P68 30-0241 06
Removing. installing
1 Paneling (A-pillar)
2 Headliner
3 Retaining elips
Remove edge guards in area of paneling (1 and 7)
2
Remove handle
Remove paneling (7)
115589035900
Use long wedge to press paneling (1) out of retaining clip (2)
Force off paneling (1) from the retaining clamps (3) and puli snap-m tabs (4) out of the parcel shelf to the front
To completely remove the paneling (1): i
Remove rear seat cushion
AR91 12-P-1700F
*BA91 40-P-1001-01A
Remove screw (5) on belt end fitting (6) of rear seat belt and withdraw belt strap from the paneling (1)
Install in the reverse order
iw 30024^c«
1 |
Paneling (B-pillar) |
6 |
Pawi |
2 |
Paneling (longitudinal member) |
7 |
Bolts |
3 |
Retaining elips |
8 |
Key |
4 |
Seat belt end fitting |
9 |
Mount |
5 |
Bott |
Removal | |||
1 |
Puli off edge guard in area of panelling (1) | ||
2 |
Unhook retaining elips (3) from panelling (1) with screwdriver | ||
3 |
Puli panelling (1) up out of longitudinal member panelling (2) | ||
4 |
Unscrew bolt (5) on seat belt end fitting (4) | ||
5 |
Puli seat belt out of paneling (1) and put down paneling (1) | ||
El |
Installation | ||
6 |
Check retaining elips (3. 4 each) at top of B-pillar | ||
7 |
Guide seat belt end fitting (4) through opening in paneling (1) | ||
8 |
Insert paneling (1) into insert channel in longitudinal member paneling (2) | ||
9 |
Insert boli (7) and pawi (6) into mount (9) and key (8) on paneling (1) | ||
10 |
Clip paneling (1) onto retaining elips (3) | ||
11 |
Screw seat belt end fitting (4) onto driver's seat with bolt (5) so that it can pivot |
0" |
*BA91 40-P-1001-01A |
12 |
Install edge guard on B-pillar | ||
13 |
Check adjustable upper belt guide fitting on B-pillar for proper function |
It should be posstble to adjust and arrest the upper belt guide fitting on the B-pillar in 3 positions (top/middle/bottom) |
2
3
4
Remove handle
Remove paneling (7)
*115589035900
Use long wedge to press paneling (1) out of retaining clip (2)
5
orce off paneling (1) from the retaining amps (3) and puli snap-m tabs (4) out of © parcel shelf to the front
To completely remove the paneling (1):
Remove rear seat cushion
Remove screw (5) on belt end fitting (6) of rear seat belt and withdraw belt strap from the paneling (1)
AR91 12-P-1700F *BA91 40-P-1001-01A
7
Install in the reverse order
Pt»300?-1&09
5 Screw
6 Belt end fitting
7 Wheel house covering
Romoving. installing
Remove edge guards in area of paneling (1 and 7)