Title Title of a book or other document.
Linked Title Title that is a hyperlink to a book or other document.
http:// A Web site address that is a hyperlink to the site.
www.hp.com
Command Command name or qualified command phrase.
user input Commands and other text that you type.
computer Text displayed by the computer.
output
Enter The name of a keyboard key. Note that Return and Enter both refer to the
same key. A sequence such as Ctrl+A indicates that you must hold down
the key labeled Ctrl while pressing the A key.
term Defined use of an important word or phrase.
variable The name of an environment variable, for examplePATHorerrno.
value A value that you may replace in a command or function, or information in
a display that represents several possible values.
An element used in a markup language.
attrib= An attribute used in a markup language.
Document organization
The install guide is organized as follows:
Chapter 1 Product overview (page 9)
Chapter 2 Installation requirements (page 11)
Chapter 3 Initial setup (page 17)
Chapter 4 Installing on HP-UX (page 19)
Chapter 5 Installing on Windows (page 27)
Chapter 6 Installing HP SMH using the ProLiant Remote Deployment Utility (page 33)
Chapter 7 Installing HP SMH using the HP Smart-Update Manager (HPSUM) (page 37)
Chapter 8 Installing in-place on Linux (page 43)
Chapter 9 Installing directly on Linux (page 51)
Chapter 10 Installing in-place on Linux using Linux Deployment Utility (page 57)
Chapter 11 Initializing the software for the first time (page 61)
Intended audience 5
Chapter 12 Logging in and logging out of HP SMH (page 63)
Chapter 13 Uninstalling HP SMH (page 67)
Related information
This section lists the HP SMH documentation and related HP documentation.
HP SMH documentation
For more information regarding HP SMH, refer to the following sources:
" HP System Management Homepage Release Notes The release notes provide
documentation for what's new with the release, features and change notifications, system
requirements, and known issues. The release notes are available on the HP Technical
Documentation Web site at http://docs.hp.com.
" HP System Management Homepage Help System The help system provides a complete
set of documentation for using, maintaining, and troubleshooting HP SMH. In the HP SMH
application, go to the Help menu.
" HP System Management Homepage Installation Guide The install guide provides
information about installing and getting started using HP SMH. It includes an introduction
to basic concepts, definitions, and functionality associated with HP SMH. The install guide
is available on the HP Technical Documentation web site at http://docs.hp.com. Also, for
Linux and Windows releases, the install guide is available on the Management CD and at
the HP SMH web page at http://h18013.www1.hp.com/products/servers/management/agents/
documentation.html.
" HP System Management Homepage User Guide The user guide provides a complete set
of documentation for using, maintaining, and troubleshooting HP SMH. For Linux and
Windows, this user guide is available under the HP SMH Help menu, and on the HP
Technical Documentation web site at http://docs.hp.com. For HP-UX, we no longer provide
a printed user guide, please refer to the HP SMH online help content for information on
how to use, maintain, and troubleshoot HP SMH.
" Next generation single-system management on HP-UX 11i v2 (B.11.23) A white paper that
introduces HP SMH and its various plug-ins. The use cases involving HP SMH plug-ins
described in this document highlight the features provided by HP SMH. The white paper
is available on the HP Technical Documentation web site at http://docs.hp.com/en/
4AA0-4052ENW/4AA0-4052ENW.pdf.
" hpsmh (1m) manpage For HP-UX releases, the manpage is available from the command
line using theman hpsmhcommand. This information is not available for Linux and
Windows.
" smhstartconfig (1M) manpage For HP-UX releases, the manpage is available from the
command line using theman smhstartconfigcommand. This information is not available
for Linux and Windows.
" sam(1M) manpage For HP-UX releases, the manpage is available from the command line
using the man sam command. This information is not available for Linux and Windows.
Please note the SAM functionality changes in Chapter 4: Installing on HP-UX (page 19).
" smh (1m) manpage This command is available in HP-UX 11i v3 (B.11.31) only. This is an
enhanced version of the sam(1m) command. For HP-UX releases, the manpage is available
from the command line using theman smhcommand. This information is not available for
Linux and Windows.
" HP System Management Homepage web site The web site provides HP SMH information
and product links. Go to the HP web site at http://www.hp.com or to the Software Depot
6
home at http://www.hp.com/go/softwaredepot and search for System Management
Homepage.
" HP ProLiant Essentials software page This web page is at http://www.hp.com/servers/
manage.
Related documentation
For more information relating to HP SMH, refer to the following sources. They are available on
the Instant Information DVD and on the HP Technical Documentation web site at http://
docs.hp.com.
" HP-UX 11i Installation and Update Guides (v1, B.11.11; v2, B.11.23; v3 B.11.31) Provide
instructions on how to install or update to HP-UX.
" HP-UX 11i Release Notes (v1, B.11.11; v2, B.11.23; v3 B.11.31) Describe new features
and functionality changes for HP-UX 11i, including information on HP SMH.
NOTE: For HP-UX release documentation, check for the latest version on http://docs.hp.com.
Publishing history
This section provides the publishing history of the document.
Manufacturing Part Supported Operating Supported Versions Edition Number Publication Date
Number Systems
438862-009 HP-UX HP-UX 11i v3 16 March 2008
(B.11.31), HP-UX 11i
v2 (B.11.23), HP-UX
11i v1 (B.11.11)
438862-008 HP-UX HP-UX 11i v3 15 December 2007
(B.11.31), HP-UX 11i
v2 (B.11.23), HP-UX
11i v1 (B.11.11)
438862-007 Linux and Windows See Installation 14 February 2008
requirements
(page 11).
438862-006 HP-UX HP-UX 11i v3 13 September 2007
(B.11.31), HP-UX 11i
v2 (B.11.23), HP-UX
11i v1 (B.11.11)
438862-005 Linux and Windows See Installation 12 August 2007
requirements
(page 11).
438862-004 Linux and Windows See Installation 11 June 2007
requirements
(page 11).
438862-003 HP-UX HP-UX 11i v2 10 June 2007
(B.11.23), HP-UX 11i
v1 (B.11.11)
438862-002 Linux and Windows See Installation 9 April 2007
requirements
(page 11).
381372-009 HP-UX HP-UX 11i v3 8 February 2007
(B.11.31)
Publishing history 7
Manufacturing Part Supported Operating Supported Versions Edition Number Publication Date
Number Systems
438862-001 Linux and Windows See Installation 7 January 2007
requirements
(page 11).
381372-008 HP-UX HP-UX 11i v2 6 December 2006
(B.11.23), HP-UX 11i
v1 (B.11.11)
381372-007 HP-UX HP-UX 11i v2 5 September 2006
(B.11.23), HP-UX 11i
v1 (B.11.11)
381372-006-en HP-UX, Linux, and For HP-UX: HP-UX 4 June 2006
Windows 11i v2 (B.11.23),
HP-UX 11i v1
(B.11.11). For Linux
and Windows: See
Installation
requirements
(page 11).
381372-005 Linux and Windows See Installation 4 February 2006
requirements
(page 11).
381372-004-en HP-UX HP-UX 11i v2 3 December 2005
(B.11.23), HP-UX 11i
v1 (B.11.11)
381372-002 HP-UX HP-UX 11i v2 2 September 2005
(B.11.23), HP-UX 11i
v1 (B.11.11)
381372-002 HP-UX HP-UX 11i v2 2 May 2005
(B.11.23), HP-UX 11i
v1 (B.11.11)
381372-001 Linux and Windows See Installation 1 November 2004
requirements
(page 11).
HP encourages your comments
HP encourages your comments concerning this document. HP is committed to providing
documentation that meets your needs. Send any errors found, suggestions for improvement, or
compliments to:feedback@fc.hp.com. Include the document title, manufacturing part number,
and any comment, error found, or suggestion for improvement you have concerning this
document.
8
1 Product overview
The HP System Management Homepage (HP SMH) is a web-based interface that consolidates
and simplifies single system management for HP servers running the HP-UX, Linux, and Microsoft
Windows operating systems. HP SMH aggregates and displays data from Web Agents and other
HP Web-enabled System Management Software that includes HP Insight Diagnostics, the Array
Configuration Utility, and the HP Software Version Control Agents.
HP SMH enables IT administrators to view in-depth hardware configuration and status data,
performance metrics, system thresholds, diagnostics, and software version control information
using a single intuitive interface.
Product features
HP SMH provides the following enhanced security and streamlined operations for HP servers
running HP-UX, Linux, and Windows.
" Browser access using operating system-based SSL-secure authentication
" Common HTTP and HTTPS service for HP Insight Management Agents and utilities, for
reduced complexity and system resource requirements
" Simplified architecture for implementing HTTP security and HP management updates
" Greater access control through NIC binding and advanced configuration features for
individual and groups of users
" Broader operating system and browser support
Product features 9
10
2 Installation requirements
This chapter provides requirements for the HP-UX, Linux, and Windows systems to run HP
System Management Homepage (HP SMH):
" Supported operating systems (page 11)
" Supported browsers (page 12)
" RPMs supported on the x86 platform (page 13)
" RPMs supported on the AMD64 and EM64T platform (page 13)
" RPMs supported on the Itanium platform (page 14)
" Verifying system requirements (page 15)
" Obtaining the HP SMH software (page 15)
HP media (page 15)
HP web sites (page 15)
Supported operating systems
HP SMH supports the following operating systems for the HP-UX, Linux, and Windows systems:
" HP-UX 11i v3 (B.11.31) for HP Integrity Servers and HP 9000 Servers
" HP-UX 11i v2 (B.11.23) for HP Integrity Servers and HP 9000 Servers
" HP-UX 11i v1 (B.11.11) for HP Servers and Workstations
" Red Hat Enterprise Linux 5.0 for x86 Update 1
" Red Hat Enterprise Linux 5.0 for AMD64 and Intel EM64T Update 1
" Red Hat Enterprise Linux 5.0 for AMD64 and x86 Update 1
" Red Hat Enterprise Linux 5.0 for Itanium Linux Update 1
" Red Hat Enterprise Linux 5.0 for x86
" Red Hat Enterprise Linux 5.0 for AMD64 and Intel EM64T
" Red Hat Enterprise Linux 5.0 for AMD64 and x86
" Red Hat Enterprise Linux 5.0 for Integrity Linux
" Red Hat Enterprise Linux 4.0 for x86, Update 6
" Red Hat Enterprise Linux 4.0 for AMD64 and EM64T, Update 6
" Red Hat Enterprise Linux 4.0 for AMD64 and x86 Update 6
" Red Hat Enterprise Linux 4.0 for Itanium Linux, Update 6
" Red Hat Enterprise Linux 4.0 for x86, Update 5
" Red Hat Enterprise Linux 4.0 for AMD64 and EM64T, Update 5
" Red Hat Enterprise Linux 4.0 for AMD64 and x86 Update 5
" Red Hat Enterprise Linux 4.0 for Integrity Linux, Update 5
" Red Hat Enterprise Linux 4.0 for x86, Update 4
" Red Hat Enterprise Linux 4.0 for AMD64 and EM64T, Update 4
" Red Hat Enterprise Linux 4.0 for AMD64 and x86 Update 4
" Red Hat Enterprise Linux 4.0 for Integrity Linux, Update 4
" SUSE Linux Enterprise Server 10 for x86
" SUSE Linux Enterprise Server 10 for AMD64 and Intel EM64T
" SUSE Linux Enterprise Server 10 for Itanium Linux
" SUSE Linux Enterprise Server 10 for x86 Service Pack 1
" SUSE Linux Enterprise Server 10 for AMD64 and Intel EM64T Service Pack 1
" SUSE Linux Enterprise Server 10 for Itanium Linux, Service Pack 1
" SUSE Linux Enterprise Server 9 for x86, Service Pack 4
Supported operating systems 11
" SUSE Linux Enterprise Server 9 for AMD64 and Intel EM64T, Service Pack 4
" SUSE Linux Enterprise Server 9 for Itanium Linux, Service Pack 4
" SUSE Linux Enterprise Server 9 for x86, Service Pack 3
" SUSE Linux Enterprise Server 9 for AMD64 and Intel EM64T, Service Pack 3
" SUSE Linux Enterprise Server 9 for Integrity Linux, Service Pack 3
" Novell Open Enterprise Server (OES) with Service Pack 1 or later
" ESX 3.0
" ESX 3.0.1
" ESX 3.0.2
" ESX 3.1
" Microsoft Windows Server 2003 SP2
" Microsoft Windows 2003 R2 Datacenter Edition (DCE)
" Microsoft Windows Server 2003 R2 SBS
" Microsoft Windows Server 2003 Slipstream, Standard Edition
" Microsoft Windows Server 2003 Slipstream, Web Edition RTM
" Microsoft Windows Server 2003 Slipstream, Enterprise Edition RTM
" Microsoft Windows Server 2003 SBS, Standard and Premium
" Microsoft Windows Server 2003 Web Edition
" Microsoft Windows Server 2003, Enterprise Edition for Itanium-based Systems
" Microsoft Windows Server 2003, Datacenter Edition for Itanium-based Systems
" Microsoft Windows XP
" Windows Web Server 2008
" Windows Server 2008 for Itanium-Based Systems
" Microsoft Windows Vista
" XenSource
NOTE: For Linux, the Lightweight Directory Access Protocol (LDAP) is supported on SUSE
Linux Enterprise Server 9.
For Windows, the SmartStart CD requires that all systems have a minimum of 256 MB of RAM.
