MSP430x13x, MSP430F14x, MSP430F15x, MSP430F16x Code Examples TI COM FET140 demolist C


  • fet140_1.c - Software Toggle P1.0

  • fet140_adc12_01.c - ADC12, Sample A0, Set P1.0 if A0 > 0.5*AVcc

  • fet140_adc12_02.c - ADC12, Using the Internal Reference

  • fet140_adc12_03.c - ADC12, Sample A10 Temp, Set P1.0 if Temp ++ ~2C

  • fet140_adc12_04.c - ADC12, Extend Sampling Period with SHT Bits

  • fet140_adc12_05.c - ADC12, Using an External Reference

  • fet140_adc12_06.c - ADC12, Repeated Sequence of Conversions

  • fet140_adc12_07.c - ADC12, Repeated Single Channel Conversions

  • fet140_adc12_08.c - ADC12, Using 10 External Channels for Conversion

  • fet140_adc12_09.c - ADC12, Sequence of Conversions (non-repeated)

  • fet140_adc12_10.c - ADC12, Sample A10 Temp and Convert to oC and oF

  • fet140_adc12_11.c - ADC12, Single Channel Rpt Mode, TA1 as Sample Trigger

  • fet140_clks.c - Basic Clock, Output Buffered SMCLK, ACLK and MCLK

  • fet140_dac12_01.c - DAC12_0, Output 1.0V on DAC0

  • fet140_dac12_02.c - DAC12_1, Output 2.0V on DAC1

  • fet140_dac12_03.c - DAC12_0, Output Voltage Ramp on DAC0

  • fet140_dma_01.c - DMA0, Repeated Burst to-from RAM, Software Trigger

  • fet140_dma_02.c - DMA0, Repeated Block To P1OUT, TACCR2, DCO

  • fet140_dma_03.c - DMA0, Repeated Block UART1 9600, TACCR2, ACLK

  • fet140_dma_04.c - DMA0, Block Mode UART1 9600, 32kHz ACLK

  • fet140_dma_05.c - DMA0, Rpt'd Blk to DAC0, Sine Output, TACCR1, DCO

  • fet140_dma_06.c - DMA2, Rpt'd Blk to DAC1, 8-Bit Sine, TBCCR2, DCO

  • fet140_dma_07.c - DMA0/1, Rpt'd Blk to DAC0/1, Sin/Cos, TACCR1, XT2

  • fet140_dma_08.c - DMA0, Rpt'd Blk, I2C Master Interface to DAC8571

  • fet140_dma_09.c - DMA0, ADC12 A10 Block Xfer to RAM, TBCCR1, DCO

  • fet140_dma_10.c - DMA0, ADC12 A10 Block Xfer to Flash, TBCCR1, DCO

  • fet140_dma_11.c - DMA0/1, ADC12 A10 Block Xfer to MPY/RAM, TBCCR1, DCO

  • fet140_dma_12.c - DMA1/0, Blk Mode UART1 9600 Auto RX/TX String, ACLK

  • fet140_dma_13.c - DMA0/1/2, USART0 UART 9600 Full-Duplex Transcvr, ACLK

  • fet140_dma_14.c - DMA0/1/2, USART0 SPI 3-Wire SPI Master P1.x Exchange

  • fet140_dma_15.c - DMA0/1/2, USART0 SPI 3-Wire SPI Slave P1.x Exchange

  • fet140_dma_16.c - DMA0/1/2, USART1 SPI 3-Wire Master P1.x Exchange

  • fet140_flashwrite_01.c - Flash In-System Programming, Copy SegA to SegB

  • fet140_flashwrite_02.c- Flash In-System Programming, BlockWrite
  • fet140_fll_01.c - Basic Clock, Implement Auto RSEL SW FLL

