A2 1 4 (75 koni)

18008

Audi A2 1,4 2001-06 Engine codę: BBY

Impoitant notę

Replacement lnteiv<il Guide

Check For Engine Doimige

Repair Times - his

Special Tools

Special Piecautions

Removal - Timing Belt

Installation - Timing Beit

Removal - Exhaust Camshaft Drive Belt

Installation - Exhaust Camshaft Drive Belt

Installation

1. Ensure locking tool fitted to camshaft sprockets [4], Tool No.T10016 [5].

2. Fit drive belt in clockwise direction, starting at top of inlet camshaft sprocket.

3. Ensure belt is taut between sprockets on non-tensioned side.

4. Tum tensioner pulley clockwise until pointer in position as shown [17].

5. Install:

o Tensioner pulley [16]. o Tensioner pulley bolt [15].

6. Tighten tensioner pulley bolt finger tight [15].

NOTĘ: Ensure lug [18] in basepiate is located in cylinder head hole.

7. Tum tensioner anti-clockwise [19] until pointer [20] aligned with lug [18] in basepiate.

8. Tighten tensioner pulley bolt to 20 Nm [15].

9. Fit timing belt as described previously.

10. Remove locking tool from camshaft sprockets [4]. Tool No.T10016 [5].

11. Tum crankshaft two turns clockwise to TDC on No.1 cylinder. Ensure timing marks on crankshaft sprocket aligned [10].

12. Ensure locking tool can be inserted into camshaft sprockets [4], Tool No.T10016 [5].

13. Ensure pointer [20] aligned with lug [18] in basepiate.

14. Ifnot: Repeat tensioning procedurę.

15. Apply firm thumb pressure to belt at^. Pointer [20] and lug [18] in basepiate must move apart.

16. Release thumb pressure from belt at^.

17. Tum crankshaft two turns clockwise to TDC on No.1 cylinder.

18. Ensure pointer [20] aligned with lug [18] in basepiate.

19. Install components in reverse order of removal.