The HP-UX 11i v1 (B.11.11) Operating Environments are for PA-RISC systems only. The HP-UX
11i v2 (B.11.23) Operating Environments (September 2004 and later) and HP-UX 11i v3 (B.11.31)
Operating Environments (February 2007 and later) support both PA-RISC and Itanium systems.
Supported browsers
This section lists the supported browsers for the HP-UX, Linux, and Windows systems:
For HP-UX Itanium or PA-RISC systems that are connecting to any server type or for HP-UX
servers that display to any desktop via X, you can use the following desktop browsers :
" Mozilla 1.6, 1.7
" Firefox 1.0.2, 1.5, 2.0
For Windows Itanium or x86 systems that are connecting to any server type, you can use the
following desktop browsers:
" Internet Explorer 6.0, 7.0
" Mozilla 1.5, 1.6, 1.7
" Firefox 1.0.2, 1.5, 2.0
For Linux Intel Itanium or x86 systems that are connecting to any server type, you can use the
following desktop browsers:
12 Installation requirements
" Mozilla 1.5, 1.6, 1.7
" Firefox 1.0.2, 1.5, 2.0
NOTE: Installation of HP SMH does not require a browser.
The HP Web-enabled System Management Software is hardware-dependent. For the installation
to complete successfully, your system must support at least 256 colors.
RPMs supported on the x86 platform
HP SMH supports the following Red Hat Package Managers (RPM) for each of the Linux operating
systems on the x86 platform.
Operating system RPM
SUSE Linux Enterprise Server 10 (x86) " glibc 2.3.90 or later
" pam 0.99 or later
" perl 5.8.8 or greater
" zlib 1.2.3 or greater
SUSE Linux Enterprise Server 9 (x86) " glibc 2.3.3-98 or later
" pam 0.77-221 or later
" perl 5.8.0 or greater
" zlib 1.2.1 or greater
Red Hat Enterprise Linux 4.0 (x86) " glibc 2.3.3-36
" pam 0.77-47 or greater
" perl 5.8.0 or greater
" zlib 1.2.1-3 or greater
RPMs supported on the AMD64 and EM64T platform
HP SMH supports the following RPMs for each of the Linux operating systems on the AMD64
and EM64T platform.
Operating system RPM
SUSE Linux Enterprise Server 9 (AMD64 and EM64T) " glibc 2.3.3-98 or greater
" pam 0.77-221 or greater
" perl 5.8.0 or greater
" zlib 1.2.1-70 or greater
Red Hat Enterprise Linux 4.0 (AMD64 and EM64T) " glibc 2.3.3-36
" pam 0.77-47 or greater
" perl 5.8.0 or greater
" zlib 1.2.1-3 or greater
RPMs supported on the x86 platform 13
RPMs supported on the Itanium platform
HP SMH supports the following RPMs for each of the Linux operating systems on the Itanium
platform.
Operating system RPM
Red Hat Enterprise Linux 4.0 and 5.0 (Integrity platforms) " glibc-2.3.4
" j2sdk-1-4-2 (version 2.1.7 and earlier)
" jrockit-R27.1.0-jdk1.5.0
" net-snmp-utils-5.1.2-11.EL4.6hp
" net-snmp-perl-5.1.2-11.EL4.6hp
" openssl-0.9.7a-43.8 or greater
" pam-0.77-66.14 or greater
" perl-5.8.5 or greater
SUSE Linux Enterprise Server 9 and 10 for Integrity Linux " glibc-2.3.3 or greater
" j2sdk-1-4-2 (version 2.1.7 and earlier)
" jrockit-R27.1.0-jdk1.5.0
" openssl-0.9.7d-15 or greater
" net-snmp-5.1-80.16hp
" pam-0.77-221
" perl-5.8.3
" zlib-1.2.1-70 or greater
14 Installation requirements
NOTE: The AMD64 is an AMD Opteron processor.
The EM64T is an Intel Xeon processor with Extended Memory 64 Technology.
The x86 is an Intel Pentium III/IV/Xeon 32-bit processor.
The IPF is an Intel Itanium 64-bit processor.
Verifying system requirements
Before installation begins, the installation utility verifies whether:
" For HP-UX, Linux, and Windows, the operating system meets the minimum requirements.
If HP SMH does not support the operating system on a system, an error message appears,
indicating that an invalid operating system is found.
" For HP-UX, Linux, and Windows, the user is logged in with administrator/root rights. If the
user is not logged in with these rights, an error message appears, indicating that
administrator/root rights were not detected.
" For Linux, during a Linux installation on an x86 platform, if the Linux dependencies are not
met, the missing dependencies are displayed.
" For Linux, if a dependency is not met on an Itanium platform, the installation will not
complete.
Obtaining the HP SMH software
You can obtain HP SMH software from the following HP media and web sites:
HP media
HP SMH is available on the following media:
" HP-UX 11i v3 (B.11.31) Operating Environment DVD, February 2007 or later
" HP-UX 11i v3 (B.11.31) Applications DVD, February 2007 or later
" HP-UX 11i v2 (B.11.23) Operating Environment DVD, May 2005 or later
" HP-UX 11i v2 (B.11.23) Applications DVD, September 2005 or later
" HP-UX 11i v1 (B.11.11) Operating Environment DVD, September 2005 or later
" HP-UX 11i v1 (B.11.11) Applications DVD, May 2005 or later
" HP SmartSetup CD 4.6 or later
" SmartStart CD 7.20 or later
" Support Pack 7.20 or later
HP web sites
The HP web sites are accessible from any system with a web browser and access to the Internet:
" To download the latest software versions, go to the HP web site at http://www.hp.com.
" For HP-UX, you can also find the software on the Software Depot home at http://
www.hp.com/go/softwaredepot.
" For Linux and Windows, HP SMH is available in the ProLiant Support Pack and Integrity
Support Pack. To download the latest version of the ProLiant Support Pack or Integrity
Support Pack, go to the Support and Troubleshooting link on http://www.hp.com.
Verifying system requirements 15
16
3 Initial setup
You can install HP System Management Homepage (HP SMH) on systems running HP-UX,
Linux, and Windows.
Additionally, you can install HP SMH locally using the Windows ProLiant Support Pack or the
Linux RPM (Red Hat Package Manager), or remotely with optional preconfiguration using the
ProLiant Remote Deployment Utility or the Linux Deployment Utility.
Installation information
" For HP-UX systems
HP SMH is installed or updated using the HP-UX Operating Environment (OE) media or
Applications media. You do not have to configure any settings to run the product.
For HP-UX, the configuration settings are preserved in the
/opt/hpsmh/conf.common/smhpd.xmlfile.
" For Linux systems
HP SMH is installed by an RPM package without asking you to configure any settings. After
the installation is complete, run theperlscript utility (/opt/hp//hpsmh/hpSMHSetup.pl
on ProLiant or/opt/hp/hpsmh/smhconfig/hpSMHSetup.sh on Itanium) to set the
security options used by all of the HP Web-based Agents on the system. Otherwise default
values are used for these settings.
For Linux systems, the configuration settings are carried over from the
/opt/hp/hpsmh/conf/smhpd.xmlfile.
" For Windows systems
The configuration settings are carried over from the\hp\hpsmh\conf\smhpd.xmlfile,
and the wizard initiates the configuration.
NOTE: If a Management HTTP Server is currently installed on the machine, the configuration
settings are carried over to that system.
If HP Systems Insight Manager is installed after HP SMH is installed, the HP SMH 2048-bit key
pair will be replaced with the HP Systems Insight Manager 1024-bit key pair.
You can also install HP SMH on Integrity servers from the HP SmartSetup CD.
Installation information 17
18
4 Installing on HP-UX
This chapter provides steps to install HP System Management Homepage (HP SMH) on the
HP-UX Operating Environments (OEs):
" System Administration Management Tool changes: SAM and HP SMH (page 19)
" Installing on HP-UX (page 19)
" Installation requirements (page 20)
" Installing HP SMH and dependent applications (page 20)
" Using the Applications media (page 22)
" Using Software Depot (page 22)
" Configuring HP SMH (page 23)
" Patching or updating the software (page 25)
System Administration Management Tool changes: SAM and HP SMH
The HP-UX System Administration Manager (SAM) is deprecated in HP-UX 11i v3. HP SMH is
the system administration tool for managing HP-UX 11i. HP SMH provides web-based systems
management functionality, at-a-glance monitoring of system component health and consolidated
log viewing. HP SMH also provides a Terminal User Interface (TUI). SAM continues to provide
access to TUI (Terminal User Interface) and X-based interfaces. More details on HP SMH are
available in the Next generation single-system management on HP-UX 11i v2 (B.11.23) white paper
located at http://docs.hp.com/en/4AA0-4052ENW/4AA0-4052ENW.pdf.
Some of the key changes are described below:
" The SAM Functional Area Launcher (FAL) is replaced by the HP SMH web-based Graphical
User Interface (GUI).
" The enhanced TUI offers improved look and feel, online viewing of manpages, command
previews, and other improvements.
" For HP-UX 11i v3 (B.11.131) only, a new command, smh(1m) is introduced (/usr/sbin/smh).
This is an enhanced version of the sam(1m) command (/usr/sbin/sam).
" Thesamcommand in/usr/sbin/samis deprecated. Any invocation of/usr/sbin/sam
will display the deprecation message and launch/usr/sbin/smhautomatically.
Installing on HP-UX
To install HP SMH on HP-UX, you have several options:
" Installing from the HP-UX 11i v3 (B.11.31) OE media (February 2007 or later) and from the
HP-UX 11i v3 (B.11.31) Applications media (February 2007 or later)
" Installing from the HP-UX 11i v2 (B.11.23) OE media (May 2005 or later) and from the HP-UX
11i v2 (B.11.23) Applications media (September 2005 or later)
" Installing from the HP-UX 11i v1 (B.11.11) OE media (September 2005 or later) and from the
HP-UX 11i v1 (B.11.11) Applications media (May 2005 or later)
" Installing from the HP SMH web site, which you can find on the Software Depot home at
http://www.hp.com/go/softwaredepot .
NOTE: After you install HP SMH, it is already configured for you to start using immediately.
To change the default configuration settings, go to Configuring HP SMH (page 23).
System Administration Management Tool changes: SAM and HP SMH 19
Installation requirements
To install HP SMH, your system must meet the minimum requirements. The following list
provides a general review of requirements. For detailed information regarding minimum
requirements, see Chapter 2: Installation requirements (page 11).
" HP-UX 11i v1 (B.11.11) for HP Servers and Workstations
HP-UX 11i v2 (B.11.23) for HP Integrity Servers and HP 9000 Servers
HP-UX 11i v3 (B.11.31) for HP Integrity Servers and HP 9000 Servers
" Mozilla or Firefox browser
" Administrator privileges on system
" Dependent applications (see next section)
Installing HP SMH and dependent applications
HP SMH requires several applications, but some applications are optional. You might already
have these applications installed on your system. The following bundle information will help
you identify the correct bundles to download and install.
Product Bundle Path Status Release
HP SMH SysMgmtWeb /opt/hpsmhand Required HP-UX 11i v1, v2, v3
/var/opt/hpsmh
HP-UX Apache-based hpuxwsApache /opt/hpws/apache Required HP-UX 11i v1, v2, v3
Web Server
OpenSSL OpenSSL /opt/openssl Required HP-UX 11i v1, v2, v3
HP-UX Common SysMgmtBase usr/samand Required HP-UX 11i v2, v3
System Management /opt/hpsmh/lib
Enablers
HP-UX Strong KRNG11i /usr/conf or Recommended HP-UX 11i v1
Random Number /usr/conf/lib/librng.a,
You can find this
Generator /usr/share,
application on the
/usr/include,
Software Depot Home
/sbin/init.d,
at
/sbin/rc1.d
http://www.hp.com/go/
softwaredepot The
KRNG11ibundle
requires a system
reboot.
HP-UX Tomcat-based hpuxwsTomcat /opt/hpws/tomcat Recommended: HP-UX 11i v1, v2, v3
Servlet Engine Certain HP SMH
plugins, such as
Partition Manager
require it.
HP WBEM Services WBEMSvcs /opt/wbem Recommended: HP-UX 11i v1, v2, v3
Certain HP SMH
plugins, such as
Property Pages found
on the Home page
require it.
HP-UX System Fault SysFaultMgmt /opt/sfm/ Recommended: HP-UX 11i v1, v2, v3
Management Certain HP SMH
plugins, such as
Property Pages found
on the Home page
require it.
20 Installing on HP-UX
Product Bundle Path Status Release
HP-UX Software HPUXBaseAuxfor /usr/lib/sw/wbem/ Recommended: HP-UX 11i v1, v2, v3
Distributor HP-UX 11i v1 and v2. Certain HP SMH
plugins, such as
SwMgmtMinfor
Property Pages found
HP-UX 11i v3.
on the Home page
require it.
LAN Provider for WBEMP-LAN-00 /opt/lanprovider/ Recommended: HP-UX 11i v1, v2, v3
Ethernet LAN Certain HP SMH
interfaces plugins, such as
Property Pages found
on the Home page
require it.
WBEM Provider for FCProvider /opt/fcprovider/ Optional: Certain HP HP-UX 11i v2, v3
FC HBAs SMH plugins, such as
Property Pages found
on the Home page
require it.
WBEM Provider for SCSIProvider /opt/scsiprovider/ Optional: Certain HP HP-UX 11i v2, v3
SCSI HBA SMH plugins, such as
Property Pages found
on the Home page
require it.
Java Java2 1.4 SDK for /opt/java1.4 Optional: Certain HP HP-UX 11i v1, v2, v3
HP-UX (T1456AA) SMH plugins, such as
Partition Manager
require it.
