wheel

Wheel construction

Outside edge of wheel has a "crown" to it.

Wheel is wider in the middle than at the rims.

Widest part of wheel should be 40 cm in dameter or slightly less. If you have a soft metal tape measure, check the circumference to be 125.6 cm.

Main wheel disk should be roughly 3.0 cm thick.

Use good quality plywood, but it doesn't have to be the fancy birch plywood.

Add flanges to bring the middle of the gear to about 4.2 cm in thikness.

1 3/8" or 4 cm holes, 11 cm from center. These holes are to make it easier to turn the wheel by hand. Also use them to put bar clamps through when gluing the flanges on.

Wyszukiwarka

Podobne podstrony:
trim Dust shielding trim Trim on front and back srewed the outside edges of plywood. Trim screwed to
00214 5151d685820d3809856989a212338cd 216 Baxley Introduction The usual assumption underlying stati
usage in New Zealand. A less detailed overview of the NZ table of radio spectrum allocations is give
ERROR: The path /users/xxyyzz/Downloads/Cheatsheet.xlsx is invalid because it is not in the list of
H 60! The M60D machinę is locked in the stowed position just forward of the crew chief s seat. The c
95 Anthropogenic changes of water conditions.. production have considerably reduced water consumptio
44111 S20C 409120813140 The passage of time and interaction betwecn different forms is visible in na
04 PALESTINE IN THE TIME OF JESUS PALESTYNA W CZASACH JEZUSA 103aZarephftth, Caesarea GAUI.A NITIS
table underside Underside of table top 0.5 x 2 x 9 cm błock of wood forms lip to slide under table.
the G valley The Goulburn Valley The Goulburn Valley is situated in the south-east corner of the Aus
27 (449) T F0 3434RE-I9    -2- The onginal signcd copies of thcse RPF waivcrs are fil
OCiiZK Friend of SCIENTIX Ośrodek Edukacji Informatycznej SEVENTH SCIENCE PROJECTS WORKSHOP IN THE F

więcej podobnych podstron