suziki rm12529
FUEL SYSTEM 11-7
REED VALVE
REMOVAL
• Remove the carburetor. (d/“ 11 -3)
• Remove the intake pipę and reed valve.
INSPECTION
• Inspect the reeds for damage.
• Inspect the reed valve stoppers for damage.
• Inspect the valve seat rubber for damage.
NOTĘ:
Be careful not to damage the removed reed valve assembly.
REASSEMBLY
Reverse the sequence of removal. • Tighten the intake pipę bolt to
H Intake pipę bolt: 4
Wyszukiwarka
Podobne podstrony:
38557 Suzuki RM1259 FUEL SYSTEM 11-7REED VALVEREMOVAL • Remove the carburetor. (£
suziki rm12527 FUEL SYSTEM 11-5CLEANING After cleaning, reassemble theo Replace the removei A WARNI
suzuki rm25002 FUEL SYSTEM 9-15REMOVAL AND REMOUNTING • Remove the carburetor. (d
67687 Suzuki RM2502 FUEL SYSTEM 9-15REMOVAL AND REMOUNTING * Remove the carbureto
Suzuki RM1253 FUEL SYSTEM 11-1FUEL
Suzuki RM1257 FUEL SYSTEM 11-5CLEANING CAUTION Do not use a wire to clean the jets or passageways.
suziki rm12513 10-4 TRANSMISSION AND CRANKSHAFTCRANKCASE SEPARATION • Remove the engine sprocket sp
suziki rm12556 15-4 FRONT AND REAR BRAKES • Remove the reservoir cap. • &nb
suziki rm12576 FRONT FORK AND STEERING 16-9 • Remove the compression damper unit from the sub-tank.
89 TransAlp Manual Fuel System 4 9 FUELSYSTEMN/ACUUM CHAMBER Remove the four screws and vacuum chamb
suziki rm12528 11-6 FUEL SYSTEM 11-6 FUEL SYSTEM NEEDLE VALVE INSPECTION If foreign matter is caugh
46383 Suzuki RM1258 11-6 FUEL SYSTEM 11-6 FUEL SYSTEM osai NEEDLE VALVE INSPECTION If foreign matte
suziki rm12540 ELECTRICAL SYSTEM 13-3IGNITION SYSTEMIGNITION SYSTEM PEAK VOLTAGE INSPECTION •
więcej podobnych podstron