HP-UX CDE User CDE /usr/dt/lib/, Optional: Certain HP HP-UX 11i v1, v2, v3
Interface /usr/dt/lib/hpux32/, SMH plugins require
and it; e.g., DSAU.
/usr/dt/lib/hpux64/
HP-UX X Window X11 /opt/atok/X11, Optional: Certain HP HP-UX 11i v1, v2, v3
Software /usr/bin/X11 , SMH plugins require
and/usr/lib/X11/ it; e.g., fsweb.
If you do not have these applications on your system, you can use the following resources to
install them before or after you install HP SMH:
" If you installed or updated HP-UX 11i v3 (B.11.31) from the media, then the applications
were recommended to install. If you installed or updated HP-UX 11i v1 (B.11.11) or HP-UX
11i v2 (B.11.23) from the media, then the applications were default installed. See the HP-UX
Installation and Update Guide on the HP Technical Documentation web site at http://
docs.hp.com for instructions on how to install and update HP-UX, including recommended
and default-installed HP application bundles. See Using the Applications media (page 22).
" You can useswinstallto install or update the bundles (for example,hpuxwsApacheand
hpuxwsTomcat) using the HP-UX 11i v1 (B.11.11), HP-UX 11i v2 (B.11.23), and HP-UX 11i
v3 (B.11.31) media. See Using the Applications media (page 22).
" You can go to the Software Depot Home at http://www.hp.com/go/softwaredepot to search
for and download the application bundles. You can then useswinstallto install the
applications. See Using Software Depot (page 22).
" You can also download the bundles to a depot on your network and use Ignite-UX and
Software Distributor to install them. This process is helpful if you are creating one image to
install on multiple systems. See the Ignite-UX Administration Guide and the Software Distributor
Administration Guide on the HP Technical Documentation web site at http://docs.hp.com.
Installing HP SMH and dependent applications 21
Using the Applications media
To install HP SMH and other HP Applications, you must have root privileges. These instructions
assume you are installing from a DVD.
1. Mount the Applications DVD. To install software from the Applications DVD, you must
mount the DVD as a file system that HP-UX 11i can access:
a. Determine the DVD device name.
Use theioscan -funC diskcommand to list disk devices, including the DVD devices.
b. Create a mount point for the Applications DVD, if one does not yet exist.
The mount point is a directory that HP-UX uses as an access point for the DVD. Often
a/cdromdirectory is used. If this directory does not exist, create it using themkdir
command.
c. Use themountcommand to mount the DVD.
Specify the DVD device name and mount point. For example, the following command
mounts the/dev/dsk/c1t0d0device as the/cdromdirectory:
mount /dev/dsk/c1t0d0 /cdrom
See the mount(1M) manpage for details.
2. To determine which products and versions are on your system, use theswlistcommand:
/usr/sbin/swlist -l product
3. Useswinstallto install software from the Applications DVD.
The following example usesswinstallto install software from the source mounted at
/cdrom:/usr/sbin/swinstall -s /cdrom bundlename
See the swinstall(1M) manpage for details.
4. Select and install software from the Applications DVD.
Theswinstallprogram has an interface for selecting and installing software from the
DVD.
5. Unmount and eject the Applications DVD.
You must unmount the DVD before you can eject it from the DVD-ROM drive. The DVD is
automatically unmounted whenever the server reboots.
Use theumountcommand to unmount the DVD. For example,umount /cdromunmounts
the/cdromfile system. See the umount(1M) manpage for details.
TIP: After the installation is complete, you can start using HP SMH immediately.
Using Software Depot
To install HP SMH and other HP Applications, you must have root privileges.
1. Go to the Software Depot Home at http://www.hp.com/go/softwaredepot.
2. Find the product that you want to download. Each product has a web page with information
and download links.
3. Click the Receive for Free link.
4. Fill out the registration form.
5. Review any installation instructions.
6. Save the bundle to a local directory such as/var/temp.
22 Installing on HP-UX
7. Use theswinstallcommand to install the product to your system:
swinstall -s /var/temp/ depot_filename.depot bundlename
For example:swinstall -s \
/var/temp/SysMgmtHomepage_A2214_HP-UX_B.11.23_IA+PA.depot SysMgmtWeb
TIP: After the installation is complete, you can start using HP SMH immediately.
Configuring HP SMH
The HP SMH configuration is based on environment variables and tags that are set by the
/opt/hpsmh/lbin/envvars,/opt/hpsmh/conf.common/smhpd.xmland
/opt/hpsmh/conf/timeout.conffiles. To change the default configuration, you can modify
the files to properly set the value of the following variables and tag.
Variable Description Script
JAVA_HOME Points to the /opt/hpsmh/lbin/envvars
/opt/hpsmh/lbin/envvars
directory where JDK is installed.
15 The tag defines the /opt/hpsmh/conf.common/smhpd.xml
HP SMH session timeout in minutes.
If it is defined, then the HP SMH
session is stopped after the time
period has elapsed without any user
activity. If it is not defined, then the
default for the HP SMH session
timeout is set to 15 minutes. You can
define the tag
using any value between 1 and 120
minutes.
Configuring HP SMH 23
Variable Description Script
TIMEOUT_SMH The TIMEOUT_SMH environment /opt/hpsmh/conf/timeout.conf
variable defines the HP SMH server
timeout in minutes. If it is defined
and lower than the HP SMH session
timeout, the HP SMH server will be
stopped three minutes after the HP
SMH session timeout. If it is defined
and greater than the HP SMH session
timeout, then the HP SMH server is
stopped after the time period has
elapsed without any user activity. If
it is not defined or equal to zero, then
HP SMH is started without timeout.
When the "automatic startup on boot"
startup mode is in use, the timeout
mechanism will not be started.
TIMEOUT_TOMCAT Defines the Tomcat timeout in /opt/hpsmh/conf/timeout.conf
minutes in the
/opt/hpsmh/conf/timeout.conf
file. If it is defined, Tomcat is stopped
after this time period has elapsed
without any request to a Java web
application. By default, the timeout
for the HP-UX Tomcat-based Servlet
Engine is 20 minutes and the timeout
for the HP-UX Apache-based Web
Server is 30 minutes. If it is not
defined or equal to zero, then Tomcat
is started without timeout. In this
case, Tomcat is stopped only when
HP SMH is stopped.
Configuring the startup mode
HP SMH supports three startup modes:
" Autostart URL
This mode is the default setting for startup. You can start HP SMH by using a web browser
and navigating tohttp://hostname:2301/. If autostart is configured as the default,
there is a daemon listening on http://hostname:2301 only (nothing is listening on port 2381
so that port will fail). When it contacts port 2301 (http), then the HP-UX Apache-based Web
Server is started on port 2381 (https) and the page is automatically redirected.
" Automatic startup on boot
This mode starts HP SMH automatically during system initialization. If the automatic startup
on boot start mode is enabled and the system was rebooted using this configuration, you
can access HP SMH by using a web browser and navigating tohttps://hostname:2381/.
Daemons are listening on both http://hostname:2301/ and https://hostname:2381/. If you
use port 2301 (http), then the HP-UX Apache-based Web Server is started on port 2381 (https)
and the page is automatically redirected.
NOTE: For autostart URL and automatic startup on boot, you can use http://hostname:2301,
as it works in both cases. This is possible on an HP-UX system only.
" Manual startup
You can start HP SMH from the HP-UX command line.
Use the/opt/hpsmh/bin/smhstartconfigscript to configure the startup mode of the
HP SMH server and the Tomcat instance that HP SMH uses.
24 Installing on HP-UX
Syntax:smhstartconfig [ -a {on|off} -b {on|off} ] [ -t {on|off} ]
Options:
-a {on|off} Enable/disable the autostart URL mode.
-b {on|off} Enable/disable the automatic startup on boot mode.
-t {on|off} Set the Tomcat startup mode where:
on Start Tomcat when HP SMH starts.
off Start Tomcat on demand (default).
If no options are specified, thensmhstartconfigdisplays the current startup mode. The
smhstartconfigcommand does not accept-a onand-b onoptions simultaneously.
For more information, see the smhstartconfig(1M) manpage:
man smhstartconfigorman sam
After changing the autostart mode to "on boot" (with thesmhstartconfig -b on -a
offcommand), without rebooting you can start the HP-UX Apache-based Web Server
processes with the/opt/hpsmh/lbin/hpsmh startcommand.
Patching or updating the software
HP may issue patches to HP SMH. If this is the case, you can adopt a proactive patch management
strategy and regularly check the standard patch resources:
" IT Resource Center (ITRC) at http://itrc.hp.com
" Standard HP-UX patch bundles on the OE and Applications media, and the ITRC
For a detailed guide on how to patch your HP-UX system, see the Patch Management User Guide
for HP-UX 11.x Systems on the HP Technical Documentation web site at http://docs.hp.com.
HP may issue software updates to HP SMH. If this is the case, check the following resources for
any notices regarding software updates:
" HP-UX OE media
" HP-UX Applications media
" HP SMH web page on the Software Depot home at http://www.hp.com/go/softwaredepot
Patching or updating the software 25
26
5 Installing on Windows
This chapter provides steps to install HP System Management Homepage (HP SMH) on the
Windows operating system.
" Installing HP SMH in-place on Windows (page 27)
" Installing HP SMH for Windows silently (page 30)
" Configuring HP SMH (page 32)
The next chapter provides steps to install HP SMH on the Windows operating system using the
ProLiant Remote Deployment Utility:
" Installing HP SMH using the ProLiant Remote Deployment Utility (page 33)
Installing HP SMH in-place on Windows
1. Initiate thesetup.exefile to invoke the installation wizard. After the wizard initiates, the
Welcome dialog box appears with a message explaining what product is being installed.
2. Click Next. The OS Groups dialog box appears. You can click Cancel to cancel the
installation process. If you click Cancel, a message appears, giving you the option to continue
installation or to exit the installation.
3. To add HP SMH group names:
a. In the Group Name field, enter a name for the operating system group.
b. Select an operating level to include Administrator, Operator, or User.
Note: You must assign an account to an operating system user group with administrator
privileges to access the Version Control Repository Manager from the Version Control Agent.
Do not use the administrator account to connect from the Version Control Agent to the
Version Control Repository Manager because it could potentially lock out the administrator
account. Using the administrator account, add another account with administrator privileges
to be used for Version Control Repository Manager access.
4. Click Add. The group name is added. A maximum of five entries can be added for each
group level.
Note: To delete a group name, select the group name and click Delete.
5. Click Next to continue or Back to return to the previous page. The User Access dialog box
appears.
Select one of the following access types:
" Select Anonymous Access to enable anonymous access to unsecured pages.
" Select Local Access Anonymous or Local Access Administrator to set up HP SMH
to automatically grant local IP addresses at the selected access level.
Caution: Selecting Local Access with administrator privileges provides all users with
access to the local console full access without prompting them for a user name or
password.
6. Click Next. The Trust Mode dialog box appears.
Installing HP SMH in-place on Windows 27
7. Select the level of security you want to provide from one of the following trust modes:
a. Trust By Certificate
i. Click Next. The Trusted Certificates dialog box appears. The Trusted Certificates
dialog box allows trusted certificate files to be added to the Trusted Certificate
List.
ii. Click Add File to browse and select any certificates to be included in the Trusted
Certificate List. The Add File dialog box appears. If an invalid file name is entered
in the file name field, an error message appears, indicating the file does not exist.
Click OK to select another file, or click Cancel to close the dialog box. The Trusted
Certificate List appears.
Note: If you click Next without adding any certificates to the list and no certificates
exist from a previous installation, a message appears indicating that if you do not
specify any trusted certificates, HP Systems Insight Manager cannot access the HP
Web-based Agents on this system. Click OK if you do not want HP Systems Insight
Manager to access the HP Web-based Agents on this system, or click Cancel to
close the dialog box and add the trusted certificates to the list.
Note: The Trust By Certificates option enables the HP SMH system and the HP
Systems Insight Manager system to establish a trust relationship by means of
certificates. This mode is the strongest method of security because it requires
certificate data and verifies the digital signature before enabling access.
iii. Click Next. The IP Binding dialog box appears.
or
i. Click Import. The Import Server Certificate dialog box appears.
ii. Enter the name or IP address of the server whose certificate you want to import.
iii. Click Get Cert. The certificate information appears.
iv. Verify the certificate information. If you want to add this certificate to the Trusted
Certificate List, click Accept and the certificate is added to the Trusted Certificate
List, or click Cancel if you do not want to add it to the Trusted Certificate List.
The Trusted Certificate List appears.
Note: You can add an unlimited number of trusted certificates.
v. Click Next. The IP Binding dialog box appears. Click Back to return to the Trust
Mode dialog box.
Note: To delete a certificate, select the certificate and click Delete. The selected
certificate is removed.
b. Trust By Name
i. Select Trust By Name.
ii. Click Next. The Trusted Server dialog box appears.
Note: Although the Trust By Name mode is a slightly stronger method of security
than the Trust All mode, it still leaves your system vulnerable to security attacks.
The Trust By Name mode sets up HP SMH to only accept certain requests from
servers with the HP Systems Insight Manager certificate names designated in the
Trust By Name field. The Trust By Name option is easy to configure and can
prevent unauthorized access. For example, you might want to use the Trust By
Name option if you have a secure network, but your network has two groups of
administrators in two separate divisions. The Trust By Name option would prevent
one group from installing software to the wrong system. This option does not verify
anything other than the HP Systems Insight Manager certificate name submitted.
iii. Enter the names of the certificate of HP Systems Insight Manager servers you want
to trust.
