21165 Introduzione
INTRODUCTION
In the Middle Ages, before the fuli development of modern firearms, soldiers fought with swords, bows-and-arrows, battle-axes and other similar weapons. Special high-ranking soldiers called knights fought for their king or other lord to whom they owed their loyalty. In battle (or in the contests called jousts) they rode on horseback, fought with swords and lances (in a joust the object was simply to use the lance to unseat the mounted opponent), and, for protection, wore metal armor and carried shields.
From the pieces in this book you can construct a paper replica of an English knight as he would have appeared around the year 1416, just after the battle of Agincourt, in which the English fought the French on French soil. This was an episode of the Hundred Years' War (1337-1453), a long-drawn-out struggle between England and France for possession of certain territories in what sińce then has remained part of France.
The armor worn by our knight consists of a combination of metal piąte and chain mail (interlinked metal rings). Over a chain-mail skirt and metal-plate-covered torso, he wears a cloth jupon, bearing the heraldic devices of King Henry V of England, well known to audiences and readers of Shake-speare's plays. The smali helmet he wears is called a bascineł, over which the great hełm, or larger helmet, is placed. The lance he carries is used to attempt to unseat an opponent on horseback. The sword in his scabbard (an extra, unsheathed, sword is also provided here) is for use in closer combat or when fighting unmounted.
The tools you will need to make the knight are (l) scissors;
(2) a hobby knife, such as an X-ACTO knife with a #11 blade;
(3) white glue, such as Elmer's or Sobo; (4) a tool for scoring, such as a duli paring knife or butter knife; (5) a ruler or other firm straight-edged object; and (6) a tool, such as a spoon or popsicle stick, that you can use to press the pieces firmly together when they have been glued.
Before beginning to put together the pieces, study the cover photograph and the diagrams to see how the pieces are supposed to fit together. Also read through the instructions before cutting out anything. Now examine the individual parts. You will notice that many pieces have tabs that are to be folded and glued to other pieces (each of these tabs has a dot on it). Your work will be neater if you score the lines along the tabs before you make the fold. Do this by tracing along the lines with a scoring tool (as mentioned above), using a ruler or other straightedge as a guide. Press hard enough to make a slight groove in the paper, but not so hard that you cut through it. (Some tabs, like those on the shaft of the lance, work better when reverse-scored, that is, scored on the underside of the paper.)
Carefully cut out the pieces one at a time, as you need them. Before gluing any pieces together, be surę that they are the correct ones and that they fit. When you are satisfied that the pieces are in their proper places, carefully glue them together. When applying glue to a tab, apply it only to the tab, not the receiving surface. Do not use too much glue—it will seep out and cause a mess. Keep a damp tissue or sponge handy so that you can ąuickly wipe glue away if you get any where you don't want it. For neater results, use a spoon or similar tool to press down on and smooth out the parts that you have just glued. Make surę the glue is dry before you handle glued pieces.
Now you may begin assembling the knight. Start by scoring, cutting out and gluing together the front and rear pieces for the mail skirt. Before you glue them together, glue the tabs of each separate piece in place. To give these pieces curvature it is helpful to puli the inside over the edge of a table before gluing the tabs in place. This may also be done with any of the other pieces for the knight that are curved in any way. Next, cut out and form the breast- and backplate, and then glue it to the mail skirt. Reverse-score the tabs on the body insert and glue this piece inside the mail skirt, with the tabs, pointing downward, just out of sight along the edge.
Now set aside the torso you have just formed, and assemble the legs and leg armor. Begin with the left and right greaves (or you may assemble all the parts of one leg at a time). Be surę to glue the leg inserts in place (similar to the gluing in of the body insert) before gluing the cuisses to the greaves, the next step. Form and glue together the soles and sollerets next, and carefully place the straps and spurs over the sollerets, gluing together the two sides of each spur around the back of each solleret. Glue the greaves to the inside of the assembled foot pieces. Be surę all the parts of the legs are lined up, as shown in the diagrams. When you are satisfied with the alignment of the legs, assemble the knee cops and glue them in place around the knees.
Next assemble the arms, starting with the rerebraces and vambraces. Glue the cuffs around the vambraces (with the seams facing in toward where the body will be) before gluing in the gauntlets. To give proper shape to the hands, score along the knuckles of the gauntlets; also score and fold in the inside strip of the index fingers (next to the thumbs), gluing the little tabs in place to hołd the shape. The elbow cops are similar in form and function to the knee cops; each, however, is formed of only one piece. Glue these in place, and then set aside the arms.
Next assemble the bascinet (showing the knight's face). The body is formed of one piece and the cap of two pieces glued together. Glue the assembled cap to the top of the body piece, and then set aside the bascinet. If you do not plan to glue the great hełm in place permanently, cut out and form the coronet and glue it just under the top edge of the body of the bascinet, over the knight's eyes. (With the great hełm glued in place, the coronet cannot be seen and is therefore not necessary.)
The great hełm is assembled in a manner similar to that of the bascinet. Notice that it has a body formed of two pieces, as well as a bottom rim that is glued in place after the cap and body have been assembled.
You are now ready to join the major pieces to form the knight. You will need to add a few other pieces. You may cut out and have ready the motons and gorget now, if you wish, but it is best to leave the pauldrons on the page until you need them.
Glue the legs to the body insert in the torso, where marked. Make adjustments if necessary to give the knight's stance a natural look. The feet should be pointed slightly outward. Cut out the belts. Glue the wide belt to circle the hips, and the narrow belt so it hangs diagonally over the wide belt. Cut out the two halves of the sword-and-scabbard, glue them together and glue this piece to the narrow belt so that the scabbard hangs under the left arm.
(Text continues after Plates.)
Wyszukiwarka
Podobne podstrony:
S5002121 Contents VII 9 I. Sito topography 1. Maln features of the sita In the landscape Ust of Figu
6.3. Gymnasium The gymnasium (gimnazjum) was introduced in the school year 1999/2000 as a compulsory
PAL PAL The PAL (Phase Alternating Linę) standard was introduced in the early 1960 s and implemented
New Forms Taschen 005 IntroductionNew GeometriesSetting the Scene: From Post-Modernism to Deconstruc
30 LIBOR STEPANEK1. Introduction The accelerating development of interactive information and communi
Back Cover Before Brave New WorldBefore 1984,,.There was... In the One State of the great Benefactor
image002 “A FINE NOWEL, IN THE GRANO TRAOITION OF THE THRILLER. ..A VERY EXCmNGT)EB lirł^~l -KIM STA
/Materiał and methods Subjecta A total of 20 małe subjects participated in the study; 10 of the subj
62 implied in the whole doctrine of rebirth which proclaims thafc no soul belongs to a family or rac
2.2.3 Primary and secondary services There are two classes of allocation shown in the following Tabl
280 Z. KORUBA ET AL. six degrees of freedom in the discrete model of the system described by ana-lyt
więcej podobnych podstron