A2 1 6 FSI (110 KONI)

Audi A2 1,6 FSI 2002-06 Engine codę: BAD

Impoit.iot notę

Repl.icement lnteiv<il Guide

Check Foi Engine D.im.ige

Rep.iii Times • his

Speci.il Tools

Special Piec.iutions

Remov.il - Timing Belt lnst.ill.ition - Timing Belt

Remov.il - Exh«mst C.imsh.ift Diive Belt

Inst.ill.iti on

1. Ensure locking tools fitted to camshaft sprockets [8]. Tool No.T10074.

2. Fit drive belt in clockwise direction, starting at top of inlet camshaft sprocket.

3. Ensure belt is taut between sprockets on non-tensioned side.

NOTĘ: Ohseive direction of rot.ition m.irks on belt.

4. Tum tensioner pulley clockwise until pointer in position as shown [18].

5. Install:

o Tensioner pulley [17]. o Tensioner pulley bolt [16].

6. Tighten tensioner pulley bolt finger tight [16].

NOTĘ: Ensure lug [19] in h.isepi.ite is located in cylindei he.id hole.

7. Tum tensioner anti-clockwise [20] until pointer [21 ] aligned with lug [19] in baseplate.

8. Tighten tensioner pulley bolt to 20 Nm [16].

9. Fit timing belt as described previously.

10. Remove locking tools from camshaft sprockets [8].

11. Tum crankshaft two turns clockwise to TDC on No.1 cylinder. Ensure timing mark aligned [7].

12. Ensure locking tools can be inserted into camshaft sprockets [8].

13. Ensure pointer [21 ] aligned with lug [19] in baseplate.

14. If not: Repeat tensioning procedurę.

15. Apply firm thumb pressure to belt at^. Pointer [21] and lug [19] in baseplate must move apart. If not: Replace tensioner pulley.

16. Release thumb pressure from belt at^.

17. Tum crankshaft two turns clockwise to TDC on No.1 cylinder.

18. Ensure pointer [21 ] aligned with lug [19] in baseplate.

19. Install components in reverse order of removal.