28 Installing on Windows
Note: The HP SIM server's certificate name cannot contain the following characters:
~, !, `, @, #, $, %, ^, &, *, (, ), +, =, ", :, ', <, >, ?, ,, |, and ;.
iv. Click Add to add the name of a certificate of HP Systems Insight Manager server
you want to trust.
v. Click Next. The IP Binding dialog box appears.
Note: If you click Next without adding any HP SIM server's certificate names to
the list, an error message appears, indicating that if you do not specify any trusted
server names, HP Systems Insight Manager cannot access the HP Web-based Agents
on this system. Click OK to proceed without trusting any systems, or click Cancel
to close the dialog box and add HP Systems Insight Manager server's certificate
names to the list.
Note: To delete a HP Systems Insight Manager server's certificate name, select the
certificate name and click Delete. The selected certificate name is removed.
c. Trust All
i. Select Trust All.
ii. Click Next. The IP Binding dialog box appears.
Note: The Trust All option leaves your system vulnerable to security attacks and
sets up HP SMH to accept certain requests from any server. For example, you might
want to use Trust All if you have a secure network, and everyone in the network
is trusted.
8. Select IP Binding to enable the Subnet IP Address and NetMask.
The IP Binding dialog box enables you to bind to specific IP addresses that match a specific
Subnet IP Address or NetMask. It restricts the subnet you want to manage.
a. Enter the Subnet IP Address in the designated field.
b. Enter the NetMask in the designated field.
c. Click Add, and the Subnet IP Address/NetMask is displayed in the dialog box. To delete
a Subnet IP Address/Netmask from the dialog box, select a Subnet IP Address/NetMask,
and click Delete. The Subnet IP Address/Netmask is removed from the dialog box.
Note: You can add up to five Subnet IP Address/NetMask pairs. If you enter an invalid
Subnet IP Address/Netmask, an error message appears indicating theSubnet IP
address or Netmask is invalid. Click OK. Enter a valid Subnet IP
address/Netmask and click Add again.
9. Click Next. The IP Restricted Login dialog box appears. The IP Restricted Login dialog
box enables you to select specific IP addresses or IP address ranges to include or exclude
from gaining login access. Although optional, HP SMH can restrict login access based on
the IP addresses of the machine attempting to gain access.
Installing HP SMH in-place on Windows 29
10. Select IP Restricted Login, and click Next. The IP Address to Include dialog box appears.
This dialog box enables you to specify the IP address or IP address ranges to grant login
access permission. If there are IP addresses in the Inclusion list, then only those IP addresses
are enabled for login privileges. If there are no IP addresses in the Inclusion list, then login
privileges are permitted to all IP addresses that are not in the Exclusion list.
Note: A single address and ranges of addresses can be accepted in the IP Restricted Login
dialog box. Enter the single address in the first box.
a. In the Include field, enter a beginning IP address to which you want to grant login
access.
b. In the To field, enter an ending IP address to which you want to grant login access. All
IP addresses that fall between the beginning and ending IP addresses are granted login
access.
c. Click Add. The IP address or IP address range is added to the Inclusion list. To delete
an IP address or IP address range, select an IP address or IP address range, and click
Delete. The IP address or IP address range is deleted from the Inclusion list.
Note: If you enter an invalid IP address or IP address range, an error message appears
indicating the IP address is invalid. Click OK. Enter a valid IP address or IP address
range, and click Add again.
11. Click Next. The IP Address to Exclude dialog box appears.
a. In the Exclude field, enter a beginning IP address to which you want to deny login
access.
b. In the To field, enter an ending IP address to which you want to deny login access. All
IP addresses that fall between the beginning and ending IP addresses are denied login
access.
c. Click Add. The IP address or IP address range is added to the Exclusion list. To delete
an IP address or IP address range, select an IP address or IP address range, and click
Delete. The IP address or IP address range is deleted from the Exclusion list.
Note: If you enter an invalid IP address or IP address range, an error message appears,
indicating the IP address is invalid. Click OK. Enter a valid IP address or IP address
range, and click Add again.
Note: If Next is selected without adding any IP addresses to either the Include or
Exclude lists, a warning message appears stating, IP Restricted Login checkbox
will be marked as disabled. Do you want to proceed without adding
any IP Address restrictions?If you select OK, the IP Restricted Login option
on the IP Restricted Login dialog box is deselected, and the Install Summary dialog
box appears.
12. Click Next. The Install Summary Panel appears. The Install Summary Panel lists a
summary of the options that you specified during the installation.
13. Click Next. The installation process is started.
Note: During the installation of HP SMH, the Cancel button is disabled. Even if you click
X in the upper-right corner of the box, the current operation cannot be cancelled.
14. Click Finish to complete the installation.
Installing HP SMH for Windows silently
The HP SMH installation for Windows enables you to silently install HP SMH. After the
installation is complete, you can configure HP SMH settings.
30 Installing on Windows
NOTE: Do not copy or import certificates when using thesetup.exe /roption.
Generating a setup.iss file
To generate your ownsetup.iss, run the following command:
1. setup.exe /r
2. The HP SMH Installation interface appears and records your selections.
3. Thesetup.issfile is placed into the Windows directory. You can move this file to the
location of your choice.
Installing silently using the CLI
To install silently using the CLI, use the following command:
setup.exe /s /f1
For example, you might entersetup.exe /s /f1c:\mydirectory\setup.iss.
Note: There are no spaces betweenf1and the path.
Reinstalling silently using the CLI
To reinstall silently using the CLI:
setup.exe /s /reinst /f1
Note: The/s /reinstcommand reinstalls the same version of HP SMH. The/s /preserve
command preserves the existingsmhpd.xmlsettings.
If you are performing an initial installation of HP SMH 2.x, the/preservecommand preserves
the pre-2.x settings if present in thecompaq\wbemdirectory.
If an HP SMH 2.x installation is already present, you must entersetup.exe /s /reinst
/preserve /f1. If you do not include/preserve, the
setup.issis applied.
Installing HP SMH for Windows silently 31
Configuring HP SMH
The HP SMH configuration is based on environment variables and tags that are set by the
%SystemDrive%\hp\hpsmh\conf\smhpd.xml, file. To change the default configuration, you
can modify the files to properly set the value of the following variables and tags.
Variable Description Script
15 The tag defines the %SystemDrive%\hp\hpsmh\conf\smhpd.xml
HP SMH session timeout in minutes.
If it is defined, then the HP SMH
session is stopped after the time
period has elapsed without any user
activity. If it is not defined, then the
default for the HP SMH session
timeout is set to 15 minutes. You can
define the tag
using any value between 1 and 120
minutes.
20 The tag defines the HP %SystemDrive%\hp\hpsmh\conf\smhpd.xml
SMH GUI timeout in seconds. If it is
defined, then HP SMH limits the
loading time of the webapps. If it is
not defined, then the default for the
HP SMH GUI timeout is set to 20
seconds. You can define the
tag using any value
between 10 and 3600 seconds.
N The tag defines the %SystemDrive%\hp\hpsmh\conf\smhpd.xml
HP SMH Rotate Logs file size. To
change the Rotate Logs file size, you
will need to edit the configuration file
smhpd.xml. You can define the
tag using any value
between 1 and 99, which represents
the log size in megabytes.
path The log-base-dir tag defines the path :\hp\hpsmh\conf\smhpd.xml
for Error_log and Access_log. By (/opt/hp/hpsmh/conf/smhpd.xml
default Error_log and Access_log will in Linux).
be located in
:\hp\hpsmh\logs
(/var/spool/opt/hp/hpsmh/logs in
Linux) folder. The path can be
changed by giving the required path
in the tag and create the logs folder
under that path.
value The max-threads tag configures the :\hp\hpsmh\conf\smhpd.xml
number of threads used by apache (/opt/hp/hpsmh/conf/smhpd.xml
via the smhpd.xml file. in Linux).
" Default value - WIndows: 250 and
Linux: 25
" Max value - Windows: 512 and
Linux: 64
" Min value - Windows: 64 and
Linux: 25
32 Installing on Windows
6 Installing HP SMH using the ProLiant Remote Deployment
Utility
This chapter provides steps to install HP System Management Homepage (HP SMH) on the
Windows operating system using the ProLiant Remote Deployment Utility.
" Installing remotely on Windows using ProLiant Remote Deployment Utility (page 34)
The previous chapter provides steps to install HP SMH in-place on the Windows operating
system.
" Installing HP SMH in-place on Windows (page 27)
The ProLiant Remote Deployment Utility for Windows is a graphical application that provides
enhanced ProLiant Support Pack deployment capabilities. Using a graphical interface, the utility
enables you to deploy and maintain ProLiant Support Packs and Smart Components on a local
server or remote server accessible over a network connection.
To run the ProLiant Remote Deployment Utility, invoke Setup.exe which is present as part of
the ProLiant Support Pack. The ProLiant Support Pack is identified based on the operating system
installed on the server. The components that are supported for installation are listed in the right
side of the frame. HP SMH can be installed as a part of the complete ProLiant Support Pack, or
you can install the HP SMH component individually. The HP SMH component also provides
support for preconfiguration, which allows the configurations of the component to be configured
and saved as part of the component itself before installing on target machines. This feature
facilitates the installation of the preconfigured component without any user intervention, and
the installed component has the configurations, which are saved during preconfiguration.
All configurable components are listed at the top of the left frame under All configurable
components.
NOTE: Installation of a preconfigured component overwrites the configuration settings of any
existing HP SMH installation. If you want to retain existing settings, do not preconfigure the
component.
33
Installing remotely on Windows using ProLiant Remote Deployment Utility
To preconfigure the HP SMH component:
1. Under All configurable components, right-click on the HP System Management
Homepage component and select Configure. The Welcome wizard appears.
2. Click Next. The Operating System Group dialog box appears providing you with an option
to add the groups and select the Operating level.
3. To add HP SMH groups:
a. In the Group Name field, enter a name for the group. For example, you might want to
use vcAdmin for a Version Control administrator group.
Note: You must assign an account to an operating system user group with administrator
privileges to access the Version Control Repository Manager from the Version Control
Agent. Do not use the Administrator account to connect from the Version Control Agent
to the Version Control Repository Manager because it could potentially lock out the
administrator account. Using the administrator account, add another account with
administrator privileges to be used for Version Control Repository Manager access.
b. Select an Operating Level from the dropdown list. This level determines the privileges
assigned to this group.
c. Click Add. The group name is added. A maximum of five entries can be added for each
group level.
After a group name is added, you can delete it by clicking the X located before the group
name.
4. Click Next. The User Access dialog box appears.
5. The User Access dialog box enables you to configure HP SMH from the following access
types:
" Select Anonymous Access to enable anonymous access to unsecured pages.
" Select Local Access Anonymous or Local Access Administrator to set up HP SMH
to automatically grant local IP addresses at the selected access level.
Caution: Selecting Local Access with administrator privileges provides all users with
access to the local console full access without prompting them for a user name or
password.
6. Click Next. The Trust Mode dialog box appears.
34 Installing HP SMH using the ProLiant Remote Deployment Utility
7. Select the level of security you want to provide from one of the following trust modes:
a. Trust By Certificate
i. Select Trust By Certificate.
ii. Click Next. The Trusted Certificates dialog box appears. The Trusted Certificates
dialog box allows trusted certificate files to be added to the Trusted Certificate
List.
iii. Click Browse to select the certificate file. After the certificate file is selected, the
certificate data appears on the screen.
iv. Click Add. The certificate appears under Certificate File. To delete a certificate file
from the screen, click the X located before the certificate file.
v. Note: If you click Next without adding any certificates to the list and no certificates
exist from a previous installation, a message appears indicating that if you do not
specify any trusted certificates, HP Systems Insight Manager cannot access the HP
Web-based Agents on this system. Click OK if you do not want HP Systems Insight
Manager to access the HP Web-based Agents on this system, or click Cancel to
close the dialog box and add the trusted certificates to the list.
Note: The Trust By Certificates option enables the HP SMH system and the HP
Systems Insight Manager system to establish a trust relationship by means of
certificates. This mode is the strongest method of security because it requires
certificate data and verifies the digital signature before enabling access.
vi. Click Next. The IP Binding dialog box appears.
b. Trust By Name
i. Select Trust By Name.
ii. Click Next. The Trusted Server dialog box appears.
Note: Although the Trust By Name mode is a slightly stronger method of security
than the Trust All mode, it still leaves your system vulnerable to security attacks.
The Trust By Name mode sets up HP SMH to only accept certain requests from
servers with the HP Systems Insight Manager's certificate names designated in the
Trust By Name field. The Trust By Name option is easy to configure and can
prevent non malicious access. For example, you might want to use the Trust By
Name option if you have a secure network, but your network has two groups of
administrators in two separate divisions. The Trust By Name option would prevent
one group from installing software to the wrong system. This option does not verify
anything other than the HP Systems Insight Manager certificate name submitted.
iii. Enter the names of the certificate of SIM servers you want to trust.
Note: The HP Systems Insight Manager certificate name cannot contain the following
characters: ~, !, `, @, #, $, %, ^, &, *, (, ), +, =, ", :, ', <, >, ?, ,, |, and ;.
iv. Click Add to add the certificate name of a SIM server you want to trust. The
certificate name appears under Trusted Server. To delete a server's certificate
name, click the X located before the certificate name.
v. Click Next. The IP Binding dialog box appears.
