Suzuki RM1258
FRONT FORK AND STEERING 16-11
FRONT FORK AND STEERING 16-11
• \
/
SLIDE BUSHING AND GUIDE BUSHING
Inspect the “teflon coating metals” (slide bushing and guide bushing) for wear or damage. If they are worn or damaged, replace them with new ones.
Inspect the metal particles on the teflon coating metals”. If they are not clean, clean them with a nylon brush and fork oil.
REASSEMBLY
NOTĘ:
* Cfean all fork parts before reassembling.
* Replace the O-rings, oil seal and dust seal with the new ones.
* Apply specified front fork oil when installing the O-rings, slide bushing, guide bushing, damper unit and other sliding parts.
INNER TUBĘ y'V
♦ Apply front fork oil to the oil seal lip and the diist seal
* Cover the inner tubę with a plastic film. \ \ V \ \ <
• Install the following parts to thejpner tubę: x\ \\ \ V>
New dust seal ® \ \\ \
Stopper ring ®
New oil seal
CAUTlON
Scratches on the oil seat lip can cause oil leaks.
When installing the seal, place a plastic film over the bushing attachment groove and edges of the inner tubę to avoid damage to the seal lip.
NOTĘ:
The side of the oil seal that has a mark should face the dust seal.
• Remove the plastic film and then install the seal retainer ®. guide bushing ® and slide bushing ®.
• Clean the parts and keep them free from dust.
NOTĘ:
Inspect the bushings for burrs. If there is a burr. remove it with a knife, taking care not to peei off the teflon coating. If the bushings have a large crack or excessive play after installing them, replace them with the new ones.
• Insert the inner tubę into the outer tubę.
\ \
\ \ i i
Wyszukiwarka
Podobne podstrony:
Suzuki RM1254 FRONT FORK AND STEERING 16-7 ♦ With the outer tubę compressed by hands, remove the sp
49847 Suzuki RM1254 FRONT FORK AND STEERING 16-17 ♦ Tighten the fork upper clamp
Suzuki RM1250 FRONT FORK AND STEERING 16-3HANDLEBAR CONTROLS H 25 N m (2.5 kgf-m, 18.0 Ib-ft) Acihe
Suzuki RM1252 FRONT FORK AND STEERING 16-5DISASSEMBLY • Set rebound and compressi
Suzuki RM1256 FRONT FORK AND STEERING 16-9 ♦ Remove the compression damper unit from the sub-tank.
Suzuki RM1250 FRONT FORK AND STEERING 16-13 FRONT FORK AND STEERING 16-13 ♦ Apply
28178 Suzuki RM1252 FRONT FORK AND STEERING 16-15 FRONT FORK AND STEERING 16-15 \ V- ♦ Clamp the ax
27882 Suzuki RM1255 FRONT AND REAR WHEELS 14-1FRONT AND REAR WHEELS -CONTENTS CONSTRUCTłON
więcej podobnych podstron