20536 Suzuki RM250

20536 Suzuki RM250



9-12 FUEL SYSTEM

INSPECTION

•    Inspect the following parts for damage: Jet needle

Throttle valve Float

•    Inspect the following jets for clogging: Main jet

Slow jet Starter jet Power jet

•    Inspect the needle valve for wear.

♦ Measure the float height with a vernier caliper. To measure the float height, tilt the carburetor until the float tip just con-tacts the float valve.

E5S5S Standard float height: 6.5 ±1.0 mm (0.26 ± 0.04 in)

REASSEMBLY AND REMOUNTING

Reassemble the carburetor in the reverse order oKremgyak

attention to the following pints:    \ k \ \ \\^) v

\ X X \ >

NOTĘ:    / /......\ ’-•>, >

Fit the projection of throttle vśivę..coliar ip the groove of cable hoićer.    ^ J

NOTĘ:

Set the throttle position sensor guide roHer as shown when installing the throttle valve into the carburetor body.





Wyszukiwarka

Podobne podstrony:
69818 Suzuki RM1255 12-6 COOLING SYSTEM • Inspect the bearing for smooth inner race movement. 12-6
Suzuki RM1255 12-6 COOLING SYSTEM • Inspect the bearing for smooth inner race movement. 12-6 COOLIN
89 TransAlp Manual Cooling System 5 4 COOLING SYSTEMINSPECTION Inspect the thermostat visually for d
42791 Suzuki RM250? 94 FUEL SYSTEM As shown below, each of the asterisk (*) marked parts is located
suzuki rm25001 9-14 FUEL SYSTEM 9-14 FUEL SYSTEM 14 - 6 kQTHROTTLE POSITION SENSORINSPECTION • Disc
70714 Suzuki RM250? 9-10 FUEL SYSTEMCARBURETORREMOVAL AND DISASSEMBLY •    Remove the
72010 Suzuki RM2501 9-14 FUEL SYSTEMTHROTTLE POSITION SENSORINSPECTION • Disconnect the throttle po
suziki rm12535 12-6 COOLING SYSTEM • Inspect the bearing for smooth inner race movement. • Remove t
suzuki rm25082 REAR SUSPENSION 16-9 •    Inspect the spacers and dust seals for dama
78795 Suzuki RM1257 12-8 COOLING SYSTEM •    Replace the water pump case gasket with
54423 Suzuki RM250 2-6 PERIODIC MAINTENANCESPARK PŁUG Inspect the spark pług condition. electrode c
Suzuki RM1257 12-8 COOLING SYSTEM •    Replace the water pump case gasket with a new
46902 Suzuki RM2506 10-4 COOLING SYSTEMWATER PUMP •    Drain the engine coolant. (CZ

więcej podobnych podstron