Note: If you click Next without adding any HP Systems Insight Manager server's
certificate names to the list, an error message appears, indicating that if you do not
specify any trusted server names, HP Systems Insight Manager cannot access the
HP Web-based Agents on this system. Click OK to proceed without trusting any
systems, or click Cancel to close the dialog box and add HP Systems Insight
Manager server's certificate names to the list.
c. Trust All
i. Select Trust All.
Installing remotely on Windows using ProLiant Remote Deployment Utility 35
ii. Click Next. The IP Binding dialog box appears.
Note: The Trust All option leaves your system vulnerable to security attacks and
sets up HP SMH to accept certain requests from any server. For example, you might
want to use Trust All if you have a secure network, and everyone in the network
is trusted.
8. Select IP Binding to enable the Subnet IP Address and NetMask.
The IP Binding dialog box enables you to bind to specific IP addresses that match a specific
Subnet IP Address or NetMask. It restricts the subnet you want to manage.
a. Enter the Subnet IP Address in the designated field.
b. Enter the NetMask in the designated field.
c. Click Add. The Subnet IP Address/NetMask appears in the IP Binding list. To delete a
Subnet IP Address/Netmask, click the X located before the Subnet IP Address/Netmask
pair. The Subnet IP Address/Netmask is deleted from the IP Binding list.
Note: You can add up to five Subnet IP Address/NetMask pairs.
Note: If you enter an invalid Subnet IP Address/Netmask, an error message appears
indicating the Subnet IP address or Netmask is invalid. Click OK. Enter a valid Subnet
IP address/Netmask and click Add again.
9. Click Next. The IP Restricted Login dialog box appears. The IP Restricted Login dialog
box enables you to select specific IP addresses or IP address ranges to include or exclude
from gaining login access. Although optional, HP SMH can restrict login access based on
the IP addresses of the machine attempting to gain access.
10. Select IP Restricted Login.
a. Enter the IP address or IP address range.
b. Select to Include or Exclude.
c. Click Add. The IP address or IP address range appears under the Inclusion or Exclusion
list. To delete an IP address or IP address range, click the X located next to the IP address
or IP address range. The IP address or IP address range is removed from the list.
Note: You can add as many IP addresses or IP address ranges as you want.
Note: If you enter an invalid IP address or IP address range, an error message appears
indicating the IP address is invalid.
Note: If Finish is clicked without adding any IP addresses to the Include or Exclude
lists, a warning message appears statingIP Restricted Login checkbox will
be marked as disabled. Do you want to proceed without adding any
IP Address restrictions?If you click OK, the IP Restricted Login option on the
IP Restricted Login dialog box is deselected
11. Click Finish to save the configurations for the component.
You can install this preconfigured component to target systems without the need to configure
settings in HP SMH after installation. For more information about using the ProLiant Remote
Deployment Utility, see the HP ProLiant Support Pack and Deployment Utilities User Guide.
36 Installing HP SMH using the ProLiant Remote Deployment Utility
7 Installing HP SMH using the HP Smart-Update Manager
(HPSUM)
This chapter provides steps to install HP System Management Homepage (HP SMH) on the
Windows operating system using the HP Smart-Update Manager (HPSUM).
" Installing HP SMH remotely on Windows using HP Smart-Update Manager (HPSUM)
(page 38)
" To preconfigure the HP SMH component: (page 38)
The previous chapter provides steps to install HP SMH using the ProLiant Remote Deployment
Utility.
" Installing remotely on Windows using ProLiant Remote Deployment Utility (page 34)
The HP Smart-Update Manager utility enables you to deploy PSP software and firmware
components from a single, easy-to-use interface. Using a graphical interface, the utility enables
you to deploy and maintain ProLiant Support Packs and Smart Components on a local server
or one or more remote servers accessible over a network connection. This utility enables legacy
support of existing software and firmware components while simplifying the overall deployment
process. The utility also provides installation logic and version control that automatically check
for dependencies, installing only the correct updates for optimal configuration.
ProLiant Support Pack contains numerous files. All files must be present in the same directory
as the HPSUM.EXE program for the PSP to be properly installed. HP SMH can be installed as a
part of the complete ProLiant Support Pack, or you can install the HP SMH component
individually. The HP SMH component also provides support for pre-configuration, which allows
the configurations of the component to be configured and saved as part of the component itself
before installing on target machines. This feature facilitates the installation of the pre-configured
component without any user intervention, and the installed component has the configurations,
which are saved during pre-configuration.
NOTE: Installation of a pre-configured component overwrites the configuration settings of an
existing HP SMH installation. If you want to retain existing settings, do not pre-configure the
component.
37
Installing HP SMH remotely on Windows using HP Smart-Update Manager
(HPSUM)
1. To start the deployment, run HPSUM.EXE. The Inventory Progress screen is displayed
while the HP Smart-Update Manager builds an inventory of available updates.
2. The Select Installation Host(s) screen appears when the inventory process is complete.
3. If you want to install HP SMH on the local server, check the Local Host checkbox and click
Next.
4. If you want to install HP SMH on remote server(s):
a. Select the Remote Host or Group checkbox and click Manage Host. The Manage Host
panel is displayed.
b. Click Add Host. Here, you can add a new host(s) by DNS name or IP Address or you
have the option to add a range of IP Addresses.
c. You can also create a group of systems on which you want to install HP SMH by selecting
Manage Groups.
Note: If you chose to Manage Groups, you will need to give the Windows credentials
for each remote server.
5. After selecting the target server, click Next. This will show Discovery Progress while the
system is checked for installed items. Then, the Select Bundle Filter page is displayed.
6. From the Select Bundle Filter page, select the appropriate PSP bundle, addording to the
target server's operating system architecture (either x86 or x64), and check the appropriate
option for the bundle filter. There are three options provided:
I. Allow Non-Bundle Version: Shows other versions of the product that are in the bundle.
This lets you include updates that may be newer than those released in the bundle.
II. Allow Non-Bundle Products: Shows updates for products that are not part of the
bundle. This lets you update other items on your system at the same time as applying
the bundle (as a convenience or because updates in the bundle may depend on them).
III. Force All Bundle Updates: Automatically sets the force flag for updates in the bundle.
This causes the update to install even if it is not necessary as long as the supported
hardware is present and installation conditions are met.
Note: Selecting the bundle filter option is not required when the HP SMH component is
being installed alone.
7. Click Next. This will take you to the Select Items to be installed panel. This panel shows
the components to be installed or displays Installation not needed or Excluded by filtering.
8. Check the System Management Homepage component and you can pre-configure the HP
SMH component by selecting Configure Now.
Note: If the PSP contains an older version of HP SMH than what is already installed on the
target server, the HP SMH component will be listed under Installation not needed section.
In this case, click Installation Options for HP SMH component and check the For Install
checkbox. The HP SMH component will now be listed under Updates to be Installed.
9. After selecting the HP SMH component, click Install. This will show the installation progress.
10. After installation is finished, the Installation Result panel will be displayed.
11. In the Installation Result panel, you will see two buttons Reboot Now and Exit.
12. If you want to reboot the system, select Reboot Now. If you want to exit the program, select
Exit. This will complete the HP Smart-Update Manager program.
To preconfigure the HP SMH component:
1. From the Welcome to the Configuration Wizard for the HP System Management
Homepage Component page, click Next. The Operating Systems Groups page appears.
38 Installing HP SMH using the HP Smart-Update Manager (HPSUM)
2. In the Group Name field, enter the name of an operating system group that you want to
assign (for example,vcadmin).
3. In the Operating Level field, select the appropriate level for the new group from the
dropdown list.
Note: The default Administrators Groups always have administrative access.
4. Click Add to assign the group. The new group appears under the operating system group
to which it was assigned.
Note: You can add up to five entries per operating system group.
5. Click Next. You can click Save to save your changes up to this point or click Cancel to
discard the changes and close the wizard.
6. Select one of the following options:
" Anonymous Access Anonymous Access is disabled by default. Enabling Anonymous
Access enables a user to access the HP System Management Homepage without logging
in. Select this option to allow anonymous access.
Caution: HP does not recommend the use of anonymous access.
" Local Access Local Access is disabled by default. Enabling Local Access enables a
user to locally gain access to the HP System Management Homepage without being
challenged for authentication, which means that any user with access to the local console
is granted full access if Administrator is selected. If Anonymous is selected, any local
user has access limited to unsecured pages without being challenged for a user name
and password.
Caution: HP does not recommend the use of local access unless your management
server software enables it.
7. Click Next. You can click Save to save your changes up to this point, or click Cancel to
discard the changes and close the wizard.
8. Select one of the following Trust Mode security options:
" Trust by Certificate Sets the HP System Management Homepage to accept configuration
changes only from HP SIM servers with trusted certificates. This mode requires the
submitted server to provide authentication by means of certificates. This mode is the
strongest method of security because it requires certificate data and verifies the digital
signature before allowing access. If you do not want to enable any remote configuration
changes, leave Trust by Certificate selected, and leave the list of trusted systems empty
by avoiding importing any certificates.
NOTE: HP strongly recommends using this option because it is more secure.
To trust by certificate:
1. Select Trust by Certificate, and click Next.
2. In the Certificate Name field, click Browse to select the certificate file. After the
certificate file is selected, the certificate data appears on the screen.
3. Click Add. The certificate appears under Certificate Files. You can click Save to
save your changes up to this point or click Cancel to discard the changes and close
the wizard.
4. Click Next. The IP Binding page appears.
" Trust by Name Sets the HP System Management Homepage to accept certain
configuration changes only from servers with the HP SIM certificate names designated
in the Trust By Name field. The Trust By Name option is easy to configure. For example,
you might use the Trust By Name option if you have a secure network with two separate
groups of administrators in two separate divisions. It prevents one group from installing
To preconfigure the HP SMH component: 39
software to the wrong system. This option verifies only the HP SIM server's certificate
name submitted.
NOTE: HP strongly recommends using the Trust by Certificate option because the
other options are less secure.
The server name option must meet the following criteria:
Each server's certificate name must be less than 64 characters.
The overall length of the server's certificate name list is 1,024 characters.
Special characters must not be included as part of theserver's certificate
name: ~ ' ! @ # $ % ^ & * ( ) + = \ ": ' < > ? , | .
Semicolons are used to separateserver's certificate names.
To trust by name:
1. Select Trust by Name, and click Next.
2. In the Trusted Server Name field, enter the HP SIM server's certificate name to
be trusted.
3. Click Add. The trusted HP SIM server's certificate name appears under the Trusted
Servers list. You can click Save to save your changes up to this point or click
Cancel to discard the changes and close the wizard.
4. Click Next. The IP Binding page appears.
" Trust All Sets the HP System Management Homepage to accept certain configuration
changes from any system.
NOTE: HP strongly recommends using the Trust by Certificate option because the
other options are less secure.
To trust all servers:
1. Select Trust All. You can click Save to save your changes up to this point or click
Cancel to discard the changes and close the wizard.
2. Click Next. The IP Binding page appears.
9. IP Binding specifies from which IP addresses the HP System Management Homepage accepts
requests and provides control over which nets and subnets requests are processed.
Administrators can configure the HP System Management Homepage to only bind to
addresses specified in the IP Binding page. A maximum of five subnet IP addresses and
netmasks can be defined.
An IP address on the server is bound if it matches one of the entered IP Binding addresses
after the mask is applied.
NOTE: The HP System Management Homepage always binds to 127.0.0.1. If IP Binding
is enabled and no subnet/mask pairs are configured, then the HP System Management
Homepage is only available to 127.0.0.1. If IP Binding is not enabled, you bind to all addresses.
To configure IP Binding:
1. Select IP Binding. The IP Binding page appears.
2. Enter the IP address.
3. Enter the netmask.
4. Click Add. The IP binding configuration is saved and appears under the IP Binding
List.
5. Click Next. The IP Restricted Login page appears.
40 Installing HP SMH using the HP Smart-Update Manager (HPSUM)
10. The IP Restricted Login enables the HP System Management Homepage to restrict login
access based on the IP address of a system.
You can set address restriction at installation time or by it can be set by administrators from
the IP Restricted Login page
" If an IP address is excluded, it is excluded even if it is also listed in the included box.
" If there are IP addresses in the inclusion list, then only those IP addresses are allowed
login access with the exception of localhost.
" If no IP addresses are in the inclusion list, then login access is allowed to any IP addresses
not in the exclusion list.
To include or exclude IP addresses:
1. In the From field, enter the IP addresses to include or exclude. You can enter an IP
address range to be included or excluded by entering a beginning IP address in the
From field and an ending IP address in the To field.
2. From the Type field, select Include or Exclude.
3. Click Add to add the IP address or IP address range to the Inclusion List or Exclusion
List.
4. Click Save. The HP System Management Homepage Login page for the HP System
Management Homepage system appears.
To preconfigure the HP SMH component: 41
42
8 Installing in-place on Linux
This chapter provides steps to install HP System Management Homepage (HP SMH) in-place
on Linux x86 systems and x86_64 systems.
" Installation for Linux on x86 and x86_64 (page 43)
Installing HP SMH on Linux x86 systems (page 43)
Installing HP SMH on x86_64 (page 43)
Configuring HP SMH (page 43)
The next chapter provides steps to install HP SMH in-place on Linux systems using the Linux
Deployment Utility.
" Installation for Linux Itanium (page 51)
Installing HP SMH on Linux Itanium systems (page 51)
" Configuring HP SMH (page 51)
Installation for Linux on x86 and x86_64
The HP SMH installation for Linux enables you to silently install HP SMH on x86 and x86_64
systems. After the installation is complete, you can configure the HP SMH settings.
NOTE: To install HP SMH, you must be logged in as root user.
