tmta9

Slits for fitchets, slasbes for sleeves,

These slits (Surcotes, Fig 5; Gowns, Fig 18) are worked on the finished garment. Put the garment on the wearer and marle the planned position of the slit with pins, if possible on the straight grain of the fabric.

Take off the garment and check the length and position of the slits match on both sides, and that all layers of fabric are lying correctly. Tack round the position of each slit - like a giant buttonhole - stitching through all layers. Cut the slit inside the tacking. Oversew or blanket stitch the raw edges, or turn in narrow edges and stitch. For finishing lined edges see Pl. 1. On sleeves the slash can be bound (Fig 9) or edged with fur, p.53.

Platę 1. Lined edge finished in stab stitch

Lined garments are normally finished by turning in the raw edges together and hand-stitching close to the folded edge. This gives a fiat, firm edge on necklines, euffs, hems and head-wear as well as on slit openings.

49

Wyszukiwarka

Podobne podstrony:
tmta9 15 20 cm 15. Open sleeve for Figs 12 & 8 left To plan the construction lines and sleeve h
tmta9 b. Style for Fig 4c This is the best style for soled hose and has a one-piece sole, with no s
Japan 197 3.2    Testing procedurę For weak soils, weights are placed on the rod
72792 tmta9 Man s basie short cote 4. Pattern layout for Fig 3 The cote shown is planned on 2.4 m o
79721 tmta6 r 21. Sleeve for Fig 18 A tapered sleeve with pleats at the shoulder, drafted in two st
64439 tmta9 Wimples The wimple was a covering for the throat worn by most women in the 13th century
52407 tmta9 25. Bodice and collar for Fig 24 Bodice - Tracę the bodice Błock to waist only. Draw a
tmta7 22 SP 20 cm 22. Sleeve for larger armhole This method of adapting the sleeve Błock from Fig 2
tmta9 o LU > oo SELYEDGES 4. Fuli pattern and layout for Fig 2 The patterns are shown on 150 cm

więcej podobnych podstron