Suzuki RM125‘
7-4 CLUTCH
7-4 CLUTCH
IKHl
CLUTCH PLATĘ INSPECTION
• Measure the drive piąte thickness.
Drive piÄ…te thickness Service Limit: 2.42 mm (0.095 in)
†09900-20101: Vernier calipers
Inspect the drive plates for wear? distortion and discoloration.
Bssn
Measure the driven piÄ…te claw width.
Driven piÄ…te claw width Service Limit: 13.05 mm (0.514 in)
09900-20101: Vernier calipers
Measure the driven piÄ…te distortion.
Driven piÄ…te distortion Service Limit: 0.15 mm (0.006 in)
09900-20803: Thickness gauge
iK5n
> w \ \ ,
• Inspect the driven plates forwearand discoloration.
\
*
/
DATA
CLUTCH SPRING INSPECTION
• Measure the clutch spring free length.
Clutch spring free length Service Limit: 37.8 mm (1.49 in)
09900-20101: Vernier calipers
NOTĘ:
Replace five clutch springs together even if only one spring is beyond the service limit.
CLUTCH PUSH ROD INSPECTION
• Inspect the clutch push piece, bearing and push rod for wear and damage.
• Inspect the bearing for smooth movement.
Wyszukiwarka
Podobne podstrony:
Suzuki RM125? CLUTCH 7-3CLUTCHCLUTCH PLATĘ REMOVAL ♦ Drain transmission oil. (d?12
63648 Suzuki RM125? CLUTCH 7-5CLUTCH PLATĘ REASSEMBLY ♦ Apply transmission oil to
Suzuki RM1251 13-4 ELECTRICAL SYSTEMIGNITION COIL INSPECTION • Remove the seat an
Suzuki RM250Y CLUTCH 5-5 CLUTCH 5-5 DATAINSPECTIONDRIVE PLATĘ • Inspect the drive
23166 Suzuki RM125? CLUTCH 7-7PRIMARY DRIVEN GEAR ASS Y INSPEC-TION ♦ Inspect the clutch sleeve hub
Suzuki RM125? CLUTCH 7-1CLUTCH -CONTENTS CONSTRUCTÅ‚ON
69642 Suzuki RM125? 7-6 CLUTCH • Replace the O-ring with a naw ona. •
74125 Suzuki RM125? 7-2 CLUTCHCONSTRUCTIONCLUTCH H 4.5 N-m (0.45 kgf-m, 3.3 Ib-ft) H 70 Nrn (7.0 kgf
Suzuki RM125? 7-8 CLUTCH 7-8 CLUTCH m-v iron • Tighten the clutch sleeve hub nut with the special to
Suzuki RM250W CLUTCH 5-3REMOVALCLUTCH PLATĘ ♦ Drain transmission oil. (C7"2-9
więcej podobnych podstron