Installing HP SMH on Linux x86 systems
To install HP SMH on x86 systems, your system must meet the minimum requirements. For
more information regarding minimum requirements, see Chapter 2 Installation requirements .
In addition, you must have thehpsmh-2.x.x.linux.i386.rpm.
Note: The general 32-bit RPM List is not installed by default.
To install HP SMH, enter the following command line:
rpm ivh hpsmh-2.x.x-linux.i386.rpm
A message appears indicating that HP SMH installed successfully with default configuration
values.
Installing HP SMH on x86_64
To install HP SMH on x86_64 systems, your system must meet the minimum requirements. For
more information regarding minimum requirements, see Chapter 2 Installation requirements .
In addition, you must have thehpsmh-2.x.x.linux-release.x86_64.rpm
To install HP SMH, enter the following command line:
rpm ivh hpsmh-2.x.x-linux-release.x86_64.rpm
A message appears indicating that HP SMH installed successfully with default configuration
values.
Configuring HP SMH
After HP SMH is installed, you can configure the settings. If you are migrating from Management
HTTP Server, the Management HTTP Server settings are retained. However, the retained settings
are configurable.
Installation for Linux on x86 and x86_64 43
To configure HP SMH settings:
1. Enter the following command to start the configuration:
perl /opt/hp/hpsmh/hpSMHSetup.pl
Enter the following command to start the configuration for Itanium systems:
perl /opt/hp/hpsmh/hpSMHSetup.sh
The Welcome screen appears, indicating that you can configure security and access
parameters on the following screens.
2. The Welcome screen indicates that you can configure security and access parameters for HP
System Management Homepage and related HP web-based management tools.
Press Enter. The Operating System Groups screen appears.
3. The Operating System Groups screen enables you to add operating system groups to HP
SMH.
Add or delete operating system groups in HP SMH. The following options are available:
a. To add groups:
i. At the prompt, enter1to add a group. The Add Operating System Groups screen
displays the operating system group lists.
Note: You can add up to five entries per group.
Enter one of the following options to assign the operating system group to the
Administrator Group List:
" Enter1for Administrator.
For example, to add admin1 to the Administrator operating system group:
A. Enter1for Administrator.
B. At the prompt,Enter the name of the operating system
group:enter admin1.
C. Press Enter. admin1 appears in the Administrator Group List.
D. Enter n to go to the next screen.
" Enter2for Operator.
" Enter3for User.
ii. Enter n to go to the next screen.
b. To delete a group:
i. Enter2to delete a group.
The following options are available:
" Enter1for Administrator. The Administrator Group List appears.
" Enter2for Operator. The Operator Group List appears.
" Enter3for User. The User Group List appears.
ii. At the prompt, enter1,2, or3.
iii. Enter the number next to the group name to be deleted. The group is deleted from
the group list.
Note: You can delete as many groups as you want by repeating this step.
iv. Press Enter when you are finished deleting to go to the next screen.
v. Enter n to go to the next screen. The Operating System Groups screen appears.
vi. Enter n to go to the next screen. The User Access screen appears.
44 Installing in-place on Linux
4. Configure Local and Anonymous Access. The following options are available:
" Enter1to enable Anonymous Access.
Caution: HP does not recommend the use of anonymous access.
" Enter2to disable Anonymous Access.
" Enter3to disable Local Access.
" Enter4to enable Local Access - Anonymous. Local Access enables you to locally
gain access to HP SMH without being challenged for authentication. Any local user has
access limited to unsecured pages without being challenged for a username and
password.
Caution: HP does not recommend the use of local access unless your management
server software enables it.
" Enter5to enable Local Access - Administrator. This option grants full access to secure
and unsecure pages. Any user with access to the local console is granted full access.
5. Enter n to go to the next screen or enter p to go to the previous screen.
6. Enter n to go to the next screen. The Trust Mode screen appears.
7. Configure the HP SMH trust mode.
Enter 1for Trust by Certificate.Trust Mode: Trust by Certificateappears.
The following options are available: Trust by Certificate, Trust by Name, Trust All and
Modify Certificate List.
Configuring HP SMH 45
a. Trust by Certificate
i. To add a certificate file:
A. Enter1. You are prompted for the certificate location.
B. Enter the file path of the trusted certificates to be added to the Trusted
Certificates List. Press Enter when you are finished.
For example:
I. File: /home/ServerName/cert1.pem .
II. Press Enter. Thecert1.pemis added to the Trusted Certificates List.
If the certificate file does not exist, a message appears indicating that
/home/ServerName/cert1.pem does not exist.
C. You can add as many certificates as you want by repeating these steps. Press
Enter when you are finished adding certificate files.
ii. To import a certificate:
A. Enter2. You are prompted for the server name.
B. Enter the name or IP address of the HP Systems Insight Manager server and
press Enter. The certificate is retrieved and displayed.
The following options are available:
" Enter1to accept the certificate. The file is saved.
" Enter2to reject the certificate. The file is not imported.
C. Press Enter when you are finished. The imported certificates display in the
Trusted Certificates List. You can import as many certificates as you want
by repeating these steps.
D. Press Enter when you are finished importing certificate files.
iii. To delete a certificate:
A. Enter3. You are prompted to enter the number associated with the certificate
file to be deleted.
B. Enter the number of the certificate file to be deleted.
C. Press Enter when you are finished. You can delete as many certificate files as
you want by repeating these steps.
D. Press Enter when you are finished deleting certificate files.
b. Trust by Name
i. Enter2to Trust by Name.Trust Mode: Trust by Nameappears.
ii. Enter4to Modify Server Name list.
To add an HP Systems Insight Manager server's certificate name:
A. Enter1. You are prompted to add an HP Systems Insight Manager server's
certificate name.
B. Enter the name of the certificate of HP Systems Insight Manager server to be
trusted and press Enter. The certificate name appears in the Trusted Server
Names list.
Note: You can add as many server certificate names as you want.
To delete a certificate name:
A. From the Server Name list, enter2.
B. Enter the number associated with the name of the certificate of the HP SIM
server to be deleted. The HP SIM server's certificate name is removed from
the Server Name list.
iii. Enter n for next. The Trust Mode Settings screen appears.
46 Installing in-place on Linux
c. Trust All
i. Enter3to Trust All.Trust Mode: Trust Allappears.
ii. Enter n for next. The IP Binding screen appears.
d. Modify Certificate List
Enter4to Modify Certificate List.
8. Bind IP addresses that match a subnet and netmask.
The following options are available:
a. Enable IP Binding
i. Enter1to enable the IP Binding, which sets it to ON.IP Binding: ONappears.
ii. Enter n to go to the next screen.
The following options are available:
To add an IP address:
A. Enter1to add an IP address. You are prompted for the IP address.
B. Enter the IP address to be added.IP Address: YourIPAddress appears.
You are prompted for the netmask.
C. Enter the netmask.netmask: YourNetmask appears.
Note: You can add or delete as many IP addresses as you want.
To delete an IP address:
A. Enter2.
B. Enter the number of the IP address or netmask to be deleted. The IP address
or netmask is removed from the IP address or netmask list.
iii. Enter n to go to the next screen. The IP Restricted Login screen appears.
b. Disable IP Binding
i. Enter2to disable the IP Binding, which sets it to OFF.IP Binding: OFFappears.
ii. Enter n to go to the next screen or enter p to go to the previous screen. The IP
Restricted Login screen appears.
Configuring HP SMH 47
9. Configure HP SMH to restrict login access based on the IP address of the system from which
the login is attempted.
The following options are available:
a. Enter1to enable an IP Restricted Login, which sets it to ON. IP Restricted Login:ON
appears.
To enable the IP Restricted Login:
i. Enter1. IP Restricted Login is set to ON.
ii. Press n for next. The Set IP Address Restrictions screen appears.
To add IP addresses to the Inclusion List:
A. Enter1for Include Login Restriction IP Address.
B. Enter1for Add.
C. Enter the IP address or IP address range you want to add to the Inclusion List.
The IP address or IP address range appears under the IP Address Inclusion
List.
Note: You can add or delete as many IP addresses or IP address ranges as you
want.
To delete an IP address or IP address range from the Inclusion list:
A. Enter2.
B. Enter the number associated with the IP address or IP address range to be
deleted and press Enter. The IP address or IP address range is deleted from
the Inclusion List.
To add an IP address or IP address range to the Exclusion list:
1. Enter2for Exclude Login Restriction IP Address
2. Enter1to add an IP address to the Exclusion List.
3. Enter the IP address or IP address range to be added to the Exclusion List. The
IP address or IP address range is added in the IP Address Exclusion List.
4. PressEnter. The IP Address Exclusion List screen appears.
5. Pressnfor next. The IP Address Inclusion List and IP Address Exclusion
List appears.
To delete an IP address or IP address range from the Exclusion list:
1. Enter2to delete an IP address from the Exclusion list.
2. Enter the number associated with the IP address or IP address range to be
deleted.
3. Press Enter. The IP address is deleted from the IP Address Exclusion List.
4. Press Enter. The IP Address Exclusion List screen appears.
5. Pressnfor next. The IP Address Inclusion list and IP Address Exclusion
list appears.
Note: You can add or delete as many IP addresses or IP address ranges as you
want.
iii. Enter n for next.
b. Enter2to disable IP Restricted Login, which sets it to OFF.IP Restricted Login:
OFFappears.
To disable IP Restricted Login:
Enter2to disable the IP Restricted Login. The IP Restricted Login is set to OFF.
48 Installing in-place on Linux
10. Enter n to go to the next screen. The configuration completes, and a message appears
indicating that HP SMH is successfully set up. The HP SMH service is stopped and started
automatically.
11. Verify HP SMH is configured and working properly by navigating to it and verifying that
it displays correctly.
Configuring HP SMH 49
50
9 Installing directly on Linux
Installing in-place on Linux Itanium
This chapter provides steps to install HP System Management Homepage (HP SMH) in-place
on Linux Itanium.
" Installation for Linux Itanium (page 51)
Installing HP SMH on Linux Itanium systems (page 51)
Configuring HP SMH (page 51)
The next chapter provides steps to install HP SMH in-place on Linux systems using the Linux
Deployment Utility.
" Installing HP SMH with preconfiguration (page 57)
Preconfiguring the HP SMH component (page 57)
Installing HP SMH as a single component (page 58)
" Installing HP SMH without preconfiguration (page 59)
Installation for Linux Itanium
The HP SMH installation for Linux enables you to silently install HP SMH on Itanium systems.
After the installation is complete, you can configure the HP SMH settings.
NOTE: To install HP SMH, you must be logged in as root user.
Installing HP SMH on Linux Itanium systems
To install HP SMH on Itanium systems, your system must meet the minimum requirements. For
more information regarding minimum requirements, see Chapter 2 Installation requirements .
In addition, you must have thehpsmh-2.x.x.-xx.linux.ia64.rpm.
To install HP SMH, enter the following command line:
rpm ivh hpsmh-2.x.x-xx-linux.ia64.rpm
A message appears indicating that HP SMH installed successfully with default configuration
values.
Configuring HP SMH
After HP SMH is installed, you can configure the settings. If you are migrating from Management
HTTP Server, the Management HTTP Server settings are retained. However, the retained settings
are configurable.
To configure HP SMH settings:
1. Enter the following command to start the configuration:
/opt/hp/hpsmh/smhconfig/hpSMHSetup.sh
The Welcome screen appears, indicating that you can configure security and access
parameters on the following screens.
2. The Welcome screen indicates that you can configure security and access parameters for HP
System Management Homepage and related HP web-based management tools.
Press Enter. The Operating System Groups screen appears.
Installing in-place on Linux Itanium 51
3. The Operating System Groups screen enables you to add operating system groups to HP
SMH.
Add or delete operating system groups in HP SMH. The following options are available:
a. To add groups:
i. At the prompt, enter1to add a group. The Add Operating System Groups screen
displays the operating system group lists.
Note: You can add up to five entries per group.
Enter one of the following options to assign the operating system group to the
Administrator Group List:
" Enter1for Administrator.
For example, to add admin1 to the Administrator operating system group:
A. Enter1for Administrator.
B. At the prompt,Enter the name of the operating system
group:enter admin1.
C. Press Enter. admin1 appears in the Administrator Group List.
D. Enter n to go to the next screen.
" Enter2for Operator.
" Enter3for User.
ii. Enter n to go to the next screen.
b. To delete a group:
i. Enter2to delete a group.
The following options are available:
" Enter1for Administrator. The Administrator Group List appears.
" Enter2for Operator. The Operator Group List appears.
" Enter3for User. The User Group List appears.
ii. At the prompt, enter1,2, or3.
iii. Enter the number next to the group name to be deleted. The group is deleted from
the group list.
Note: You can delete as many groups as you want by repeating this step.
iv. Press Enter when you are finished deleting to go to the next screen.
v. Enter n to go to the next screen. The Operating System Groups screen appears.
vi. Enter n to go to the next screen. The User Access screen appears.
4. Configure Local and Anonymous Access. The following options are available:
" Enter1to enable Anonymous Access.
Caution: HP does not recommend the use of anonymous access.
" Enter2to disable Anonymous Access.
" Enter3to disable Local Access.
" Enter4to enable Local Access - Anonymous. Local Access enables you to locally
gain access to HP SMH without being challenged for authentication. Any local user has
access limited to unsecured pages without being challenged for a username and
password.
Caution: HP does not recommend the use of local access unless your management
server software enables it.
" Enter5to enable Local Access - Administrator. This option grants full access to secure
and unsecure pages. Any user with access to the local console is granted full access.
