Suzuki RM1250

FRONT FORK AND STEERING 16-13

♦    Apply fork oil to the O-rings and bushing on the compression damper unit.

♦    With the damper rod held immovab!e in fully extended posi-tion, gently install the compression damper unit to the sub-tank.

* Clamp the bottom (fiat part) of the sub-tank with a vise.
CAUTION		n
Do not clamp the sub-tank too tight.		_ - i
♦ Tighten the compression damper unit to the specified torque.		r $ «
H Compression damper unit: 30 N m (3.0 kgf-m, 21.5 Ib-ft)
	WVł \ y m

. **\ ^s-

\ \

* Tighten the locknut by hand completely.

♦ With the damper rod held in vertical position, compress the damper rod fully to discharge an excess of oil.

CAUTION

Protect the inner rod end with a rag when compress-ing the damper rod.

NOTĘ:

Set the compression damper setting to the softest.

Wyszukiwarka

Podobne podstrony:
suziki rm125
80 FRONT FORK AND STEERING 16-13 •    Apply fork oil to the O-rings and
suzuki rm250
66 15-20 FRONT FORK AND STEERING •    Apply fork oil to the O-rings and
63648 Suzuki RM125? CLUTCH 7-5CLUTCH PLATĘ REASSEMBLY ♦    Apply transmission oil to
87424 Suzuki RM125 1 REAR SUSPENSION 17-11REASSEMBLY ♦    Apply the rear suspension o
Suzuki RM250b 5-8 CLUTCHCLUTCH PLATĘ •    Apply transmission oil to the drive plates
suziki rm125
21 10-12 TRANSMISSION AND CRANKSHAFT •    Apply transmission oil to the
suziki rm12501 REAR SUSPENSION 17-11REASSEMBLY •    Apply the rear suspension oil to
Suzuki RM2505 11-6 EXHAU$TVALVE 11-6 EXHAU$TVALVE and •    Apply transmission oil to
suzuki rm250
15 11-6 EXHAUSTVALVE •    Apply transmission oil to the exhaust valve sh
Suzuki RM1254 FRONT FORK AND STEERING 16-7 ♦ With the outer tubę compressed by hands, remove the sp
49847 Suzuki RM1254 FRONT FORK AND STEERING 16-17 ♦    Tighten the fork upper clamp

więcej podobnych podstron