suzuki rm25036
14-4 FRONT AND REAR BRAKES
• Remove the reservoir cap.
• Connect a transparent tubę to the bleeder valve and set the other end into a receptacle.
• Pour brake fluid up to the UPPER linę.
• Pump the brake lever/pedal until air bubbles stop coming out from the reservoir.
• Hołd the brake lever/pedal in the squeezed position.
• Open the bleeder valve and tighten the bleeder valve.
• Release the brake lever/pedal.
• Repeat this sequence until air bubbles stop coming out from the bleeder valve.
NOTĘ:
Do not release the brake lever/pedal while the bleeder valve is opened.
• Replenish brake fluid to the UPPER linę when the brake fluid level drops below LOWER linę.
• Tighten the air bleeder valve.
H Air bleeder valve: 7.5 N-m (0.75 kgf-m, 5.5 Ib-ft)
• Pour brake fluid up to the UPPER linę.
• Reassemble the reservoir cap.
BRAKE FLUID REPLACEMENT
• Remove the reservoir cap. (d/^aboye)
• Connect a transparent tubę to the bleeder valve and set the other end into a receptacle. (d/^aboye)
• Loosen the bleeder valve and pump the brake lever/pedal until brake fluid stops coming out from the bleeder valve.
• Pour brake fluid into the reservoir.
• Bleed air from the brake system, (d/^aboye)
• Reassemble the reservoir cap.
Wyszukiwarka
Podobne podstrony:
suziki rm12556 15-4 FRONT AND REAR BRAKES • Remove the reservoir cap. • &nb
Suzuki RM2508 14-6 FRONT AND REAR BRAKESBRAKE DISC INSPECTION • Measure the front and rear brake di
suzuki rm25038 14-6 FRONT AND REAR BRAKESBRAKE DISC INSPECTION • Measure the front and rear brake d
suzuki rm25040 14-8 FRONT AND REAR BRAKESREAR CALIPER REMOVAL AND DISASSEM-BLY •
87472 Suzuki RM2504 14-2 FRONT AND REAR BRAKESCONSTRUCTION H 10 N-m (1.0 kgf-mt 7.0 Ib-ft) H 23 N-m
33596 Suzuki RM2500 14-8 FRONT AND REAR BRAKES 14-8 FRONT AND REAR BRAKES #REAR CALIPER REMOVAL AND
suzuki rm25044 14-12 FRONT AND REAR BRAKES • Remove the diaphragm. •
86489 Suzuki RM1254 EsSH Iw—rm ESH 15-12 FRONT AND REAR BRAKES • Remove the brake lever adjuster re
więcej podobnych podstron