52 Installing directly on Linux
5. Enter n to go to the next screen or enter p to go to the previous screen.
6. Enter n to go to the next screen. The Trust Mode screen appears.
7. Configure the HP SMH trust mode.
Enter 1for Trust by Certificate.
The line with 1 Trust by Certificate(selected) becomes yellow.
The following options are available: Trust by Certificate, Trust by Name, Trust All and
Modify Certificate List.
a. Trust by Certificate
i. To add a certificate file:
A. Enter1. You are prompted for the certificate location.
B. Enter the file path of the trusted certificates to be added to the Trusted
Certificates List. Press Enter when you are finished.
For example:
I. File: /home/ServerName/cert1.pem .
II. Press Enter. Thecert1.pemis added to the Trusted Certificates List.
If the certificate file does not exist, a message appears indicating that
/home/ServerName/cert1.pem does not exist.
C. You can add as many certificates as you want by repeating these steps. Press
Enter when you are finished adding certificate files.
ii. To import a certificate:
A. Enter2. You are prompted for the server name.
B. Enter the name or IP address of the HP Systems Insight Manager server and
press Enter. The certificate is retrieved and displayed.
The following options are available:
" Enter1to accept the certificate. The file is saved.
" Enter2to reject the certificate. The file is not imported.
C. Press Enter when you are finished. The imported certificates display in the
Trusted Certificates List. You can import as many certificates as you want
by repeating these steps.
D. Press Enter when you are finished importing certificate files.
iii. To delete a certificate:
A. Enter3. You are prompted to enter the number associated with the certificate
file to be deleted.
B. Enter the number of the certificate file to be deleted.
C. Press Enter when you are finished. You can delete as many certificate files as
you want by repeating these steps.
D. Press Enter when you are finished deleting certificate files.
Configuring HP SMH 53
b. Trust by Name
i. Enter2to Trust by Name.
The line with 2 Trust by Certificate(selected) becomes yellow.
ii. Enter4to Modify Server Name list.
To add an HP Systems Insight Manager server's certificate name:
A. Enter1. You are prompted to add an HP Systems Insight Manager server's
certificate name.
B. Enter the name of the certificate of HP Systems Insight Manager server to be
trusted and press Enter. The certificate name appears in the Trusted Server
Names list.
Note: You can add as many server certificate names as you want.
To delete a certificate name:
A. From the Server Name list, enter2.
B. Enter the number associated with the name of the certificate of HP SIM server
to be deleted. The HP SIM server's certificate name is removed from the Server
Name list.
iii. Enter n for next. The Trust Mode Settings screen appears.
c. Trust All
i. Enter3to Trust All.
The line with 3 Trust by Certificate(selected) becomes yellow.
ii. Enter n for next. The IP Binding screen appears.
d. Modify Certificate List
Enter4to Modify Certificate List.
8. Bind IP addresses that match a subnet and netmask.
The following options are available:
a. Enable IP Binding
i. Enter1to enable the IP Binding, which sets it to ON.IP Binding: ONappears.
ii. Enter n to go to the next screen.
The following options are available:
To add an IP address:
A. Enter1to add an IP address. You are prompted for the IP address.
B. Enter the IP address to be added.IP Address: YourIPAddress appears.
You are prompted for the netmask.
C. Enter the netmask.netmask: YourNetmask appears.
Note: You can add or delete as many IP addresses as you want.
To delete an IP address:
A. Enter2.
B. Enter the number of the IP address or netmask to be deleted. The IP address
or netmask is removed from the IP address or netmask list.
iii. Enter n to go to the next screen. The IP Restricted Login screen appears.
b. Disable IP Binding
i. Enter2to disable the IP Binding, which sets it to OFF.IP Binding: OFFappears.
ii. Enter n to go to the next screen or enter p to go to the previous screen. The IP
Restricted Login screen appears.
54 Installing directly on Linux
9. Configure HP SMH to restrict login access based on the IP address of the system from which
the login is attempted.
The following options are available:
a. Enter1to enable an IP Restricted Login, which sets it to ON. IP Restricted Login:ON
appears.
To enable the IP Restricted Login:
i. Enter1. IP Restricted Login is set to ON.
ii. Press n for next. The Set IP Address Restrictions screen appears.
To add IP addresses to the Inclusion List:
A. Enter1for Include Login Restriction IP Address.
B. Enter1for Add.
C. Enter the IP address or IP address range you want to add to the Inclusion List.
The IP address or IP address range appears under the IP Address Inclusion
List.
Note: You can add or delete as many IP addresses or IP address ranges as you
want.
To delete an IP address or IP address range from the Inclusion list:
A. Enter2.
B. Enter the number associated with the IP address or IP address range to be
deleted and press Enter. The IP address or IP address range is deleted from
the Inclusion List.
To add an IP address or IP address range to the Exclusion list:
1. Enter2for Exclude Login Restriction IP Address
2. Enter1to add an IP address to the Exclusion List.
3. Enter the IP address or IP address range to be added to the Exclusion List. The
IP address or IP address range is added in the IP Address Exclusion List.
4. PressEnter. The IP Address Exclusion List screen appears.
5. Pressnfor next. The IP Address Inclusion List and IP Address Exclusion
List appears.
To delete an IP address or IP address range from the Exclusion list:
1. Enter2to delete an IP address from the Exclusion list.
2. Enter the number associated with the IP address or IP address range to be
deleted.
3. Press Enter. The IP address is deleted from the IP Address Exclusion List.
4. Press Enter. The IP Address Exclusion List screen appears.
5. Pressnfor next. The IP Address Inclusion list and IP Address Exclusion
list appears.
Note: You can add or delete as many IP addresses or IP address ranges as you
want.
iii. Enter n for next.
b. Enter2to disable IP Restricted Login, which sets it to OFF.IP Restricted Login:
OFFappears.
To disable IP Restricted Login:
Enter2to disable the IP Restricted Login. The IP Restricted Login is set to OFF.
Configuring HP SMH 55
10. Enter n to go to the next screen. The configuration completes, and a message appears
indicating that HP SMH is successfully set up. The HP SMH service is stopped and started
automatically.
11. Verify HP SMH is configured and working properly by navigating to it and verifying that
it displays correctly.
56 Installing directly on Linux
10 Installing in-place on Linux using Linux Deployment Utility
This chapter provides steps to install HP System Management Homepage (HP SMH) in-place
on the Linux operating system using the Linux Deployment Utility.
" Installing HP SMH with preconfiguration (page 57)
Preconfiguring the HP SMH component (page 57)
Installing HP SMH as a single component (page 58)
" Installing HP SMH without preconfiguration (page 59)
The previous chapter provides steps to install HP SMH in-place on Linux x86 systems and x86_64
systems.
" Installation for Linux Itanium (page 51)
Installing HP SMH on Linux Itanium systems (page 51)
Configuring HP SMH (page 51)
Installing HP SMH with preconfiguration
The Linux Deployment Utility provides an easy and efficient method to upgrade and manage
system software. The utility enables you to deploy and maintain ProLiant Support Pack software
on local servers through use of the terminal window and on remote servers through use of the
ssh (secure shell) utility. The Linux Deployment Utility is shipped with the Linux ProLiant
Support Pack, which is available on the SmartStart CD. The Linux Deployment Utility enables
you to install components or ProLiant Support Packs in-place, but not remotely.
The Linux Deployment Utility parses the .XML files associated with each component and verifies
whether the installation of those components is supported on the specific environment. The
components that are supported for installation are listed with a status icon indicating whether
the component should to be installed, and whether it should be configured. Configuring or
preconfiguring the HP SMH component is optional.
Preconfiguring the HP SMH component
Note: All preconfiguration settings are saved in the component XML file.
To preconfigure the HP SMH component:
1. Run theinstall###.shscript. The HP ProLiant Linux Deployment Utility screen is
displayed asking you to wait while component XML files are parsed.
2. Under Component Name, select HP System Management Homepage for Linux.
3. Right-click on HP System Management Homepage for Linux and select Configure
Component. The Configuration Option screen is displayed.
4. In the Please enter the Operating System (OS) Group Names for Administrator level
access. (Max five names, separated by semicolon or space) field, enter the operating
system group name for administrator-level access.
Note: You can enter up to five operating system group names for administrator-level access.
Separate the group names with a semicolon (;) or space.
5. In the Please enter the Operating System (OS) Group Names for operator-level access.
(Max five names, separated by semicolon or space) field, enter the operating system
group name for operator-level access.
Note: You can enter up to five operating system group names for operator-level access.
Separate the group names with a semicolon (;) or space.
Installing HP SMH with preconfiguration 57
6. In the Please enter the Operating System (OS) Group Names for user-level access.
(Max five names, separated by semicolon or space) field, enter the operating system
group name for user-level access.
Note: You can enter up to five operating system group names for user-level access. Separate
the group names with a semicolon (;) or space.
7. In the Allow Local Access field, enterYESto allow local access orNOto disallow local
access.
8. Select the local access type, Anonymous or Administrator, from the Local Access Type
dropdown menu.
9. In the Allow Anonymous Access field, enterYESto allow anonymous access orNOto
disallow anonymous access.
10. Select the trust mode from the Trust Mode dropdown menu.
" If you select TrustByCert from the Trust Mode dropdown menu, enter the names of
the certificate files and separate multiple entries with a semicolon in the List of File or
Host names separated by semicolon field. For example,
cert.pem;cert2.pem;ServerName .
" If you select TrustByName from the Trust Mode dropdown menu, enter the names of
the trusted HP SIM servers' certificate and separate multiple entries with a semicolon
in the list of trusted Host Names field. For example,Server1;Server2.
11. In the IP Binding field, enterYESto enable IP Binding orNOto disable IP Binding.
12. In the IP Binding List field, enter the IP address and netmask pairs separated by semicolons.
For example,IPAddress1/Netmask1;IPAddress2/Netmask2.
13. In the Enable IP Restricted Login field, enterYESto enable IP restricted logins orNOto
disable IP restricted logins.
14. In the Enter include IP Addresses, or ranges field, enter the IP addresses or range of IP
address to be included.
15. In the Enter exclude IP Addresses, or ranges field, enter the IP addresses or range of IP
address to be excluded.
16. Click Save to save your configuration, or click Cancel to discard your configuration.
17. Click OK to close the HP ProLiant Linux Deployment Utility screen.
18. After preconfiguration is complete, installation can be initiated through the Linux Deployment
Utility as part of the complete ProLiant Support Pack or the single component can be installed
independent.
Installing HP SMH as a single component
You can install HP SMH independent of other components included in the ProLiant Support
Pack.
To install HP SMH as a single component:
1. Select all components except the HP SMH component.
2. Right-click all other components and select Do Not Install component.
3. Installs the HP SMH component with the configurations that are provided through the Linux
Deployment Utility.
For more information about using the Linux Deployment Utility, see the HP ProLiant Support
Pack and Deployment Utilities User Guide.
4. The HP SMH component can also be installed by invoking the following command from
the shell prompt:./install###.sh c hpsmh>version<.linux.i???.rpm.
58 Installing in-place on Linux using Linux Deployment Utility
Installing HP SMH without preconfiguration
You can install the HP SMH component without any configurations by clicking Install. You can
configure HP SMH settings at any time by logging into HP SMH with root privileges.
Installing HP SMH without preconfiguration 59
60
11 Initializing the software for the first time
After HP System Management Homepage (HP SMH) has been installed and configured for the
first time, a process to create a private key and corresponding self-signed Base64-encoded
certificate is initiated. This certificate is a Base64-encoded PEM file.
Key and certificate information
" In HP-UX, both public and private keys for HP SMH are stored in the
/var/opt/hpsmh/sslsharedirectory. The files are calledfile.pem(private key) and
cert.pem(server certificate).
" In Linux, both public and private keys for HP SMH are stored in the/opt/hp/sslshare
directory or/etc/opt/hp/sslsharedirectory in HP SMH 2.1.3 and later. The files are
calledfile.pemandcert.pem.
" In Windows, public and private keys are stored in the\hp\sslsharedirectory of the
system drive.
To protect the key, this subdirectory is only accessible to administrators if the file system
allows such security. For private key security reasons, HP highly recommends that Windows
installations of HP SMH be installed on New Technology File System (NTFS).
IMPORTANT: For Windows operating systems, the file system must be NTFS for the private
key to have administrator only access through the file.
If you feel that the private key has been compromised, the administrator can delete the
\hp\sslshare\cert.pemfile and restart the server. This action causes HP SMH to generate
a new certificate and private key.
NOTE: Certificate and private key generation only occur the first time HP SMH is started or
when no certificate and key pair exists.
A certificate from a certificate authority (CA), such as Verisign or Entrust, can be used to replace
self-generated certificates. These certificate and key files are shared with other HP Management
software, such as HP Systems Insight Manager.
Key and certificate information 61
62
12 Logging in and logging out of HP SMH
This chapter provides browser and command line instructions for logging in to and out of HP
System Management Homepage (HP SMH).
" Logging in with Windows XP (page 63)
" Logging in with Internet Explorer (page 63)
" Logging in with Mozilla and Firefox (page 65)
" Logging in from the HP-UX command line (page 65)
" Logging out (page 65)
Logging in with Windows XP
If HP SMH is installed on a Windows XP system, the following security option must be enabled
to log into HP SMH:
1. Select Control Panel Ò! Administrative Tools Ò! Local Security Policy. The Local Security
Settings dialog box appears.
2. Select Local Policies.
3. Select Security Options.
4. Right-click Network Access: Sharing and security model for local accounts and select
Properties. The Local Security Policy Setting dialog box appears.
