suzuki rm25007

suzuki rm25007



COOLING SYSTEM 10-5

IMPELLER AND GEAR SHAFT

• Inspect the impeller and gear shaft for damage.

WATER PUMP BEARING

Inspect the inner race play of the water pump bearing while it is in the water pump housing. Rotate the inner race by hand to inspect for abnormal noise and smooth rotation. If abnormal noise occurs or if rough movement is noted, replace the water pump bearing with a new one.

BEARING REPLACEMENT

• Remove the water pump bearing with the

|S) 09921-20220: Bearing remover sef \

CAUTH

W "\ V.' \v"

Replace the removed3>eafing

with a new one.

• Install a new bearing with the special tool. (S) 09913-70210: Bearing installer set

OIL SEAL

Visually inspect the oil seal for damage. If any damages are found, replace the oil seal with a new one.

•    Remove the oil seal.

CAUTION



-

-— Play

\

-j- piav

jO

LUJ

r 1 2

V

_

UJ-





1

Replace the removed oil seal with a new one.

2

   Apply THREAD LOCK to the outer surface of the oil seal. tS 99000-32050: THREAD LOCK “1342”


Wyszukiwarka

Podobne podstrony:
73666 Suzuki RM2507 COOLING SYSTEM 10-5IMPELLER AND GEAR SHAFT * Inspect the impeller and gear shaf
44367 Suzuki RM2505 COOLING SYSTEM 10-3COOLING CIRCUIT INSPECTIONCOOLING CIRCUIT Before removing th
suzuki rm25009 COOLING SYSTEM 10-7 • Install the dowel pins © and new gasket (D. _CAUTION_ Use a ne
Suzuki RM2509 COOLING SYSTEM 10-7 ♦ Install łhe dowel pins (D and new gasket _CAUTION_ Use a new ga
suzuki rm25005 COOLING SYSTEM 10-3 COOLING SYSTEM 10-3 u/ićtibn with a radiator cap pres-COOLING CI
suzuki rm25000 FUEL SYSTEM 9-13CARBURETOR SOLENOIDREMOVAL AND INSPECTION •    Remove
67687 Suzuki RM2502 FUEL SYSTEM 9-15REMOVAL AND REMOUNTING *    Remove the carbureto
Suzuki RM2500 FUEL SYSTEM 9-13 FUEL SYSTEM 9-13CARBURETOR SOLENOIDREMOVAL AND INSPECTION ♦  &n
suzuki rm25002 FUEL SYSTEM 9-15REMOVAL AND REMOUNTING •    Remove the carburetor. (d
Suzuki RM250? FUEL SYSTEM 9-1FUEL SYSTEM CONTENTS CONSTRUCTION
70766 Suzuki RM250? FUEL SYSTEM 9-9 Jet
41913 Suzuki RM2508 15-22 FRONT FORK AND STEERING • Clamp the axle holder with a vise. Protect the

więcej podobnych podstron