SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
PETROL X
ALFA ROMEO GTV 99 DIESEL
MAKE MOD. YEAR.
ALARM/SIREN Position the compact alarms and the sirens in the engine compartment, near the
shock absorber, driver s side. Pass the cables through the original rubber sleeve
POSITION
located on the right in the windshield wiper, driver s side.
CENTRAL UNIT POSITION Position the modular systems and the modules under the dashboard, driver s side.
POWER SUPPLY + 30: connect to the 4 mm2 RED wire located in the multiway connector in the fuse
box.
- 31: connect with a cable terminal directly to the car body.
IGNITION WIRE + 15/54: connect to the 1 mm2 LIGHT BLUE/RED wire located in the wiring
harness behind the sill cover, driver s side.
DIRECTION INDICATORS Connect to the LIGHT BLUE and LIGHT BLUE/BLACK wires located in the wiring
harness behind the sill cover, driver s side.
ELECTRIC WINDOWS Controls with mixed polarity
Front window, driver s side:
cut the 2 mm2 VIOLET/YELLOW wire located in the wiring harnes coming out of
the door, driver s side.
Front window, passenger s side:
cut the 2 mm2 WHITE/GREEN and GREEN/BLACk wires located on the coming
out of the door, driver s side. Refer to diagram nr.117.
CENTRAL DOORS LOCKING Negative control signal
Connect to the 1 mm2 WHITE wire (unlock) and BLUE wire (lock) located in the
wiring harness coming out of the door, driver s side.
IMMOBILISATION POINT Fuel pump
Cut the 1,5 mm2 VIOLET/BLACK wire located in the 2 way connector of the inertial
switch, behind the bulkhead, driver s side.
STARTER +50: Cut the 3 mm2 VIOLET/BLACK wire located in the wiring harness coming out
of the connector of the ignition key.
BONNET SWITCH Connect to the 1 mm2 WHITE/BLACK wire located in the wiring harness coming
out of the 2 way connector, driver s side.
DOORS SWITCH Connect to the 1 mm2 GREY/YELLOW wire located in the wiring harness behind
the sill cover, driver s side.
BOOT SWITCH Connect to the 1 mm2 PINK/BLACK wire located in the wiring harness behind the
sill cover, driver s side.
algtv99gbb.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
FITTING DIAGRAM N°117
Diagram to make the windows locking on
ALFA GTV - 145 - 146
Art. 2980
+30 RED
Ground BLACK
(antitheft) BROWN
WHITE/GREEN VIOLET/YELLOW
GREEN GREY
GREEN/ BLACK GREY/BLACK
(positive on closing) (positive on closing)
M
Motor 1 Motor 2
M
LIGHT BLUE/BLACK
(Negative on closing) LIGHT BLUE
GREEN/BLACK
Descriptions of the possibilities for the application of the module Art. 2980
A diagram
" The wire of the window motor has a negative polarity at rest that becomes positive operating the control on closing
(Motor 2).
B diagram
" The wire of a motor has a negative polarity at rest that becomes positive operating the control on closing, the other
motor has both the wires with positive polarity at rest (Motor 1).
C diagram
" Both the wires of the motors (Motor 1 and Motor 2) have a positive polarity at rest.
ATTENTION: the wires must be cut complying with the controls towards the motor and the switch.
algtv99gbb.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
Wyszukiwarka
Podobne podstrony:
166 T S 1998 petrol NOGT 2004 petrol NOPT CRUISER 2001 petrol NOA4 2001 petrol NOX 5 2001 petrol NOA2 2004 2°sem 1 petrol NO145 1997 petrol NO530 2003 petrol NOA3 1998 petrol NOA6 1998 petrol NONEON 1996 petrol NOT T 2000 petrol NOwięcej podobnych podstron