Note: The Network Access item may be worded differently, depending on your
environment.
5. Select Classic - local users authenticate as themselves.
6. Click OK to save your settings and close the Local Security Policy Setting dialog box.
Logging in with Internet Explorer
To log in to HP SMH with Internet Explorer:
Logging in with Windows XP 63
1. Navigate tohttps://hostname:2381/.
To avoid an active scripting error, HP recommends that you add the HP SMH URL to Internet
Explorer's Trusted Sites.
To add HP SMH to Internet Explorer's Trusted Sites:
a. From Internet Explorer, click Tools Ò! Internet Options.
b. Click the Security tab. The Security tab appears.
c. Select the Trusted sites icon.
d. Click Sites.... The Trusted sites dialog box appears.
e. In the Add this website to the zone field, enterhttps://hostname:2381/and
click Add.
f. Click OK to save your changes and close the Trusted sites dialog box.
g. Click OK to close the Internet Options dialog box.
If you are using Internet Explorer to browse to an HP-UX system, then you can use port
2381 if you changed the default configuration to haveautostartdisabled andstart on
bootenabled. If you keep the default-installed configuration, you can use the following
URI:http://hostname:2301/
By default, HP-UX is installed with theautostartfeature enabled. A daemon listens on
port 2301 and only starts HP SMH on port 2381 when requested, then stops it again after a
timeout period. See the smhstartconfig(1M) command for more information.
You can find procedures on how to change the configuration variables in the previous
chapters of this guide.
2. The first time you browse to this link, the Security Alert dialog box appears, asking you to
indicate whether to trust the server. If you do not import the certificate, the Security Alert
appears every time you browse to HP SMH.
If you want to implement your own Public Key Infrastructure (PKI) or install your own
generated certificates into each managed system, you can install a certificate authority root
certificate into each browser to be used for management. If this is implemented, the Security
Alert dialog box does not appear. If the alert appears when you do not expect it, you might
have browsed to the wrong system. You can refer to the online help in your browser for
more information about installing the certificate authority root certificate.
If you are accessing this page through a link from HP Systems Insight Manager and the
Trust By Certificate option is enabled in HP SMH, the Automatically Import Management
Server Certificate option appears if trust has not been previously configured. For more
information regarding automatically importing the HP Systems Insight Manager certificate,
see the HP System Management Homepage Online Help.
3. Click Yes.
The Login page appears unless you have enabled Anonymous access, then the HP System
Management Homepage appears.
4. Enter the user name that is recognized by the operating system.
If you have not yet added user groups into HP SMH security settings, then users must log
in with an operating system account in the Administrators group for Windows or the
operating system group root (which in turn contains the user root by default) for HP-UX
and Linux. If the credentials cannot be authenticated, the user is denied access. In most cases,
the administrator on Windows and root on HP-UX or Linux have administrator access on
HP SMH.
5. Enter the password that is recognized by the operating system.
6. On HP-UX, click Sign In. On Linux and Windows, click Login. HP SMH appears.
64 Logging in and logging out of HP SMH
Logging in with Mozilla and Firefox
To log in to HP SMH with Mozilla and Firefox:
1. Navigate tohttps://hostname:2381/.
If you are using Mozilla or Firefox to browse to an HP-UX system, then you can use port
2381 if you changed the default configuration to haveautostartdisabled andstart on
bootenabled. If you keep the default-installed configuration, you can use the following
URI:http://hostname:2301/
By default, HP-UX is installed with theautostartfeature enabled. A daemon listens on
port 2301 and only starts HP SMH on port 2381 when requested, then stops it again after a
timeout period. See the smhstartconfig(1M) command for more information.
You can find procedures on how to change the configuration variables in the previous
chapters of this guide.
The first time you browse to the HP SMH URI, the Website Certified by an Unknown
Authority dialog box appears, asking you to indicate whether to trust the server. If you do
not select Accept this certificate permanently, the Website Certified by an Unknown
Authority dialog box appears every time you use a browser.
2. Click OK.
The Login page appears unless you have enabled Anonymous access, then the HP System
Management Homepage appears.
3. Enter the user name that is recognized by the operating system.
If you have not yet added user groups into HP SMH security settings, then users must log
in with an operating system account in the Administrators group for Windows or the
operating system group root (which in turn contains the user root by default) for HP-UX
and Linux. If the credentials cannot be authenticated, the user is denied access. In most cases,
the administrator on Windows and root on HP-UX and Linux have administrator access
on HP SMH.
4. Enter the password that is recognized by the operating system.
5. On HP-UX, click Sign In. On Linux and Windows, click Login. HP SMH appears.
Logging in from the HP-UX command line
You can verify whether the autostart daemon is running with the following command:
$ ps -ef | grep smh
root 1789 1 0 Mar 31 ? 0:00 /opt/hpsmh/lbin/smhstartd
If the daemon is not running, you can start it from the HP-UX command line using
/opt/hpsmh/lbin/hpsmh autostart, then use a web browser to navigate to
http://hostname:2301.
You can also use thesamwebcommand to automatically start the default browser in the main
HP SMH page.
After the daemon is running and the HP-UX Apache-based Web Server is started with autostart,
you can log in to HP SMH with either http://hostname:2301 or https://hostname:2381.
NOTE: If the autostart daemon is not configured (see thesmhstartconfig -a off -b
on), use the command/opt/hpsmh/lbin/hpsmh startinstead to start the HP-UX
Apache-based Web Server on ports 2301 (http) and 2381 (https).
Logging out
Select one of the following options:
Logging in with Mozilla and Firefox 65
" In the System Management Homepage banner, for HP-UX click Sign Out and for Linux and
Windows click logout.
" Close every instance of the web browser that you use to log in to HP SMH.
" You can stop HP SMH from the HP-UX command line:/opt/hpsmh/lbin/hpsmh stop
This will not stop the mini-daemonsmhstartd, but will stop the HP-UX Apache-based
web server. The next time you contact HP SMH through http://hostname:2301, the HP-UX
Apache-based web server will again start up on port 2381 (https). If autostart is configured,
the HP-UX Apache-based web server times out automatically after 30 minutes (default
setting).
For more information, go to the hpsmh(1m) manpage:man hpsmh.
66 Logging in and logging out of HP SMH
13 Uninstalling HP SMH
This chapter provides instructions on how to uninstall HP System Management Homepage (HP
SMH) from HP-UX, Linux, and Windows systems. It also provides instruction on how to uninstall
it manually.
" Uninstalling from an HP-UX system (page 67)
" Uninstalling from a Linux Itanium, x86 or x86_64 system (page 67)
" Uninstalling from a Windows system (page 67)
" Uninstalling from multiple Windows systems silently (page 67)
" Uninstalling manually for Windows and Linux systems (page 68)
" Uninstalling manually for HP-UX systems (page 69)
Uninstalling from an HP-UX system
To uninstall HP SMH on an HP-UX system, use the followingswremovecommand:
swremove -x enforce_dependencies=false SysMgmtHomepage
This is the recommended HP-UX method of uninstalling HP SMH.
Uninstalling from a Linux Itanium, x86 or x86_64 system
To uninstall HP SMH:
Run the following command:
rpm e hpsmh
Uninstalling from a Windows system
Use the Add/Remove Programs feature in Windows, and complete the following steps to remove
HP SMH:
1. Select Start Ò! Control Panel Ò! Add or Remove Programs.
2. Select HP System Management Homepage.
3. Click Remove. HP SMH is uninstalled.
Uninstalling from multiple Windows systems silently
You can write a script to uninstall HP SMH silently on multiple Windows systems simultaneously.
To uninstall HP SMH for Windows silently, you must use your existingsetup.issfile or you
must generate one before proceeding with the silent uninstall.
To uninstall silently using the CLI, use the following command:
setup.exe /s /removeonly /f1
Uninstalling from an HP-UX system 67
Uninstalling manually for Windows and Linux systems
Uninstalling manually duplicates the actions of the HP SMH uninstaller, which can be accessed
through Add/Remove Programs in the Control Panel. Use this procedure if you want to
completely uninstall HP SMH, and the uninstaller has been inadvertently removed or corrupted.
Note: Items marked if present are present if there is an existing HP SMH 2.0.1 or 2.0.2 installation.
CAUTION: All HP SMH configuration settings will be lost after uninstalling manually!
To manually uninstall HP SMH:
1. Stop the HP SMH service.
2. Remove the following directories and files on the system drive:
" \hp\hpsmh\csicon.ico
" \hp\hpsmh\_jvm (if present)
" \hp\hpsmh\certs
" \hp\hpsmh\conf
" \hp\hpsmh\data
" \hp\hpsmh\lib
" \hp\hpsmh\logs
" \hp\hpsmh\modules
" \hp\hpsmh\namazu
" \hp\hpsmh\session\
" \hp\sslshare\
For Linux, sslshare is located in/etc/opt/hp/sslshare
For Windows, sslshare is located in:\hp\sslshare
" For Linux you will need to remove the following additional files:
/usr/local/hp
/var/spool/opt/hp
a. If the HP Version Control Agent and/or the HP Version Control Repository Manager
is installed on the system, remove all files and directories under\hp\hpsmh\bin,
exceptlibeay32.dllandssleay32.dll.
b. If the Version Control Agent, Version Control Repository Manager, or both are not
installed on the system, remove the entire\hp\hpsmh\bindirectory.
3. Delete the following registry keys:
" \HKEY_LOCAL_MACHINE\SOFTWARE\Hewlett-Packard\System Management
Homepage
" \HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\System
Management Homepage(if present)
" \HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\
{3C4DF0FD-95CF-4F7B-A816-97CEF616948F}
" \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\System\HP
System Management Homepage
" \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SysMgmtHP
68 Uninstalling HP SMH
Uninstalling manually for HP-UX systems
This section describes how to manually uninstall HP SMH on an HP-UX system.
CAUTION: Manually uninstalling HP-UX SMH is not recommended.
When it is necessary to uninstall HP-UX SMH, HP recommends using theswremovecommand,
as described in Uninstalling from an HP-UX system (page 67).
The following procedure manually uninstalls HP SMH on an HP-UX system.
1. Stop the HP SMH service.
2. Remove (usingrm -rf) the following directories:
" /var/opt/hpsmh
" /opt/hpsmh/session
" /opt/hpsmh/certs
" /opt/hpsmh/cookies
" /opt/hpsmh/sslshare
" /opt/hpsmh/tmp
CAUTION: On HP-UX systems, do not remove all files under the/opt/hpsmhdirectory
because files for SMH HP-UX web applications also are stored there. Only remove the
directories listed above.
Also on HP-UX systems, the/etc/opt/hp/sslsharedirectory is used by HP SIM and
should not be removed.
Uninstalling manually for HP-UX systems 69
70
Index
Linux IA_32, 43
A Linux x86_64, 43
audience, 5 operating systems, 11
ProLiant Remote Deployment Utility, 33
C requirements, 11, 15
console install RPMs on AMD64 and EM64T, 13
Linux, 43 RPMs on Itanium, 14
console Installation RPMs on x86, 13
Linux system preparation, 51 web browsers, 12
Windows, 27, 33, 37
D Itanium RPMs, 14
document organization, 5
documentation, 6 L
Linux
F install, 43
features Linux Deployment Utility install, 57
new, 5 Linux IA_32
install, 43
G Linux Itanium-based system
getting started, 17 system preparation, 51
Linux x86_64
H install, 43
HP Smart-Update Manager logging in, 63
install, 37 logging out, 63
HP SMH
HP Smart-Update Manager install, 37 M
HP-UX install, 19 manpages, 6
install requirements, 11, 15 media, 15
Linux Deployment Utility install, 57
Linux install, 43, 57 N
logging in, 63 new functionality, 5
logging out, 63
media, 15 O
operating systems, 11 OpenSSH, 37
overview, 9 operating systems, supported, 11
ProLiant Remote Deployment Utility install, 33 overview
RPMs on AMD64, 13 HP SMH, 9
RPMs on EM64T, 13
RPMs on Itanium, 14 P
RPMs on x86, 13 product overview, 9
setup, 17 ProLiant Remote Deployment Utility
software, 15, 61 install, 33
uninstall, 67 publication history, 7
web browsers, 12
web sites, 15 R
Windows install, 27, 33, 37 remove HP SMH, 67
HP-UX remove HP SMH on Linux x86, 67
install, 19 remove HP SMH on Windows, 67
requirements
I install, 11
initial setup, 17 verify, 15
initialize software, 61 resources, 6
install RPMs, supported, 13, 14
HP Smart-Update Manager, 37
HP-UX, 19 S
Linux, 57 service and support, 8
71
setup, 17
software, 15, 61
T
typographic conventions, 5
U
uninstalling, 67
W
web browsers, supported, 12
web sites, 15
Windows
install, 27
install HP Smart-Update Manager, 37
install ProLiant Remote Deployment Utility, 33
72 Index
Wyszukiwarka
Podobne podstrony:
HP System Management Homepage Installation Guide (September 2008)
EbookBot Installation Guide
install guide
Installation Guide
VCDS 10 6 Instalation Guide EN
c20h?8h?0h?0h installation guide
ATRIS Technik (2012 2) Install Guide
EGX300 Installation Guide (English)
Installation Guide for WindowsXP
TOYOTA TIS Installation Guide(English)
ISCOM2924GF 4GEL Quick Installation Guide (A)
HP Pavilion dv6000 series i instalacja windows XP
Installation Guide
Mac OS X Installation Guide
gmax tempest install guide
Autodata 3 40 install guide
więcej podobnych podstron