MR293R19066 1
FITTING THE RADIO
With the ignition switched off, unclip the radio oover from the dasbboard. Separate the aerial cable from it.
Connect the special radio harness:
- part number: 77 01 419 0^0 for fitting the radio with front speakers;
- part number: 77 01 420 375 for fitting the radio with front and rear speakers;
- part number: 77 01 421 556 for the PIONEER radio;
to the red MIC connector on the righthand aide in the radio housing (1).
Secure the metal sleeve supplied with the set in the radio housing.
If the radio has the earlier type of face DIN 75500 use raounting part number:
77 01 409 085.
Screw in the locking pin supplied or a 12.3 mm diameter rubber pin whioh mu3t be 165 ras away from the bearing face so as to hołd the rear part.
Conneot the harness mentioned above and the aerial oable (2) to the radio.
The 3 mm terminal supplies a permaneot + . It is advi$able to insulate it if it is not used.
Fit the radio set in place, puahing the harness to the righthand side, towards the back of the housing.
92016
Wyszukiwarka
Podobne podstrony:
89 TransAlp Manual Electric Starter 3 ELECTRIC STARTERSTARTER MOTORREMOVAL Awarning • With the igni
41791 MR293R19069 1 FITTING THE TWEETERS IM THE ENDS OF THE DASHBOARD Reraove the two 3 mm x 15 ser
MR293R19074 1 FITTING THE TOWING ATTACHMENT Remove the emergency wheel (the shield stays in place).
78440 MR293R19071 1 FITTING THE 165 n«n DIAHETER SPEAKERS IN THE DOORS In the front doors, tum the
MR293R19068 1 FITTING THE 100 nm D1AMF.TER SFEAKEBS IN THE EHDS OF THE DASHBOARD Remove the two 3 r
ignition switch ESSENTIAL 1NDIVIDUAL COMPONENTSIGNITION SWITCHThe ignition switch (I) is belo w the
89 TransAlp Manual Lights Instraments Switches 6 LIGHTS/INSTRUMENTS/SWITCHESREMOVAL NOTĘ • You can
CDR500 You can remove the CD from the unit as described above, even wtienthe radio is switched
więcej podobnych podstron