41913 Suzuki RM2508
15-22 FRONT FORK AND STEERING
• Clamp the axle holder with a vise. Protect the axle holder with a rag when using a vise.
A WARNING
Clamping the axle holder too tight can damage it which will affect riding stability.
Do not clamp the axle holder too tight.
• Compress the outer tubę by hands and install the conrod holder (special tool) between the axle holder bottom and lock-nut.
frSŚh 09910-20116: Conrod holder
• Insert the push rod into the inner rod.
• Insert the shaped projection of center bolt into the push rod.
< . \ i . \ \ ■ r.
Slowly tum the center bolt clockwise until resistance is felt and check the clearance between the locknut and ćenter bolt
ł i x v * \
to provide morę than 1 mm/(0:04 jn).\ \„> \\>
I }
* i
C::y
• Turn the locknut counterclockwise until it contacts with the center bolt.
• With the locknut held immovable using a wrench? tighten the locknut/center bolt to the specified torque.
H Locknut/center bolt: 22 N m (2.2 kgf-m, 16.0 Ib-ft)
• With the outer tubę compressed by hands, remove the special tool.
\
\
ł
Wyszukiwarka
Podobne podstrony:
suzuki rm25068 15-22 FRONT FORK AND STEERING 15-22 FRONT FORK AND STEERING • Clamp the axle holder
suzuki rm25062 15-16 FRONT FORK AND STEERING • Remove the compression damper unit from the sub-tank
suzuki rm25070 15-24 FRONT FORK AND STEERING • Tighten the fork upper clamp bolts
suzuki rm25072 15-26 FRONT FORK AND STEERING • Remove the steering nut with the s
Suzuki RM2502 15-16 FRONT FORK AND STEERING • Remove the compression damper unit from the sub-tank.
Suzuki RM2500 15-24 FRONT FORK AND STEERING • Tighten the fork upper clamp bolts
Suzuki RM2502 15-26 FRONT FORK AND STEERING • Remove the steering nut with the special tools. IK531
suzuki rm25056 15-10 FRONT FORK AND STEERINGSUSPENSION BALANCE Balancing the front to rear suspensi
suzuki rm25058 15-12 FRONT FORK AND STEERINGDISASSEMBLY • Set rebound and compres
suzuki rm25060 15-14 FRONT FORK AND STEERING • With the outer tubę compressed by hands, remove the
suzuki rm25064 15-18 FRONT FORK AND STEERINGSLIDE BUSHING AND GUIDE BUSHING Inspect the “teflon coa
suzuki rm25066 15-20 FRONT FORK AND STEERING • Apply fork oil to the O-rings and
Suzuki RM2504 15-18 FRONT FORK AND STEERINGSLIDE BUSHING AND GUIDE BUSHING Inspect the “teflon coat
więcej podobnych podstron