  • fet140_fll_02.c - Basic Clock, Implement Cont. SW FLL with Auto RSEL

  • fet140_hfxt2.c - Basic Clock, MCLK Sourced from HF XTAL XT2

  • fet140_hfxtal.c - Basic Clock, MCLK Sourced from HF XTAL

  • fet140_i2c_01.c - I2C, Master Intf. to TMP100, Set P1.0 if Temp > 28C

  • fet140_i2c_02.c - I2C, Master Interface to PCF8574, Read/Write

  • fet140_i2c_03.c - I2C, Master Interface to DAC8571 in Repeat Mode

  • fet140_i2c_04.c - I2C, Master Reads from MSP430 Slave

  • fet140_i2c_05.c - I2C, Slave Transmits to MSP430 Master

  • fet140_i2c_06.c - I2C, Master Transmits to MSP430 Slave RX

  • fet140_i2c_07.c - I2C, Slave Reads from MSP430 Master

  • fet140_i2c_08.c - I2C, Master Writes Multiple Bytes to MSP430 Slave

  • fet140_i2c_09.c - I2C, Master Reads from MSP430 Slave in Repeat Mode

  • fet140_i2c_10.c - I2C, Slave Writes to MSP430 Master RX in Repeat Mode

  • fet140_i2c_12.c - I2C, Master Interface to DAC8571, Write

  • fet140_i2c_13.c - I2C, Master Interface to DAC8571, Read/Write

  • fet140_i2c_14.c - Switch Between UART0 & Master I2C Transmitter

  • fet140_ta0-ta1_uart2400.c-Timer_A software UART 2400 Echo using CCR0 and CCR1, 32kHz ACLK
  • fet140_UART_2400_SPI_master_poll.c-USART0, SPI/UART 2400 alternating transmission, 32kHz ACLK
  • fet140_i2c_15.c - I2C, Slave TMP100 Emulation II

