token ring 2 uhuwb5rsciuhry47r4hx5jvceq6hnfn2jruzryi uhuwb5rsciuhry47r4hx5jvceq6hnfn2jruzryi UHUWB5RSCIUHRY47R4HX5JVCEQ6HNFN2JRUZRYI
Token-Ring mini-HOWTO: Hardware requirements
2. Hardware requirementsMake sure that you have a Token Ring card that is supported by this driver.
Currently the only cards that are supported are those
that use the Tropic chipset.Cards that I personally know to work are:3Com 3C619B Token Link3Com 3C619C Token LinkHyperRing Classic 16/4IBM Turbo 16/4 ISA adapter**IBM Token Ring Auto 16/4 ISA adapterIBM Token Ring Auto 16/4 adapter /AIBM Token Ring 16/4 adapter /AIBM Token Ring adapter /AIBM Token Ring adapter II (4 Megabit only)IBM 16/4 ISA Token Ring card (16bit)IBM 16/4 ISA Token Ring card (8bit)Madge Blue (100% IBM compatable)All other 100% IBM compatable shared-ram adapters should also work fine.
Please let us know if you find differently.It is recommended that you use 16KB Shared RAM for the time being.Cards that may cause problems:IBM Turbo 16/4 ISA adapterThis adapter will, in fact, work fine with the Linux token ring driver.
However, you MUST run the card in Auto 16/4 compatability mode.
The simplest way to set this is to use the LANAID disks
sent with the card and run the command:
LANAIDC /FAST=AUTO16
You should then use LANAIDC or LANAID
to configure the card according to documentation.Token-Ring Network 16/4 Adapter IIThis adapter will NOT work.
Do not confuse this card with the IBM Token Ring adapter II (4mbit)
which does. It is a DMA/Busmaster adapter for ISA.3Com TokenLink Velocity ISAYou may or may not get this one to work.
I have had reports of people running it without problems,
and others who get errors left and right.PCI adaptersCurrently, none of the IBM PCI adapters are supported.IBM Auto LanStreamer 16/4 Token-Ring PCI AdapterCurrently not supported, but being worked on.
This driver should be Full Duplex as well when completed.
r