suzuki rm25016
EXHAUSTVALVE 11-7
• Temporarily tighten the bolts ®.
• Turn the cap 180° clockwise and tighten the bolts to the spec-ified torque.
Q Exhaust valve return spring cap bolt:
4.5 Nm (0.45 kgf-m, 3.3 Ib-ft)
• Install the exhaust side valve (0), stopper pin © and new gas-ket ©.
• Tighten the bolt ® to the specified torque.
[1] Exhaust side valve bolt: 4.5 N m (0.45 kgf-m, 3.3 Ib-ft)
NOTĘ:
* The yellow painted side valve must be installed on right side. The white painted side vaive must be installed on left side.
* Install the exhaust side vaive cam.
Exhaust side valve cai
Exhaust side val
Install the exhaust side valve cam with aligning the emboss @ with the pin of the exhaust side valve.
Turn the exhaust side valve cam approx. 35°.
In above position, the pin behind the exhaust side valve cam engages the groove ® on the exhaust valve cam rod.
Install the pin.
• Install the spacer © with the hollow faced outside.
• Install the left exhaust side valve in the same manner as the right exhaust side valve.
NOTĘ:
Make surę that the spacer is the same level with the cylinder. If not so, the exhaust side vaive cam isn’t installed correctly.
Wyszukiwarka
Podobne podstrony:
11709 Suzuki RM2504 EXHAUSTVALVE 11-5 ♦ Remove the exhaust valve shaft ®. ♦
Suzuki RM2506 EXHAUSTVALVE 11-7 ♦ Temporarily tighten the bolts ®. ♦
suzuki rm25014 EXHAUSTVALVE 11-5 EXHAUSTVALVE 11-5 Remove the retainer © and the exhaust main valve
suzuki rm25018 EXHAUSTVALVE 11-9 Disassemble the governer assembly by pushing down the retainerINSP
72111 Suzuki RM2508 EXHAUSTVALVE 11-9 • Disassemble the governer assembly by pushing down the retai
Suzuki RM2500 EXHAUSTVALVE 11-1EXHAUST VALVE -CONTENTS- CONSTRUCTłON
suzuki rm25014 19-8 SERVICE DATA TIGHTENING TORQUE CHART For other bolts and nuts not listed in the
Suzuki RM250!4 19-8 SERVICE DATA TIGHTENING TORQUE CHART For other bolts and nuts not listed in the
suzuki rm25009 COOLING SYSTEM 10-7 • Install the dowel pins © and new gasket (D. _CAUTION_ Use a ne
suzuki rm25077 16-4 REAR SUSPENSIONREBOUND DAMPING FORCE ADJUSTMENT • Turn the ad
suzuki rm25082 REAR SUSPENSION 16-9 • Inspect the spacers and dust seals for dama
suzuki rm25099 ELECTRICAL SYSTEM 17-3 Measure the ignition system peak voltage in the following pro
20536 Suzuki RM250? 9-12 FUEL SYSTEMINSPECTION • Inspect the following parts for d
więcej podobnych podstron