  • fet140_lpm3.c - Basic Clock, LPM3 Using WDT ISR, 32kHz ACLK

  • fet140_nmi.c - Basic Clock, Configure RST/NMI as NMI

  • fet140_rosc.c - DCOCLK Biased with External Resistor Rosc

  • fet140_spi0_03.c - USART0, SPI Interface to HC165/164 Shift Registers

  • fet140_spi0_04.c - USART0, SPI Interface to TLV5616 DAC

  • fet140_spi0_05.c - USART0, SPI 3-Wire Master

  • fet140_spi0_06.c - USART0, SPI 3-Wire Slave

  • fet140_spi0_07.c - USART0, SPI Full-Duplex 3-Wire Master P1.x Exchange

  • fet140_spi0_08.c - USART0, SPI Full-Duplex 3-Wire Slave P1.x Exchange

  • fet140_spi1_03.c - USART1, SPI Interface to TLV5616 DAC

  • fet140_spi1_04.c - USART1, SPI Full-Duplex 3-Wire Master P1.x Exchange

  • fet140_svs_01.c - SVS, POR @ 2.5V Vcc

  • fet140_ta_01.c - Timer_A, Toggle P1.0, CCR0 Cont. Mode ISR, DCO SMCLK

  • fet140_ta_02.c - Timer_A, Toggle P1.0, CCR0 Up Mode ISR, DCO SMCLK

  • fet140_ta_03.c - Timer_A, Toggle P1.0, Overflow ISR, DCO SMCLK

  • fet140_ta_04.c - Timer_A, Toggle P1.0, Overflow ISR, 32kHz ACLK

  • fet140_ta_05.c - Timer_A, Toggle P1.0, CCR0 Up Mode ISR, 32kHz ACLK

  • fet140_ta_06.c - Timer_A, Toggle P1.0, CCR1 Cont. Mode ISR, DCO SMCLK

  • fet140_ta_07.c - Timer_A, Toggle P1.0-3, Cont. Mode ISR, DCO SMCLK

  • fet140_ta_08.c - Timer_A, Toggle P1.0-3, Cont. Mode ISR, 32kHz ACLK

  • fet140_ta_09.c - Timer_A, Toggle P1.0-3, Cont. Mode ISR, HF XTAL ACLK

  • fet140_ta_10.c - Timer_A, Toggle P1.1/TA0, Up Mode, DCO SMCLK

  • fet140_ta_11.c - Timer_A, Toggle P1.1/TA0, Up Mode, 32kHz ACLK

  • fet140_ta_12.c - Timer_A, Toggle P1.1/TA0, Up Mode, HF XTAL ACLK

  • fet140_ta_13.c - Timer_A, Toggle P1.1/TA0, Up/Down Mode, DCO SMCLK

  • fet140_ta_14.c - Timer_A, Toggle P1.1/TA0, Up/Down Mode, 32kHz ACLK

  • fet140_ta_15.c - Timer_A, Toggle P1.1/TA0, Up/Down Mode, HF XTAL ACLK

  • fet140_ta_16.c - Timer_A, PWM TA1-2, Up Mode, DCO SMCLK

  • fet140_ta_17.c - Timer_A, PWM TA1-2, Up Mode, 32kHz ACLK

  • fet140_ta_18.c - Timer_A, PWM TA1-2, Up Mode, HF XTAL ACLK

  • fet140_ta_19.c - Timer_A, PWM TA1-2, Up/Down Mode, DCO SMCLK

  • fet140_ta_20.c - Timer_A, PWM TA1-2, Up/Down Mode, 32kHz ACLK

  • fet140_ta_21.c - Timer_A, PWM TA1-2, Up/Down mode, HF XTAL ACLK

  • fet140_ta_22.c - Timer_A0, Capture of ACLK/8 using SMCLK

  • fet140_ta_23.c - Timer_A, Toggle P1.0, Overflow ISR, HF XTAL ACLK

  • fet140_ta_24.c - Timer_A, Toggle P1.0, CCR0 Up Mode ISR, 32kHz INCLK

  • fet140_tb_01.c - Timer_B, Toggle P1.0, CCR0 Cont. Mode ISR, DCO SMCLK

  • fet140_tb_02.c - Timer_B, Toggle P1.0, CCR0 Up Mode ISR, DCO SMCLK

  • fet140_tb_03.c - Timer_B, Toggle P1.0, Overflow ISR, DCO SMCLK

  • fet140_tb_04.c - Timer_B, Toggle P1.0, Overflow ISR, 32kHz ACLK

  • fet140_tb_05.c - Timer_B, Toggle P1.0, CCR0 Up Mode ISR, 32kHz ACLK

  • fet140_tb_06.c - Timer_B, PWM TB1-6, Up Mode, DCO SMCLK

  • fet140_tb_07.c - Timer_B, PWM TB1-6, Up Mode, 32kHz ACLK

  • fet140_tb_08.c - Timer_B, PWM TB1-2, Up Mode, HF XTAL ACLK

  • fet140_tb_09.c - Timer_B, PWM TB1-2, Up/Down Mode, DCO SMCLK

  • fet140_tb_10.c - Timer_B, PWM TB1-2, Up/Down Mode, 32kHz ACLK

  • fet140_tb_11.c - Timer_B, PWM TB1-2, Up/Down Mode, HF XTAL ACLK

  • fet140_uart01_0115k.c - USART0, UART 115200 Echo ISR, HF XTAL ACLK

  • fet140_uart01_0115k_2.c - USART0, UART 115200 Echo ISR, XT2 HF XTAL ACLK

  • fet140_uart01_02400.c - USART0, Ultra-Low Pwr UART 2400 Echo ISR, 32kHz ACLK

  • fet140_uart01_09600.c - USART0, UART 9600 Echo ISR, HF XTAL ACLK

  • fet140_uart01_09600_2.c - USART0, Ultra-Low Pwr UART 9600 Echo ISR, 32kHz ACLK

  • fet140_uart01_19200.c - USART0, UART 19200 Echo ISR, HF XTAL ACLK

  • fet140_uart01_19200_2.c - USART0, UART 19200 Echo ISR, XT2 HF XTAL ACLK

  • fet140_uart02_09600.c - USART0, Ultra-Low Pwr UART 9600 Echo ISR, 32kHz ACLK

  • fet140_uart02_19200.c - USART0, Ultra-Low Pwr UART 19200 Echo ISR, 32kHz ACLK

  • fet140_uart03_09600.c - USART0, UART 9600 Echo ISR, 32kHz ACLK + DCO

  • fet140_uart03_19200.c - USART0, UART 19200 Echo ISR, 32kHz ACLK + DCO

  • fet140_uart04_09600.c - USART0, UART 9600 Echo ISR, No XTAL, Rosc DCO Only

  • fet140_uart04_19200.c - USART0, UART 19200 Echo ISR, No XTAL, Rosc DCO Only

  • fet140_uart05_09600.c - USART0, Ultra-Low Pwr UART 9600 Echo ISR, 32kHz ACLK

  • fet140_uart06_09600.c - USART0, Ultra-Low Pwr UART 9600 String, 32kHz ACLK

  • fet140_uart07_09600.c - USART0, Ultra-Low Pwr UART 9600 RX/TX, 32kHz ACLK

  • fet140_uart08_09600.c - USART0, UART 9600 Full-Duplex Transceiver, 32K ACLK

  • fet140_uart11_0115k_2.c - USART1, UART 115200 Echo ISR, XT2 HF XTAL SMCLK

  • fet140_uart11_02400.c - USART1, Ultra-Low Pwr UART 2400 Echo ISR, 32kHz ACLK

  • fet140_uart11_19200_2.c - USART1, UART 19200 Echo ISR, XT2 HF XTAL SMCLK

  • fet140_uart15_09600.c - USART1, Ultra-Low Pwr UART 9600 Echo ISR, 32kHz ACLK

  • fet140_wdt_01.c - WDT, Toggle P1.0, Interval Overflow ISR, DCO SMCLK

  • fet140_wdt_02.c - WDT, Toggle P1.0, Interval Overflow ISR, 32kHz ACLK

  • fet140_wdt_03.c - WDT, Toggle P1.0, Interval Overflow ISR, HF XTAL ACLK



    • Wyszukiwarka

    Podobne podstrony:
    MSP430 Directives
    MSP430 Opcodes
    MSP4302dMacros
    MSP4302dDependent
    MSP4302dChars
    msp430f110
    msp430f1101a
    MSP430 Syntax
    msp430g2553
    msp430f123
    MSP4302dExt
    LCD MSP430
    MSP430 Profiling Capability
    MSP430
    msp430f133
    MSP4302dRegs
    MSP430 wprzykładach cz3
    msp430f1122
    MSP430 Floating Point

    więcej podobnych podstron