Suzuki RM1259

REAR SUSPENSION 17-9

♦ Reinstall the compression adjuster assembly.

H Compression adjuster assembly:

30 N m (3.0 kgf-m, 21.5 Ib-ft)

♦ Fili the rear shock absorber unit with nitrogen gas to 981 kPa (9.8 kgf/cnT, 139.5 psi).

♦ Tighten the gas valve cap.

♦ Reinstall the spring. (CD^M-4)

A WARNING

Use of flammable gas for pressuring the rear shock absorber unit can be hazardous. Flammable gas such as gas welding oxygen can cause a fire hazard.

Use nitrogen gas. If nitrogen gas is not available, com-pressed air free from water can be substituted.

A WARNING

Applying too much pressure to the rear shock absorber unit may rupture the rear shock absorber unit. _ \ S

.y \ \

Be surę to fili the rear shock absorber unit to the spec-

•** \ \ _/ '

\ V'

\ c

..y\

...A

ified pressure. f \ \

-:-:-U—

C ^N \ V\

\ \ \

CAUTION \ V\\ \

-r-^^-V-7—

\ \ V

—=-y-

DISASSEMBLY AND INSPECTION

* Clean and dry the rear shock absorber.

* Remove the spring from the rear shock absorber, {dr"17-4)

* Tum the rebound damping force adjuster to the softest posi-tion.

* Press the valve with a screwdriver to bleed out nitrogen gas. ((TT" 17-7)

* Remove the compression adjuster assembly and drain the oil. (0=17-7)

Riding the motorcycle with ąbńormal gaś pressure can damage the rear shock absorber unit. Low gas pressure can resuit iiroi] leakage. Abnormal gas pressure cannot provide nprmąl riear shock absorber unit performance. ^v--

Be surę to fili the rear shock absorber unit to the spec-ified pressure.

Suzuki RM1259

Suzuki RM1259

\ c

DISASSEMBLY AND INSPECTION

Suzuki RM1259

Suzuki RM1259