suzuki rm25085
16-12 REAR SUSPENSION
OIL REPLACEMENT PROCEDURĘ
• Remove the rear shock absorber unit from the frame. Clean and dry it. (£71 216-7)
• Remove the spring from the rear shock absorber unit. (£7216-8)
NOTĘ:
Inspect the rear shock absorber unit for oil leak.
Tum the rebound damping force adjuster screw counterclock-wise until it stops, so that the rear suspension oil can be poured easily.
• Remove the valve cap. Press the valve with a screwdriver to bleed out nitrogen gas.
A WARNING
Releasing high pressure gas from the rear shock absorber unit can be hazardous.
Never perform any servicing until the nitrogen gas pressure has been released from the rear shock absorber unit. When releasing the gas pressure, place a rag over the gas valve and use the tip of a sc r-driver etc. to press the valve. Do not use your fingi o depress the gas valve, and direct the vafve a1 your face and body.
Remove the compression shock absorber.
bm the rear
• Place a drain pan under the rear shock absorber unit.
• Move the rod and drain the oil completely.
Push the valve core again to equalize the bladder to atmo-spheric pressure.
Wyszukiwarka
Podobne podstrony:
suzuki rm25083 16-10 REAR SUSPENSION • Apply grease to the needle roller bearings
suzuki rm25087 16-14 REAR SUSPENSION • Reinstall the compression adjuster assembl
suzuki rm25088 REAR SUSPENSION 16-15 • Vise the rear shock absorber unit in inver
suzuki rm25093 16-20 REAR SUSPENSION • Tighten the rear cushion lever nut to the
25868 Suzuki RM2501 16-18 REAR SUSPENSION Jtć* Remove the spacers. Dust seal Washer Thrus
53233 Suzuki RM1257 REAR SUSPENSION 17-7 REAR SUSPENSION 17-7 OIL REPLACEMENT PROCEDURĘ * &
Suzuki RM2507 16-14 REAR SUSPENSION • Reinstall the compression adjuster assembly
Suzuki RM2508 REAR SUSPENSION 16-15 ♦ Vise the rear shock absorber unit in invert
Suzuki RM2503 16-20 REAR SUSPENSION 16-20 REAR SUSPENSION • Tighten the rear cush
więcej podobnych podstron